Problem: Audio Device Change While Listening
So this is a problem that I have noticed on pretty much any computer I have worked on. If I am listening to iTunes through my standard speakers and then I connect my bluetooth headset, iTunes will still try and play out of the speakers while Windows plays out the headset. I have to restart iTunes for it to understand that I have a new audio device (which also happens to be the default). There has to be a way for iTunes to change playback devices somehow. In Windows it is changing correctly in Control Panel -> Sounds and Audio Devices (in XP). It changes from SigmaTel Audio to Bluetooth Stereo Audio in the Volume and Audio tabs. This is also a problem in Vista. I have noticed it does this with both of my bluetooth headsets OR if I change from standard out to optical out on my home sound card. It is like it takes that initial setting and refuses to change when Windows does....
Anyways, any help would be GREAT! Thanks!
Hello Charlotte
Please check in device manager if the sound card is installed properly (start-control panel-system-hardware tab). The card must also be enabled. If there is everything ok please check also in control panel Sound and Audio devices properties. There are lots of settings. Maybe is one of them responsible about that. Please check also Volume control.
You can find it under start-all programs-accessories-entertainment-volume control. Check there if there is all set to maximum especially volume control and WAVE.
Bye
Similar Messages
-
Problem: Audio device only accepts microphone
Alright. Ive been googling around, looking at other threads that have this problem without any success.
This is the case:
I want to stream with FMLE with stereo mix as my audio device but i cant do that.
To start off with, stereo mix is enabled. Its not set as a standard device or anything such as that but its enabled.
For the second picture, the "list" of my audio devices in FMLE. Note that there is no stereo mix.
As the problem got more frustrating, i found this thread
http://forums.adobe.com/thread/941171
I tried to exactly what it said, but as you see on picture number 3, there is no
"HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum 64-bit\{33D9A762-90C8-11D0-BD43-00A0C911CE86}"
So i couldnt copy any settings to
"HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{33D9A762-90 C8-11D0-BD43-00A0C911CE86}"
I have reinstalled my motherboards audio drivers, which by the way is Realtek HD Audio, or something like that, without any success at all.
I have tried Viritual Audio Cable and checked regedit for any outputs/inputs but i couldnt find any.
I have also tried elder versions of FMLE but ive been having the same problem.
My specs are the following:
MS Windows 7 Home Premium 64-bit SP1
Intel Core i5 2500
16,0 GB Corsair Vengance
Gigabyte Technology Co., Ltd. Z68X-UD3H-B3
GeForce GTX 570
977GB Seagate ST31000528AS ATA Device
ANY help is VERY appriciated!I have sound but FMLE and manycam are not detecting audio devices and also have a profile validation error. From reading the posts I should have "HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{33D9A762-90 C8-11D0-BD43-00A0C911CE86}" in my registry but it's not there.. Where do I add it and how?
Thank you -
Ipad screen freezes while listening to music
this problem has occurred several times since i upgraded to IOS5 and basically when i am listening to music and want to change playlist or genre,etc... the screen freezes and it will not let me change to what i selected.Whatever i'm listening to that's it unless i go and restore ipad to it's original settings and then it works well until down the road it decides to freeze and must perform restore again.
Please help.Thx.Ok,i am replying to my question and i have found the solution!
I had set my auto lock to never and when i changed the auto lock to 15 minutes all my problems went away.It's been a week and my problem with the screen going black and not beign able to make any changes while listening to the music app has not come back.
Hopefully whomever reads this and has the same problem just follow my example and you should be fine.
Good luck -
E52 crashes while listening to radio (regular not ...
I have a problem with my E52 while listening to regular radio it crashes at random times.
Very quick reboot occurs (faster than regular startup).
After couple seconds there is a message displayed "Requesting divert status" for ~2seconds and the phone is oparable again.i know - jus gotta wait till fw update x
E52 - Product code 0585050 -
High Definition Audio Device - Device Cannot Start (Code 10)
I am having a problem isolating an indication in the Device Manager with the High Definition Audio Device. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64 bit, but that did not make any difference. The Device Manager indicates that "This device cannot start (Code 10)" Driver Date 7/9/2015 / Version - 10.0.10240.16384 / Microsoft Driver Details Tab - Value = High Definition Audio Device From the Events Tab - (Information)Device HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_80860101&REV_1000\4&36c4990c&0&0301 requires further installation. Any guidance is greatly appreciated.
Hi The problem HD audio device you are seeing is the Intel HDMI audio device that needs a driver. I looked around for a W10 driver for the hardware ID you posted, and can't find one. You don't need that device unless you want/need audio through the display port. The only suggestion I can offer would be to try the W7 Intel graphics driver from your notebook's support and driver page, but install it this way...so that you just target the problem audio device... Download, but don't run this graphics driver... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4095873&swItemId=ob_127914_1&swEnvOid=4059 Download and install this free file utility. 64 bit is the second file listed. http://www.7-zip.org/ After you install 7-zip, right click on the graphics driver file you downloaded, and select 7-zip from the list of items. Have 7-Zip Extract to: and let it extract the driver to the folder name (sp64360). Go to the device manager and click on the problem Intel HD audio device needing the driver. Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option, and browse to the driver folder 7-Zip created. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot. If you explore the driver folder 7-zip created, and open the DisplayAudio folder, you will find the setup information file that has the hardware ID you posted as supported by the driver. Whether or not this audio driver will work on W10, that I do not know. But if you want to give that a try, that would be a way to do it without messing with the actual graphics driver.
-
I have been a Firefox user for many years and I still use it as my primary browser. One problem that has bothered me for years is the fact that when Firefox is open and I change my default audio output device, Firefox doesn't respect that change and continues playing audio through the device that was originally being used. Even if you stop the audio and continue playing, the output device doesn't change.
Is there any way this can be configured in Firefox? Now if I listen to music online (e.g. Soundcloud) I always use Chrome since it's respects the default audio output device change even while in the middle of playing audio.
Reproduce:
1. Start playing audio (e.g. from a YouTube video; HTML5 and Flash are affected)
2. Change your default audio output device
3. Audio will continue to play from original output device
Thanks!This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.
-
MPD: ERROR: problems opening audio device
Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error
ERROR: problems opening audio device
This is my mpd.conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/adriaan/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "adriaan"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
group "users"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
#audio_output {
# type "alsa"
# name "Sound Card"
# options "dev=dmixer"
# device "plug:dmix"
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"milso wrote:
type "alsa"
name "equal"
device "default"
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
I have mine set to plug:plugequal as I use an equalizer with alsa, but when I set it to default it works fine, try that.
That didn't work out.
Mr.Elendig wrote:Tell mpd to be more verbose. And check that mplayer -ao alsa whatever works.
Here's the output of mpd -v
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: daemonized!
daemon: writing pid file
Doesn't contain anything unusual.
EDIT: oh, and mplayer -ao alsa works fine.
Last edited by arthd (2011-02-09 15:14:09) -
Can firefox change audio device preference without restarting?
I use my PC as a home theatre as well as for day to day usage, and have multiple audio devices.
For most usage, I route the sound through on-board audio (realtek) but for watching movies, I run it through the ATI HDMI output to the TV.
Currently, in order to watch a movie, I have to shut down Firefox, change windows prefered audio device, then restart Firefox.
Can I change the device preferences somehow within Firefox without restarting it?Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
HP High Definition Audio Device Code 10 Error -- Causing HDMI Sound Problem
Hey guys, my laptop is an HP ENVY TouchSmart m7-j010dx Notebook PC, running Windows 8.1.
When I connect my laptop to my LG Smart TV through HDMI, I cant change the playback device to play the sound from the TV. The HDMI option does not appear in ¨Sound¨.
When I look in Device Manager, under Sound, video and game controllers; the High Definition Audio CODEC has an error which says (Device status):
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
I have tried reinstalling and updating the drivers, cleaning and defraging the registry, optimizations etc.
I followed steps from other posts with similar problem as mine and nothing seems to work, I do not want to reinstall my windows just for this! I am running out of options, I tried everything I could for the past week. I would really appreciate some expert advice.
Thanks!Replied on: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-High-Definition-Audio-Device-Code-10-Err...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Default audio device doesn't change until restart
I have speakers and usb headphones, I had no problem switching which device is used, but now when I change the default device a restart is needed to actually change where the sound comes from. This is extremely annoying. Using Windows 8.1, don't think
it matters ehat the headphones are, cause they work fine, but - logitech g930. So to sum - i change the default device, it gets the green thick next to it, but sound still comes from the previous one until pc is restarted, it used to work fine on the same
windows, maybe some update changed it.Open Audio Midi Setup, Click the Plus button. Witch should add "Aggregate Device" to the Audio Device List. Click on "Aggregate Device." On the right hand side it should list all the audio device you can use for the Aggregate Device, if US-200 is on the list, check the check box to the left of "US-200".
Then click on the gear on the left hand side of the window, chose "use this device for sound out".
If you still can't get it to work, you might want to check to see if your mac is in 32 or 64 bit mode. If you want to check: Apple menu, about this mac, more info button, from the left column click on the word "Software." On the right column there should be a line that says "64-bit Kernel and Extensions:". witch should say yes or no.
the reason to check, would be some drivers only work in 32-bit mode. -
I can not find a setting to change this. Music will play with screen off or using another app while listening but the podcast app does not allow this
Have you checked for updates to the podcast app in the app store? There was an update that addressed exactly this problem a few days ago.
-
Error while billing after device changes
Dear Experts,
While i am trying to bill the customer on 29.09.2011, iam getting following error.
any clue please help..
the customer having device changes like following
mrdate DEvice Reason Mr reading
20.09.2011 C 01 134
23.07.2011 C 21 117
22.07.2011 B 22 3615
25.03.2009 B 21 3345
24.03.2009 A 22 760
24.03.2009 A 02 760
20.03.2009 A 01 758
13.10.2008 A 06 667
*Internal error: Error when reading internal table x_INST-IETDZ in isu_copy_inst_for_reg_extrapol
Message no. E9890
Diagnosis
An error has occurred reading an internal table.
It is probably a program error. A data inconsistency may also exist.
System Response
The system can not perform your command due to a program error.
Procedure
Note:
The message text and message number
The name of the internal table and the name of the module/form
The transaction/report
The entries which lead to this error.
Send a problem message with these specifications to SAP.*Hi EnergySaver,
Can you please check SAP note - 1281304. Please find the details below:
Symptom
You perform billing for an installation using dynamic period control and the system issues error message E9 890 'Internal error: Error when reading internal table x_INST-IETDZ in isu_copy_inst_for_reg_extrapol ".
Other terms
EASIBI, EASISI, EAMASI, EAMABI, E9 890, 890(E9), EABL, ABLESTYP, DPC, dynamic period control, LOGIKZW, IZWST
Reason and Prerequisites
This problem is caused by a program error.
The device or register data has been changed during the billing period. However, the logical register number has not changed. The corresponding removal reading was estimated (meter reading category 03). A proration also takes place within the billing period, for example due to a price change.
Solution:
Implement the corrections attached in the SAP note.
Please let me know if this helps you in sloving your error.
Thanks,
Mayuresh -
HP ENVY TS 15 Notebook PC: Problems installing audio driver (High Definition Audio device)
Hello all,
My product is the HP ENVY TS 15 Notebook PC.
Product number: E3B65PA#AR6
OS: Windows 8.1 64-bit
A few days ago, I upgraded my windows from windows 8 to windows 8.1 and found that no sound coming from the HDTV when connecting my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. I have checked the HDMI cable and it is working fine with other laptop.
Device manager is showing 2 device :
High Definition audio device ( Showing yellow traingle)
IDT High Definition Audio CODEC
When I am opening the properties of High Definition audio device it is showing :
This device cannot start (code 10)
{Operation Failed}
The requested operation was unsuccessful.
If anyone knows how to fix the problem, please help me
thanks in advance
This question was solved.
View Solution.Hi:
The IDT audio driver (notebook speakers) appears to be working fine.
The problem is probably with the Intel graphics driver which controls the HDMI audio.
My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208... -
Hi!
My computer is HP Compaq 7900p small. I bought new graphics card which is Asus AMD HD6450. When I test it I saw problem - no sound.
When I click on Sounds tab, I see that AMD HDMI Output-AMD High Definition Audio Device - not plugged in and I couldn't change it to default device. When I troubleshooted it, problem was that one or more audio devices isn't running.
I was searched in google for solution, and found it that I need to change in BIOS from DVI port to HDMI port, but in my comp BIOS version is 7.11 and I don't see where it would be changed.
Only what I did was that I swapped integrated audio to enabled then I get sound from my speakers, but AMD High Definiton Audio Device still isn't plugged in. Please help me change it to default!
Pleeease answer! in other subjects I wait for months! ;( Thanks for your advice!
Filips
This question was solved.
View Solution.Hello Filips,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Compaq dc7900 Small Form Factor PC is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
The support page for your product may be helpful in the meantime:
HP Compaq dc7900 Small Form Factor PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Elitebook 2540p Motherboard changed. Integrated motherboard IDT audio device missing in windows 7.
Hi,
Old situation:
(I recently changed motherboard for my computer Elitebook 2540p. When i installed windows 7 to my computer the computer doesn't list any audio devices in device manager page. I've checked bios for any faulty settings and they are all set right. Theres no yellow marks in device list either and all drivers seems to be installed.)
New situation:
Installed windows 7 again and computer found / installed audio devices normally. I tested computer for hours to play audio from it and everything worked fine. I restarted computer several times / re installed battery to the computer. On one restart the computers audio quick mute button below the screen appeared to be orange and the sound speaker icon in windows was marked as X. I check device list again from device manager and there was no audio devices listed (No sound devices at all). After that i restarted computer and before the computer started downloadin windows i pressed the mute button and it turned blue. I then went to windows and sound devices / sound was working again.
Old situation:
I have motherboard integrated IDT audio device.
When i try to install audio drivers from hp site for 2540p i get "Your system does not meet the minimum requirements for this update." And the device manager doesnt list any IDT audio devices.
I then installed xp and the computer found IDT audio device normally and the sounds are working correct.
New situation:
After i did new windows 7 install and all my audio drivers installed / devices showed in device list / audio worked i downloaded audio drivers from HP driver site and installed them to the computer.
Audio problems has not been occured again after my HP screen mute button turned to orange / Windows sound speaker was marked as X / Computer didn´t find any audio devices.
Currently waiting if the problem occurs again and trying to think what would cause this ( Hardware problem or software)? And how to fix it permanently.
Any help for this problem?
BIOS is updated to newest version from HP driver download center.
All windows drivers are installed.
Motherboard info: Product Number VB841AV
Product Model BU RCTO i7-640LM fMdm 2540p
598762-001 MB SYS W/PROC CORE2 DUO 2.13 GHZHi Jarppi,
Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
Is is worth it to install 107? After all the reviews I am still undecided. I have Office 2011 and CS3 and want everything to work.
-
Hi, when I drag a pdf file (when working in Preview) into iBooks Author, the background colour in the pdf file changes into the background colour of the book. This happens not consistently, sometimes the background of the pdf file does not change (an
-
Import and rename photos via Automator and ExifTool
Hiya, Just finished my work on a Automator workflow in order to import and rename photos from a portable hard disk. I had the problem that my portable hard disk (with integrated card-reader) was not recognised by Image Capture or Aperture. Therefore
-
Clean up old SID values from an InfoObject that does NOT have master data
I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID t
-
I have a pie chart works great! Its like this: 4 Brands of Vodka, each has been sold into x number of Accounts for my Vodka there are a total of 17 Accounts that have gotten sold. In my Pie Chart there are 4 slices (I have 4 Vodka Brands), Now I know