Problem Accessing Application Express

Hi All,
I have installed Oracle 11g and Apex 3.2.
After that I tried to access apex admin console using url: http://server:8080/apex/apex_admin
If I try to open the page with IE and when used id : admin and its password is entered and pressed login, an error "Object expected, code 0" is generated.
With Firefox I can see more detail error "doSubmit is not defined.
Please help.
Regards
Rana

Hey I'm having the same problem, but I may be a little confused.
I had 11g installed with Apex 3.0 so I upgraded it to 3.2.1 by using the complete installation. So when the install guide says "Run apex_epg_config.sql passing the file system path to the base directory where the Oracle Application Express software was unzipped", I should point to the Oracle home location where my db is installed...right?
Assuming this is correct, I ran the script but the apex/images folder is still missing the apex_..._.js files mentioned before. All the image files are there but when I try to login nothing happens. Are those js files supposed to be there? Any ideas?

Similar Messages

SQL Command problem in Application Express 3.2.0.00.27

To Oracle Application Express Development Team,
Yesterday I installed Oracle Application Express 3.2.0.00.27.
While doing my r&d, I came across one problem in SQL Command.
For example I wanted to run sql "select * from tab"
When I checked "Autocommit" checkbox it worked fine.
But when I unchecked the "Autocommit" checkbox it gave me following error:
ORA-01003: no statement parsed
Please check post
http://www.oraclebrains.com/2009/03/sql-command-problem-in-application-express-3200027/ for more details.
Cheers

I can't find the log file (a good indication that something went wrong)
Here's the transcript of the session...
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 264242572 bytes
Database Buffers 331350016 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
SQL> @apxpatch.sql
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Wrote file apxset.sql
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
SQL>
SQL> @apxldimg.sql
PL/SQL procedure successfully completed.
Enter value for 1: C:\Documents and Settings\jtench\Desktop\My Downloads\Oracle\apex_3.2.1
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:\Documents and Settings\jtench\Desktop\My Downloads\Oracle\apex_3.2.1/apex/images'
Directory created.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:03:30.03
Directory dropped.
SQL>

Problem with Application Express

Good Morning,
I installed Oracle Application Express, but I have a problem with the first login and the creation of my workspace.
During login using the username 'admin' and pwd as the sys's user because until now the only pwd I configure when I installed Oracle Express 10g and Oracle Application Express.
When I go to login, the page seems not to take any command.
I look a your help. Thanks

Check out the {forum:id=137} forum you'll probably get better help there.
By the way, welcome to the forum! :)

Problems installing Application Express - Help Please

Hi
I have the personal edition of oracle and i have a database instance set up in entreprise manager. Now I'm trying to install application express to the database via SQL Plus. I run into two problems
1. It says in the document that you need to log into SQL as SYS rather than SYSMAN, when I do log in as SYS i get the error message saying that I need to choose either SYSDBA or SYSOPER so I do rather than normal but I need a username/password to log in and I don't know what Username/password they are referring to. I tried a couple of usernames and passwords already and have been unsuccessful.
2. So instead of logging in as SYS, I logged into the SQL Plus as SYSMAN. I load the apexin.sql file onto the SQL Plus and I push on execute. The it asks me to enter the 5 things, so i enter "password, SYSAUX, SYSAUX, temp, /i/" and i get the error message "SP2-0916: Scheme not supported"
I have tried several times already. I am working off a toshiba Satellite P200 and it is windows Vista. What am I do wrong please HELP!
Carol

Hi there I'm still running into some trouble here
When I am logged into my Enterprise Manager as SYS on my laptop
I scroll to the bottom to open up iSQL plus and once I'm in, I get to the iSQL Plus Role Connection and there is 3 choices - 1) Normal 2) SYSOPER 3) SYSDBA
I can log into normal with SYSMAN but when i choose SYS, it tells me that I must choose either SYSOPER or SYSDBA
If I choose either of those, I get another login pop up saying that I need to log into the DBA system, but I don't know what username/password they are referring to. I tried logging into iSQL plus and tried executing sys/<sys password> as sysdba but it doesn't work. Please help!

Problems with "Application Express Accounts" authentication scheme...

Hi.
I'm using Application Express 4.1.1.00.23 on Oracle 10g XE.
I have created and used an authentication scheme based on APEX accounts which worked okay for a while but it now experiencing issues. All the current users are working fine, but I cannot add new ones in the app! Oh, I'm using an APEX generated Access Control page within the app (which I have deleted/recreated to no joy).
If I make changes to a current user I get the expected "1 row(s) updated, 0 row(s) inserted." message and it has indeed worked. If I "Add User" and "Apply Changes", nothing happens... well, the page is seemingly submitted, but no action is taken, no errors are raised, but no user is added.
Curiously, if I both amend a user and add a user before applying changes I get the following -
"1 error has occurred
Current version of data in database has changed since user initiated update process. current row version identifier = "A884FA378C851786DDFE3A33709CB23C" application row version identifier = "234234C67A01764460EDABD366BC4C48" (Row 2)"
The row is mentions is the one I tried to amend. To make matters worse, it's not consistent as another row I tried to amend (at the same time as inserting a new user) gives the following error -
"1 error has occurred
unique constraint (ICTLIVE.APEX_ACCESS_CONTROL_PK) violated (Row 1)"
This update, again, works correctly when I try to update without adding a new user!
Very confused, can anyone help please!
Thanks in advance,
Adam.

Hi, and thanks for the reply.
I have used this successfully before myself... that's why this is confusing me! I have tried recreating the page with the same number and also creating a new page with a new number and the result is the same. It leads me to believe there's something else going on but I have no idea what!
Adam.

Problems accessing application when using SmartView

Hi friends,
Getting the below error while connecting to applications using smart view.Any suggestions could be of very helpful.
Unable to access the application when using SmartView. The user has access to the application DB however:
Either user doesn't get authenticated at all or he gets the following error message:
Cannot open cube view. Analytic Server Error (1051025): User joseph is not permitted to access application 8_RPT
Regards.

You need to provision in Shared Services the user 'Joseph' to have access to the 8_rpt application.

Problem accessing SQL Express 2008 R2 after VS package install

I've written an application package in Visual Studio 2010 which requires SQL Express 2008 R2. I've also created a separate setup package and set SQL Express as a prerequisite. Everything runs as expected except that after the install on target machine
I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script. This happens on WIN 7 and up. I know it is a permissions issue with the default install of SQL but do not know how to otherwise perform the install and make
it work. Looking for someone to walk me through and resolve this issue.

Hi Zanith,
Actually this forum is to discuss the VS IDE issue.
>> Everything runs as expected except that after the install on target machine I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script
Based on your description, the important issue would be related to the permission, as my understanding, it would be related to the SQL Server setup or configuration.
So my suggestion is that you’d better post this issue to the SQL Server forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=sqlgetstarted
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress
I also found two cases about the SQL Server permission issue.
Reference:
http://stackoverflow.com/questions/9185142/sql-server-2008-r2-express-permissions-cannot-create-database-or-modify-users
http://serverfault.com/questions/53645/don-t-have-permission-to-access-sql-server-express-2008
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Locking problems accessing applications on a network drive post upgrade

I recently upgraded to Windows 7 and JDeveloper 11.1.2.0.0
After the upgrade, every time I open an application on a network drive and navigate into one of the projects, I get the following error.
SEVERE: Unable to open environment /H:/dev/wssEmployer_6-22/.data/
com.sleepycat.je.EnvironmentLockedException: (JE 3.3.98) A je.lck file exists in H:\dev\wssEmployer_6-22\.data\00000019 The environment can not be locked for single writer access.Any information I find on the forums regarding this package involves using it in development. Has anyone else seen this? Is there something I have to do on my machine or network to make this work?
Thanks

Actually, it seems to have been a problem with Novell for some reason. Our sys admin created a new network drive to store the working copy on, and this error stops. Thanks for the reply though.

Problem accessing application from portal

I am trying to access an application running on iAS 6 SP2 from iPS 3.0 SP4. App server and the portal server are running on two diff Solaris machines.I am using URL Scrapper. In the application I am trying to get the portal session :
Session lPortalSession          = null;
SessionID lsid               = null;
lsid           = new SessionID(req);
lPortalSession      = Session.getSession( lsid );
But it's throwing me the exception :
com.iplanet.portalserver.session.SessionException: Invalid service host name
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at om.iplanet.portalserver.session.SessionException.<init>(SessionException.java:30)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:564)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:545)
     at com.iplanet.portalserver.session.Session.getSession(Session.java:440)
     at wisper.servlets.security.WisperMainSrv.defaultAction(Compiled Code)
     at wisper.servlets.security.WisperMainSrv.doGet(WisperMainSrv.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
Note : I am able to get the portal session in the application if both the servers(iAS & iPS) are on the same solaris m/c.
Think I have missed some setting on the portal.Any clue ?
Thanks

Hi Karthik,
I followed the article that you mentioned. Now I am getting another exception
com.iplanet.portalserver.session.SessionException: Can't find resource for base name iwtNaming, locale en_US
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at com.iplanet.portalserver.session.SessionException.<init>(SessionException.java:30)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:564)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:545)
     at com.iplanet.portalserver.session.Session.getSession(Session.java:440)
     at wisper.servlets.security.WisperMainSrv.defaultAction(Compiled Code)
     at wisper.servlets.security.WisperMainSrv.doGet(WisperMainSrv.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
What could be the reason ?
Cheers,
Brijesh

Problem accessing Application Ejb Jar files from Apache Axis jars

I have deployed an EAR application, with a structure as shown below,
MyApp.ear
|____ MyApp_Ejb.jar
|____ axis.war
|_____ WEB-INF
|_____ lib (This contains all axis specific jars)
The application deploys just fine. But when i goto happyaxis.jsp and try to view all the web services that have been deployed. I get an exception "No provider type matches QName '{http://xml.apache.org/axis/wsdd/providers/java}SDL".
Here SDL is a custom provider that i have written and all the required files for the provider are available in MyApp_Ejb.jar.
I do not get as to why the axis.jar is not able to find classes in MyApp_Ejb.ear, when both these are in the same ear.
Now i know i can add a utility jar to a war files classpath by adding a classpath line in the War file MANIFEST.MF. But since MyApp_Ejb.jar is defined as a Web Module this solution too doesnt help.
Separating the provider related files from MyApp_Ejb.jar is not possible since there is too much dependance of other files within that jar.
So i am looking for a solution where in i can continue to have MyApp_Ejb.jar as my ejb module as well as the axis related jars can find the required classes within MyApp_Ejb.jar. some way of sharing the ejb jar across to axis jars.
Thanks in advance.
Vicky

I have deployed an EAR application, with a structure as shown below,
MyApp.ear
|____ MyApp_Ejb.jar
|____ axis.war
|_____ WEB-INF
|_____ lib (This contains all axis specific jars)
The application deploys just fine. But when i goto happyaxis.jsp and try to view all the web services that have been deployed. I get an exception "No provider type matches QName '{http://xml.apache.org/axis/wsdd/providers/java}SDL".
Here SDL is a custom provider that i have written and all the required files for the provider are available in MyApp_Ejb.jar.
I do not get as to why the axis.jar is not able to find classes in MyApp_Ejb.ear, when both these are in the same ear.
Now i know i can add a utility jar to a war files classpath by adding a classpath line in the War file MANIFEST.MF. But since MyApp_Ejb.jar is defined as a Web Module this solution too doesnt help.
Separating the provider related files from MyApp_Ejb.jar is not possible since there is too much dependance of other files within that jar.
So i am looking for a solution where in i can continue to have MyApp_Ejb.jar as my ejb module as well as the axis related jars can find the required classes within MyApp_Ejb.jar. some way of sharing the ejb jar across to axis jars.
Thanks in advance.
Vicky

Problem Accessing Application if deployADF application to standaloneOC4J

I just tried to do the OBE Jdeveloper sample Deploying J2EE and ADF Applications
Everything worked fine with deploying to a stand alone OC4J including the last point to deploy ADF view controller project from a WAR file.according to Jdeveloper log
Use the following context root(s) to test your web application(s):
http://jp:8888/adfapp
Elapsed time for deployment: 33 seconds
---- Deployment finished. ---- 14 nov. 2004 14:09:21
However when I try the above url I get an HTPP 403 not authorized (i logged on Windows 2K as an oracle admin as I usually do)
Don't see the reason of it.
Application has its own logging procedure.
Thanks.

Hi Karthik,
I followed the article that you mentioned. Now I am getting another exception
com.iplanet.portalserver.session.SessionException: Can't find resource for base name iwtNaming, locale en_US
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at com.iplanet.portalserver.session.SessionException.<init>(SessionException.java:30)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:564)
     at com.iplanet.portalserver.session.Session.getSessionServiceURL(Session.java:545)
     at com.iplanet.portalserver.session.Session.getSession(Session.java:440)
     at wisper.servlets.security.WisperMainSrv.defaultAction(Compiled Code)
     at wisper.servlets.security.WisperMainSrv.doGet(WisperMainSrv.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
What could be the reason ?
Cheers,
Brijesh

Allignment problem in application express tree region

hi,
     i have an issue regarding the tree regions allignment in a page. i tried to create a simple tree region with the basic code given below..
select case when connect_by_isleaf = 1 then 0
       when level = 1             then 1
       else                           -1
       end as status,
       level,
       'xxx'   as title,
       null as icon,
       "RECORD1" as value,
       null as tooltip,
       null as link
from "#OWNER#"."TABLE_TREE"
where ex_id = :EX_ID
start with "RECORD2" is null and ex_id = :EX_ID
connect by prior "RECORD1" = "RECORD2" and ex_id = :EX_ID
for the above code used in the tree region type i got the following tree structure.
the above trees structure display the child records from same parent are not coming in same allignment. the child record with no further child is coming with a space before the record and a child record with further childs to it is getting displayed from the starting of the line.
please help me out.

i am unable to attache screen shots. please find the screen shots here
link: http://postimg.org/image/uasvm7nlt/

Problem using Interactive Report in Application Express 3.2.1.00.11

Hi All ,
I am using Interactive Report in Application Express 3.2.1.00.11
I have made report as editable by using following query
Select ROWID,
APEX_ITEM.CHECKBOX(1,IDSKILL,'UNCHECKED') "Mark",
APEX_ITEM.TEXT(2,IDSKILL)"IDSKILL",
APEX_ITEM.TEXT(3,SKILL) "SKILL",
APEX_ITEM.SELECT_LIST_FROM_LOV(4,IDBEARBEITER,'DIR_LOV'),
APEX_ITEM.TEXT(5,ÄNDERUNGSDATUM)"ÄNDERUNGSDATUM"
from SKILLS
Problem :-
When I click FILTER option in Interactive Report , It is taking under Expression "<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />" and displaying in search filter as
Skill = '<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />'
Can I make display like Skill ="ARIS"
Any suggestion is welcom ..
Thanks in advance
Cheers
Sachin Srivastava

Hi,
As I know there is no fix/workaround for that.
Disable filtering and other stuff is only. But I think you of course like have filters and other nice thing of interactive report. Other vice you have done classic report.
It is better use classic report and build own custom filers.
Br, Jari

Problem while importing the application in application express 3.0

Hi Friends
We have developed an application in a workspace say X. I imported the complete application in different workspace Y and the import was successfully. Now if I export a single page from that application in workspace X and import in workspace Y, then it gives me error as
"This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application."
Also I tried changing the application id in the export file but did not work.
Is their a workaround for this?
(We are using application express 3.0.0.00.20)
Thanks
Minakshi

Hi Scott
1 ) Page exports are to be imported into an application having the same ID as the source application in the same named worskpace.
But the problem is I cannot have same application id in the same workspace or in different workspaces even. I exported the complete application from workspace X with application id as 555 and tried importing the application in workspace Y with the same application id. But that does not work since it throws the error message as the same application id cannot reside in 2 different workspaces.
2) You don't say whether workspaces X and Y are in the same or different databases.
Both the workspaces X and Y are in the same database. The database user/schema that is associated with workspaces X and Y are different.
3) Also I tried changing the application id in the export file but did not work.
Following is the extract of the page that i tried importing. The places wherever it is marked BOLD, i modified them in the original page export sql file.
--application/set_environment
prompt APPLICATION 500 - Load_Factor_System
-- Application Export:
-- Application: 500
-- Name: Load_Factor_System
-- Date and Time: 15:52 Wednesday May 16, 2007
-- Exported By: ADMIN
-- Flashback: 0
-- Export Type: Page Export
-- Version: 3.0.0.00.20
-- SET APPLICATION ID
wwv_flow.g_flow_id := 500;
wwv_flow_api.g_id_offset := 0;
null;
In case you need further clarifications, please let us know.
Regards
Minakshi

Configuring Problem in Oracle Application Express 3.0 Print Server

hi all,
Configuring for my Oracle Application Express Print Server in apex 3.0 I have used apache foa and made all steps in the documentation
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
the print attribute works but I have a problem in the pdf print with characters.
My reports columns characters are turkish and when I linked to print pdf the print the turkish characters are seeming #
and I try to change in the script apex_fop_render.jsp I changed the encode but the problem was not solved.Can you help please urgently!
I am waiting your helps!

Apache FOP does not support some character sets out of the box, i.e. Asian languages require additional configuration steps. Not sure about those non-standard ISO characters in the Turkish alphabet though. But since you’re writing that those are returned as #, looks like the same problem. There should be information available on the Internet on how to configure those fonts and character sets with Apache FOP. Once BI Publisher is out, using that as the rendering engine with APEX might be another alternative to consider, as that product will support this out of the box.
Regards,
Marc

Problem Accessing Application Express

Similar Messages

Maybe you are looking for