Problem AMD Radeon 6970m

Hi,as have my iMac 27" under replacement of the video card AMD Radeon 6970M because it is withdrawn by you,pls let me know which card you going tu use.Tank

exclimber,
This is a user to user forum. None of us work for Apple. If you would like to contact Apple, here is a link, http://www.apple.com/contact/
Good Luck
Tommy

Similar Messages

Imac problem with amd radeon 6970m

I live in Kazakhstan where hasn't got any authorized apple services! But my iMac 2011 has problem with amd radeon 6970m. And i need to repair it but i dont know how to do it! Please help me!

В чем проблема?

Sostituzione amd radeon 6970m

Buongiorno qualcuno sa dirmi con quale scheda grafica verrà sostituita la scheda difettosa AMD Radeon 6970m

exclimber,
This is a user to user forum. None of us work for Apple. If you would like to contact Apple, here is a link, http://www.apple.com/contact/
Good Luck
Tommy

Imac 27" - Video card AMD Radeon HD 6970M 2028 MB

Dear All,
I want to buy the Video card AMD Radeon HD 6970M 2028 MB for the 27" imac Mid 2011. Any suggest from where i can replace it or buy it online? any help from Apple store for replacement / alternative?
regards,
Wassim,

iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

Aperture with iMac i7 3.4 AMD Radeon HD 6970M 2GB GDDR5

I am looking to upgrade to the new iMac i7 3.4 (spring 2011).
Currently I am running Aperture 3 via a MacBook Pro 2.66 (NVIDIA GeForce 9600M GT 512 Ram) along with 8GB DDR3 Ram.
Just wondering if anyone has purchased the new 27" iMac i7 3.4 with AMD Radeon HD 6970M 2GB GDDR5 and 16GB DDR3 of Ram?
If so do you see the performance of Aperture 3 running better?
I know that Aperture runs better with more GPU, so I would assume the performance would be better?
Thanks,
Stu

That box will rock Aperture if you order it with an SSD. IMO using hard drives for boot drives is obsolete.
In my case Aperture (3.1.2) on the 2011 17" MBP (OS 10.6.7, 8 GB RAM, HD 6750M; a weaker box than the iMac you suggest) with Apple's SSD imports 3 GB of RAW+JPEG images in much less than a minute and has those images fully processed in about 5 minutes. IMO hella fast. And edits (with both the Aperture Library and referenced Masters on the SSD) are essentially instant.
Only problems with the better Thunderbolt iMacs are:
• Glossy-only display that not everyone can tolerate.
• Hard drives are only upgradable by Apple, a sucky new trick in Apple's bag.
But as far as Aperture performance goes all the top end Thunderbolt boxes will be spectacular. I cannot say enough good things about Aperture performance on SSD setups; IMO no Aperture user should buy a box without SSD.
HTH
-Allen

Parallels desktop 7 running WI7 can't recognize my AMD Radeon HD 6970M?

Hello, Apple Support!
Thank you for beeing here, and I hope you can solve my problem explained below.
I've got Parallels desktop 7 installed on my intel based iMac 27", where I have Windows 7 installed.
Today I bought Hitman: Absolution and intstalled it without any problem on my Parallel desktop with Windows 7.
When I tried to run it, a pop up came up with the infomation about direct X 10 missing and no graphic card detected.
When I later on serach the internet for a solution I found that you could install the AMD Mobilty Drivers, but here with no success.
Why can't Parallels Desktop 7 with Windows 7 installed recognize my AMD Radeon HD 6970M.
Thank you in advance.
/Ludwig Lindstrom
Sweden

LOL for starters you should not be posting this issue here but rather on the Parallels forum.
And you may find that Parallels 7 is not DX10 compatible.
Look here it works with version 8 apparently
http://forum.parallels.com/showthread.php?p=656058#post656058

Windows 7 can't recognize my AMD Radeon HD 6970M 1024 MB graphics card

Hey community -
I am having issues running Star Wars the Old Republic on my brand new iMac desktop with Windows 7 installed. I am getting an error message that is associated with the fact that WINDOWS 7 will NOT recognize my AMD Radeon HD 6970M 1024 MB graphics card. Under the displays/drivers it's showing up as standard VGA graphics, which won't cut it.
I was recently having an issue missing drivers for my network card, which I fixed by going back through bootcamp and using a startup disk with all the drivers I needed.
HOW do I get Windows 7 to pickup/detect my Radeon? Help!
-Monty

You can install the AMD HD RADION Mobile drivers which work from.
If your Graphics card number ends in M
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx#2
This also depends on if you installed 32bit windows or 64 bit. you will need the 32bit drivers if installed 32 bit windows.
Download the full package under individual downloads.
But before you install the amd drivers you may need to install the boot camp drivers again, which include the motherboard drivers, sound, usb, etc etc etc.

Issues with CS5 Liquify in my iMac with a AMD Radeon HD 6970M 2048 MB Graphics Card

I have been trying to get to the bottom of this issue on my own, but to no avail. I am running Photoshop CS5.1 Extended on an iMac with an i7, 16 GB of RAM and an AMD Radeon HD 6970M 2048 MB graphic card. I am running OSX Lion. Speed of the computer should NOT be an issue, but my liquify tool is impossibly slow. I have seen others having this issue, but am not finding resolutions. I have updated all of my software (Lion, CS5) and updated my drivers. I have uninstalled Photoshop and reinstalled it, but still, no help.
My Liquify tool is so slow that it is impossible to use. It does not register if I release the mouse either and I often have to click a few times to release the brush. I have Photoshop 5.1 on a PC and the Liquify runs very smoothly.
Has this issue been addressed? I am wondering if it has a root in how CS5 is reacting to the graphics card? When I called Adobe, they swore it was Apple's fault. When I talked to Apple, they were positive the blame lay with Adobe. I just want a fix. (Hey, I'll take a CS6 beta if that'll fix it. )
Thank you,
Rachel

Do you have any third party plugins installed? If so, have you tried disabling them? (one was showng to cause a slowdown, but I don't have my office notes handy at the moment to remember which one)
Also, there was one obscure third party utiliity program (haxie) that also caused slowdowns in Liquify. (and again, my notes are at the office, so I don't recall the name)
And you can try the usual: trash/reset Photoshop's preferences.
Oh, and Lion still has a bunch of video driver bugs that Apple is continuing to work on.
Sorry I don't have more definite info right now.

Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
Any assistance with this problem will be greatly appreciated.
Thanks,
Tony

First I would disconnect the TV HDMI cable from the computer. That should return the PC screen to normal. May have to reboot to get normal. Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Problem in Graphic Driver AMD Radeon HD 7670M

Hi Guys ,
i'm new Here ,i had Hp Pavilion G6 2332se ,it has AMD Radeon HD 7670M ,i tried to update it but this was the result
please help me ,how to solve this problem ?

Hi @AhmedZizo ,
Welcome to the HP Forums!
It is a dynamite place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having a difficulty installing an AMD driver as you have switchable graphics.
You provided your model but when I checked the specification page it came with Free Dos. What Operating System are your running?
Here are two documents to assist you with this difficulty.
Overview of Switchable Graphics or Dual GPUs
HP Notebook PCs - Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
I am unsure of where you obtained the driver update, but you should only use the recommended ones from HP .
Here is a link to the HP Pavilion g6-2332se Notebook PC Drivers. You will need to select the correct Operating System and follow the prompts to display all the recommended drivers for you.
You may also consider contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Any problem with AMD Radeon or FirePro graphic cards?

Hi.
I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
Which is your experience?
Thanks.

FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.

AMD RADEON GRAPICHS HD 8750M PROBLEM

Hey, last week i just bought a new laptop , Lenovo G510. I installed windows 7 (32 bit) and everything works fine , excepts my graphic cip (AMD RADEON GRAPHICS 8750M). In DXDIAG menu it says my graphic cip is Intel(R) HD Graphics 4600. And when i try to entry in Graphics Proprietis it says I need to install framework net 4.0 but i cant , it givs me a error. Can u guys give me a website or something where i can download my graphic cip ? Games are working horrible , i mean some games that i had install need at least a pentium 2.5 ghz processor and i have I5 and this graphic cip and they are working horrible , if someone could help me I would appreciate it. Thanks

I couldn't message you (frztbyte99) some problems appears and here the message
Hello friend .....
I have AMD Radeon HD 7690M XT (2 GB DDR5 dedicated)
my current driver is 2011-11-18 version 8.882.2.3000
is very old
and never update it or there is no update has come since I bought the notebook
when I installed 14.4 version and after restart .... this message comes
how do you update to13.12 driver version ???????

AMD Radeon HD 6750M, Early 2011 MBP, 10.9.4 Problems

Hello,
Ever since 10.9.3 update I have a serious problem with my Early 2011 MBP with AMD Radeon HD 6750M card.
First my configuration:
MBP 2.2 GHz Intel Core i7 (Macbook Pro 8,2)
16 GB RAM
512 GB Sandisk SSD and 750 Stock HDD
AMD Radeon HD 6750M and Intel HD Graphics 3000
OS X 10.9.4
I'm usually using my MBP with external display with a resolution of 1920x1080. The display is connected via DVI to Mini Display Port adapter. When I connect the external display, my MBP switches to the AMD card. Here's where the problems begin. If I'm using Davinci Resolve, Capture One Pro or any other software (that I use regularly) that uses the GPU extensively, the cpu usage will rise, the computer will start to feel sluggish and my productivity almost becomes none because even the simplest tasks such as opening another tab in firefox or safari takes anywhere between 1-3 sec. When the computer starts doing that, I cannot play a simple HD video at native fps and the whole machine basically becomes too expensive paper weight. The strange thing is that even after I quit all programs, the system cpu usage continues to be high, around 50% with kernel_task being the star using all this cpu and it keeps using all of this cpu forever, at least until i shut it down or disconnect the external display and manage to make it switch to the internal Intel gpu.
The problem started after istalling the 10.9.3 update and it's still there with the 10.9.4 update. I even formatted the computer and reinstalled everything but the problem still persists.
I haven't experienced anything like this on 10.9.2 and the machine was actually quite fast before that. Now, I have too expensive paper weight on my desk.
Since the problem is very specific, I doubt many users will complain and I doubt Apple will ever do anything to fix it, at least until hopefully the new drivers in 10.10 fix the issue hopefully.
My question is:
1. Has anyone else experienced this and managed to solve the problem?
2. How can I downgrade to 10.9.2? I don't have time machine backup but i have bootable usb with 10.9.2. Will it help?
All best,
Goran

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
☞ Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem with amd radeon hd 7600M in windows 7

I recently purchased a dell inspiron 15 3521 with intel hd 4000 nd amd radeon hd 7600M. The problem is when i play any high graphics game, a continous strem of hoizontal lines appear on the screen from top to bottom. Also i am not able to get
the catalyst control center options in the pull down menu. In addition to that, the real radeon driver installed is 7600M series. But when i check online, it says 7670M series /
Does anyone have any solutions regarding above ?

Hi,
Just as it is mentioned in the post, playing a high graphics game calls for high performance graphics card, I suggest to go to the official site of this game for detail information.
Besides, I suggest to download and install the newest driver from AMD official site and check the result:
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
Regards
Wade Liu
TechNet Community Support

Problem AMD Radeon 6970m

Similar Messages

Maybe you are looking for