Problem creating directory entry

InitialLdapContext is created using INITIAL_CONTEXT_FACTORY = com.sun.jndi.ldap.LdapCtxFactory. The following call attempts to create an entry in the directory:
context.createSubcontext("gid=BLANK,ou=ouname,dc=dcname", Attributes);
In this scenario:
-Will jndi send to the directory an attribute named gid with a value of
BLANK if said attributed is not explicitly provided in the Attributes
object?
- If so, can this behavior be overridden?

Hi,
JNDI will not send gid attribute with the said value in the DN. You have to specify the attribute value in the attribute list if you want to add it to the entry.

Similar Messages

  • Anyone else having problems creating autotext entries in Word 2003 after installing Acrobat 10 pro?

    After installing Adobe Acrobat 10 Professional I can no longer create Autotext entries in Word 2003.
    It seems to specifically be a problem with the Acrobat PDFMaker plugin for Microsoft Office as if I dont install that option Autotext does work however I need that functionality.
    I've tried version 10.0.0 and 10.1.3.
    Is anyone else having this problem?

    It looks like Acrobat v7 had a similar issue preventing Microsoft Word from saving changes to the Normal.dot template which was later resloved in the 7.0.5 patch.
    http://web.archive.org/web/20100329065242/http://kb2.adobe.com/cps/331/331259.html
    Its mentioned under the "Background Information".

  • Log4j problem -creating directory

    My Log4j.properties is as follows:
    log4j.rootLogger=info,stdout, R
    log4j.appender.stdout=org.apache.log4j.ConsoleAppender
    log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
    log4j.appender.stdout.layout.ConversionPattern=%c %d{ISO8601} -- %p -- %m%n
    log4j.logger.org.apache.commons=INFO
    log4j.logger.org.apache.struts=INFO
    log4j.logger.org.hibernate=INFO
    log4j.appender.R=org.apache.log4j.DailyRollingFileAppender
    log4j.appender.R.File=../CustomeLog/myLog
    log4j.appender.R.datePattern='_'MM-dd-yyyy'.txt'
    log4j.appender.R.layout=org.apache.log4j.PatternLayout
    log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%n
    CustomLog folder does not exist in tomcat home directory.. i want it to be created automatically. i have written servlet for that. but problem is that servlet is read after log4.properties.. so tomcat gives me error fileNotFound as it cannot get CustomLog folder..
    can anybody help me on this issue?? My aim is that whenever tomcat starts, customLogs folder shud be created if it doesnot exists.. log4j takes the care of the rest..

    See if this forum thread helps:
    http://forums.sun.com/thread.jspa?threadID=5193205

  • Problem creating directory configuration for BPM when using secure ldap

    I have all the configuration sorted for the creation, but when the config wizard tries to connect to the server I get this:
    fuego.directory.DirectoryRuntimeException: Exception [sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target].
    I'm assuming it's because the config tool isn't using my keyStore, but I am unable to find out where I add this!
    Thanks
    mARK

    Hi,
    The problem got resolved when we tried same thing in BI publisher 10.1.3.4.2 (xmlpserver) in weblogic 10.3.5. It seems that BI publisher 10.1.3.4.1 does not have dynamic URI support.
    Thanks,
    Sanjaya
    Edited by: Sanjaya on Sep 4, 2012 2:09 AM

  • Unable to create database entry in the directory service. - TNS-04

    We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
    Unable to create database entry in the directory service. - TNS-04409: Directory service error
    We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
    In the meantime, I found these errors in the oid logs:
    oidldapd01.log:
    2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
    connection
    Any ideas?
    Thanks
    Naiying

    Hi,
    Thanks for update.
    No, didn't find DSCC agent logs get updated when I have the pop up.
    C:\dsee7\var\dcc\agent\logs
    In the glassfish server log, I didn't find new transaction when I hit the issue
    C:\glassfish3\glassfish\domains\domain1\logs

  • Having problems installing firefox error msg says error creating directory c:\programme files (x86)\mozilla firefox\searchplugins

    Hi, I have been having problems with Internet Explorer 8 using Windows 7 so wanted to install Firefox but unable to as get a message saying error creating directory c:\programme files (x86)\mozilla firefox\searchplugins

    Thank you guig2! Followed your bleepingcomputer.com link above and found the problem was my permissions on C:\Users\Bill\AppData\Local/Temp. It was not "Full Control" for my User or Administrator. Updated the two lines to permit full control for folder, subfolder and files. Ran perfect.

  • Web Page Composer: Problems creating entry points for iViews

    Hi experts, i´ve been trying to add an iView to a page. I know i have to create an entry point to a folder created on the PCD.
    I followed instructions on help link http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/content.htm
    Now, when i try to create a new entry point link to the pcd folder i don´t see any navigation that can get me to the pcd.
    Actually When i click the browse button it opens the Web Content folder where i can see 2 subfolders
    - Cross-Site Content
    - Sites
    I also have this options:
    - Favorites
    - Personal Documents
    - Recently used
    - Common folders
    - Public Documents
    None of it seems to be the access to the PCD.
    I´ll appreciate any help
    Thanks in advance

    Hi Sandeep,
    i don't know if your problem was solved already.
    Here a quick overview of all steps, that you need to perform.
    1. Make your PCD available in the KM.( See Link below for details) Your folders need to have 'Read'-Permission for the Everyone-group!
    2. Search your iView-folder now in the KM. Look at Details -> Properties -> Access Links -> ID
    3. Provide this ID in the wpcDragExplorerEntryPoints . (Should be sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder; /pcd)
    Link to SAP Help Documentation
    Best Regards,
    Marcus
    Edited by: Marcus Böhm on Jul 3, 2008 12:11 PM
    Edited by: Marcus Böhm on Jul 3, 2008 12:13 PM

  • Problem in Creating Service Entry Sheet

    Hi,
    We have a Service PO. When we are creating Service Entry Sheet for it, showing error msg -
    "Goods receipt for purch. order" is not allowed (ORD 10000722)
    What should be issue...

    Hi,
    I am very sure that PO is created with the account assignment -F (Internal Order) , So provided IO number in PO under account assigment tab is already locked by your accounts/commercial team.
    Please check if the Interal Order is blocked ,you need to activate IO again from KO02 or either change your IO accordingly.
    Hope this will resolve your issue.
    Thanks & Regards,
    Sandesh Sawant

  • Problems creating new Web Dynpro ABAP application

    All,
    I am following this tutorial to create my first Web Dynpro ABAP application
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm
    In this tutorial I was asked to create a component as Local object.
    But after giving the name of the component, I get an alert saying
    "Object can only be created in SAP Package"
    When I confirm this, I was shown a "Create Object Directory entry" dialog box which asks for attributes like Package.
    And this box has Local Object button, when clicked I get the message "Test Objects cannot be created in foreign namespaces".
    I found some other article through Google
    http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
    According to this, I tried to give $TMP as Package. But still have the same error
    "Test Objects cannot be created in foreign namespaces"
    Where am I and what should I do to create a new project?
    Thanks.

    Thanks Abinav.
    My problem is with naming convention only. Component name starting with Z solved my problem.

  • Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

    Hi BW Experts,
    I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
    Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
    A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
    Thanks in advance for your help.
    Best regards
    Christian

    Hi Abdullah,
    I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
    So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
    I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
    I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
    Anyway, thanks to all of you for your help!
    Best regards
    Christian

  • Has anyone received this error, "Failed to create directory for PX images"

    I recently migrated to Windows7.  98% of the migration went well. All of my pictures and Elements Catalog came over fine.  I had to "reconnect" all of the pictures in the catalog due to new directory name, but it worked fairly well.  Of the 11,000 entries synch'd with photoshop.com, 10,500 re-synch'd fine. However almost 500 are stuck with an error of "Failed to create directory for PX images".  Can anyone help with how to resolve this issue?  Note, I did try to remove the picture from the album and then re-add, but that didn't work.
    Thank you in advance for any help you can provide.
    Thanks,
    Jeff

    function(){return A.apply(null,[this].concat($A(arguments)))}
    JeffAGoldberg wrote:
    Erased everything on photoshop.com (which I couldn't accomplish due to bugs on photoshop.com) and created a new catalog.
    Jeff
    What problems are you facing in deleting files from PS.com. Are you able to maintain a proper synced catalog now ? If possible please elaborate so that we can help.

  • I have two lists. The first is "Tasks", second is "Journal". I need a "Create Journal Entry" link in the Tasks list. How do I do that?

    Let's say I have a Task named "Build SSIS for Duke Energy" and it has another column called Active. Now every day I look at my task list and If I worked on that task I want to create a Journal entry of what I have done. So from the Task
    list I'd like a third column that calls the "Journal Entry" list's new form page and pass it in the ID of the task. I have found several TextToHtml scripts out there, but they have to be stored in a script library, and then sourced to a content
    editor web part. The problem is they don't fire when I have my list grouped. In addition to, every time someone creates a new view, I have to go in and add the Content Editor web part, point to the script....
    Any thoughts. It is the grouped view that really bug me.

    Hi,
    If you only want to add a hyperlink to create a Journal entry in the task list, I recommend to add a Hyperlink column in the task list and then create workflow to update the column.
    You can follow the steps as below:
    Open the task list, add a hyperlink column named Create Journal Entry.
    Create a workflow associated to the task list, start the workflow automatically when an item is created.
    Add actions as below:
    Then when a task is created in the task list, the workflow will be stared automatically to update the “Create Journal Entry” column.
    Thanks,
    Jason             
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Error in creating New Entry from the Client in NW Mobile 7.1

    Hi All,
    I have created a mobile application for Laptops in NW Mobile 7.1.
    I have a requirement to create an entry from the client, i.e., I need to create a PR in the client. The model bindind, the backend adapters, bapi wrappers are in place.
    I have used the standard create BAPI for PR and wrapped it in a BAPI wrapper. I just have to give the PR details and save the entry in the client. The BAPI wrapper has the logic for generating the new PR number.
    My problem here is, when I try to create a new PR, give the details and save, the entry is not getting updated in the backend and the sync state is '201'.
    I checked the "Message Monitoring" in the NW Mobile Administrator for the particular SWCV.
    For this create PR transaction, the particulars are as below
    Message State: Error - Stop Flow
    Message Type: Transaction
    Error: "Error occurred while fetching synckeys from table ZDOE01700000SL"
    "ZDOE01700000SL" is the Sync key look up table for PR(my data object).
    Please let me know where I have gone wrong and guide me in rectifying this problem.
    Thanks and Regards,
    Sunil

    Hi Sunil,
    From my understanding, looks like you are not filling synckey when you are creating a PR in your client. Synckey is a unique key on the DOE using which you can uniquely identify any node.
    There are two scenario's atleast as I know, where this error would have come.
    Case 1. If you are modifying something on client, which has been send by DOE, then you are not supposed to change synckey because it is a primary key. Now if we assume that you are not modifying synckey but when you are sending an update, check if by any chance the synckey is not going to DOE which is one case, and the second one is, after DOE has end that record to client, someone has cleaned up all the tables on DOE for that dataobject or someone has deleted that entry on the backend because of which the entry has been deleted on DOE. In either case, you are modifying something on client which is actually not present on DOE because of which when the DOE tries to look up based on synckey it doesn't find the needed record.
    Case 2. If you are creating something on client, then you are supposed to create a synckey which is a 32 bit character GUID. I think in your case, you are missing the synckey when you are sending it to DOE. Check if there is any API for doing that or you have manually create a GUID and send it.
    Hope it works out.
    Best Regards,
    Siva.
    PS: Reward with points if you find the post useful.

  • Can not create directory error while creating database

    i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii
    and pawii is the sid
    actually oracle is installed on u01 and i am creating database in u02
    but this error is not allowing me to create database but when i try to create database in uo1 the database installed successfully but this is not happening when i try to create database in another mount point u02

    987018 wrote:
    so finally i had solved the problem myself as people like rukbat are very unhelpful in nature here
    all we had to do is we had to change the group of the folder to oracle and oinstall where we are going to create our new database :)Actually he tries to be quite helpful. But sometimes the help you need isn't the help you want.
    "When you need me but do not want me, then I must stay. When you want me but no longer need me, then I have to go." (Nanny McPhee)

  • Cretaion of UTL.File in Oracle 10G and directory entry in Ora.ini file

    Hi,
    Kindly advise me if:
    (!) we can create a directory and log file in this directory on some other server instead of creating it in the file system of the server where the Oracle 10G database is residing?
    Created directory in Oracle using create or replace directory command.
    My package will be creating a log file using UTL.File in the above directory.
    I want to create this directory on some other server to save my log file/s. Is this possible?
    (2) Also, let me know in Oracle 10G, do we need to add the directory entry (mention above in #1) in the Ora.ini file on the Oracle 10G server?

    Hi,
    1) utl_dir are different from directory object
    2) you cannot create directory on remote server and there is no need to write directory entry on oracle init file (not ini..)
    Acr

Maybe you are looking for