Problem creating source list

Hi
   We are on ECC 5.0 and in one of our ABAP programs create a PIR as a first step using ME11 BDC call and then go ahead to create a sourcelist for the material + plant and the vendor ( for which PIR was created in the first step ) .
To create source list we use the following function modules ( fms )  in sequence
ME_INITIALIZE_SOURCE_LIST
ME_DIRECT_INPUT_SOURCE_LIST
ME_POST_SOURCE_LIST_NEW
What we observe is that - the ME_DIRECT_INPUT_SOURCE_LIST fm always raises an abort message - ' No PIR exists for the material and vendor ' even though PIR is created in the first step and we check for its existence before we call the fms for the source list. However if we introduce a wait for upto 15 seconds after the PIR has been created the sourcelist creation goes through.
Any idea why the above is happening. Similar situations faced with source list creation - shared is appreciated. Correct answers helping me solve this problem will be promptly rewarded

Hi Karthik,
System takes some time to COMMIT all the work thats why it's happening.
Keep the WAIT FOR UP TO <reasonale seconds value> SECONDS in your code.
Regards,
Atish

Similar Messages

  • I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Create source list for blocked vendor

    Hi all,
    A client wants to create a source list for a material with a vendor that is blocked for purchase. (XK05, 'purchasing block' checked)
    Is this something that can be done in configuration?
    Thank you.

    Dear Eagle,
    When Blocked for Purchasing, system wont allow to create Source List also below error message is throwing,i tried practically.
    Not possible to generate any source list records
        Message no. 06717
    Diagnosis
        The system was not able to determine any procurement information (i.e.
        purchasing info records or outline purchase agreements) for the
        material(s).
    System Response
        No source list records have been generated.
    Procedure
        If procurement information does exist for the material, check the
        selection criteria you entered (e.g. material or plant number).
    I know system wont allow to create source list also but you saying system allow,thats the reason i tried practically.
    we canot do any funtions realted of procuring i mean combination of Purchasing organization.
    may be your dout is this only
    Prem

  • Problem creating mailing list with Server Console

    Hi,
    when I create a new mailing list, I do the following:
    1. Right click on groups folder in Console
    2. Choose New->Group
    3. Entering all data and checking "Mail Account" under Account
    The documentation sais, that a Mail-tab should now appear. But this is not the case for me!?
    I can only create the group like this and have to add the attribute "mail" - to enter an email address - manually..
    Is this normal? Am I doing something wrong or missing something? Also disallowing posting on this group can only be set manually. Shouldnt all this be done using a nice GUI dialog?
    I'm using Directory Server 5.2 Patch 2. Also tried 5.2 Patch 4. Both same problem.
    Thanks in advance
    david

    got the instructions from the "Sun Java System Messaging Server 6 2005Q4 Administration Guide", chapter "Managing Mail Users and Mailing Lists with the Console Interface"-"Managing Mailing Lists":
    http://docs.sun.com/app/docs/doc/819-2650/6n4u4du0e?q=messaging+server&s=t&a=view
    Step 6 sais: "Click the Mail Account box. -> The Mail tab becomes visible in the Create Group window."
    Thanks,
    --David                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Problems creating source system

    I am trying to create a source system in BI 7.0. I created the logical system for ECC 6.0 and assigned the logical system to the client. I then tried creating the source system. The source system gets created but not in the SAP folder where I intended it to be but in the BI folder. I am able to replicate data sources normally but I am unable to force it into the SAP folder no matter what I tried. I suspect there might be errors in creating the logical system or assigning them. If anyone has come across this issue or if you have information of any notes, please respond. Answers will be rewarded with points.
    Thank you,
    Ravi...

    Hi,
    How are you expecting under BI folder. SAP is the correct folder for it. Is it your ECC system is a SAP(R/3) system or not. If we connect any other BIW system to your BIW system, then it will come under BI folder. But your R/3 systems comes under SAP only.
    With rgds,
    Anil Kumar Sharma .P
    Ignore the above message.The same issue had been raised few days back and atlast the proble was resolved. So kinldy search the forums.
    Message was edited by:
            Anil Kumar Sharma

  • How the source list is created automatically

    Hi all,
    Cud any one tell me is there any way to create the source list automatically. as per my knowledge we need to give the tick for the plants we want the source list should be made mandatory while creating the material master.
    How can be make the Source list field for the Purchasing view mandatory while creating the material master .

    Hi,
    You can have the system generate a source list for a material automatically. The system offers you the possibility of quickly entering or updating all source list records for a given source list.
    With this procedure, a source list record can be created for each info record and/or each outline agreement item for one or more materials.
    You can create the source list for several materials (collective procedure) or a single material (individual procedure).
    Prerequisites
    Before you create source list records, consider the following:
    For which materials/plants are the source list records to be generated?
    Are only outline agreement items, only info records, or both be taken into account? (Decision only in the case of the collective procedure.)
    What is the validity period of the source list records to be generated?
    Do source list records already exist for the materials for which you want to create source list records? If so, you must decide whether the old records:
    May not be changed
    Are to be deleted
    Are to be excluded from the validity period of the generated source list records
    Activities
    Collective Procedure
    With this procedure, you generate the source list for several materials.
    Choose Master data Source list Follow-on functions  Generate.
    Enter the necessary data.
    Create the source list.
    A list of the source records to be generated is displayed. Already-existing source list records whose validity periods are thus changed are also listed.
    Select the source list records you want to include in the source list.
    Fixed or blocked source list records: You can mark a source list record as "fixed" or block it. A "fixed" source represents the preferred source of supply, whereas a "blocked" source is one from which you are not allowed to order. Select the desired source list record. Then choose Edit  Fix, or Edit Block.
    Choose  to store the selected source list records for the displayed material in the source list.
    Exception messages are displayed by the system. Press ENTER to continue the saving process.
    Individual Procedure
    With this procedure, you generate the source list for a single material.
    Choose Master data  Source list  Maintain. The initial screen for the source list appears.
    Enter the material and plant number. Then press ENTER to display the overview screen.
    Choose Edit  Generate records.
    In the dialog box which appears, enter the validity period of the source list records to be created.
    First determine how existing source list records are to be treated if their validity periods overlap with the one specified. To do so, set the appropriate indicator in the dialog box. Press ENTER . The source list is created.
    Click  to save the source list.
    BR
    Diwakar
    reward if useful

  • SDN: Generate the source list by contract automatically

    Hi Experts,
    please help !!!!!can't find an answer !
    I want to set a background job of ME05 to generate the source list by contract automatically, but it seems not work. Is there anyone who knows how to set the job of ME05? Or any other way to generate the source list by contract automatically? Many thanks.

    Dear Elena,
    You can create source list automatically from an Outline aggrement.For thsi on the outline agreement overview screen , select an item for which you wish to enter source list record & choose Item --> Maintain source list.If you have not maintained a plant in the outline agreement line item, you must enter the plant for each source list record.
    Also for creating source list automatically path is
    SAP Menu> Logistic > Material management > Purchasing>master data > Source list
    This will solve your problem.
    Reward if useful
    Vivek Maitra

  • ME05 How to schedule source list job with steps?

    Can someone please give me instructions on how to create source list ME05 in background using "Steps"? I know how to create a background job in ME05 but need to have several jobs run back to back in the middle of the night. I am reluctant to shedule them at different times and would prefer to use the "Steps" function. Thanks for your input!

    Hello
    Steps:
    First create variant for the report in normal execution mode (to provide input selection parameters in backgrpund)
    1. Transaion code SM36
    Give Job name you want created (Give some meaningful name) and Press enter
    2. Give the ABAP program name
    3. Select variant and save the selections
    4. Come back to initial screen , select the Start condition button and provide the interval as per requirement to schedule the job and save.
    5. Save the job.
    Check the Job in SM37 and relase the Job.
    warm regards
    Rama

  • Creation Info Record at Material group,Source List & Assign source to PR

    Hi All,
    Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
    Completed at my end:
    1. Creation of Info Record at Material Group level
    2. Maintained Source List at Material level.
    Issues/ Errors:
    1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
    2. Material differs from the Material from the Info Record.
    Help / Information required :
    1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
    2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
    Can anyone please provide the soilution to the above points?
    Thanks in advance for the solution.
    Regards,
    Pavan.

    Hi Please create Contract and refer same while source list. This will help
    Regs,
    AD

  • Source List - Mass Change

    How to change source list in Mass?
    Like I have several materials for which source list is already created for more than one vendor for few materials.
    But MRP relevevant indicator "1" is missing.
    How to update the same in all materials for all vendors.

    Dear,
    If you want have all relevants data for creation of source list. You can create source list for upload source list.If you want to step by step guide document for creation of lsmw please give our mail id. Otherwise check MASS t-code for upload source list of material.
    If it is useful, Please revert back.
    Regards,
    Mahesh Wagh

  • Source List for Material Group

    Hi All,
    How do I maintain a source list for a material group.? Since ME01 requires a material, I cannot create source list in this tranasction.
    The client want a the Source (for material Group) to be assigned automatically in PR assignment step.
    Again, within a material group there can be several infor records, For example:
    Mater Group: Office Supp.....I can have two infor rec for the same vendor....one with "Short Text" Notepad and another info rec with "Short Text": Paperclips. Or the second info record could be a different vendor also.
    How could the system know which one to assign as a source since it's the same material group (one for Notepads and the other for paperclips)??
    Thanks in advance

    Hi duke,
    In SAP we have a choice of creating source list for a "Material Group ". Following is the method.
    You may have the outline agreements related to material group rather than a single specific material - For ex. outline agreement with a item category M( Material unknown) or      W ( material group).In doing so you can decide whether to exclude or include certain materials of the relevant material group by means of the source list.
    To create the source list for a material group proceed as follows.
    1) On the outline agreement overview screen, select the items for which you wish to enter the source list record & choose Item --> Maintain source list
    2) To exclude the particular material keep the "Exclusion" indicator set against a material with a validity period.
    I hope this will be useful to you.
    Vivek

  • Source List creation

    Dear Gurus,
    Here in client place we are havng one material(Aluminium) with different dimensions. They are maintaining material codes as per the dimensions. They are purchasing the material from Three vendors.When creating source list they need to assign the materials to the vendor automatically, instead of entering it. Is there any possibility for doing this?. kindly solve this doubt of mine.

    HI,
    First Maintain Info Records between those materials and Vendors. Then go to Source list creation - ME01 and click on generate records button (ctrl+F7). Then vendors will come automatically.
    Hope it helps.
    Regards,
    sai.

  • Purchasing Info Record and Source list

    Hi all,
          I am using purchasing info record along with a price for the vendor and material.  This would get the net price into the Purchase order.  Do i really need to create source list ?  What will source list do for me ?   Wouldn't having info record be sufficient ?
         Looking forward to hear your suggestions.
    Thank you.
    Joyce

    Hi Joyce,
    If you have not maintained valid conditions in your Pur info record then price is picked from last purchase order through purchase order price history if customizing settings allow so (In your case if customizing settings allow and the net price 100 in the info record is not from valid conditions, price picked will be 250).
    In the price determination process in PO system always first looks for pur info records with valid conditions if not found then it looks for last PO price.
    There is also a parameter for default values for buyers called EVO. If you make settings in customizing for this parameter and tick the Chkbox for picking the last purchase order price in it and you attach this parameter to your user ID in the user-own data with PI value, then last PO price is picked as default value in the net price.
    You can refer the following link
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee130655c811d189900000e8322d00/frameset.htm
    Source List -
    The source list is used in the administration of sources of supply. It specifies the allowed (and disallowed) sources of a material for a certain plant within a predefined period. Each source is defined by means of a source list record.
    The source list serves:
    To define a source of supply as "fixed". Such sources count as preferred sources over a certain period of time.(For example, the fixed vendor for material 1 is X for the first quarter and Yfor the second quarter of the year.)
    To define a source of supply as "blocked".(This means, for example, that contract 123 may not be used for a certain period of time.)
    As an aid in selecting the preferred source during the source determination process.(For example, the vendor A is determined as the source for an item of a requisition dated 15th June relating to material 1.)
    To block the external procurement of a material
    Regards,
    Rahul.

  • Error in Source list creation

    Hi,
    When i am trying to create a Source list for the material with vendor in the given Pruchase organisation,
    i am gettign an error "Vendor does not have purchasing data" .
    Pls suggest me what i do to avoid this error and create source list
    Thanks

    HI,
    Maintain purchasing data for that vendor in MK01
    eg terms of payment,
    schema group
    check - GR based IV
    Order currency
    service based IV
    Shipping conditions
    Planned delivery time etc
    Regards,
    Uzair
    Edited by: Mohd Uzair Hussain on Jun 27, 2009 3:11 PM

  • Can not create source inspection to to material with mpn optional

    HELLO,
    Our materials are divided to two groups:
    1. materials that their manufacturer part profile is mandatory (mark : 'MPN MANDATORY" CHANGE IN MPN and QM PROCESSING FOR MPN)
    2. materials that their manufacturer part profile is optional (mark: CHANGE I MPN).
    We use source inspection to all materials .
    No problem create source inspection to the first group (mandatory mpn) I created q-infor-ecord to vendor vs mpn-material, in the purchase order header the mpn material is added and by using trns qi07 I get source inspection lot with our firm material
    The problem is that I can not create a source inspection to material that was defined as mpn optional and in the purchase order header the mpn-material is filled.
    regards in advance
    Eyal rosenfeld

    HELLO,
    Our materials are divided to two groups:
    1. materials that their manufacturer part profile is mandatory (mark : 'MPN MANDATORY" CHANGE IN MPN and QM PROCESSING FOR MPN)
    2. materials that their manufacturer part profile is optional (mark: CHANGE I MPN).
    We use source inspection to all materials .
    No problem create source inspection to the first group (mandatory mpn) I created q-infor-ecord to vendor vs mpn-material, in the purchase order header the mpn material is added and by using trns qi07 I get source inspection lot with our firm material
    The problem is that I can not create a source inspection to material that was defined as mpn optional and in the purchase order header the mpn-material is filled.
    regards in advance
    Eyal rosenfeld

Maybe you are looking for