Problem after regestering a form on ebs

db , dev 10g rel2 , vison 12 ,
hi all ,
i am trying to build a form and regestering it on ebs ,
i am sure i made all steps correctly ,
i opened the template , removed unwanted objects "block_name,%detail%" i do not remember the second name of the block , modified triggers "pre-form,when-new-form" , modified app_custom package , created my block on a new canvas with a new windows , inherited every new object i created , did everything , and the form is compiled and registered well , but when i try to press f11 to enter-query , the fields color does not change to blue , it is white , second thing , f4 does not close the form or cancel the query ,
and i can not insert anything into the table .
i've tried it once with per_all_people_f table , and another once with table i created ?
how could i solve it ?
thanks in advance

please see this .
problem after regestering form on ebs
whenever i ask there in ebs general discussion , they say i can ask here , and if i post here you say i should ask there , what should i do ?

Similar Messages

A problem after runing a form in reader extension

Dear All,
I need your help in this following problem ,After runing a form designed by Adobe LiveCycle Designer 8.2 in Adobe LiveCycle Reader Extension it doesnt work ,as when I open the form it gives me this messsage "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer availabe. Please contact the aurthor for the original version of this document." And all content of the form were blocked .
Any Helpful Answes??
Regards,
Osama

Dear All,
I need your help in this following problem ,After runing a form designed by Adobe LiveCycle Designer 8.2 in Adobe LiveCycle Reader Extension it doesnt work ,as when I open the form it gives me this messsage "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer availabe. Please contact the aurthor for the original version of this document." And all content of the form were blocked .
Any Helpful Answes??
Regards,
Osama

Problem after regestering form on ebs

db , dev 10g rel2 , vison 12 ,
hi all ,
i am trying to build a form and regestering it on ebs ,
i am sure i made all steps correctly ,
i opened the template , removed unwanted objects "block_name,%detail%" i do not remember the second name of the block , modified triggers "pre-form,when-new-form" , modified app_custom package , created my block on a new canvas with a new windows , inherited every new object i created , did everything , and the form is compiled and registered well , but when i try to press f11 to enter-query , the fields color does not change to blue , it is white , second thing , f4 does not close the form or cancel the query ,
and i can not insert anything into the table .
i've tried it once with per_all_people_f table , and another once with table i created ?
how could i solve it ?
thanks in advance

semsem wrote:
db , dev 10g rel2 , vison 12 ,
hi all ,
i am trying to build a form and regestering it on ebs ,
i am sure i made all steps correctly ,
i opened the template , removed unwanted objects "block_name,%detail%" i do not remember the second name of the block , modified triggers "pre-form,when-new-form" , modified app_custom package , created my block on a new canvas with a new windows , inherited every new object i created , did everything , and the form is compiled and registered well , but when i try to press f11 to enter-query , the fields color does not change to blue , it is white , second thing , f4 does not close the form or cancel the query ,
and i can not insert anything into the table .
i've tried it once with per_all_people_f table , and another once with table i created ?
how could i solve it ?
thanks in advanceDid you use the TEMPLATE.fmb file to create this custom form?
Thanks,
Hussein

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

Urgent: Problem opening a data form that uses a smart list

Hi, we've got a problem with a data form that is quite unusual.
The data form was working perfectly until yesterday when we put a smart list in it. The smart list is composed of 8 possible choices activated by the following member formula:
IF (SML==1)
((BDG->BegBalance->&CurrYear)/12);
ELSEIF (SML==2)
((INC_BDG->BegBalance)*("01A2"->ACT_FINAL));
ELSEIF (SML==3)
ACT_FINAL->&PreYear;
ELSEIF (SML==4)
(INC_ACT->&PreYear)*("01A2"->ACT_FINAL);
ELSEIF (SML==5)
ACT_FINAL;
ELSEIF (SML==7)
(INP_PER)*("01A2"->ACT_FINAL);
ELSEIF (SML==8)
INP_ASS;
endif;
Initially we tested the functioning of every different choice in the smart list and it was working properly. After a while we tried again to change the choices combination and we couldn't open the data form due to an error.
It is quite strange because sometimes it work and sometimes it doesn't. In the data form (that is very large) there are many accounts and scenarios that are dynamic calc, in addition to the smart list formula; we tried to open the form two minutes ago converting the data storage type of a scenario from "Dynamic calc" into "Dynamic calc and Store", and it seems to work at the moment... does planning have a memory limit? Can someone suggest a solution (or help us find out the reason)?
Bye

Anton,
new thread is one possibility, but the messsage box is not win message box, but SAP form, so I think you can clcik there without new thread too.
Check this thread, hope it helps
Re: Confirmation Dialog in my way

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

How to Deploy 11g Forms and EBS Applications?

Dear All,
Just need to know some technical information regarding EBS.
Previously I have worked with Oracle forms and reports 6i and we used to deploy the application developed in this tool to publish using Application Server 9i/10g. I also have hands on experience on that.
Now after 4 years I am again trying to do some hands-on on later versions.
Just want to know that for Developer Suite 10g, If i developer the application it will be published using Application Server 10g? so that the user can access this application?
How EBS application is host and published?
Will really appreciate your kind help.
Thanks, Imran

How to Deploy 11g Forms and EBS Applications? Forms 11g is not certified with EBS 11i/R12
Just need to know some technical information regarding EBS.
Previously I have worked with Oracle forms and reports 6i and we used to deploy the application developed in this tool to publish using Application Server 9i/10g. I also have hands on experience on that.
Now after 4 years I am again trying to do some hands-on on later versions.
Just want to know that for Developer Suite 10g, If i developer the application it will be published using Application Server 10g? so that the user can access this application?
How EBS application is host and published?
Will really appreciate your kind help.Oracle Developer 10g comes as part of Oracle EBS installation, so no Oracle AS installation is required. You need need to install Developer 10g on your client to build forms/reports.
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
How To Bring Up 10G Forms Builder In R12 Environment? [ID 579318.1]
Thanks,
Hussein

A font package is requried to correctly display after creating interactive form in livecycle

SO I created a form in acrobat. When I save it, and open it in reader, it opens it fine. But I need to make the fields expandable, so I go to livecycle, and create an interactive form with flowable layout. Once i save it, and open it in reader, it instructs me to download chinese font package. There are no chinese fonts in this document. And I only get this message after saving the form in LiveCycle. Any ideas? It just started happening last week. Never had a problem before that.

Hey buddy, I experienced similar problem.
When you creating the form, make sure the font you are selecting is a popular font. For example, if you change it to New Time Roman instead of SimSun, it will work.
Try it!

Adobe Form is not opening after saved the form locally

Hi Experts,
I have implemented the adobe form using webdynpro java using ACF. The scenario is initially the form is loading with input fieIds and dropdown boxes after that the form data has to be submitted into backend.
I have encountered the problem that if i save the submitted form into locally and trying to open the form its not opening.
The server and other details are:
NetWeaver - 7.00(2004s) SPS3
Adobe reader - 9.0
ADS vesion - 7.01
Please let me know if you have any idea.
Thanks!
Narasimha

1). If i will convert the forms from ACF to ZCI capability. Suppose if I want to fall back from ZCI to ACF forms then what is the solution for that?
Well you won't need to go back to ACF as such but if you want to then may be you can keep take backup of all forms.
2).After conversion of the forms to ZCI capability then what are the necessary steps i need to follow like abode form ui elements can be changed to webdynpro native ui elements type like that.
The Report generally mentions all the items in yellow/red for things to work on but yes if you have used ACF Controls you just need to update it by Native controls. From Web Dynpro form properties change the displayType property to native as well.

Problem moving Oracle 9i forms to production.

Hello,
We are having problems while moving oracle 9i forms to production on our 9ias server if anybody is using the same form. Is this because 9ias might be caching it.
How is the normal application deployment done in oracle 9ias ?
Our exact problem is, if the form is already in production and if a user has opened it and another programmer wants to transfer the same form into production after some changes, we cannot do it. We need to wait till all the users are out of the form to view the new version. Are we doing something wrong ?
Please help.
Thanks.

This is normal behaviour on Windows. When a user opens a file, the file is locked for rename, delete etc. Try deleting a Word document when somebody is using it. It is just not possible.
Usual solution: patches are put in production in the middle of the night.
If really urgent, the Windows administrator can check who is locking the file and unlock it.

Problem after run report with spreadsheet

hi evry one
ther an a problem after run report with spreadsheet .
after runing iexplorar open and close fast no thing else
when i check the job from appserver job success with spreadsheet dis format.
what shall i do.
thanks.

Hello,
Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
If yes , take a look to : "IE7 windows opened and closed immediatly"
http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the solution suggested :
We have found the setting that we needed, under the Internet Options
Security tab, if you select the internet zone, and click the custom level
button, then scroll down to the Downloads section, the first option is
Automatic prompting for file downloads, setting this to enable keeps IE 7
from interfering with this sort of download.
Regards
Example with screen shots :
http://www.celt.iastate.edu/webct/securitysettings.html
Regards

Problem about using Oracle Form 6i to connect Oracle Database 10g express.

Sorry to interrupt all of you.
I have encountered a problem about using Oracle Form 6i to connect Oracle Database 10g express.
As I would like to
I use Oracle Net8 Easy Config to create a connection.
According to "tnsnames.ora", the paramater of connection is as follows;
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA = (SID = XE))
Unfortunately, when I use Oracle Net8 Easy Config to test the connection, an error message is prompted as follows:
Connecting....
The test did not succeed.
ORA-03106: fatal two-task communication protocol error
There may be an error in the fields entered
or the server may not be ready for a connection.
You can check the server and retry, or continue.
After I google it, I still have no idea how to solve the problem. I would like to ask, could anyone mind providing some hints or solution to address the issues.
Thanks for your assistance in advance.

I don't believe the Net8 Easy Config (NEC) will create a compatible entry in the tnsnames.ora. I have Forms 6i running successfully against a 10g Express database, but I did not use the NEC - I created the entry myself. Here is the entry I use:
XE=
(DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=<<servername or IP address>>)
      (PORT=1521)
    (CONNECT_DATA=
      (SERVER=dedicated)
      (SERVICE_NAME=XE)
)Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Problem in running the form

I have installed Oracle 9i database and developer suite on my dual-core 1 mb ram , window XP3 , configration PC.
There is no database connectivity problem and everything is working fine.But after developing the form in form builder
then start OC4J..
when i start oc4j instance it give me this message on dos
C:\Documents and Settings\Tanya\desktop>E:\oracle\oradata\myoracle\jdk\bin\java -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=c
om.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=E:\oracle\oradata\myoracle\j2ee
\Oracle9iDS\config\jazn.xml -Doracle.home=E:\oracle\oradata -DORACLE_HOME=E:\oracle\oradata\myoracle -jar E:\oracle\oradata\myoracle\j2ee\home\oc4j.jar -userThreads -config E:
\oracle\oradata\myoracle\j2ee\Oracle9iDS\config\server.xml
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
FormsServlet init():
configFileName: E:\oracle\oradata\myoracle/forms90/server/formsweb.cfg
testMode: false
ListenerServlet init()
After that when i am going to run the form in the internet explorer it is flashing that "The page cannot be displayed" .And in the address bar the following address is displayed..
http://%%20"http://compu:8888/forms90/f90servlet?form=C:\MODULE1.fmx&userid=HR/HR@myoracle&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES"
I am saving the file in the in the c drive directly and there is no space in the path.
When i am removing http://%%20" from the begining of the address and the last --> ", mark then my form is running perfectly.
Please help from where to set the path so that my forms runs smoothly.
Thanks
Tanya

Hello tanya,
Open the builder ->Edit preferences ->Runtime->Click on Reset to Default ->Click Ok.
Rajesh Alex

Problem after regestering a form on ebs

Similar Messages

Maybe you are looking for