Problem allocating service packages to users via delegated admin

I've created a custom service package using the sample templates. Upon assigning this newly created package to a user via Delegated Administrator I receive the following message "cannot create user - all service packages of this type have been allocated". Problem is I've made about 200 available and the stats for this package show 0 used. Please advice.
Cheers

Please post this question at Developer Forums > E-Mail, Calendar, & Collaboration

Similar Messages

Deleting users with Delegated Admin

Hope anyone can help with this:
When I delete a user with Delegated Admin (For Messaging 5.x) the user
seems to be deleted in iDA, but it is not deleted in LDAP.
Therefore, I cannot re-use it's attributes (like E-mail address) for
another (new) user.
This causes all kind of problems.
I can go into the Console and through away the user, then everything
works again. But I expected iDA also to delete the user if I use the
delete button.
Any ideas? Did I forget something?
Thanks in advance,
Niels de Troye

Hi..
the nda does not remove the user... is put it in suspend mode...
you have to run the imsimta purge command to remove the user.. or to wait
the server to do that
in a day or so....
take a look at the manual to see how you can do that...
"N. de Troye" wrote:
Hope anyone can help with this:
When I delete a user with Delegated Admin (For Messaging 5.x) the user
seems to be deleted in iDA, but it is not deleted in LDAP.
Therefore, I cannot re-use it's attributes (like E-mail address) for
another (new) user.
This causes all kind of problems.
I can go into the Console and through away the user, then everything
works again. But I expected iDA also to delete the user if I use the
delete button.
Any ideas? Did I forget something?
Thanks in advance,
Niels de Troye--
Over and Out
Giorgos Kiriakidis
Technical Department
NetSmart S.A.
Panepistimiou 58.
Athens 10678
Hellas
Tel +3013302608
Fax +3013302658
Email [email protected]
This message contains confidential information intended for a specific
individual and purpose,
is protective by law. If you are not the intended recipient, you should
delete this message.
Any disclosure, coping, distribution or taking any action based on this
message is strictly prohibited.

Creating users via the admin console

Hi,
I'm trying to create a user via the admin console. The user will have to
authenticate via Membership, and will require a username and password.
However, when creating the user via the admin console it does not allow you
to specify a default password (or by using the command line 'ipsadmin create
user /domain/user.xml', unless there is some XML field specified in the file
to do that? If so, what is it? Specify an attribute in the
"iwtAuthMembership-password"?) After creating a user via the console, I
tried logging in using a blank password and a password the same as the
username, but neither worked. Is this password set as default to something,
and if so to what?
Also, is there some existing means for a user who has already created a
membership account to change their password? If not, then I guess I will
have to develop some code to modify the "iwtAuthMembership-password"
attribute.
Thanks,
Mark

Hi,
After you have created the user via the console, then the user will be added to a particular role.From the console go that particular domain and then to the role under which the user was created.Then select the Users link you can see the users list.From that list select the user for whom a password is needed,then it will lead you to a screen where you can see a link named Authentication.Expand that link and click on the Membership link there you can enter the username and password for the user

Problem deleting users with delegated admin

Hello,
I seem to be having a problem deleting users with delegated administrator. I am using JES 2005Q4.
Here is what I do:
I set Inetuserstatus and mailuserstatus to deleted. Then run msuserpurge to delete the mail box. This seems to be working fine. Then I do a commadmin domain purge and it will actually delete the persons ldap record, but it does not delete the o=pab records or the o=PIserverDB records.
I am probably missing a step here, and would apprecidate it somebody could point me in the right direction.
Thanks,
Gary

DA patches:
119777-10 most current release for Solaris
119778 for X86
119779 for Linux
118540-23 Communication Express Solaris Sparc
118541 X86
118542 Linux
118207-42 Messaging core Solaris sparc
118208 X86
118209 Linux
116574-02 Veritas Vcsha (sparc only)
118242-03 and 118245-03 Dssetup sparc
118243 and 118246 X86
118247 Linux
122018-02 Outlook Connector
(all the currently released patches. Most have t-patches available from tech support post the above numbers)

Cant Create User using Delegated Admin Console

Hi All,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:30:02, Jul 15 2005)
Linux nile.jlcc.com 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 athlon i386 GNU/Linux
I configured DA ..and all the things were working fine including the error im facing now..
for the past two days
I couldnt create user using DA console..but I can able to create from commadmin
the log shows..
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Uncaught exception
     com.iplanet.jato.ApplicationServletBase.onUncaughtException(ApplicationServletBase.java:1415)
     com.sun.comm.da.WizardWinServlet.onUncaughtException(WizardWinServlet.java:98)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1164)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:639)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
     com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
root cause
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:380)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
     com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
     com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
     com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
     com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
root cause
java.lang.NullPointerException
     com.sun.comm.da.view.NewUserSummaryPageViewBean.beginDisplay(NewUserSummaryPageViewBean.java:223)
     com.sun.web.ui.taglib.wizard.CCWizardTag.getWizardPageHTML(CCWizardTag.java:1560)
     com.sun.web.ui.taglib.wizard.CCWizardTag.appendPageletBodyContentHTML(CCWizardTag.java:668)
     com.sun.web.ui.taglib.wizard.CCWizardTag.appendWizardBodyHTML(CCWizardTag.java:658)
     com.sun.web.ui.taglib.wizard.CCWizardTag.getHTMLStringInternal(CCWizardTag.java:469)
     com.sun.web.ui.taglib.common.CCTagBase.doEndTag(CCTagBase.java:114)
     org.apache.jsp.com_005fsun_005fweb_005fui.jsp.wizard.WizardWindow_jsp._jspx_meth_cc_wizard_0(WizardWindow_jsp.java:301)
     org.apache.jsp.com_005fsun_005fweb_005fui.jsp.wizard.WizardWindow_jsp._jspService(WizardWindow_jsp.java:209)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:251)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor131.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     java.security.AccessController.doPrivileged(Native Method)
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
     com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
     com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
     com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
     com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
     com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
Please Help me on this..
Ashik

you may want to post this to the email forum.

Accesing Home folders of other users via an Admin User

Hello all, the macs at where I work are divided into two hardrives a Mac HD and a Media Drive where all video projects are to be save. Some people continue to save to the Mac HD causing the computers to crash. I am trying to look through home folders via Go Home > MAC HD > Users > Username > Movies when i reach the restircted folder.
How can This be changed?

Select the folder you can't access in the Finder and choose Get Info from the File menu. Under Ownership & Permissions, change the owner to yourself and group to admin, set the permissions so that the group has Read & Write access to the folder, and then change the ownership back to its original setting. This should not be done on items outside of account home folders.
(20568)

Service Packages are changing users default calendars

I'm currently testing Communications Suite 5 cal server 6.2 schema 2. I have everything up and running but I'm running into an issue with with assigning service packages to users though.
I created all the users from the command line and I used -k legacy option for the calendar. At this point everything is working fine the user calendars I imported from Cal server 6.0 schema 1 all show up and work like they should. Once I assign a service package to a user account it changes their default calendar to the hosted format. Now my users have two calendars their default (hosted format) which is blank and their imported (legacy format) that has all the calendar entries.
I've changed /opt/SUNWcomm/data/WEB-INF/classes/sun/comm/cli/server/servlet/ resource.properties from switch-caltype=hosted to switch-caltype=legacy and restarted the web container but no luck.
Thanks for any help
Josh

Coolhands_99 wrote:
I created all the users from the command line and I used -k legacy option for the calendar. At this point everything is working fine the user calendars I imported from Cal server 6.0 schema 1 all show up and work like they should. Once I assign a service package to a user account it changes their default calendar to the hosted format. Now my users have two calendars their default (hosted format) which is blank and their imported (legacy format) that has all the calendar entries. It sounds like you missed this step during your move to calendar server 6.2/schema 2:
http://docs.sun.com/app/docs/doc/819-2656/6n4ua512a?a=view
"Configuring Calendar Server for Hosted Domain Support"
I've changed /opt/SUNWcomm/data/WEB-INF/classes/sun/comm/cli/server/servlet/ resource.properties from switch-caltype=hosted to switch-caltype=legacy and restarted the web container but no luck.These settings control how UWC log's into calendar server, i.e. as uid (legacy) or [email protected] (hosted) - it sounds that your problem is related to how calendar server stores to data instead.
Regards,
Shane.

Error when create user via OIM web

Hi Gurus..
I hava some problem when I creating new user via web OIM, error appear while inpute the start date value.
Need help for you guys,
This is the error code.
<Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #5
java.lang.NullPointerException
    at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.handleAccountEndDateValidation(UserManagerValidationUtils.java:237)
    at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.processDateValidations(UserManagerValidationUtils.java:589)
    at oracle.iam.identitytaskflow.utils.UserManagerValidationUtils.processDateValidation(UserManagerValidationUtils.java:543)
    at oracle.iam.identitytaskflow.common.components.UIInputDate$DateValueValueChangeListener.processValueChange(UIInputDate.java:135)
    at javax.faces.event.ValueChangeEvent.processListener(ValueChangeEvent.java:134)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:675)
    at org.apache.myfaces.trinidad.component.UIXEditableValue.broadcast(UIXEditableValue.java:210)
    at org.apache.myfaces.trinidad.component.UIXSelectInput.broadcast(UIXSelectInput.java:216)
    at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:902)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:357)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)

probably yes but I am not so sure about that, I have checked the User.xml for make sure this but I can't found something wrong. any clue Shashank?
Regards,
-Rius-

Delegated admin problems with 5.2

I just installed iMS 5.2 and the delegated admin server. i'm using Direct ldap, my ldap server is on another machine. my problem is, i cannot log into the delegated admin at all, using any account.
my ldap error log tailed no entries.
this is the ldap access log:
[17/Feb/2006:09:24:00 -0500] conn=250 fd=60 slot=60 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:09:24:00 -0500] conn=250 op=0 BIND dn="uid=NDAUser, ou=config, o=ida" method=128 version=3
[17/Feb/2006:09:24:00 -0500] conn=250 op=0 RESULT err=32 tag=97 nentries=0 etime=0
[17/Feb/2006:09:24:00 -0500] conn=250 op=1 BIND dn="" method=128 version=3
[17/Feb/2006:09:24:00 -0500] conn=250 op=1 RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[17/Feb/2006:09:31:31 -0500] conn=251 fd=61 slot=61 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:09:31:31 -0500] conn=251 op=-1 fd=61 closed - B1
[17/Feb/2006:09:41:31 -0500] conn=252 fd=61 slot=61 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:09:41:31 -0500] conn=252 op=-1 fd=61 closed - B1
[17/Feb/2006:09:51:30 -0500] conn=253 fd=61 slot=61 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:09:51:30 -0500] conn=253 op=-1 fd=61 closed - B1
[17/Feb/2006:10:01:30 -0500] conn=254 fd=61 slot=61 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:10:01:30 -0500] conn=254 op=-1 fd=61 closed - B1
[17/Feb/2006:10:02:49 -0500] conn=255 fd=61 slot=61 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:10:02:49 -0500] conn=255 op=0 BIND dn="uid=NDAUser, ou=config, o=ida" method=128 version=3
[17/Feb/2006:10:02:49 -0500] conn=255 op=0 RESULT err=32 tag=97 nentries=0 etime=0
[17/Feb/2006:10:02:49 -0500] conn=255 op=1 BIND dn="" method=128 version=3
[17/Feb/2006:10:02:49 -0500] conn=255 op=1 RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[17/Feb/2006:10:11:31 -0500] conn=256 fd=62 slot=62 connection from 160.10.4.10 to 160.10.36.186
[17/Feb/2006:10:11:31 -0500] conn=256 op=-1 fd=62 closed - B1
Thanks in advance for any help anyone can give. i know i'll need to provide more detail so if you need any info i'll be happy to divulge it, i just thought this would be an ok starter. I do need some help with this, I just want to get this working.
Thanks in advance for any help.

The old iPlanet Delegated Admin uses a special account itself, rather than the one you use to log in as.
I see that login failing:
[17/Feb/2006:10:02:49 -0500] conn=255 op=0 BIND dn="uid=NDAUser, ou=config, o=ida" method=128 version=3
[17/Feb/2006:10:02:49 -0500] conn=255 op=0 RESULT err=32 tag=97 nentries=0 etime=0
err=32 means, "no such object". This means that this user, NDAUser has been deleted, as have some of the entries above that.
A failure to bind or locate an entry is not "an error" to Directory Server, it's a failed lookup or failure to bind. Nothing like this is going to be logged into the errors log.
It's still clearly the problem....
The password for NDAUser is in clear text in your iDA config file, "resource.properties" Likely, you could create the user and password, or you coule reinstall Delegated Admin.
If you haven't downloaded the later version, 1.2p2, I STRONGLY recommend that you uninstall the version that came with Messaging 5.2, and install the later one.

Start the BI service as Diffrent user in OBIEE

Hi ,
I have installed OBIEE 11g on my PC under "Ram" user having admin permission.
But now I would like to start BI service under "Somu" user also having admin permission.
OS : windows 2012 server
OBIEE 11g
If it is possible please share the steps.
Thanks,

Thanks Sunil,
We tried but no luck...
Can you please provide some other way to do this ?
Thanks,

Delegated Admin and User Management in WLP 9.2

Hi,
I've made Delegated Administrator role and a user for it. The user is Delegated Admin for our users and groups. Still that user cannot create new users, only new groups.
The error message that shows when creating new user is "The subject does not have access to the specified group".
What should I do to make it work ?
Regards,
Tanja

Unfortunately, you've run into a bug in the product. See CR282051 in the WLP 9.2 release notes.
http://edocs.bea.com/wlp/docs92/relnotes/relnotes.html#wp1147925
If you have a support contract, you might be able contact BEA Support to see if a patch might be available.

Changing user profile attributes via the admin console

Hi all,
I created my own login module (like the existing Membership module) which
extends the Login class. It works just fine, and can create user profiles
and allow people to log in. When I log into the admin console and try to
bring up the user profile to edit the attributes for this module [Manage
Domains->(domain)->(role)->Users->(user)->Authentication(authentication
module)] it displays an error stating 'This profile contains no data which
can be administered.' It also does this when I create a user via the admin
console. I know the profile exists (the user can log in, and doing a
'ipsadmin get user (user)' produces the profile). In the login module XML,
all the necessary attributes are set as "userConfigurable=TRUE" with the
right privileges. Looking at the Membership module as a template, I saw it
puts a configuration file in the '/opt/SUNWips/locale' directory which is
used apparently for editing the profiles created by this module. I made a
similar one for my module, but the same error occurs. Does anyone know what
I am failing to do?
Thanks,
Mark

Hi,
After creating your own Authentication module You have to import your "iwtAuth[NewModule].xml" to the profile server.
You can find a sample file for Membership module
" iwtAuthMembership.xml" at "/etc/opt/SUNWips/xml".
Modify "iwtAuthMembership " in the above xml file with "iwtAuth[NewModule] "and import the
"iwtAuth[NewModule] .xml" using
# ipsadmin -import iwtAuthNewLogin.xml
and restart the server.

XI3.1 and delegated admin?

hi,
we have two distinct project. each project must have delegated admin (manage user and group) : each admin must see only its users and groups...
we have apply this :
1/create specific admin groups
2/ create specific acces level (view object/general +add objects/content folder all rights/system user all rights/system usergroup)
3/ on user and groups/manage top level security/all group :
add the two admin groups and apply acces level
4/ on each group and subgroup remove acces on the admin group that does not (because each admin group is in inherited rigth...)
this work, but not for for user level, delegated admin can't create user and if we apply top level security acces level , the admingroup can see ALL user. it's not that we want...
have you ideas?
thank's

Hi Phil!
I think it is designed as is - but did you try to use Windows AD Groups.
You can enable specific windows AD groups to BO. These will be created automatically the first time they logon, or you can trigger an AD refresh. So the users are created automatically.
You admins could then have the rights to see the users only and to see/edit their own set of Groups, where they can put these users to. Also you can define which admin sees which objects (reports, universes, connections, ...)
But: you will get an issue if you loose/change your AD connection to your server, then everything must be redone.
ciao Hakan

Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

Situation:
SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
Windows 7 - 64 bit.
The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
It uses 3 package variables:
*) SQLCommand (String) to specify the SQL Statement to be executed by the package
Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
Value: f:\Output Data.xls
*) EXCELOutputFIle (String) to specify path and filename of the Excel output file
Property path: \Package.Variables[User::SQLCommand].Properties[Value]
Value: select * from CartOrder
*) VarObjectDataSet (Object) to hold the data returned by SQL Server)
Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
Value: System.Object
It consists out of 2 components:
*) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
*) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only. This makes me wonder if it is uberhaupt possible to set the value of a package variable
of type Object.
Can anybody help me on this please ?
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 6:40:20 PM DTExec: Could
not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object. Started: 6:40:20 PM Finished: 6:40:21 PM Elapsed: 0.281 seconds. The package execution failed. The step failed.
Thank you very much in advance
Jurgen

Hi Visakh,
thank you for your reply.
So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
first question about the object type package variable.
Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
Thx in advance
Jurgen
Yes exactly
You need to set values only forthem which needs to be controlled from outside the package
Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to assign the default service package to the user in the command line ?

when i create use use the following command ,which service package is assigned to the user ,or in where can i set the default service package ,thanks for you!
/opt/SUNWcomm/bin/commadmin user create -D admin -F John -l jdoe -L Doe -n jnpc.com.cn -p 80 -w admin123 -W demo -X v120e.jnpc.com.cn -S mail,cal -E [email protected] -H v120e.jnpc.com.cn -k legacy

When I create a user via command-line, I get no service package. I don't see any way to assign such on creation via command-line.
Some of what might be in a service package can be set as default falues, through configutil.
quota is this kind of thing.

Problem allocating service packages to users via delegated admin

Similar Messages

Maybe you are looking for