Problem accessing ECC 6.0 with Crystal

Hi,
I installed SAP INtegration Kit for BO and the transports etc., Then i tried to access ECC via Crystal 2008. I choose the new connection for 'Sap table, cluster or function" which when connected showing me three groups CL,DD,FN which donot have the tables i'm expecting. Can someone direct me here to the right path.
Thanks a lot!

Hi,
when you setup the connection you can right-click on the connection, open the options and there is a field called "Table name like" where you can enter a filter for the tables. for example VB% as filter for all tables starting with VB.
try that and see if you get your table names. the reason is that there are more than 30000 tables and we stop at one point reading the complete list - thats why there is a filter
Ingo

Similar Messages

TS4001 Anybody having problems accessing Adwords Exspress login with Safari ?

Anybody having problems accessing Adwords Exspress login with Safari ?

Hi jhankins,
There was a problem yesterday for a brief half an hour to 1 hour, please let us know if you are still facing that issue.
-Ankit

Problem accessing Sql server Procedure from Crystal with JDBC driver

I have some Crystal reports using SQL Server procedures, most of them are working very well; however, I have 2 that have problems accessing sql server procedures. These reports are working using OLE DB connection without problem, but when I try to relocate the connection to JDBC Crystal generates an error like that the procedure not return records.
The procedure is working with other products including OLE DB connections from crystal.
What can I do?
Thanks in Advance,
JaimeC

I am using:
Crystal report 11 - 11.0.0.1282 and Crystal 2008 = 12.0.0.683
SQL Server 2005 - Microsoft SQL Server Management Studio Express 9.00.4035.00
Windows XP
I have discovered that the procedures create and work temporary tables. In other cases when is working ok, the procedures have not working temporary tables.
Thanks,
Jaime Carrillo

Having problem accessing MacMini over network with PC's Windows 7

Hi all,
I have a Mac Mini with 10.6.x
Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
I came across as i was searching for this issue and it seems that authentication - Golden triangle or whatever is called - might be the issue in the whole mess. Do you guys think that this might be the case ?
The only way i have found out to help is to restart the Router and Server and that usually fix the problem .
Could you please help me figure what is going on there?
Here is the original thread: https://discussions.apple.com/thread/3867559?tstart=0 ( i think i posted in the wrong forum )

The specified changeip -checkhostname command does not make changes to your configuration.
To research the command (and that's entirely your perogative), please use Google or Bing to search for previous discussions and details, or review the provided man page documentation for the command. (Launch Terminal.app (folder Applications > Utilities) and issue the command man changeip. You'll see something like this:
$ man changeip
changeip(8)               BSD System Manager's Manual              changeip(8)
NAME
     changeip -- Change service configuration files with hard-coded IP addresses
SYNOPSIS
     changeip [-v] [-d path] old-ip new-ip [old-hostname new-hostname]
     changeip -checkhostname
     changeip -h
DESCRIPTION
     changeip is used to manually update configuration records when a server's IP address or hostname changed in a way that affected services were unable to properly process, for example when the server is behind a NAT device and the WAN identity changed. ...
Given your response and your concern, consider creating a backup of your disk. Shut down, boot the installation DVD, and use Disk Utility (from the Utilities menu) in the second screen of the installation process to copy your disk contents to an external storage device. (Time Machine isn't as good at getting a backup of a server as is a clean backup created while shut down.) There are descriptions around that detail how to create this backup using Disk Utility.
There is no DNS server implemented in the Airport Extreme. The Airport Extreme forwards DNS requests to a DNS server elsewhere. Few gateway devices contain DNS servers; that these devices request a DNS address tends to be confusing, too. That address is solicited from the user for use in the DHCP server that many of the available gateway devices provide.
There is no need for a DNS forwarder, particularly if your server is configured for your LAN. (Adding a forwarder adds another hop into the whole translation process. That configuration and that extra hop can be useful when the intermediate DNS server is providing specific, enhanced DNS-related functions, such as security monitoring and logging, or providing a "nanny filter" mechanism.)
If you are running DNS services on your LAN, then your Airport Extreme DHCP server should be configured to pass out the IP address of your DNS server.
It would appear that your local box has the default self-hosted DNS, and is not configured to serve LAN DNS (other than for itself). That's good. Accordingly, it'll likely be getting good DNS from itself, but will not be getting translations for other hosts on your network. That's not so good. When DNS responses are not available, you'll get DNS-level timeouts, and those are usually around 30 seconds each.
Check your server logs for messages related to the failed connections, and check the Windows file service logs for any errors being generated by the file service. The log information is most easily available from Console.app, which is a utility in Applications > Utilities folder, or from the Server Admin tool (Applications > Server folder) for DNS, and for the file server component.
The above is probably going to read like a wall of unfamiliar jargon, so please ignore this and my previous response here, and I'll leave it to somebody else to assist you here.

Problem:Accessing the file system with servlets ???

Hi...
I have a strange problem with my servlets that run on Win2000 with Apache and 2 Tomcat instances.
I cannot open files through servlets whereas exactly the same code lines work in local standalone java programm.
It seems to be somehting like a rights problem...but I dont know what to do.
thanks for any help
here are my configuration files for Apache and Tomcat:
Apache: *******************************************************
### Section 1: Global Environment
ServerRoot "D:/Webserver_and_Applications/Apache2"
PidFile logs/httpd.pid
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule jk_module modules/mod_jk.dll
JkWorkersFile conf/workers.properties
JkLogFile logs/mod_jk.log
JkLogLevel info
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule userdir_module modules/mod_userdir.so
### Section 2: 'Main' server configuration
ServerAdmin [email protected]
ServerName www.testnet.com:80
UseCanonicalName Off
DocumentRoot "D:/Webserver_and_Applications/root"
JkMount /*.jsp loadbalancer
JkMount /servlet/* loadbalancer
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory "D:/Webserver_and_Applications/root">
Order allow,deny
Allow from all
</Directory>
UserDir "My Documents/My Website"
DirectoryIndex index.html index.html.var
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
TypesConfig conf/mime.types
DefaultType text/plain
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
HostnameLookups Off
ErrorLog logs/error.log
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog logs/access.log common
ServerTokens Full
ServerSignature On
Alias /icons/ "D:/Webserver_and_Applications/Apache2/icons/"
<Directory "D:/Webserver_and_Applications/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /manual "D:/Webserver_and_Applications/Apache2/manual"
<Directory "D:/Webserver_and_Applications/Apache2/manual">
Options Indexes FollowSymLinks MultiViews IncludesNoExec
AddOutputFilter Includes html
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ScriptAlias /cgi-bin/ "d:/webserver_and_applications/root/cgi-bin/"
<Directory "D:/Webserver_and_Applications/root/cgi-bin/">
AllowOverride None
Options Indexes FollowSymLinks MultiViews
Order allow,deny
Allow from all
</Directory>
IndexOptions FancyIndexing VersionSort
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
ForceLanguagePriority Prefer Fallback
AddDefaultCharset ISO-8859-1
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
AddType application/x-tar .tgz
AddType image/x-icon .ico
AddHandler type-map var
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
<IfModule mod_ssl.c>
Include conf/ssl.conf
</IfModule>
ScriptAlias /php/ "d:/webserver_and_applications/php/"
AddType application/x-httpd-php .php
Action application/x-httpd-php "/php/php.exe"
Tomcat:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
<Server port="11005" shutdown="SHUTDOWN" debug="0">

<Service name="Tomcat-Standalone">

<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="11009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>

<Engine jvmRoute="tomcat1" name="Standalone" defaultHost="localhost" debug="0">

<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Realm className="org.apache.catalina.realm.MemoryRealm" />

<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true">
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common"/>
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>

<Context path="" docBase="d:/webserver_and_applications/root" debug="0"/>

<Context path="/manager" docBase="manager"
debug="0" privileged="true"/>
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>user</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>driverName</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>

<Service name="Tomcat-Apache">
<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>
</Engine>
</Service>
</Server>
*** and here is my workers.properties : *******************************
# workers.properties
# In Unix, we use forward slashes:
ps=/
# list the workers by name
worker.list=tomcat1, tomcat2, loadbalancer
# First tomcat server
worker.tomcat1.port=11009
worker.tomcat1.host=localhost
worker.tomcat1.type=ajp13
# Specify the size of the open connection cache.
#worker.tomcat1.cachesize
# Specifies the load balance factor when used with
# a load balancing worker.
# Note:
# ----> lbfactor must be > 0
# ----> Low lbfactor means less work done by the worker.
worker.tomcat1.lbfactor=100
# Second tomcat server
worker.tomcat2.port=12009
worker.tomcat2.host=localhost
worker.tomcat2.type=ajp13
# Specify the size of the open connection cache.
#worker.tomcat2.cachesize
# Specifies the load balance factor when used with
# a load balancing worker.
# Note:
# ----> lbfactor must be > 0
# ----> Low lbfactor means less work done by the worker.
worker.tomcat2.lbfactor=100
# Load Balancer worker
# The loadbalancer (type lb) worker performs weighted round-robin
# load balancing with sticky sessions.
# Note:
# ----> If a worker dies, the load balancer will check its state
# once in a while. Until then all work is redirected to peer
# worker.
worker.loadbalancer.type=lb
worker.loadbalancer.balanced_workers=tomcat1, tomcat2
# END workers.properties
thanks again

Hi joshman,
no I didn't get error messages as the relevant lines for reading/writing where between try statements, but you were where right it was/is just a simple path problem.
I expected the refering directory without using a path to be the directory where the servlet is in, but it is not !!??
Do you know if I set this in the setclasspath.bat of tomcat ?
*** set JAVA_ENDORSED_DIRS=%BASEDIR%\bin;%BASEDIR%\common\lib ***
thanks again
Huma

Problems accessing windows share folders with iMac joined to the domain

Hi,
Following the Apple Seminar (http://seminars.apple.com/seminarsonline/addamac/apple/index.html?s=300) I've joined an iMac (10.6.2) to a Windows Domain successfully and I can login with my windows account.
The problem arises when I try to mount a share folder. Mac ask me if I want to access as a guest or as a registered user, and it's really weird since the folder belongs to the windows user. It seems like Mac doesn't use the login account to access the share folders...
Regards,

Hi,
I'm trying to use the Connect to Server > smb://ipaddressoftheserver (smb://192.168.100.1/implementaciones) but it ask me for the authentication again....
It seems there is a problem with Snow Leopard and AD with .local domains. I've trying this solution:
http://www.edugeek.net/forums/mac/43879-snow-leopard-ad-integration-woes.html#po st549033
Regards,

Error on accessing SAP BW query with Crystal Reports 2008: Kein Fehler

Hi,
I want to create a Crystal 2008 report with SAP BW data.
The query is set to allow external access and using the BW toolbar in Crystal, I can connect to the SAP BW system and select the query. But then the following message appears:
Fehler bei der Erstellung einer neuen Berichtsvorlage.
Kein Fehler.
COM exception caught in CExtToolBar::InitializeGlobalData(). HR = 0x0388bb27
The message is always in German, no matter if I'm logged on in English.
What's wrong? Do I have to install something else? Is something missing?
Thanks and best regards,
Heiko

Hi everybody,
I just made an authorization trace.
11:45:37:272 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=SYST;ACTVT=16;
11:45:38:750 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=SUSO;ACTVT=16;
11:45:38:765 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=SUNI;ACTVT=16;
11:45:38:782 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RSCR;ACTVT=16;
11:45:38:793 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=SH3A;ACTVT=16;
11:45:39:63 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RFC1;ACTVT=16;
11:45:39:83 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RFCH;ACTVT=16;
11:45:39:228 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RZX0;ACTVT=16;
11:45:39:228 AUTH    - - -   S_RS_RSTT RC=0 RSTTBOBJ=TRACE;USER=OSD03VJ0;ACTVT=01;
11:45:39:233 AUTH    - - -   S_RS_TOOLS RC=0 COMMAND=WEBPUBLISH;
11:45:39:238 AUTH    - - -   S_RS_FOLD RC=0 SUP_FOLDER=' ';
11:45:49:102 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RZX2;ACTVT=16;
11:45:51:707 AUTH    - - -   S_RFC      RC=0 RFC_TYPE=FUGR;RFC_NAME=RS_PERS_BOD;ACTVT=16;
Every row was green.
There were no conflicts or missing rights.
Regards,
Sebastian

Problem accessing iTunes for apps with new iPad

New iPad connects to and works fine with home wifi except when trying to download apps. Then I get message that I cannot connect to iTunes. Don't have this problem when using public wifi.

https://discussions.apple.com/message/18247628#18247628

Problem accessing Infosets using Query with SQL

Hi,
I have Lumira desktop version 1.18.0.
Using the Query with SQL connection, I successfully connected to SAP R/3 6. I was able to view the User Groups under CATALOG_VIEW, but it seems I cannot go beyong this point and select an Infoset. When I click on an Infoset I expect the Query pane to be populated with the SQL statement but nothing happens.
I attached a screenshot for clarification
Thanks
Dany

Hi Dany,
A suggestion for you would be to use another client tool & check if the behavior is the same. I suggest that you use Information Design Tool (from BOE 4.1), create a connection to your ERP, then a data foundation on top of that connection and check if the behavior is the same. This way we can isolate if the problem is caused by the client tool or by the backend.
My 2 cents
Antoine

Are there any known problems accessing yahoo e-mails with firefox 8.0?

Windows XP SP3
firewall is checkpoint integrity client
anti virus is avast
can log on to yahoo and view inbox OK, but when I try to open an e-mail I get the following message:
Sorry, your session has expired. To protect your account, you need to confirm your password periodically.Sign In Again
The sign in button does nothing, I can sign out OK , but the problem persists when I log on again.
This happens with all yahoo e-mail accounts
Yahoo email works OK running under google chrome. Both browsers have the same proxy settings (system settings).

Found the answer. When the username is an LDAP DN it needs to be proceeded by "dn:".
example: username="dn:uid=bgbrown,ou=people,dc=siroe,dc=com"
The server also accepts a simple uid value.
example: username="bgbrown"

Problem to connect SAP tables with Crystal report 2011

Hi,
I am new in Crystal report,
I Install CR 2011 in my PC now when I make a new connection under path FIle->New->Blank Report I choose SAP Table,Cluster or Function
here I give Clint,User and Password and try to connect then following msg will display
Logon Failed.
Details: You do not have necessary rights to design report against the SAP system . Please check with your System Administrator.

Hi,
Step 1:After Clicking SAP BW Query, you need to goto SAP tab from the context menu and click on
Step 2: Create New Report from a Query
Step 3: Click on OLAP tab, Here you can select your Cube and select SAP Business Information Warehouse
Step 4: Go back to SAP tab and click on Start BW Query Designer(this allows selection of the cube from the Query designer Interface)
You will understand automatically about further steps once you are able to follow the above steps............
Regards,
Suman

Problem accessing DS 5.1 with SSL using Java

Hi,
Could you share with me some guidelines to connect my Java App with my DS 5.1 using SSL?
My code is:
import netscape.ldap.*;
import netscape.ldap.factory.*;
import org.mozilla.jss.ssl.*;
public class SSLSample {
String host;
String user;
String password;
public static final int SSL_PORT = 636;
public static final String FILTER = "(&(objectclass=inetOrgPerson)(uid=";
public static final String BASEDN = "dc=siroe,dc=com";
SSLSample(String h, String u, String p){
host = h;
user = u;
password = p;
void run(){
LDAPConnection ld = null;
String dn = null;
try {
ld = new LDAPConnection(new JSSESocketFactory(null));
ld.connect(host, SSL_PORT);
String filter = FILTER + user + "))";
System.err.println("Is connected?: " + ld.isConnected());
LDAPSearchResults res = ld.search (BASEDN, LDAPv2.SCOPE_SUB, filter, null, false);
System.err.println("res: " + res);
if (res != null && res.hasMoreElements ()){
LDAPEntry entry = res.next();
dn = entry.getDN();
System.out.println("User's DN: " + dn);
} catch(LDAPException e){
e.printStackTrace();
} catch(Exception e2){
e2.printStackTrace();
} finally {
try {
ld.finalize();
} catch (Exception ex) { }
public static void main(String [] args){
if (args.length != 3){
System.out.println("Usage: SSLSample <server> <user> <passwd>");
System.exit(-1);
SSLSample s = new SSLSample(args[0], args[1], args[2]);
try {
s.run();
} catch (Exception e){
e.printStackTrace();
The answer of my Output Windows is:
Is connected?: true
netscape.ldap.LDAPException: The connection is not available (80); Unknown error
at netscape.ldap.LDAPConnection.sendRequest(LDAPConnection.java:1809)
at netscape.ldap.LDAPConnection.search(LDAPConnection.java:2520)
at netscape.ldap.LDAPConnection.search(LDAPConnection.java:2402)
at SSLSample.run(SSLSample.java:40)
at SSLSample.main(SSLSample.java:69)
Press any key to continue . . .
And the access log in the IPlanet 5.1 Directory Server is:
[01/Oct/2002:22:22:04 -0500] conn=2 fd=896 slot=896 SSL connection from 192.168.0.100 to 192.168.0.100
[01/Oct/2002:22:22:04 -0500] conn=2 SSL 128-bit RC4
[01/Oct/2002:22:22:04 -0500] conn=2 op=0 SRCH base="dc=siroe,dc=com" scope=2
filter="(&(objectClass=inetOrgPerson)(uid=jwalker))" attrs=ALL
[01/Oct/2002:22:22:04 -0500] conn=2 op=0 RESULT err=0 tag=101 nentries=1 etime=0
[01/Oct/2002:22:22:20 -0500] conn=2 op=1 fd=896 closed - A1
[01/Oct/2002:23:02:27 -0500] conn=3 fd=896 slot=896 SSL connection from 192.168.0.100 to 192.168.0.100
[01/Oct/2002:23:02:28 -0500] conn=3 op=0 fd=896 closed - A1
Please, I will appreciate you all information you could give me.
Best regards,
Gregorio

Do you meant there is no 'subwoofer' in the mixer settings when you set it to 4 speakers (or Quad mode)?
Its normal. Perfectly normal. Nothing wrong with it. Trust me on that

With Lion, Problems Accessing Shared NTFS Folders with SMB://

We are testing a local login script that we created for our Macintosh users on Lion. It has worked fine on all OS X versions prior to 10.7. Listed below is the script that we are using. When we run the script, it now mounts a folder called "home" instead of "username" and throws an error stating that "The folder can't be opened because you don't have permissions to see its contents." I have referenced the following Apple document and it was not helpful in resolving the issue.
The following is the share path that we are trying to mount to in the script:
/home/username
and the following NTFS permissions have been provided to the respectively listed directories.
/home -- All users can Read attributes, Read extended attributes, Read permissions
/home/username -- All users have full control of this folder
Here is the script that we place in /usr/local/sbin:
#!/bin/bash
clear
username="$(whoami)"
IP="$(dig $HOSTNAME +short)"
VOLUMES="/Volumes/Workarea /Volumes/$username"
for volume in $VOLUMES ; do
    [ -d $volume ] && umount -f $volume
done
if [ "$username" != "adminuser" ] && [ "$username" != "setupuser" ]; then
    osascript -e "try" -e "mount volume \"smb://domain.com/Workarea\"" -e "end try"
    osascript -e "try" -e "mount volume \"smb://domain.com/home/"$username\" -e "end try"
fi
killall -u $username Terminal
I am not sure what additional NTFS permissions need to be provided or if we have something that we need to edit in our script since Apple changed some of the SAMBA items in Lion.

Cross posted to here in case there is some additional ideas that come from a different community of Apple folks.

ECC 6.0 HCM / Crystall Reports

Hello :
I would like to know if we can use CR2008 with HCM in some scenarious instead of Standard SQ01/SQ02/SQ03 and infosets queries.
If am aware that we need ODBC if we connect with Access or any other source.
How do we connect ECC 6.0 with Crystall reports.
Can some one provide me steps to connect Crystall reports to use tables in ECC 6 eg: any Tables in T OCE SE16 with PA0001 etc.
Thanks

Hello,
Not sure what all those acronyms are but possibly if they are SAP data sources then you should post your question to the Integration Kit forum here:
BusinessObjects Integration Kits
If not then typically if you use ODBC CR can report off the data sources, otherwise please explain what those mean?
Thank you
Don

Crystal Report against ECC 6.0 with SSO configured

I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?

We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers.

Problem accessing ECC 6.0 with Crystal

Similar Messages

Maybe you are looking for