Problem after 9.2 / 8.17 updating - proxy authentication returns

We just updated to 9.2 and 8.1.7 of Acrobat and Adobe Reader on our SME network (Windows XP SP3  clients connected to Microsoft SBS2003 Premium server, so a typical SME setup).
When I then tried the usual [Check for Updates] I was unpleasantly surprised to see a previous problem appear - Acrobat and Adobe Reader both refused to connect to the internet without manual authentication to the Proxy Server (even when an admin account was logged in already). SBS2003 uses ISA as a proxy server, which works fine with all modern apps.
This was a major problem with Acrobat/Reader (and CS) until fairly recently when I assume the teams responded to complaints and modified the apps so that updates could occur without someone manually traipsing around client machines to enter authentication details.
Now we are back to square one - can someone please advise if this issue is 'accidental' (and hopefully therefore to soon be remedied) or if it was a deliberate move?
If the latter, I'd be interested to hear the justification behind it - it is making Reader in particular more trouble than it is worth to install.

Finally found another tread on this obscure problem -- I don't know why Adobe doesn't have a KB on this issue that their update causes.
I added *.adobe.com to the ISA server rules then the clients could run updater fine again.

Similar Messages

  • Email Account Problems after iOS 5.0.1 update on iPad 2 & iPhone 4

    After finishing the iOS 5.0.1 update - I have noticed none of my email accounts are working (i.e. Error saying Incorrent Password or Username).
    I have deleted the associated accounts and added them once again, verifying both username and passwords as well and now it will NOT verify any accounts on both. Still no luck on both devices.
    Odd that both devices email accounts stop working after the new update?
    Anyone know of a fix/problem?
    Thanks!

    Same problem, this happens with any Safari site that requires a user name and password to log in ... frustrating!  I have also posted this issue and will be stopping by Apple on my way home ... I'll let you know what I find out.

  • Mouse problems after 11/29/05 Security Update?

    I installed the 11/29/2005 Security Update 2005-009 via Software Update. Right afterwards (even before the required reboot), I began having mouse oddities. The cursor disappears from the screen, or just stays there and doesn't move. Moving the mouse won't make the cursor move. I must click the mouse before the cursor "wakes up" and responds to the mouse. It's fine after that.
    I'm using a Logitech cordless optical mouse. Batteries are fresh and this only begain right after installing the Security Update. Anyone else experiencing this?
    [ Edited by Apple Discussions Moderator; added update ID 2005-009 ]

    I have resolved the issue! As I mentioned, I am using a Logitech cordless optical mouse. I connected up my Apple keyboard & mouse and disconnected the Logitech. The problem no longer occurred with the Apple mouse.
    I removed the batteries from the Logitech mouse and disconnected the USB receiver. Restarted the computer, reconnected the Logitech setup, disconnected the Apple stuff, and now it is working.

  • Problem after installing 6.0.2 update

    Hello,
    I have installed Design Standard CS4 on MacOS. The serial number was accepted and everything worked fine.
    After installing InDesign 6.0.2 update, InDesign works in demo version because it does not accept serial number. Other applications works fine.
    What can be the problem?
    Regards.

    I also have this same issue with my Mac. I even uninstalled the entire Design Premium CS4 and everything in Indesign CS4 works fine.  AS soon as I load the 6.0.2, it just messed the licensing for some reasons.
    I haven't got my Mac on me yet but I am thinking that it may have something to do with the cache.db file where most licensing issue occurs.  If you like, try navigating to the location below:
    Macintosh HD > Library > Application Support > Adobe > Adobe PCD > Cache
    Inside the cache folder, move the cache.db file out of this folder.  Launch Indesign and you will be getting the License Agreement.  Accept it and see if you will be allowed to enter your serial number again.

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • WiFi Problem after iOS 4.3.3 update

    Hi
    After the update to the IOS 4.3.3 all of the IPAD 2 from my company(six IPAD 2) I started to have many problems connecting to wireless network from my company.I saw that the IOS 4.3.4 the bug persists.
    I would to now if the IOS 4.3.5 fix this BUg or i have to wait until IOS 5.
    Regards
    VC
    iPad

    First, Thank you for the support that you are given me related to this situation,but you have to understand my reluctance to accept that this is not a IOS problem because all the six / seven have the same problem.
    (five minutes after)
    I tested a new connect using WEP and I coul connect with problem.When i try to use WP2-PSK, no connection.This situation in both technologies(Cisco and Alcatel)

  • Erase and Install problems after fixing 10.4.5 update issues

    Initially, I had permission issues after upgrading to 10.4.5. After hours of reconfiguring user accounts, I thought that maybe the best overall solution would be to erase and reinstall Tiger. I am an old PC user so reformatting the hard drive can be a logical answer.
    I backed up all of files and ran disk utility and erased with the "0s" option. I am using my install disc of 10.4.2. I have tried several start modes, single-user, C, Option, verbose and still run into the same problem. The installation does not go beyond verifying the drive to install it on. I have tried some steps in the disk utility.
    I know that there is probably a command line to get the installation disc to recognize the hard drive but I am not experienced in Unix commands.
    Does anyone have any suggestions? I am in an endless circle of starting, quitting, and restarting the installation just to get to Disk Utility. So far I have not had any problems with Macs or with Tiger. I am a Mac convert.
    Thank you very much.

    Don't know what exactly fixed it, but a few weeks down the line and several random updates later (10.4.4, Quicktime, various apps) I tried the speakers again and they are working fine - the system recognises them, alerts work fine etc.

  • Problems after installing 10.5.2 update

    Any one else getting error messages via Disk Utility of various types after installing latest update. Going from a clean install with a clean bill of health, to bad directory messages after installing update 10.5.2.
    Input/ output errors, etc
    ACL errors- I've never seen this until installing 10.5.2.
    I also get corrupted directory errors that disk utility is unable to repair disk.
    imac G5 takes at about 5 Minutes to start up and for desktop to become active.
    I wonder if these are common experiences with Non-intel Leopard 10.5.2 users, or are these issues common to everyone that installed the update?

    here was little space on my startupdrive so I suspect that this caused the problem.
    That's a big time problem. You may have to connect another Mac to your laptop and boot your laptop into FireWire mode to clear out about 10 GB of space on it and then run the 10.5.2 Combo updater from the other Mac. That's one of the problems with having Software Update being automatic. I never use it.
    OT

  • Anyone getting print colour problems after Mac 10.6.8 Update?

    Since June 29, when we downloaded the latest Apple OS X update, prints on all four papers I use - and have custom profiles for - have developed a green cast out of our Epson R1900. Can't help thinking that this caused by the Epson Printer Software Update (# 2.7) that was part of that Apple update. There are reams of complaints over on the Photoshop Mac forum about this update causing printers to stop completely; but none citing colour problems.
    Seems complicated - according to Apple - by the fact that the Epsom driver that Update 2.7 replaced, will not work with OS X 10.6.8. To back track one has to back track the complete OS to 6.7. Something to do with Snow Leopard being made ready for Lion.
    Oh, and yes - I have recalibrated my screen since the update; and yes, have exhaustively run all the maintenance tasks on the R1900.

    Seems we have sorted the problem, and I thought it might warrant us sharing that - particularly as it was less than obvious. We use four paper types and have pre-sets for each in the Print Module. Actually eight presets as the four are duplicated for two paper sizes. Each pre-set includes a custom-made ICC profile for the paper/printer (an Epson R1900).
    Following the Apple Software Update to OS X 10.6.8, there appeared a noticeable blue/green cast over all newly made prints. Nothing in the Lr3 printing process appeared to change; and so the conclusion was that something had changed in the new Epson printer driver that accompanied the update. Some time and effort was expended with Apple investigating a backtrack to 10.6.7, which proved fruitless for too complicated a reason to go into here.
    Left with seeking an alternative answer, we deleted the printer and reinstalled using the original disk; opting to take the offered driver update. This resulted in driver 6.20 being loaded - the same as had been causing all the grief. However, when we came to check the Print Settings dropdown - after specifying the appropriate preset - to make sure it specified 'no colour correction', it was obvious that the ICC profile had not been recognised, although the Page Settings for the preset had. Each box in the dropdown merely contained the default - plain paper, Colorsync, etc. Manually entering all the criteria in Print Settings - as should have been picked up from the preset - produced a perfect print. Perfect that is compared to one printed prior to download 10.6.8.
    The odd thing about this - and the one that left us clueless - was that before deleting and re-installing the printer - the Print Settings dropdown reflected all of the criteria of the preset. Everything looked normal, except that is for the hair being pulled out by those wasting time, paper and ink after a solution.

  • Problems after the last Apple Security Update with trackpad/mouse tapping/clicking

    Dear All,
    I do have a MacBook Pro 15 (early 2008), Mac OS X (10.6.8). The logic board was replaced a couple of years ago under Apple warranty (distorted video problem). I am planning to repalce it after the next apple update on the macbook pro line. Before someone asks, I am using Snow Leopard because I still have some programs that needs Rosetta. I did apply the last security update and after I did shutdown and restarted the computer last night, the trackpad/mouse (mighty mouse, usb mouse) is not working properly. I just cannot do the left click or tap on the trackpad. The mighty mouse works perfectly, except the clicking. The same for the trackpad (tapping). I manage to open a pdf file with some keyboard shortcuts. I can use the mouse/trackpad to scroll and zoom in/out the document. I can use the trackpad to rotate the document, etc. Pressing on the might Just can´t tap/clock on the document to select or open it.
    I alread did the obvious thing: command-alt PR, start in safe mode, unplug the power/battery for a few minutes...
    Did you have a similar problem with the last security update. Do you have any suggestions.
    Thanks,
    Carlos

    I have resolved the issue! As I mentioned, I am using a Logitech cordless optical mouse. I connected up my Apple keyboard & mouse and disconnected the Logitech. The problem no longer occurred with the Apple mouse.
    I removed the batteries from the Logitech mouse and disconnected the USB receiver. Restarted the computer, reconnected the Logitech setup, disconnected the Apple stuff, and now it is working.

  • Problems after installation 16.0.3 update for Windows

    I propose here to report problems appeared after installation 16.0.3 Illustrator update for Windows.
    As for me:
    Don’t display Stray and Center Points in Outline mode;
    Eyedropper+Shift works incorrectly;
    Graphic Style Libraries -> Additive make disappeared Fill.

    Hi K,
    Thank you for you reply and sorry if the information was a bit too truncated. well here goes.
    I am using a MacBook Pro (3.1) 17 inch, 2.4GHz processor, 2 GB ram. I edit video using Final Cut Studio 2. i am having a problem with Final Cut Pro 6 after downloading the latest update (6.0.3). Before I downloaded the update I used to be able to export my movies on the Quicktime option of FCP (not compressor or Quicktime conversion) giving me the option to view the the movie while in an FCP Project. The viewer used to scale the exported video to 16.9 (720 by 576 anamorphic), it no longer does this, instead playing it in 4.3. I have tried exporting both from the time line and the canvas but the viewer will only preview in 4.3. As I want to see it in 16.9 because that is what the movie was made in, captured and edited in. The original settings have not changed but there seems to be this annoying problem.
    I hope that is enough detail
    Ivan

  • IMail problem after latest OS Yosemite Recovery update (@09.04.2015), OS X update, itunes update

    Hi,
    I have a problem. After the latest update of OS X Yosemite, Yosemite Recovery update and iTunes I have a big problem. I mail is not lunching, it says that it is identifying message conversations and it will take few minutes... But it has been all day. The situation does not change even after restarting the system. Forcing to quit and reopening the iMail does not help also.
    What is the solution?
    Have anyone had something similar?
    Any ideas?!
    Thank you in advance, looking forward for some advice.

    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks   also Yosemite
    Safe Mode - About

  • Problems after recent june 2012 software updates

    This first time problem has persisted since the most recent Apple updates.  
    I have a 24" Mac w/Lion 10.7.4
    Whether I use Safari, Camino, Firefox or Opera eventually I get a "server can't be found" message when attempting to open a site ( including Apple, blogs,newspapers, etc).  This error isn't consistant ... not always the same site won't open ... sometimes I'll get the 'can't be found message', then after opening other sites and returning to the can't open site ... it opens.
    Also, mail, especially those from businesses, will open but any pics, drawings, etc. aren't there, just a small box with a question mark.  Again, this is erratic problem and doesn’t happen every time I open mail.
    I visited an Apple Genius and she said it was a network issue, then removed a folder named, "CaptiveNetworkSupport" and 9 files ... including a preference.plist, com.apple.Boot.plist, NetworkInterfaces.plist, etc.
    The Genius said the problem was fixed ... but returning home, I reconnected everything and the original problem is still exists.

    bill148 wrote:
    Thanks for the quick response.
    Checking on Configure iPv6, there are three choices:
    Automatically
    Manually
    Link-local only
    I don't see an "off".
    Those are the choices for your Router (Airport Base Station?). RRFS was referring to your Mac's OS X System Preferences->Network

  • Wireless Printer Problems after OSX 10.9.1 Update

    Hi,
    I've been having trouble detecting my HP C309g printer wirelessly following upgrade to Mavericks.
    I can get it working with some effort but after some time it cant be reached again.
    Not sure if the issue is linked to powersave on the printer of anything like that but i've had the same printer for a few years and never had such issues.
    I've tried resetting the printing system and reinstalling the drivers etc, but not really solving the problem.
    After trying a few of those steps this morning, i now dont see the printer in the list of available wireless printers, but i did have that before also so its not a direct result of those steps.
    Any tips on debugging would be appreciated. I've seen a few other threads with similar issues. Not clear if the issue is airport updates or OSX updates etc.
    thanks

    If there is some method to determine what IP address the HP is using, then you can often enter this IP address as a URL in a web browser. When the printer is connected to the same network as the computer this action should result in the internal web page of the printer appearing (assuming the printer has this facility which many do).
    Or you could use the built-in Network Utility, which used to be located under Applications > Utilities but has been moved in Mavericks - now you must open System Information and select Windows > Network Utility. With this open there is a Ping tab. Here you can enter the IP address of the printer and press Ping. If there is a working path between the Mac and the printer then you should get a response to each Ping packet that is sent.

  • Problems after wireless router (WRT310n) firmware update.

    I updated the firmware on my wireless router (wrt310n) yesterday and now I am having major issues connecting my laptop to it via wireless.  After the update, I reset the router as well as unplugged the power source.  Once the update and everything was reset, I re-entered all my settings and set the computers back up using the LELA.  I go to change the laptop to wireless and it says it can't connect to it.  I did the LELA update on the laptop thinking that would fix it, but it didn't help.  However, the whole time I am able to connect to the router using a ethernet cable.  I turned off all of the encryption settings, firewalls, and broadcasted my SSID.  I searched this forum for some help and one topic suggested somethings, which I did, and I was able to connect wirelessly with the encryption.  I thought I was done and set-up, until later that evening.  I turned the computer back on only to see the same problem again.  I decided to deal with it the next day (today) by uninstalling LELA and just using Windows to configure my wireless settings.  As soon as I uninstalled LELA, entered the key into the Windows program, it worked like a charm.  Until tonight, when I turned on the computer.  Now I'm connecting to the network wirelessly, but it says "Limited or no connectivity."  Acting like there is no encryption key entered.  I go to "View Wireless Networks" and it says "WIndows cannot configure connection.  If you have another program to manage this wireless connection, use that software."  The thing is, I don't have another program on here to manage a wireless connection.  Sorry for the long post.  I figured if I didn't type everything out, people would have just asked me questions.  I had no problems with this router until I did the update yesterday.  If it can't be fixed, is there a way to revert back to the old firmware?  Thanks in advance.

    Well you should adjust the Wireless Settings on your router...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Before you attempt to connect to your wireless network you should first check your Programs menu if there is any Wireless Program(like 'Intel Proset' , 'Dell Wireless WLAN' , or anything that gives you a clue of a Wireless Program/Utility/Software)...You should use the Wireless Utility/Software(if any) to connect to your wireless network and not the Windows default Wireless Program to avoid any conflicts...

Maybe you are looking for