PROBLEM: ALE SCENARIO (PURCHASE/SALE)

i need to create a sales order at clent"xyz" automatically as soon a purchase order at client "abc" is generated.
For DOING this,iN MESSAGE CONTROL i am using
medium:ALE
application:EF
output type:NEU
outbound process code: me10
messagetype:orders
and while defining inbound parameters for client "xyz"
Process code: orde
-process immidiately
nOW Purchase order is generated,And idoc for the same is also created which is sent to the port for transmission at specified RFC destination.
message status = 3 (sent to port)
But it is unable to create the application document,
reason: VKORG, VTWEG, SPART cannot be determined for customer 0000003000 , vendor 0000003000
it needs these fields for automatic generation of sales order.
Now i am able to find these fields,they exist as data elemnt in SAP.
How can i add these fields to my message(idoc type).As i am using "Orders",which is SAP object,which i cannot edit.
What could be the probable solution?Pls. suggested, if i am missing in between at some point....
Thanks and Regards:
Vijay Raheja
09868633169

Hi, Vijay Raheja
Aveek Ghose's solution is right, you can solve this problem by create a extension IDOC type.
List the mainly step as following:
Create The Extension Segment we31
Create the Extension IDoc Type we30
Create the new Message Type we81
Do some change on the IDOC configuration:
If you want to create a FM to handle your new extension IDOC, you also need to create a new process code link it, and assign it to your IDOC type.
But normally, we don't create new handle FM for extension IDOC, adding an enhancement in the current IDOC handle FM is enough.
How to do this step according to your requirement.
Hope it will be helpful.
Thanks a lot

Similar Messages

Purchases / sales register report

Hi,
I have two problem in a purchases / sales register report.
1) In the report of the purchases / sales register, SAP show me both purchases and sales also when I select only one or the other. How I show only one or the other in a report?
2) There is a way to show at the end of report the totals divided by IVA codes?
Best regards.

Hi,
This is SAP business one forum. Please find correct forum and repost your discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Good receipt problem for subcontracting purchase order

Good receipt problem for subcontracting purchase order
with account assignment type E.
After update to ECC 6.0. Do good receipt for subcontracting purchase order with account assigment 'E'.The system show the error message(KI235)----Two cost elements (Change in Stock (Subcontracting)&Outside processed fee) haven't CO account assignment.but the field status for sale order is option entry , when I default cost center for the cost element in OKB9.the system post the material document and generate the following accounting document.
Doc.Type : WE ( Goods receipt ) Normal document
Doc. Number    5000056065       Company code    1000         Fiscal year     2007
Doc. date      2007.12.04       Posting date    2007.12.04   Period          12
Calculate Tax
Doc.currency   HKD
tm PK Account    Account short text   Tx Cost Ctr   SaleOrder               Amount
1 89 13500000   Stock-Work in proces                   1007823 10             274.4
2 96 21210010   GR/IR Clearing                             1007823 10             205
3 91 41010102   Chg in Stock(Subcon)    10901099 1007823 10            274.4
4 86 41031000   Outside processed fe     10901099 1007823 10            205
5 99 13500000   Stock-Work in proces                    1007823 10            69.4
6 81 41010101   Cost of Prod (Subco)                      1007823 10           69.40
My problem is:
When use MIGO to do good receipt for subcontracting Purchase order, for consumption account((Change in Stock (Subcontracting)-41010102&Outside processed fee--41031000) ,why the system dont recognize the sale order filled as CO account assignment?

Dear fanny chen
Did you get a solution for your open question?
I`m facing the same problem, so any help yould be appreciated.
Regards

3rd Part Dropship Scenario with Sales BOM

Hi
We have a 3rd Party Dropshipment scenario with Sales BOM with susequent Debit
Characteristics of Sales BOM
Sales BOM is created
Header Material is Valuated but non-inventorised (Accounting and costing view should exist)
Component Material is Valuated and inventorised
In Sales order, Pricing is done at the header material not at the components level
During Billing we get the COGS for the header material (cost coming from VPRS)
No VPRS exist at component level instead we have copy of VPRS just to capture the value in COPA for our reporting
Process
1. Sales Order created with Sales BOM exploded in sales order.
2. At the Item level Purchase requisition is created.
3. PR for the components is converted to PO
4. Vendor Delivers the components to Customer.
5. Statistical GR done in our system.
6. Invoicing is done in MIRO
7. We directly do the Billing. Billing is created at header level. Revenue and COGS is reported at Header level only.
We are stuck when we are doing the Subsequent Debit (can be for any unplanned cost). For Susequent Debit we are not able to report differential COPA at header level.
Normally whenever you do subsequent debit in case of 3rd party dropship for normal material, COPA document automatically attached to Billing. This is happening because of the behaviour of VPRS condition type. In our case VPRS only exists at header level and not at component level but replenishment is for components. Subsequent debit is also happening at component level. We need it to be reported at header level.
We need some solution to this.
Please advise
Regards
Neeraj
Edited by: NEERAJ BHARDWAJ on Dec 2, 2011 5:12 AM

Hi Raj,
Please clarified your requirement here, you mention that you wanted to valuated COGS at actual cost of PO? That sound more like actual costing here and what is the reason for this requirement?
Is this MTO with variant configuration?
If this is MTO with VC, Yes - we do cost Sales Order and here is the brief steps:-
Price Control S
a) Sales Order Creation - Normally when you save this will be costed and marked automatically. Note that condition type EK02 will represent the cost here
b) Run MRP based on Sales Order requirement which resulting planned orders, PR, etc
c) Convert PR-PO, Planned Order -> Production Order
d) Confirmations, GR on PO which valuated according to the SCE Costing in step a)
e) PGI will be based on the GR value on step d) which is also your SCE Costing
f) Any variance between PO and SCE need to be settle.
Thanks,
Ong Yang Lim

User Exit for calculation of inclusive tax scenario in Sales ordercreation

Hi All,
What is the User Exit for calculation of inclusive tax scenario in Sales order creation for pricing procedure.
Regards,
Tulasi

Hi Tulasi
Please check this thread , if your problem is solved with the help of this thread then there is no need to go with the user exit.Just go with the changes in the condition types.
Tax inclusive in base price
Regards
Srinath

ALEAUD to sending system in ALE scenario using XI

Hi,
I have a quite simple ALE scenario with following components;
SAP IS/OIL -> (CREMAS) -> XI -> (CREMAS) -> SAP Retail
I have read both how-to-guides; IDOC-XI scenarios and handle ack. for IDOCs.
By activating the runtime paramter ACK_SYSTEM_FAILURE, XI will send ALEAUD in case of error on XI - this works in a way.
By using program RBDSTATE on SAP Retail - this works in a way.
Challenge 1:
In case of error on XI, the ALEAUD message sent back to IS/OIL doesn't contain neither message type or the referenced IDOC from IS/OIL;
E1ADHDR-MESTYP
E1ADHDR-MESTYP_LNG
E1STATE-DOCNUM
is missing.
Anyone with ideas?
Challenge 2:
The ALEAUD from SAP Retail (using RBDSTATE) is not referring to the right IDOC from the sending system, seems to me that Retail is using it's own number range.
Anyone with ideas?
best regards
Torstein

Hi,
Even I have the same problem.
I have configured ALEAUD in Integration server. When there is an error ( sa incorect RFC Destination of Receiver), an ALEAUD message type iDoc is sent back to the sender SAP System. But i noticed that the iDoc has only data in the segment E1STATE ( with data status, statxtstamid). But the segments E1AHDHR and E1PRTOB are empty.
The acknowledgement idoc doesnt contain any reference to the message( like the message ID) which has gone for an error. It just contains error text.
Could you please let me know how you solved it
Thanks & Regards,
Vani

Urgent :Getting error "No ALE scenario active in Profit Center Accounting"

Hi Experts
I am working on a LSWM project ,which uses BAPI BAPI_PROFITCENTER_CREATE for upload of data,but I am facing a strange problem during the IDOC posting the error "No ALE scenario active in Profit Center Accounting" is shown and the status of IDOC goes to 51.
I have done all the ALE setting required for LSMW like File port ,partner type and partner number.
Please help me to solve this error.
Thanks
-Mitesh
Message was edited by:
 Mitesh Parekh

Hi,
Refer This SDN Blog, which gives you steps in detail....
LSMW Step by Step Guide: Legacy System Migration Workbench is an R/3 Based tool for data transfer from legacy to R/3 for one time or periodic transfer.
Basic technique is Import data from Spreadsheet / Sequential file, convert from source format to target format and import into R/3 database. LSMW not part of standard R/3, if we need this product email [email protected]
Advantages of LSMW:
 Most of the functions are within R/3, hence platform independence.
 Quality and data consistency due to standard import techniques.
 Data mapping and conversion rules are reusable across projects.
 A variety of technical possibilities of data conversion.
 Generation of the conversion program on the basis of defined rules
 Interface for data in spreadsheet format.
 Creation of data migration objects on the basis of recorded transactions.
 Charge-free for SAP customers and partners.
Working With LSMW:
Use TCODE LSMW
Objects of LSMW:
Project ID with max of 10 char to Name the data transfer project.
Subproject Used as further structuring attribute.
Object ID with max of 10 Characters, to name the Business object .
Project can have multiple sub projects and subprojects can have multiple objects.
Project documentation displays any documentation maintained for individual pop ups and processing steps
User Guide: Clicking on Enter leads to interactive user guide which displays the Project name, sub project name and object to be created.
Object type and import techniques:
Standard Batch / Direct input.
Batch Input Recording
 o If no standard programs available
 o To reduce number of target fields.
 o Only for fixed screen sequence.
 BAPI
 IDOC
 o Settings and preparations needed for each project
Preparations for IDOC inbound processing:
 Choose settings -> IDOC inbound processing in LSMW
 Set up File port for file transfer, create port using WE21.
 Additionally set up RFC port for submitting data packages directly to function module IDoc_Inbound_Asynchronous, without creating a file during data conversion.
 Setup partner type (SAP recommended US) using WE44.
 Maintain partner number using WE20.
 Activate IDOC inbound processing.
 Verify workflow customizing.
Steps in creating LSMW Project:
 Maintain attributes choose the import method.
 Maintain source structure/s with or without hierarchical relations. (Header, Detail)
 Maintain source fields for the source structures. Possible field types C,N,X, date, amount and packed filed with decimal places.
 Fields can be maintained individually or in table form or copy from other sources using upload from a text file
 Maintain relationship between source and target structures.
 Maintain Field mapping and conversion rules
 For each Target field the following information is displayed:
 o Field description
 o Assigned source fields (if any)
 o Rule type (fixed value, translation etc.)
 o Coding.
 o Some fields are preset by the system & are marked with Default setting.
 Maintain Fixed values, translations, user defined routines Here reusable rules can be processed like assigning fixed values, translation definition etc.
 Specify Files
 o Legacy data location on PC / application server
 o File for read data ( extension .lsm.read)
 o File for converted data (extension .lsm.conv)
 Assign Files to defined source structures
 Read data Can process all the data or part of data by specifying from / to transaction numbers.
 Display read data To verify the input data being read
 Convert Data Data conversion happens here, if data conversion program is not up to date, it gets regenerated automatically.
 Display converted data To verify the converted data
Import Data Based on the object type selected
 Standard Batch input or Recording
 o Generate Batch input session
 o Run Batch input session
 Standard Direct input session
 o Direct input program or direct input transaction is called
BAPI / IDOC Technique:
 IDOC creation
 o Information packages from the converted data are stored on R/3 Database.
 o system assigns a number to every IDOC.
 o The file of converted data is deleted.
 IDOC processing
 o IDOCS created are posted to the corresponding application program.
 o Application program checks data and posts in the application database.
Finally Transport LSMW Projects:
 R/3 Transport system
 o Extras ->Create change request
 o Change request can be exported/imported using CTS
 Export Project
 o Select / Deselect part / entire project & export to another R/3 system
 Import Project
 o Exported mapping / rules can be imported through PC file
 o Existing Project data gets overwritten
 o Prevent overwriting by using
 Import under different name
 Presetting for Inbound IDOC processing not transportable.
One Last thing, Check in BD64 is the Distribution model is Active for Profit Center.
Cheers...
Santosh.D
Mark All the Usefull Answers.

ALE Scenario

Below is the i/b idoc scenario:
Sender of Idoc sys1
Receiver of Idoc sys2
I have maintained base logical system in sys2 as 'LS1' and assigned it to client 201.
Now, when i define a logical system for sys1(sender) in sys2(receiver), do I have to assign it to any client?
thanks,

Hi
You have to assign it to client
check this following procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Please check this site regarding ALE.
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
Reward all helpfull answers
Regards
Pavan

Problem creating Material Master sales view with LSMW

Hello experts,
I have created a LSMW that uses the direct input program RMDATIND to create new material master records. These materials have different material types.
I require fields from different views like Purchasing, Sales, MRP and accounting, among others. But not all the material types have all the view defined. I will like, if it's possible, use the same LSMW program to upload all the materials.
The problem that I'm having if once I ran the program, I got the warning message "The data for the maintenance statuses V cannot be transferred", message no. MG161, and even the material is created the sales view is it not. I check all the sales data in my CSV file and looks good.
I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
As an extra information, I'm using the following structures BMM00, BMMH1, BMMH2, BMMH5 and BMMH7.
Hope you can help me to solve this issue.
Regards,
Mairo.

>
> I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
Each material type has its own set of views, e.g. a FERT has sales views but no pruchasing view, a ROH has purchasing view but no sales view, a NLAG has no storage views and a UNBW no accounting views.
This is defined in customizing of attributs of a material type.
Because of this you have to make sure that you do not transfer sales data for a material type that does not have sales views.
Which views you actually want to create is defined in field PSTAT. Each character stands for a certain view (defined in table T132)
re:The data for the maintenance statuses BG cannot be transferred
Are your matrials split valuated?
if you want create accoutning data in MBEW table with MBEW-PSTAT having BG status, then you have to make sure that MARA and MARC PSTAT field also has the B and G .

My app store wont let me download apps, says the card is expired and theres a problem with previous purchase can someone help me pls?

My app store wont let me download apps, asks me to update my payment details then says theres a problem with previous purchase and card is expired which is untrue someone help me pls

This is a User to User Forum...
See Here for
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html

Download or upgrade current and free apps says there's a billing problem with previous purchase previous purchase what can I do to fix it

Every time I try to download a free app or even upgrade any of my apps for free it tells me to put my Apple ID I do that then it say there a billing problem with previous purchases. So I click continue and put in my debit card information correctly but still won't work it always declines it and says he's different payment method. what can I do it's been like that for 3 months that's the only card I have.

Hi ..
I replied to you here > Download or upgrade current and free apps says there's a billing problem with previous purchase previous purchase what can I do to fix it

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

PURCHASE & SALE SUMMARY REPORT

hi....
i want T-codes for getting PURCHASE & SALE SUMMARY REPORT ALONG WITH VENDOR & CUSTOMER WISE ALSO.
Thanks & Regards
Rekha Sharma

hi...
by these t.code i not found any result pls do needful.
i want vendorwise/customerswise purchase/sale summry. It should show Purchase/Sale Qty. & amount.
Thanks & Regards
Rekha sharma

Re scenarios of sales order

How many scenarios are there
like a sales order is created     - sales order field changes
like   a sales order is edited       - sales order field changes
if    a sales ored is cancelled - sales order field changes
any more scenarios how sales order field is effect ?
and could u pls let me know are there any field that tracks the change order whenver it get s changed created cancelled .

HI
In sap all changes done are stored in a separate tables CDHDR for header details and CDPOS item details.
regards
prashanth

Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry   i was unfotunately put this thread here over in SD

PROBLEM: ALE SCENARIO (PURCHASE/SALE)

Similar Messages

Maybe you are looking for