Problam with MediaPlayback component

I am using MediaPlayback component. it is showing one small icon  on top right . when it is click MediaPlayback in full screen mode . what is  that icon & how remove that icon.

Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

Similar Messages

  • SetMedia problem with MediaPlayback - external MP3s

    I'm using the MediaPlayback component to play an external MP3
    file, and it's working fine, EXCEPT that when it first loads it
    plays the first part of the clip for a split second, then stops and
    re-plays it -- regardless of the autoPlay settings that are used.
    I have autoPlay set to false, both in the component
    properties panel AND explicitly in the code before the setMedia
    call. In the code below, the trace executes even though I've set
    autoPlay to false.
    I can stop the "blip" from happening if I inject a pause() or
    stop() command after the setMedia() call -- HOWEVER, it happens
    again when I call the play() method to play the file.
    HELP!! Anyone else out there had this problem and solved
    it??? I'm at my wit's end. See code snippet below.
    soundFile = "arabian_dreams.mp3";
    // Make sure media does not start playing 'til we tell it to
    myMedia.autoPlay = false;
    // Set the sound file for the MP3 player
    myMedia.setMedia(soundFile, "MP3");
    // Attempting to fix problem where the setMedia
    // function plays the clip for a fraction of a second
    // on loading, regardless of the autoPlay settings
    //myMedia.pause();
    //myMedia.stop();
    if (myMedia.playing == true) {
    trace("playing!");
    // Now play the sound
    myMedia.play(0);

    How old is the property? It may be that if it's pre60s, it was originally wired for 15amp (round-pin) and was not rewired correctly when converted to 13amp (square pin). It may also be that what you are experiencing with your system is indicative of the sort of wiring degradation that normally warrants a rewire (or partial rewire) of the house.
    There are testers available (Argos, even Tescos in their electrical sections, and other electrical retailers) that will check both grounding and possible wiring defects such as the transposition of live and neutral, but it may also be a wise move to try and isolate the problem as much as possible by connecting your mini to the TV, leaving aside the hard drive and hi-fi, to see if the problem still exists, then juggle components to see if you can determine whether the mini, the drive, the tv or the hi-fi appears to be the primary cause of the problem. It may even help to take the basic system elsewhere, and connect it to someone else's display etc just to test it.

  • When to use FLVPlayback and when to use MediaPlayback component

    Hi,
    I looked at at the FLVPLayback component and the
    MediaPlayback Component and I wonder when one should be used over
    the other? Any experienced designer out there that can tell me?
    thanks
    -Malena

    Hey, My problem with using flvplayback is that SOME windows
    vista computers, and i seriously cannot figure out exactly what it
    is but they will play the flv very choppy and so i had to use
    mediaplayback and it works fine on all computers that i have tested
    it on. it was VERY annoying because my client kept attempting to
    watch video from his computer and it came through as garbage and
    when i watched it, well it was perfect. so i tested it out on
    several different computers and operating systems and found that
    certain computers were just not compatible. I am assuming they were
    just not up to date? i dunno, i have a mac, dont have those
    problems :)

  • Styling / Skinning the MediaPlayback Component

    I've been trying to change the colors on the darn
    MediaPlayback Component for months!!! I've read so many tutorials
    on skinning, styling, etc... but I can't get these stupid colors to
    change. I've managed to style other components using code, using
    themes, etc... but this component won't budge!
    Can someone point me to a method that 100% works? I'm not
    looking to change button shapes, only the colors.. specifically the
    green. If code works for this, I am comfortable with code.
    Anything!
    I'm using Flash 8 Professional.

    :  http://flash.sikotiko.com/2009/05/05/as3-skinning-slider-component/

  • Using skin from mediaplayback component on flvplayback component ?

    Hi.
    Is it possible to use the skin from the mediaplayback
    component on the flvplayback component ?
    (I've been checking online for this but can't find answer
    anywhere.)
    I want to use the flvplayback so as I can keep the movie
    controls within the area of my flv movie.
    The flvplayback is too large with the boarders and the fact
    that the progress/control bar is placed outside of the movie area.
    Any advice would be great. Thanks. Joey

    Hi.
    Is it possible to use the skin from the mediaplayback
    component on the flvplayback component ?
    (I've been checking online for this but can't find answer
    anywhere.)
    I want to use the flvplayback so as I can keep the movie
    controls within the area of my flv movie.
    The flvplayback is too large with the boarders and the fact
    that the progress/control bar is placed outside of the movie area.
    Any advice would be great. Thanks. Joey

  • FLV progressive download and MediaPlayback component???

    Hi
    I have to use FLV and progressive download. I did that with
    the Video Object. That works great. The problem is that Video
    Object does not allow us to control movie volume. It does not give
    many function to control my movie. So the solution should be to use
    the MediaPlayback component that gives me many fonctions, listner,
    ... But how to make it works with a FLV that reside on the server
    but not in Streaming. I need to load it in progressive.
    Any idea.

    It's a snap with Flash 8 Pro. You just attach a skin to the
    FLV with all the components (such as volume, mute, play, and pause)
    and your good to go. Not sure how it works with earlier versions of
    Flash.

  • MediaPlayBack component audio speed

    If, i've following the basic instructions for using the
    mediaPlayBack component:
    drag to stage, set to MP3, target a *.mp3 and publish.
    fla, swf and mp3 are all i the same folder.
    Works fine expect teh mp3 is being played back liek a
    chipmonk - doubel / maybe treble speed etc.
    why? i can't find a setting to control this?
    help, Rich
    Ps. Win XP Pro SP1, Flash Pro 8

    Yes your correct. Here's something I found on the subject:
    From here
    http://odeo.com/help/faq
    What's with the high speed playback on some audio?
    You’ve been chipmunk’d! Sometimes the Macromedia
    Flash player has a hard time dealing with files that are encoded at
    a rate that is not a multiple of 11.025 kHz. The result is what we
    call the “chipmunk” effect. When you download the file,
    it will play normally on your computer or device. Note to audio
    creators: Avoid being chipmunk’d by encoding MP3’s at
    11.025 22.05 or 44.1 kHz.

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How to connect Apple TV (2g) HDMI to HDTV with only component video input.

    Trying to connect Apple TV (2g) HDMI to HDTV with only component video input.  Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
    The TV is HD, but only has a component input and not HDMI.  Apple TV 2g only has HDMI output.

    google component hdmi converter
    but they are pretty expensive and may not work at all
    and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

  • Sub-contracting with chargeable component.

    Hi All,
    I am doing following scenario
    Scenario: Sub-contracting with chargeable component.
    Activity: Clearing (Consumption-Based)
    T Code - /n/SAPNEA/JSCR19
    Amount: 23,100,000
    While action posting, we are getting following error message
    Error Message: E The difference is too large for processing
    Kindly suggest where to do necessary changes in the system.
    Rahul

    Hi,
    This procedure provides the way of manual payment for Subcontract expense.
    I want to clear Accrued revenue by deduction AP using T code /n/SAPNEA/JSCR19
    While posting, I am getting error message “Amount too large to clear", maybe the system set the limit for the tolerance value for clear document. Please suggest me, where to change the settings.
    Rahul

  • Error when creating a Report with Form component

    I am trying to create a new report with form component but when I try to choose the Table/View name I get a web error "404 web not found". I know for a fact that the list is working because I see the list when I create a "simple form". Is this a bug or i need to do something to get it working? thanks

    419008,
    It is a bug that has been identified and will be corrected in an HTML DB patch. There is nothing you can do to correct it.
    This bug is specific to Internet Explorer and utf-8 encoding. It is not a bug with IE, it is a bug with how we handle this for IE.
    Joel

  • Relation with parent components view with child component

    Hi All,
    Can a view controller of  one component can use his child component with the component usage declaration?
    Regards
    Chandra
    Edited by: Chandra Sekhara on Jan 4, 2008 4:26 AM

    Ok got it.
    Nothing much you have to do.
    (1)Go to C1's used component and add C2 as used component.
    (2)It will give you two options manual or CreateOnDemand, if you do not need any kind of values to initiate the C2's view then choose 2nd one.
    If you need some iteration before initiating the view then use manual option.
    you need to write this statement to create the compoment:-
    wdThis.wdGet<used component name>ComponentUsage().createComponent();
    (3) Now go to the window of C1 and embed interfaceview, when you click on this you will get C2's interface view.
    (4) If you want some methods or events to be declared then declare in C2's component controller and copy it to the interface controller.
    Now run your application

  • How to get the contents associated with a component.

    How to get the contents associated with a component.
    Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
    By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

    grab all the code inside the actionPerformed(ActionEvent e) method

  • How to find what are  the  support-teams map with particular componant type

    hi experts,
    i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
    Regards,
    Kumar..

    Hi Kumaresan-
    I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
    The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
    Click on the Responsibilities Tab
    Create your responsibility based on your support team requirements
    Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
    Highlight a responsibility and click Change
    In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

  • Problam with FSV

    Dear Experts-
    I am defing the FSV in that screen i have
    ASSETS
    LIABILITIES
    NO TEXT EXIST----
    NET RESULT PROFIT
    NO TEXT EXIST------NET RESULT LOSS
    NO TEXT EXIST ---P+L RESULT
    NO TEXT EXIST----NOT ASSIGNED..
    IN this i have assigned all asset related gl accounts under different sub-group under assests....it is ok...
    IN Liabilities also i have assigned liabilities related GL accounts...it is ok?
    In Third line...NO TEXT EXIST----
    NET RESULT PROFIT.....i put cursor on that and click on create item it is not creating under that, it is creating below that? it is standard beheviour or any mistakes i did?
    how ever i have created sub group and assigned GL accounts......
    At the time of executing the report...if suppose
    ASSETS -
    100 RS
    lIABLILITIES ARE .....200
    i AM GETTING ON ROW IN REPORT THAT IS A0023  that is the difference between assts and liabilities?
    It is correct to get that field?
    If suppose there is no assets only liabilities we have...i am getting the third row ....No test exist with difference amont??
    Pls tell me basic fundamental os FSV?  I am facing lot of problam with this,....pls tell basic fundamental of this behaviour.....
    Thanks
    Chandu

    Thank you so much...
    I need to change the description of the forst two nodes or not?
    How can i show present year Profit/loss under Liabilities side....beacause there is no GL account for profit or loss...how can i shoe that..pls guide me....
    In the report we are getting difference betwwe assets and liabilities...this is standard functinality?
    Please tell me.........
    Thanks
    Chandu

Maybe you are looking for