Problem at the time of Cal. of Service Tax at the time of MIRO

Hello,
When we are running MIRO, at that time system is calculating wrong amount of Service Tax against clearing agent Invoice verification.
In that if we change the Quantity to 0.001 unit then system will calculate right amount of service tax.
In OBYC Tcode we have maintaine Transaction ZCA for Clearing Agent. But when we see in the Table T030A - Transaction Keys and assignment to Groups, Transaction ZCA is not there.
How can i assign the Transaction ZCA to this table ?
CAn anyone help me ?
Ragards,
SAN2008

CAn any one solve this problem ?
Ragards,
SAN2008

Similar Messages

HT4623 I was given an iphone 4 (unlocked) in the UK, but despite my service provider changing the sim it will not connect to the network here in Australia. Any ideas on what the problem is?

I was given an iphone 4 (unlocked) in the UK, but despite my service provider changing the sim I'm still getting no service. Is ther something else that could be locked to a UK network on the phone? Cheers, Ray.

Expanding on what Tim said to make sure it's clear, only the carrier to which the iPhone is locked can authorize unlocking. If Optus is the original carrier, as would seem to be the case, O2 would not be able to unlock it. Only Optus can authorize the unlock, so you'll need to contact them. They say, though, that only the account holder can apply for unlocking, so you might not be able to get it unlocked and will have to work through the person from whom you bought the iPhone.
For more information, see the Optus FAQ on unlocking.
Regards.

Issue while playing the content of Azure Media Services after deleting the channel.

Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit. Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
Christine

After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

Vendor service tax at the time of down payment

Hi sap Guru's
Service Tax payable on Vendor Advances at the time of down payment.
Requirement: New tax code X5 need to create with CST@5% on 80% of Bill value and service Tax @12.36% on 70% of Bill value. While calculating the CST amount, system should take the base value by excluding the service tax amount.
I had created the requirement and at the time of posting in F-43
The service tax calculating.
But when i am posting in F-48 the tax is not calculating. What is the reason
For down payment f-48 i need to make any configuration, or need to maintain anywhere the tax code x5
Please advice me why at the time of down payment F-48 the tax is not picking.
Thanks & Regards,
Ramesh

Thanks you very much for your reply sudhir,
If i select ,"Posting without tax allowed" check box why the system is not going to calculate the tax
And in recon account should i maintain G067. or any else.
Thanks,
Ramesh

Service Tax condition not picking during MIRO

Hi,
Referring earlier posted thread,
http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
During MIRO, Service Tax Amount is not Picking... Why???
There is any solution for it.....

Hi,
If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
Why both things need to create...??
No need to maintain
check for your service tax condition type
Cond. class A Discount or
Calculat.type A percentage
Cond.category B Delivery co
and you have accrual tick for your condition in t-code M/06
also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
M/08
Regards
Kailas Ugale

Problem with Start or Stop of Portal Service from outside the portal

Hi ,
Can we manage(start and stop) the portal sevice, which is implemented by IService from out side the portal like Visual Administrator or any other.
Please let me know if any solution for this.
Thanks in advance
Tatayya M

solved myself

Unable to use all the feature of my email service (Juno on the web) like; font size/color, bolding, italics, highlighting etc why? Those features work through Internet Explorer but not Firefox.

When I go to my Juno on the web through Firefox, I am unable to use the tool features such as:
Font size / Color
Bolding
Italics
Bullets
Highlighting
just to name a few. Yet when I bring it up through Internet Explorer these features work, plus the way Firefox reads my Juno the tabs are distorted (the page is not formatted correctly, I contacted Juno they said I should contact my modem company AT& T they said no so you are my last resort.. Please help resolve my issue, THANK YOU in advance for assisting with this matter.

It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html <br />
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's.

Asset PO with Installation charges and service tax?

Hi Sap guru's,
I searched for this topic but could not find answer. I want to create a Asset PO which had Installation charges (with Service tax). Now I want to incorporate the installation charges with its service tax to the asset account. I tries many ways but could not find the solution. Please, help me <removed by moderator>
Thanks,
Karteek.
Message was edited by: Jürgen L

Hi,
You needs two tax codes!
You PO contains 2 line items, so create 1st line item with a tax code(S1) of 5% non-credit tax and 2nd line item with another tax code(S2) of 12.36% non-credit service tax.
Both tax code S1 and S2 should have created with service tax condition with different tax percentage 5% and 13.62 % respectively where the same service tax condition type should assigned to NVV key in your tax procedure.
Regards,
Biju K

Service tax on Import

Hi All,
We have purchased an imported raw material which is Excisable. The Clearing Agent has charged some thing for clearing on which service tax is applied.
Now, I have to Inventories the raw material purchased along with service charges by clearing agent?
Please help me?
Regards,
Abhishek
Edited by: Abhishek A on Oct 31, 2008 6:01 AM
Edited by: Abhishek A on Oct 31, 2008 6:49 AM
Edited by: Abhishek A on Nov 6, 2008 10:37 AM
Edited by: Abhishek A on Nov 12, 2008 11:17 AM

Hi Abi
you have to make the JE for the clearing expenses along with service tax. The clearing expenses along with tax amount will goes to landed cost calculation for item cost determination.
regards
asupathy

Problem in service tax code...

hii guys... my client is facing a problem... a po is made and at the time of service tax is not to be calculated... but i made config. in the service tax code assigned percentage to jstx(12),jec5(2) and jes3(1%)... now when they run miro.... service tax has starting coming in miro... which shouldn't calculate.....how i can do that... providing screenshots of both
Screenshot 2- The old process was like this line 2 and line 4 entered in miro then line 5 =18250 i.e 146005*12.5% and then line 6 is calculated on on basis of line 5.. then line 7,8,9 are service tax which is calculated on s3 only. line 10= line 4+7+8+9*12.5% how i can make this config.?? please guide

Hi,
Please delete Service Tax conditions in FV12 for S1.
Regards,
Tejas

Changing the base price for service tax calculation

Hi
i have and PO order with basic price say for 100 /- on which it is calcuating service tax 12% , e-cess 2% hcess--1 .This is coming thru tax code from the tax procedure and these taxes service/ecess /Hecess is to be posted to sepearte G/L account.This is working fine.
Now my requirement is that i want to calculate service tax on some % of the base price say 70 % of the base price. The % will always be changing .i want to calculate service tax on the 70/- not on 100.
i want that system should post this 100 /- to cost of service but the tax should be on whatever percentage i make .Here this is 12.36 % on 70 not on 100 at the time of invoice posting.
please guide me
regards

Hi,
For this you have to maintain the all your charges in your pricing procedure along with each charge you have to maintain 3 condition types for service and chesses.
Ex:
step counter cond.type des.                   from                 to
1 1 P000 Gross Price
1 2 P001 Gross Price
25 0 JM00 Water front royalty                 1
26 0 ser1 service                                  25
27 0 edu1 educationcess                      26
28 0 edu2 se.edu.cess ;                        26
29 0 jm01 Port Dues                                1
30 0 ser1 service                                   29
31 0 edu1 educationcess                       30
32 0 edu2 se.edu.cess                           30
like this you have to built your pricing procedure in a m/08. after that for you want the service tax automatically so for that you have to put the accesses sequence in you service condition types (ser, edu1,edu2).in m/06.
After that you have to maintain info record for that material and import vendor. in me11 in that in condition tab you have to maintain percentage for ser, edu1, edu2 . the system will calculate the service charges automatically.
Thanking you,

How to Define MQ message expire time in OSB Business service.

Hi,
Please let me know the option in OSB business service to set the expiration time for MQ messages. Is it possible?
Thanks,
karthik.

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/mqtransport/transport.html
transport header "Expiry"
i hope it works :o)

Problem: Field not a member of external service

Hello,
using the NWCE 7.1 SP 5 and the corresponding NWDS I have successfully imported an external RFC "/EDC/GET_IT_MAT_WF" into my composite application. For the imported RFC I have created an application service and mapped it to the RFC. Another application service relies on the mapped application service and is exported as a web service which in turn is used by a Visual Composer model. Everything worked fine.
Now, I have added another parameter "SONDER" to the RFC in the R/3. In my composite application I have deleted the previously imported RFC and the mapped application service and created them from scratch.
However, when invoking the newly added mapped application service I get an exception which reads:
Field SONDER not a member of /EDC/GET_IT_MAT_WF.
Firstly, I have checked the RFC and tested it in the R/3 using the ABAP Workbench.
Secondly, I have checked the newly imported external service and the mapped application service. Both do contain the field "SONDER".
Thirdly, I have undeployed the entire composite application, cleaned it in the NWDS, regenerated, rebuilded, and finally redeployed it.
However, the exception still remains.
What am I doing wrong?
Thanks and best regards
Alexander
PS: The exception trace looks like this:
com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field SONDER not a member of /EDC/IT_MAT_WF
at com.sap.mw.jco.JCO$MetaData.indexOf(JCO.java:9662)
at com.sap.mw.jco.JCO$MetaData.isTable(JCO.java:10606)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.createTypeRefVal4JCORec(RFCExecuteManager.java:457)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.createTypeRefVal4JCORec(RFCExecuteManager.java:441)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.fillElementsOfTable(RFCExecuteManager.java:607)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.createTypeRefVal4JCORec(RFCExecuteManager.java:486)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.createTypeRefVal4JCORec(RFCExecuteManager.java:441)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.convertJCOFunction2Values(RFCExecuteManager.java:367)
at com.sap.caf.rt.connectivity.rfc.RFCExecuteManager.executeRFC(RFCExecuteManager.java:304)
at com.sap.caf.rt.connectivity.ExecutionManager.executeRFC(ExecutionManager.java:52)
at com.sap.caf.rt.connectivity.ExternalOperationExecutor.execute(ExternalOperationExecutor.java:82)
at com.sap.caf.rt.connectivity.ExternalOperationExecutor.execute(ExternalOperationExecutor.java:55)
at com.sap.caf.rt.bol.da.remote.GenericOperationExecutor.execute(GenericOperationExecutor.java:53)
at com.esprit.purchase_requisition.modeled.appsrv.materialservice.MaterialServiceBean.getMaterialListBapi(MaterialServiceBean.java:42)

Hi Yasar,
thank you very much. That helped. Should have come to my mind on my own.
Hopefully, SAP fixes those caching issues, as the current situation is not acceptable in a production scenario. You just cannot keep on restarting the whole server each time a composite application changes.
Best regards
Alexander

What is the sequence of starting EPM services for Fusion edition manually?

Hi,
I have installed the entire suite of v11 but couldn't figure out the correct sequence of starting up the services for different products. Does anyone know the start up sequence of Hyperion services?
Thanks.

Please read page 88 of the EPM_Install.pdf documentation from the EPM Documentation also available online.
Here is the excerpt from the pdf
Summary List of Services and Processes
The following EPM System product services and processes are listed below in their recommended
startup order.
1. Databases for repositories. (For a list of EPM System products that require a repository
database, see “System Requirements” in Oracle Hyperion Enterprise Performance
Management System Installation Start Here.)
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Shared Services OpenLDAP, or Oracle Internet Directory, depending on which is used as
Shared Services Native Directory.
4. Shared Services application server
5. Oracle's Hyperion® Remote Authentication Module
6. EPM Workspace Agent (CMC Agent)
7. EPM Workspace application server
8. EPM Workspace Web server
9. Performance Management Architect Services
10. Essbase Server
11. Administration Services application server
12. Smart Search application server
13. Integration Services Server
14. Essbase Studio Server
15. Provider Services application server
16. Reporting and Analysis (in any order):
a. Financial Reporting Services
b. Web Analysis application server
17. Remaining services or processes (in any order):
● Performance Management Architect application server
● Performance Management Architect Data Synchronizer application server
● Smart Space
● Smart Space Collaborator
● Financial Reporting application server
● Calculation Manager application server
● Planning application server
● Financial Management service
● Strategic Finance service
● Performance Scorecard application server
● Performance Scorecard Alerter application server
● Profitability and Cost Management application server
● Data Relationship Management services
● FDM Task Manager service
● Application Builder for .NET

Problem at the time of Cal. of Service Tax at the time of MIRO

Similar Messages

Maybe you are looking for