Problem between K7T266 Pro2-RU and ASUS GeForce 3 V8200

Hi, i've installed an ASUS GeForce 3 V8200 in my K7T266 Pro2-RU.
The system starts correctly, but when i force the AGP from BIOS at 4x all games doesn't run very well...
I usually play games like UT or RTCW and when i run they i see many problem with the 3D rendering and shadow build...
All drivers are up to date...
How can i resolve this problem ???
Thanx...

Quote
Originally posted by Fredrik Åsenius
I guess you got your problem solved. Just wondered about:
Did you uninstall the previous drivers?
Do you have any PCI cards near the AGP?
What are your system temperature, according to BIOS?
I think i'll follok the Toenne suggest. The difference between the AGP 2x and 4x is very small, anyway my drivers are (un)installed correctly and i don't have any PCI card near the AGP slot. Instead i think that in the future i'll pay more attention at the temperature problem: my Athlon XP 2000+ is hot also with a good copper cooler...
Another questios is, can anyone help me to find the best BIOS settings for my system?
In the next days i'll post my BIOS configuration so we can see where i've mistaken.
Thanx again...

Similar Messages

MSI K7T266 Pro2 ARU and D-Link Trouble

I've just bought a wireless ethernet system from D-Link. A PCI adapter called DWL-520+ (22 mbs)
When I try to start up my PC with the Promise RAID enabled it won't boot, I disable the RAID controller... the PC boots and the D-Link card works great.
I've tried to switch places in the PCI slots. Nothing helps. And yes; I've cleared the NVRAM...
Could anybody please help me?
My system:
MSI GeForce3 TI500
MSI K7T266 Pro2 ARU (with BIOS v3.6)
Creative Audigy
D-Link DWL-520+ Wireless NIC
3COM 3C905C NIC
Windows XP SP1
Thanx !

Quote
Originally posted by Router
Please see the similar thread "POST failure D-Link DWL-520+ Wireless".
I have also just takled with D-Link Tech Support and they say that there is a newer unpublished driver available. The agent said that he thought there was a known problem using the DWL-520+ with MSI boards and that a fix was becoming available.
My mobo is K7T266 Pro2 RU and im thinking about purchasing a D-Link 520+ (DWL 520+) wireless adaptor
but im not sure wether my mobo is PCI compliant as D-Link suggests. Can anyone help me out?

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

That is not possible.

K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

Hello ,
I was using my mainboard with 32 MB Creative Riva TNT2 Ultra until creative's fan was damaged . I tried 16 Creative TNT2 m64 display adapter of a friend of me , but it didn't work with K7T266 PRO2-RU. Many sounds are coming from mainboard while D-LED shows Testing RTC (or boot attemp, I'm not sure about that) (Same symptoms with "no graphic adapter" - I tried again after unplugged the display adapter - )
At the beginning I was thinking that the 16 MB creative graph adap. was broken . So , today I bought a new graphic adapter 128 MB of Creative 3d Blaster5 Radeon 9200SE . When I plugged it into mainboard , I saw the same problems with 16 MB Creative TNT2 m64 . After that , I found another 32 MB Creative TNT2 Ultra from my friend and it worked with my mainboard FINE .
- I tried all of the old bioses of MSI K7T266 PRO2-RU
- I tried to start the computer with no any other devices (such as HDD , sound card , tv card etc. ) . Only display adapter was plugged in the mainboard , but it didn't work . System hanged up everytime I tried .
- I made some bios adjustments which are suggested at this forum ....
But none of these worked .... ?(
What is the problem ? Why only 32 MB creative TNT2 Ultra is working with my mainboard , but 16 MB Creative TNT2 M64 and 128 MB Creative 3DBlaster5 Radeon 9200SE are not while all of them are working FINE with an old PII mainboard . (tvout+DVI) I'm looking forward to hear from you . , Help me please .
Ps : Can new beta bios solve that problem ?
XP pro
2100+ 0.18m XP CPU with coolermaster CP5
40 GB Seagate Barracuda IV
300 watt Codegen Power Supply
2*256 MB Kingston DDR 2100 Memory
( No floppy , no souncard , no tv card etc , no any other devices like cdrom , dvdrom , cdrw etc.)

That's it!
I provided a few PSU's from my friends and tried 420 watt thermaltake and 520 watt VANTEC Stealth 520A PSU ...
Same situation happened and 128 MB Creative ATI Radeon video card didn't work ...
The problem can not be about PSU ...
I tried two different brand of fx 5200 (128 MB ) video card on my system (with 300 watt codegen PSU) . Everything is ok .
And I also tried the RADEON card on my friend's computer which is running with 230 watt Elan Vital PSU . It worked perfectly ...
So what can I think about that situation?
The Answer is : There is something about MSI mainboard ... When I wanted to contact with support center via e-mail , I got an automated e-mail answer which is not completely able to solve any of my problems.
Besides , I saw the problems between brand new Nforce mainboard of MSI and ATI video cards ...
SO , if we get all of these informations together , we can say "THERE IS SOMETHING ABOUT MSI" ...
The solution is not buying expensive PSUs...
That's really bullshit , I can buy a brand new mainboard instead of an expensive PSU.
Finally , I bought an Asus mainboard , everthing is going ok now!
I'll not buy products of MSI anymore because they didn't do anything to solve my problem . Goodbye MSIIIIII ....................................... ........

Problems with K7t266 Pro2 and Soundblaster live 5.1

Hi all,
having a bit of a problem here with the above combination K7T266 pro2 and SB live5.1.
When playing music, watching video etc. every now and then I get something that sounds like bus noise, just for a few seconds and then the music continues, sometimes it also happens that video stops during the few seconds.
I have latest bios on mainboard, latest drivers for SB live, Via chipset, latest GPU drivers.
I tried changing IRQ's, took all other cards out, etc.
Nothing seems to work and it is getting very annoying. :( :(
Anyone any tips or tricks??
Thanx
Greetz
Jay Smith

Quote
Originally posted by hansh
Hi Martin,
Some times, there is no other solution than changing the soundcard for another brand (which is not funny to read if you just ordered a new card - but you just might be lucky, right? )
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAA

K7T266 Pro2-RU and Promise FastTrak100 RAID Drivers

Hello
I am trying install my 2 new Seagate HardDisk in the IDE RAID on my K7T266 Pro2-RU motherboard without success.
MotherBoard's IDE RAID BIOS can see the two 160GB HDD that I have installed and Windows XP can not see it with the lastest BIOS v3.7 and the lastest Promise FastTrack IDE RAID Controller ( v2.0.90 Build 10 ). Both HDD are not detected by Windows XP by using F6 key, However my 2 40GB HDD are detected by Windows XP without problems.
I have 2 K7T266 Pro2-RU motherboards and they have the same problem, I think that the really the problem is the fasttrack.sys driver Could be it updated ?
Does anyone have new Promise Drivers for Windows XP ?
Cheers.

Yes I do, I have used that drivers for many time and they are very old in this moment because Seagate Barracuda 7200.9 160GB are not visible, only my IBM DeskStar 40GB works fine with that drivers.
I have tryed to use the last fastrtrack.sys v2.00.0.25 from Promise Technology without success which has support to large HDD above 137GB and needs BIOS update to my motherboard v2.00.0.24 in FastTrack (tm) "Lite" BIOS v2.00.1030.23.
http://www.promise.com/support/download/download2_eng.asp?productId=15&category=driver&os=0&go=GO
I have installed Windows XP SP1 in my IBM DeskStar 40GB on IDE3-RAID and works fine, later I have installed another HDD Seagate 160GB on IDE4-RAID and Windows XP can not see it.
Later and I have put the new fasttrack.sys (v2.00.0.25) driver in Windows XP and with a reboot machine, Windows XP can see my new HDD160GB HDD like a 149.05GB unpartitioned drive ( which is corret ). When I put the old fasttrack.sys driver Windows again can not see the 160GB HDD
Later I going to install the Windows XP SP1 in the new Seagate Barracuda 7200.9 160GB and the IBM DeskStar 40GB by using F6 key and neither HDD were visibles. So I can not continue with the installion
Later I going to install WinXP again with the old drivers and once again only IBM 40GB is visible.
I need your HELP MSI Support Team.
Thanks in Advanced.

MSI K7T266 Pro2 RU and XP2100

Hi
Could you please try and advise on a problem with a MSI K7T266 Pro2 RU (V2) motherboard. This works perfectly OK when installed with an AMD Athlon 1Ghz CPU, however when I install an Athlon XP2100 (Green – Palomino Core) CPU the machine will not boot-up.
I know the CPU is OK, as it works in another machine. I am running Windows ME with Bios V3.3.
Your advice would be appreciated - Thank You.
Ian Messenger

Hi
You have to use bios 3.5 minimum
3.3 only suppert 2000+
remember to set clock to auto
Quote
Originally posted by Ian Messenger
Hi
Could you please try and advise on a problem with a MSI K7T266 Pro2 RU (V2) motherboard. This works perfectly OK when installed with an AMD Athlon 1Ghz CPU, however when I install an Athlon XP2100 (Green – Palomino Core) CPU the machine will not boot-up.
I know the CPU is OK, as it works in another machine. I am running Windows ME with Bios V3.3.
Your advice would be appreciated - Thank You.
Ian Messenger

MSI K7T266 Pro2-RU and 200GB HDD

Since 2001 I have used my computer builded with MSI K7T266 Pro2-RU ( 6380) mainboard.
A week ago I bought a new Samsung's hard disk (SP2014N) with 200 GB capacity. Before connection of the new disk to my computer, I upgraded BIOS to the newest one, downloaded from MSI Web site.
The new disk is connected as master to IDE-0 interface and to the second IDE is connected my old 40 GB Seagate (as master) and DVD recorder NEC ND-3520 (as slave). The BIOS has detected the new disk as Auto, the old one as User type (47), the DVD recorder as CD and everything looks right, but there is a problem: I can not connect any drive as slave on Primary IDE channel. The BIOS does not recognize the HDD or CD/DVD connected to slave on Primary channel.
Can you help me, please?

To Osnavi's questions: yes, yes, yes, yes.
To DaveR: my both optical drives worked as slave together with my old Seagate HDD (40 GB) and everything was fine.
I don't like to connect both hard drives on the same channel, because I'm working with huge video files and I need some speed of independent HDDs.

Wireless Communication problem between HP Photosmart C309g and Linksys E2500 router

Hello,
I used C309g connected to DLink Dl-624 router (wireless connection) and everything was working correctly. Now I changed the router to Linksys E2500 (dual band router) and I've got strange problem I cannot fix.
The printer connects to router, obtaint IP address and network report does not indicates any problem. Also HP Print & Scan Doctor does not report any problem.
But when I try to print from my laptop, the pint start and is quickly broken, and I've got the message that printer is diconnected. The printer stops. When I leave it for a coupl of minutes, the printing starts and after few lines stops again with the same message on the laptop.
When I return to DLink router, everything works correctly.
I tried with 4 different laptops, with different operating systems, and i've gor the same issue. But the laptops communicates well, the network does not break..
I enforced router to use IP reserved number for the printer, used the same IP range and number for my network and printer on Linksys and DLink, does not help. I've turn off firewall on the router - does not help. I've change the channel range for 2.4 GHz network to 20MHz only - does not help.
What would be the problem with it? Is there something related to dual-band? Any idea?

Well, I did not install the printer drivers from cd, I did it from the Hp webpage. Looking for the potential problems I reinstall the drivers and it did not helped. I also turn off the firewall router application and it also did not help.
I suspect I have the printer firmware up to date e.g my version is WHM1FN0931BR.
I've made some test with router settings: switch from automatic WPS configuration to manual and tried network mode as wireless b only (default was mixed). This makes the communication between router and printer continuous (no breaks), I could normally scan documents directly to network drive, but could not print at all: the printing option on my laptop pops up, and looks like document was sent to nowhere.. printer did not start to print at all. But other network devices starts to experience connection breaks and performance issues. When I returned to mixed mode, the communication between network devices returns to normal operation, but not with the printer - where I experiences original problems.
My network is quite complex - 4 laptops and 2 TV sets communicates (wireless or LAN 100mbit cable ) via cental router with NAS server (with DLNA) and internet (DSL cable modem). Router also works as DHCP server, where any server type devises (e.g my printer) has reserved IP addresses (based on MAC number). No matter if I try to print from wireless or via LAN cable laptop, no matter what OS is on laptop. I have even tried to connect the printer via LAN (forcing DHCP to give the LAN pronter the same IP as was previously for wireless ), and stil the same: communication is broked and the print starts and suddenly stops.., then starts angain after few minutes - and stops (the same problem as wireless). So I do not understand what the hell is going on. Rest of my network works perfect .. except this printer.. Any other idea, what coul be the issue?

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

HT4623 Problem between iPhone 4, PC and iTunes. Please help!!

I inserted the plugs between my iPhone 4 and my PC. And then, the iTunes connected automatically. However, I dont know why the update function cannot stop at my iTunes and my mobile cannot run again automatically. Please help. Tks

It could be caused by a weak phone connection.

Problems between a Wireless Controller and a Switch.

I have a Wireless Controller 4402 connected to one sw2960G.
I configured the controller with LAG and the switch (sw2960G) with etherchanel.
I connected the controller 2 distribution ports to the 2 ports of the switch (configured with etherchanel).
It worked like it should work.
But the problem is like this: if I take one cable that is connected to the switch and unplugged that cable from the switch (if that cable is the one connected to controllers port one) I have connectivity between both machines.
If I plug in the switch the cable connected to controller port one and take the other cable and unplugged that cable from the switch I stop the connectivity between the two machines.
I think that was not supposed to happenâ¦ because the LAG in the controller should put every AP in the second controller's port, and the connectivity between the machines should not end.
Can any one help me?
Can any one tell me what I am doing wrong?
Thanks in advance,
Rui

With LAG enabled in the controller I think I can have only one ap-manager interface.
The LAG will (it is supposed to) do the load balance automatically.
I mean, if one of the interfaces is âdownâ the other will have to coupe with all the AP's.
I should have always connection between the controller and the switch.
The STP of the controller is configured by default (STP Mode = OFF).
In the case of etherchannel load balanceâ¦ I saw the Cisco documentation and I did not saw any thing about that. I think that The LAG as to do that for the controllerâ¦ I'm right about that?
I will see the link that you advisedâ¦
Can you help me?
Thanks,
Rui

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Weird problem with Macbook Pro 15" and Asus PB278 monitor

Hi there
I recently bought a brand new MacBook pro 15" the one with a dedicated nvidia 750 vid card. However I'm facing weird problems while connecting it to a external monitor Asus PB278 (1440p monitor). I use a mini display port to display port cable.
My problem is: Sometimes it works perfectly, but then if I put the laptop to sleep, sometimes it won't recognise the screen at wake up, at first I tried to restart the system, power on and off the monitor, connecting and reconnecting the cable... nothing worked. I even bought a expensier cable thinking it was probably a low quality cable. I found that then only way to fix this is to connect the monitor with a mini display to HDMI cable I have (won't support over 1080p), and then put the mini display to display port cable again... it is freaking bizarre.
This is very frustrating, I live outside the US and while the retailer will honor the guarantee I'm not sure if this is a Software or Hardware problem, It will take them about 3 weeks to replace my system which is unfortunate due to I have plenty of work to do. I don't want to send it on guarantee just to find out hey... display recognition is broken again. My questions are:
Is there a way to know if this is a hardware or software problem?
I've heard Yosemite is having some issues regarding external displays, is this one of those?
Have you found yourself experiencing this problem? Could you fix it?
Sorry if my english is a bit weird, thanks in advance.

Hi Gatobolo,
Thank you for contributing to the Apple Support Communities.
It appears that you've discovered unusual behavior with your MacBook Pro and an external display, where you need to temporarily connect a different display adapter before you can use your Asus PB278 again.
I can offer some additional tips to help resolve or further isolate the issue you're seeing.
First, try the following resets to see if they eliminate the behavior:
You can reset the Mac's parameter RAM and SMC.
Next, if the issue occurs again, try restarting your Mac into Safe Mode:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
You can find the steps above in this article:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
If your display is recognized in Safe Mode, or after restarting again, the issue may be due to a software conflict.
Another suggestion mentioned in the article above is to try a different type of display adapter, such as a Mini DisplayPort to Dual Link DVI adapter.
If the issue persists, you can also back up your data, erase your hard drive, and reinstall a fresh copy of OS X Yosemite.
OS X Yosemite: Erase and reinstall OS X
If the issue still occurs after a clean install, troubleshooting the hardware may be necessary.
Best Regards,
Jeremy

Problem between K7T266 Pro2-RU and ASUS GeForce 3 V8200

Similar Messages

Maybe you are looking for