Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

Similar Messages

IS O&G - is it possible to use MPL without activating the ECC- DIMP?

Hi
We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
The question is it possible to use MPL without activating the ECC- DIMP
Request you to please help us to understand.
Regards

Hi Venkat,
If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
Could you please let know why you want to report on the unactive request, is it having some problem with activation?
Regards,
Pankaj

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Just bought an ipad2 but cannot find the face time application after activating the ipad2

Just bought an ipad2 but cannot find the face time application after activating the ipad2

FaceTime is not available in the UAE so it is not on your iPad. It is restricted there.

HT204088 I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my

I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my money ???

Apple - Support - iOS Apps - Contact Support

DSO activation problem after creating the secondary indexes

Hi,
I am facing the problem with DSO activation after creating the secondary indexes.
Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
As a workaround I can write a simple report which drops and creates the indexes on database level.
By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
Thanks in advance for your help.
Thanks & Regards,
Bala

hi,
in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
no need to create the indexes or delete it.
if the dso is not used for report then no need to use indexes.
Ramesh

Problems with viewing contacts after activating the cellular data entry

Hello I have a problem, I activated my iPhone 4S voice data phone to send a mms anddoes not make me see the book as some one can help me? Thanks to all

yes iam experiencing same problem,it is very frustrating,nokia must solve it,anyway i found a way to overcome it that is we normally type sms first then select contacts whom to send,do it in reverse manner first select contacts from contact list mark them and from options menu select create message to send sms to all marked contacts,problem of dissappearing some contacts will be overcome

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem After writing the Jfree chart into pdf

Hi All,
I am writing the Jfreechart object with my company logo into JSP and and setting the content type as "application/pdf". I am getting the error as
java.lang.IllegalStateException: getOutputStream() has already been called for this response.
I have searched for it in the google as well as sun forums for so many hours and i implements so many suggested solutions but i am unable to remove the exception.
The problem might be using response.getOutputStream() to get the output stream to in the response.
But while debugging the code I observed that I am getting the error after complete execution of the code ie. after displaying the pdf.
I am using JSF with JBoss portlets.
Could any one help me in solving this problem as soon as possible..
Thanks in advance.

I am using the fallowing code to write into response. After execution of all the code and after displaying pdf its throughing the exception
*OutputStream outStream = response.getOutputStream()*
//To get the logo path from propeties file
ResourceBundle resourceBundle = ResourceBundle.getBundle("imagepath");
                  String imagePath = resourceBundle.getString("imagepath");
                  Image image2 = Image.getInstance(imagePath);
                    image2.scaleToFit(100, 100);
                    PdfPTable pdfPTable = new PdfPTable(2);
                    pdfPTable.getDefaultCell().setBorder(0);
                    PdfPCell cell = new PdfPCell(image2);
                    cell.setHorizontalAlignment(Element.ALIGN_LEFT);
                    cell.setBorder(0);
                    pdfPTable.addCell(cell);
                    pdfPTable.addCell("");
                  //get the Pdf writer object
               PdfWriter     writer = PdfWriter.getInstance(document, outStream);
                   document.open();
               document.add(pdfPTable);
                  PdfContentByte contentByte = writer.getDirectContent();
                  PdfTemplate template = contentByte.createTemplate(1200, 750);
                  Graphics2D graphics2d = template.createGraphics(600, 750, new DefaultFontMapper());
                  Rectangle2D rectangle2d = new Rectangle2D.Double(0, 0, 540, 700);
                  jfreechart.draw(graphics2d, rectangle2d);
                  graphics2d.dispose();
                  contentByte.addTemplate(template, 50, 25);
                  //setOldchartObject(chartInfoBean);
                  System.out.println("This is before closing th edocument.");
                  document.close();

Problem after installing the flash player

Hello
after installing the flash player i can't run some videos from different sites like facebook,
how can i fix it ?
Thank you

After the problem, I have quickly installed the latest graphic driver - but allways the same problem.
Before I have installed the flash player - the power settings - windows energy settings was "Turn off the display after ten minutes." It has always worked correctly.
After I have installed the flash player - the display was gone off - but never go on - I must restart my computer.
Now I must choose "Do never turn off the display". This problem I have since 2010. Until now I did not know why. Now I have reinstalled my computer and every day another programm installed. To see what it is.
This is my PC http://www8.hp.com/de/de/hp-search/search-results.html?ajaxpage=1#/page=1&/cc=de&/lang=de& /qt=WX139EA
(I have installed 6GB RAM)

Printer problem after upgrading the Mac HD disk

After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Music player problem after updating the latest ver...

After updating the latest version for my phone, everything seems perfect. But today i see there is a serious problem of the music player. I still can play the music but i cannot change to another song or exit the player because whenever i do that, it is frozen (only music player).
Does everyone have the same problem and knows how to make it work smoothly again? Thanks
Message Edited by beingkiller on 17-Jan-2010 04:14 AM

HI even my phone has stopped responding. I had a backup file in .nbu format created using the PC suite. I restored the phone using the backup file but it didnot help me. I cannot play even 3 songs consecutively, the player is getting hang and I am forced to restart. Please do not update your firmware. All the problems after I updated my firmware to 40.0.005 version. I am planning to take my phone to nokia care and reset the whole software once again so that it comes with the factory settings.

Ran into a problem by activating the SharePoint Server Publishing feature

By activating the "SharePoint Server Publishing feature" at site level the complete look and feel of the site has been changed to a default page layout , all the customization's were removed.
Changes were not rolled back even after deactivating the feature.
any help on how to get back my look and feel is appreciated.
Thanks in advance.
Regards
Bhaskar

Hi,
How did you customize the site initially? Was that in SharePoint designer? And if so what part of it did you exactly customize? The page itself or the masterpage?
Regards,
Casper

Location Services on iPhone Problem after Active it !

After Active My new iPhone 5 , Location Services on iPhone is ON, But Maps and other applications can not use it ! on maps show massage " Cannot Determine Location ". Please Help !

Problem solved and this may help others:
After updating to iOS 7 for some reason my settings were changed in restrictions. My solution was to got to General>Restrictions>Location Services and set to Allow Changes. It then allowed me to turn services on.

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Problem after activating the ECC 6.0 DIMP

Similar Messages

Maybe you are looking for