Problem cycling through elements of an array using a for loop ~ error 200609?

Hi,
I'm outputting a 194-element array from a MATLAB script node into a for loop where the array is indexed then converted into a 8-bit boolean pattern which I'm trying to output using DAQ Assistant. I'm using LabVIEW 8.2 and a PCI 6133 DAQ using a counter(Ctr0InternalOutput) to time the output. The first element of the array goes through the loop perfectly however never makes it's way back through and throws error 200609: Generation cannot be started because the slescted buffer size is too small. Increase the buffer size. After probing the line before DAQ Assistant I confirmed only one element makes it through the loop and then throws this error? I've trying doing the same things with lower lowel DAQmx vi's using a DAQmx configure output buffer vi to override this buffer size problem, but still get the same result(not the error but same data flow problem)? Anybody know what's going on? I've included the vi's I've been working with. Thanks!
Millie
Attachments:
Untitled 22.vi ‏228 KB
Untitled 34.vi ‏180 KB

Similar Messages

Iterating through every other (or specified number) of element in an array using a for loop

I am trying to go through an array but instead of autoindexing I want to skip every other element or maybe a number of elements that will be specified for the user.
Basic functionality that I want to acheive is the following in C code.
int temp_var = 10;
int i=0;
for(i=0; i<=1000; i=i+temp_var)
I am very new to LabVIEW and I did not know how to use internal variables.
Can this be acheived using shift registers?
I am attaching the code I currently have for this. Let me know what you think.
Thanks guys.
Solved!
Go to Solution.
Attachments:
24_Sep_NchanNSamp.vi ‏44 KB

tbob wrote:
I have been asking for a new For Loop style that would allow us to specify start, stop, and step conditions, but it seems that many people are just not for this idea. Don't know why?
See here.
I wouldn't say there aren't many people for it. The idea you linked to was one of a half dozen of basically duplicate ideas, including another one of your own.
These two ideas have a fairly large number of kudoes showing people want the idea.
Smart Iterators with Loops
For Loop Increment

Transposing data in an array using a For Loop

I am trying to transpose some data in an array using a for loop starting from the size of the array then decrement down to 0. Can someone please help if you have an example?
Solved!
Go to Solution.

I feel as if reverse 1D array may help
Edit: misunderstood what your second post meant.
CLA, LabVIEW Versions 2010-2013

Weird problem with loading data from an XML using a for loop

Hi,
I have a strange problem. I have encountered this thing many a times but still don't know the proper workaround for it.
I am trying to load swf file, a video file or an image. They can be present on a local system or on a remote server also. All the entries corresponding to the files to be loaded is made in an XML file. I traverse through the nodes of the XML using a for loop. On the complete event of loader info, example:.
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
I fill a container with the loaded data.
My problem is when I am using for loop it doesn't works properly but if i use a statement like this:
someFunc()
     if(i<arr.length())
     ... do something...
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
private function onComplete(e:Event):void
... do something...
i++;
All files are loaded properly.
I think this can be because the for loop processes pretty fast but the content takes time to load, which ultimately leads to some wierd results.
Please let me know how can this thing be done correctly by using a for loop also.

You don't want to use a for loop to load several items. The way you almost appear to have it is the proper approach... load a file and use the completion of its loading to trigger loading the next file.

I'm creating an array using a for loop, how do I get the values outside the loop while it is running? thanks

I'm creating a set of values using a for loop and a shift register inside the loop. I want access to these values outside the loop as they are being created inside. When I connect a wire from the shift register to a display outside, it doesn't work. How do I do this? Thank you.
Attachments:
tamko_new.vi ‏29 KB

I tried to create the local variable that was wired to numeric indicator inside the loop. If I try to connect this to the analog output outside the loop, the loop just starts blinking and nothing happens, am I doing something wrong? Thanks again.
Attachments:
tamko_new2.vi ‏29 KB

Using a For loop to call one array element at a time

I have been working on a VI that reads a GPS unit, parses the data, outputs what I need, compares the actual GPS location to the desired location, determines a desired heading and moves on from there. My question pertains to the number of desired locations I can input right now. I need to be able to input a predtermined number of locations (not just the one that I can input right now). I was told that it is possible to use a For Loop with an array and have the first set of Lat and Long values run through the VI and when everything is complete that the next set of values will be chosen. Does this mean that I need to put the entire VI inside a For Loop and have the array update as soon as the VI has completed its first mission? I understand the concept of how this work from other programming languages but I'm not sure how to implement the solution in LabVIEW. Any help would be appreciated.
Adam

adamoutlaw wrote:
Here is a portion of the VI. I need two separate arrays, one for Latitude and one for Longitude, of the same size.
I don't see any arrays in your code. Do you want to generate arrays form individual data points or do you want to process arrays, one element at a time? Both can take advantage of autoindexing. Here's a simple picture.
Your VI contains a weird mix of DBL and EXT precision. Most likely all you need is DBL. Keep your representations consistent!
Message Edited by altenbach on 08-02-2007 07:14 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Indexing.png ‏4 KB

Using a For Loop Index for Array Element Number?

Hi. Thanks in advance for the help. I can't seem to find what I want to do here using the search function... probably because I don't know how to frame the question appropriately. Ignore the title to this post cause it's probably wrong vocabulary for what I want to do.
Here's the situation:
I have a 2D array where the first column is the X data and each subsequent column is Y data (call it Y1...Yn). The n-value varies from run to run (some runs have 4 columns of data, some have 20), but that is easily gathered when reading the data file. I need to perform a number of operations on each set of data, the least of which is smoothing the data and graphing it, so I'm limiting my discussion to these 2 operations.
What I want is a for loop structure where the indexing of the loop tracks the Y1...Yn columns, grabs each column for the iteration, performs the relevant analysis, and spits out the result, but in a stackable manner. Thus the title; I want to use the for loop's index to mark the array element for building a new array.
See the image attached. A 2D array of 9 columns (X, Y1...Y8) is analyzed such that each data set, (X, Y1), (X, Y2)...(X, Y8) is bundled, graphed, run through a B-spline Fit, of which is also graphed. I need to replace this with something that looks like the for loop structure shown.
I just don't know how to get those two data bundles [(X, Yi) and it's smoothed pair] out of the for loop in a stacked set from every iteration of the for loop.
Again the title, I think I want to build a new array where i use the index of the for loop to control the entries of the new array. But I can't see how to do that.
Any help would be appreciated.
Attachments:
NeedForLoopForThis.PNG ‏30 KB

Hello H.R. Dunham, and welcome to the forum!
It seems that you may be looking for Auto-Indexing, a basic feature of loops in LabVIEW. You'll need to transpose your array before wiring it into the for loop, as elements are auto-indexed by row before column, but at that point you should be able to operate on each column and output an array of n cluster elements corresponding to your input columns. Auto-indexing tunnels look like brackets to indicate each element will be indexed automatically- this should be the default when wiring an array into a for loop or when wiring anything out of a for loop.
As for how to build your pairs, I suggest removing the X column and creating a "starter" cluster containing your X data and placeholder Y data before entering your "Y" processing loop. Use the bundle by name function in the for loop to insert your processed column data into the cluster and auto-index the cluster output. Flow would be something like this:
1) Gather data
2) Split X and Y using standard array operations
3) Create "template" cluster with shared X data
4) Pass template cluster and Y-column array into an auto-indexed for loop.
5) Insert processed Y data into cluster inside loop.
6) Auto-index cluster data out of loop.
This tutorial is probably also a good place to get started:
Getting Started with NI LabVIEW Module 3: Loops
http://www.ni.com/white-paper/7528/en/
Hope that helps!
Regards,
Tom L.

Creating an array in a 'for' loop (resetting loop count)

Hi,
I am trying to integrate an acceleration signal coming from a CRIO analogue input to obtain the speed and then further integrate to get the displacement of a vibration system.
I understand that in order to perform the integration, an array has to be fed in. My problem is that I could not buffer the signal in a buffer block as I couldn't find any buffer blocks. so I decided to create my an array of data using a 'for' loop. The 'for' loop nests inside a timed loop. The problem that I got stuck at is how to reset the 'for' loop in order to refill the buffer again at every iteration of the outer timed loop.
I have attached the code if that helps. Note that I am using labview 2013.
I would be gratefull if someone who had encountered a similar issue before can help me.
Regards
Ali
Solved!
Go to Solution.
Attachments:
acc_test.vi ‏42 KB

Dear Altenbach,
Many thanks for your reply.
I need to make it clear that I have not had enough hands-on with labview, I have only used it for sometime in the past and now I have to in order to perform some active damping on a 50Hz running machine. I must stress the fact that what i find more intuitive to do in a different programming language (matlab or C) is not as straightforward in labview. so please bear with me if my code has basic mistakes .
All what i am trying to do is obtain the speed and position from an acclerometer signal. unfortunately i dont have a position sensor so i have to measure acceleration then perform time integrations in order to obtain the speed and position respectively. I am using a compact Rio (later in FPGA mode) to take physical measurements of acceleration from the vibratory machine and where i managed to do this bit successfully. when it came to performing the integration, i had to create an array inside my timed loop since i couldn't find a buffer block. I implemented a 'for' loop inside a timed loop in order to build the array. however i got stuck at resetting the count of the 'for' loop in order to refill the array with new values at every new iteration of the outer timed loop. unfortunately, even a sensible answer has been suggested before, i dont seem to have been capable of doing it yet. I really spent all my day trying to figure a way out but not achieved it yet, nevertheless I have learnt many many things by playing around.
I would be gratefull if you could comment on a possible way of doing what i am trying to do.
Kind Regards
Ali

Truncating an array within a for loop

I'm currently working with a program that builds an array of 3000*N real numbers, where N is a control that I specify. I want to pass this array into a for loop that runs N times, each time splitting the first 3000 numbers of the array. So, in other words I want the for loop to execute enough times such that the initial array will be completely divided into groups of 3000 when I'm finished. Later I'll be finding the maximum value of all of these subarrays and taking the average of those. What I tried first is to pass the array into the for loop, then truncate it at index = 3000, but the problem is that I can't hard code the loop to do this N times. Any advice or other methods you'd recommend for doing this?
Thanks.
Message Edited by Robtn on 03-05-2010 03:17 PM

Mark--I don't think I can use that approach. Let me be more specific on what the problem is:
Our "big program" is a giant while loop that constantly reads in voltage values from a DAQ assistant.
It has two modes, the first of which I'm having a lot of trouble with. This mode uses a for loop (N = 3000) nested within the giant while loop.
When the for loop activates, the DAQ assistant takes reads 300 samples for every iteration and takes the maximum of those 300 values. It then builds an array composed of all the maxima. After the for loop has executed 3000 times, a case structure activates, which then finds the maximum of the array of maxima.
I want this (N=3000) for loop to execute an arbitrary number of times, a number that I will specify. Each of those times it should generate a completely seperate array of maxima. So, if I want the for loop to run 5 times, I want 5 different arrays.
My approach for doing this was to change N=3000 to say N = 15000, then split up the resulting array 5 times. So, I need an entirely separate for loop that reads in this array of 15000 maxima on its own and splits it 5 ways. I think what you're suggesting is to use a for loop outside of the N=3000 loop, which is a good idea in theory, but experience has shown that this will not generate 5 separate arrays. It will actually concatenate each array into one, hence the problem we currently have.
Yik--I won't have access to Labview over the weekend. Is it possible to take a screenshot and post it, or maybe a short description?
Thank you for the responses.

Row operation on array with a For Loop

Hi,
I'm working with a large one dimensional column array. I'm trying to do the following
for i=1:size(A)/2
B(i,: ) =A(1+(i-1)*2:i*2)
So, for example if
A=
0
1
2
3
4
5
6
7
then
B=
0 1
2 3
4 5
6 7
My approach was to use an array subset block inside the for loop to select a number of elements but I'm not sure how to transpose the selected elements into a new row to create the new array B. Is there a more straightforward approach?
Thanks,
Mike
Solved!
Go to Solution.

try experimenting with the reshape array feeding it your input array and re-sizing it to output a 2d aray. It is much faster than using a For loop becuase the data never gets moved and LV just changes the array dimensions and updates the stride.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to create a small field that cycles through a series of images. (using Acrobat Pro)

Using Acrobat Pro, we need to use a small field to track student progress. With successive mouse clicks, the field would cycle through:
-- a number (that identifies an element of study),
-- same number surrounded by a circle (indicates element is assigned to the student),
-- same number with a check mark (indicates element was completed by the student),
-- back to the original number.
This could probably be handled by cycling through a series of small images when the user clicks on the field.
The "Check Box" field allows only a check to be added to the field. It does not allow the circle and does not cycle through multiple states.
The "Text Box" field might allow this capability, but if so we are not able to configure it properly.
Any solutions?   Thanks!

Thanks Michael,
The information at the link you provided enabled us to create a button that cycles through a series of ASCII characters.
This us useful, but we need to cycle through a series of images. A more difficult problem.
FYI, an example of the javascript that cycles through a series of ASCII characters is shown below. (The "else" statement pertaining to a null "" buttonGetCaption state is used to initiate an initial state of "1" for the button when the form is first opened.).
if
(event.target.buttonGetCaption()=="1"+"\u2714") {
    event.target.buttonSetCaption("1");
    event.target.textColor = color.black; }
else if (event.target.buttonGetCaption()=="") {
    event.target.buttonSetCaption("1");
    event.target.textColor = color.black; }
else if (event.target.buttonGetCaption()=="1P") {
    event.target.buttonSetCaption("1"+"\u2714");
    event.target.textColor = color.green; }
else if (event.target.buttonGetCaption()=="1") {
    event.target.buttonSetCaption("1P");
    event.target.textColor = color.red; }
loop
Again, we are still looking for a way to cycle through a series of images so any help with that problem would be appreciated.

Can we change the property of each element of an array using property node or by other methods?

Hello all,
Can we change the property of the elements of an array. For example:
I have an array of combo-boxes. Can i have such a scenario that different combo-boxes of the array will have different items to select an item.
I am able to set the different "values" in different combo-boxes bu using "to be more specific class" property node.
But i could not set the different item list in different combo-boxes.
Please give me the solution.

Thanks a million dave!!!!!
I have learnt a very new and innovative thing...
I just wanna ask you one more question in the above context.
Can i have listbox or combo-box in a table just like in an excel sheet where we can have listbox by using "data validation" property for different cells having different list.Can i have this in labview. Because for this i have to super-impose the combo-boxes on the table and treat them separately.
We have to take those combo-box values and put in table and then store it.I have attached one VI to show the scenario.
And this is the alternative solution of the array problem which u have already given. So please suggest me between the two or any alternative solution.
Thanks,
Ankit Madaan
Attachments:
Recording _Table.vi ‏19 KB

I have used a 'for loop' to create an array of output data, however I want the each of the data sets from the array to be placed into a 1-D array. How do I concatenate the output of the for loop into a 1-D array?

I am using this to create a data set that will be passed as an anolog output therefore it needs to have the correct array dimensions to go into the analog write vi.

I'm updating my request... I've figured out how to do this by copying an example that uses a simple FOR loop (as seen in the attached current version of my VI). My question now becomes this: Is there a way to save the Y values corresponding to those X values into two more arrays? That is, just for argument's sake, let's say I took the first 100 elements from the X array, and found them to be positive. Then I would like to take the first 100 elements of the Y array and put them into a 'Y Values for X > 0' array. ...And likewise with the negative X values, they should have a separate array of corresponding 'Y values for X < 0' array.
I can see that I should somehow save the indices of the positive X values from the large arrray wh
en I sort them out, and use those indices to pick out the elements from the main Y array with the same indices.
I just can't seem to set up the code necessary to do this. ...Can anyone help, please?
Attachments:
Poling_Data_Reader_5i.vi ‏79 KB
30BLEND.txt ‏3 KB

Is it possible to use a "for loop" structure to represent DAQ of 16 channels?

Hi,
I tried to search but I failed to find a similar problem so I am posting this problem here.
I have a temperature DAQ board which has 16 channels, and I am using all 16 channels to record and monitor temperature data.
When I writed blocks for all 16 channels, a mess was created (as you can see in my attached program). I have noticed that all the VIs for the 16 channels have similar structure, so I was thinking whether we can represent all 16 channels with a "for loop" strucutre with a pointer i scanning from i=1 to 16 as we usually do in Matlab or Fortran.
For instance, we may try to simplify the code like:
for i=1:1:16
acquire data from channel i
show data from channel i in X-Y graph
write data from channel i to excel in every 10 seconds
end
I could not do it myself because I cannot find a "pointer" to represent each channel.
Does anyone know how to do this in LabVIEW? Thank you.
It is said that it is best if we can put all of our code within the screen of a monitor we use by using subVIs to divide the code into many subroutines. But I found it quite difficult to do so as I have too many controls as inputs and indicators as outputs. Also, I use property node to read and write frequently, which make things harder....
Attached code does not work as it requires the 9213 hardware, and for simplicity I deleted irrelavent modules. But if you need I can upload one that may work by modifying the read VI.
Thank you.
Attachments:
ask for help.vi ‏132 KB

Yup, instead of all these 1D arrays, use a single 2D array. Your code could be reduce to <10% of the current size. I am sure it would fit easily on a single screen.
Also try to do some tutorial or take some courses. I realy don't think you are ready to tackle a system of this magnitude at this time.
Your code is just peppered with very poor choices. Some things you apparently haven't figured out:
index array is resizable. There is no need to create dozens of parallel instances, all wired to the same array and all with a unique index diagram constant. If you want all elements in order, the indices don't need to be wired at all.
Replace all your value property nodes with local variables. Much more efficient. Then redesign the code so you don't even need most of the local variables.
You can use built array to append elements to an existing array. Using "insert into array" is much more complicated an error prone.
It is not a good idea to have deeply stacked while loops with the innermost loop having long delays and indeterminate stop conditions. That just gums up the gears.
Learn about proper code architectures, state machines, etc.
Get rid of that gigantic, all encompassing stacked sequence. I am sure you can find a better way to reset three booleans when the code is about to stop. In fact it is typically more reasonable to set things to a defined state when the program starts to avoid problems due to accidental value changes at edit time.
Don't use hidden control/indicators as data storage and interloop communication via local variables. There are better ways.
You can wire the reminder or Q&R directly to a case structure. No need for e.g. "=0".
Don't use ambiguous labels, e.g.a boolean labeled "Dampers on or off". Nobody will be able to later figure out if TRUE corresponds to ON or OFF. Could it be that TRUE mean it is either ON or OFF and FALSE that it is in some imternediate position?
LabVIEW Champion . Do more with less code and in less time .

How to output last 4 arrays from a For Loop?

Hi People,
I am almost at the end of my tether. I really hope someone could please help me.
Any input would be welcome. VI attached.
VI explanation:
I initialize an array.
The random number generator simulates my camera input.
Depending on which iteration it is, the data is added into one of four output arrays.
'x-y*floor(x/y)' gives a remainder value of 0, 1, 2 or 3.
'Case Selector' just adds 1 to 'x-y*floor(x/y)' to get case 1, 2, 3 or 4.
Shots 1, 5, 9 etc are added to Array 1 (Case 1).
Shots 2, 6, 10 etc are added to Array 2 (Case 2).
Shots 3, 7, 11 etc are added to Array 3 (Case 3).
Shots 4, 8, 12 etc are added to Array 4 (Case 4).
Averaged Output displays the averaged value i.e. the total value divided by the number of shots saved in that array ('Set (IQ+1)').
My problems are:
1) I would like to output only the last 4 sets of data from the Averaged Output 1, 2, 3 and 4 to 4 different files (i.e. save as .csv what is displayed onscreen in indicators 'Averaged Output 1', 2, 3 and 4 at the end of all iterations.
Where should I place my file save diagram disable so that it does this?
Putting it outside the main For Loop with auto-indexing on gives me one file with all previous data. (This is not feasible as my number of shots should number in the thousands)
Putting it outside the main For Loop with auto-indexing off gives me only the last set of data. (I need the output for 4 Arrays, not just the last run)
Putting it inside the main For Loop (as shown) gives me the same number of files as number of iterations. (Again not feasible due to large number of files that will be generated and slow camera capture)
For the sake of fast camera capture, I would like these 4 files to only output once all the image captures are complete.
2) Would preferably like to name the file once and for the programme to append '(1)', '(2)', '(3)' and '(4)' to filename of the appropriate 'Averaged Output' Arrays but file path controls are another big headache for me.
3) P.s. is initializing one array enough to avoid using Memory Manager? Or should I initialize 4 arrays?
I am using Labview 2010.
Thanks so much,
Jaslyn
Solved!
Go to Solution.
Attachments:
Help Understanding Arrays and file paths (10).vi ‏26 KB

Thanks so much Lennard!!
Hi JKSH,
I've been busy trying to complete the dang code, but for completeness so that other users can learn too, I shall answer your queries. Thanks for looking in.
First, what do you mean by "add"? Your code in your case strcuture sums your input values, so your array size doesn't change. However, you also said "Putting it outside the main For Loop with auto-indexing on gives me one file with all previous data. (This is not feasible as my number of shots should number in the thousands)" -- it sounds like you are expecting an array with thousands of elements. So, what should "Output Array N" look like?
Ans: Output Array N should be a 4x4 array of the summation of all the numbers generated during every 4th iteration.
i.e. if random number 1=1, random number 2=2, etc, And 'No of iterations' is 12,
Output Array 1 should be 1+5+9:
15 15 15 15
15 15 15 15
15 15 15 15
15 15 15 15
(Note: Most of your arrays are 4x4, but in Case #2 you created 128x128. I prersume this is a typo?)
Ans: Kind of, I'm using a 4x4 array of randomly generated numbers as an example but my actual data will be the 128x128 pixel output of a camera. And during actual experimentation, 'No of Iterations' will number in the thousands.
Second, why do you add your "simulated camera input" to the "Initialized Array"? You can add it direcly to the previous output inside your case structure.
Ans: See answer to question 3
Third, have a look at shift registers: http://www.ni.com/gettingstarted/labviewbasics/shiftregisters.htm. Use them instead of Feedback Nodes to make your code tidier.
Ans: I did try.. But I can't seem to add shift registers to the case structure, only the for loops outside. Are you sure it can be done..?
jaslyn wrote:
1) I would like to output only the last 4 sets of data from the Averaged Output 1, 2, 3 and 4 to 4 different files (i.e. save as .csv what is displayed onscreen in indicators 'Averaged Output 1', 2, 3 and 4 at the end of all iterations.
Where should I place my file save diagram disable so that it does this?
For the sake of fast camera capture, I would like these 4 files to only output once all the image captures are complete.
You will need to call "Write to Text File.vi" 4 times to write 4 files. So, you should finish your loop, then call this VI 4 times.
Ans: How do I get it to extract the data from each of the 4 cases in my case structure?
jaslyn wrote:
2) Would preferably like to name the file once and for the programme to append '(1)', '(2)', '(3)' and '(4)' to filename of the appropriate 'Averaged Output' Arrays but file path controls are another big headache for me.
You can create strings first, then convert them into paths: http://zone.ni.com/reference/en-XX/help/371361G-01/glang/string_to_path/
Thanks
jaslyn wrote:
3) P.s. is initializing one array enough to avoid using Memory Manager? Or should I initialize 4 arrays?
I'm not sure what you're asking; can you please clarify what you mean by "avoid using Memory Manager"? But anyway, you've actually initialized FIVE arrays: 1 outside the loop, and 1 inside each case.
I've read that to avoid fluctuations in memory usage, it is a good idea to initialize arrays to their expected size before the start of data collection. That was just what I was trying to do.

Problem cycling through elements of an array using a for loop ~ error 200609?

Similar Messages

Maybe you are looking for