Problem during implementation of log4j in portal
Hi,
I am quite new to portal. I am trying to customize the com.sap.portal.runtime.logon.par file. Everything is perfect. But while I am trying to incorporate my own logging using log4j, the log file is not getting generated. Can you please suggest me how can I incorporate log4j in this par file and generate my own log file in my desired location?
Hi,
Visit this link (using Log4j )
Use Log4j in J2EE Project
Look at how to config and use log4j and a sample application
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36085e78-0801-0010-678d-8b4e89ddff3c
check for the same problem of your
Log4j setup in WEB AS
Hope that helps
Similar Messages
-
Problems during implementation........
Can anyone please send me some problems faced during implementation at the five stages interacting with the client?Please send me to my mail [email protected]
The major problem during implementation is gaps in AS-IS Study. If we do not study the peocess to the minute bit, then we tend to miss out critical requirement & this is realized during testing. Then the redo takes a longer time, compared to doing it correct initially. Ofcourse, Things will not be correct in first attempt, but if the number of things to redo is leasser, it becomes more convienent, as during testing phase, we are already overloaded with many activities to be taken care of.
We should be very clear what is not possible in SAP or even if possible with development, but the particular development is not in scope of project, we require to say a clear NO to it.
It is difficult to pin point the problems. If I share one of my experience, one of my project was fot service industry & the basic scenarios were periodic billing, mile stone billing & resource related billing & all three I had no prior experience. I had clue of Milestone & Periodic, but no clue of resouce related billing. I had to stuggle hard to get the scenario configured & configuring to the requirement of client. But finally I could do it successfully.
Regards,
Rajesh Banka
Reward suitable points. -
Problem during implementation of SP5 in PI 7.1 EHP 1
Hi,
we try to implement SP5 in our new installt PI System (7.1 EHP1) with the JSPM. The validation phase aborts and in the JSPM_MAIN_1_01.LOG there is the following enty:
Aug 16, 2010 9:59:28 AM [Error]: Validation finished with error. See log /usr/sap/PIE/DVEBMGS32/j2ee/JSPM/log/log_2010_08_16_09_43_22/deploy_2010-08-16_09-58-49.log for details.
Aug 16, 2010 9:59:28 AM [Warning]: Undeployment of component sap.com/com.sap.aii.ibrep.deployservice is rejected because undeployment of other component it depends on is rejected; detailed message is $(2)
Aug 16, 2010 9:59:28 AM [Error]: Detailed message: The item is skipped as there are items which depend on it. The items which depend on are: (name: 'com.sap.xi.repository', vendor: 'sap.com')
In the second lof-file mentioned, there are no further description concerning the error (there only "infos").
Any ideas?
Regards
UlrikeHi Ulrike,
in PI 7.11 there is a dependency between SAPXIESR and SAPXIGUI ,
ie., see
[1335523 FAQ: Deployment PI Patches in Release 7.1 and higher|http://service.sap.com/sap/support/notes/1335523 ]
Regards
Kenny -
Problem during implementing SAP note manually
HI
I am implementing a note manually, which have instruction like below
Manual Pre-Implement.
VALID FOR
Software Component SCMSNC Supply Network...
Release 700 Until SAPK-70006INSCMSNC
Release 701 Until SAPK-70101INSCMSNC
o Open BAdI /SCF/CSV_SETTINGS in SE18
- Add the following 2 methods to interface /SCF/IF_EX_CSV_SETTINGS:
CHANGE_INPUT_ENCODING
CHANGE_OUTPUT_ENCODING
But when I go till point I can able to add the method as it is grayed out
Is there any reason or different way of implementing the note manually?
Regards
DevTo implement note manually you need to get the access key. Once you give the access key you can apply the note corrections.
-
What problems faced during implementation BW projects few eg: Please
Hi BWers,
Please, can you give me some examples regarding
" what problems you faced during implementation of BW projects.
Thanks
points will be given with big heart.
Again Thanks
Regards
Mubeen.Hi,
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Details on the Implementation Phase
http://help.sap.com/saphelp_nw04/helpdata/en/2c/36177e645911d395fe00a0c94260a5/frameset.htm
Hope this helps.
Thanks,
JituK -
Problem during hierarchy load from ECC 6.0 to BW
Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM -
Hi experts,
I have a problem during go-live related to posting to co-pa
I have scheduling agreement. I don't want to post it in co-pa.
I excluded my code for this order type (E), but when the user goes to create the scheduled lines, SAP posts to co-pa the document.
I already implemented UE ZXKKEU11 and ZXKKEU03... I don't know if others must be implemented...
Help me if possible urgently.
Thanks.Thanks Sridhar for your reply.
Only first note you mentioned could be help me. The others aren't related to my release. (ECC 6.03).
According to you, why clearing co-pa structure (when data must not be posted) SAP posts however the scheduling agreement record? -
Problems with activity reports on Enterprise Portal
Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then? -
Hi all,
I am experiencing a strange problem during login. I have installed a portal application
( very similar to the example stockportal application) , but when I attempt to
login , I get redirected to the portal main page, and the login button is still
visible.
The strange part is that every once in a while, the login will work correctly,
and I see new skins, templates etc. I have looked at some previous postings here
which suggest the problem lies with the cookie path setting in the weblogic.xml
file. I have made sure that is set properly ( to the name of the portal app) ,
but the problem persists.
Any help will me much appreciated..
thanks.
VicHi Vic,
Sounds like you are losing your session (I guess that's pretty obvious =)).
What is your cookie domain set to (in weblogic.xml)? If it has a setting (for
example, ".beasys.com"), it must match your domain and you must include the domain
in the url you request in your browser. For example, if your server name is "myserver"
and your domain is ".mycompany.com" you must request "http://myserver.mycompany.com:<port-number>".
Using "http://myserver:<port-number>" won't work. The browser uses both the
cookie domain and the cookie path to decide whether to send the cookie with a
particular request. You can also experiment with commenting out the cookie domain.
Are you using a proxy server? There can be issues getting proxies configured
correctly.
Have you tried getting your browser to prompt you to accept session cookies?
Short of a sniffer this is an excellent way to see what the server is sending
to your client. You can verify that the cookie name, path, and domain are correct
and are getting sent to your browser when you expect them to be.
If you are familiar with a sniffer you can use it to see that the requests and
responses and see what is happening with the cookies. I really like Ethereal
(www.ethereal.com).
Are you seeing the cookie name in the urls generated by webflow more than once
per session? That would indicate that the browser is not sending the cookie back
to the server and indicate a configuration error.
What browser are you using?
If you can't get it to work, can you attach your web.xml and weblogic.xml?
-John Bimson
Software Engineer
BEA Systems
"vic siddiqi" <[email protected]> wrote:
>
Hi all,
I am experiencing a strange problem during login. I have installed a
portal application
( very similar to the example stockportal application) , but when I attempt
to
login , I get redirected to the portal main page, and the login button
is still
visible.
The strange part is that every once in a while, the login will work correctly,
and I see new skins, templates etc. I have looked at some previous postings
here
which suggest the problem lies with the cookie path setting in the weblogic.xml
file. I have made sure that is set properly ( to the name of the portal
app) ,
but the problem persists.
Any help will me much appreciated..
thanks.
Vic -
We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your helpHello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem During Installation of ECC 6 on Windows 2003
<b><b>Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
</b></b> <b></b>run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich -
How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
ThanksIcapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced. -
I face a problem while making a confirmation on portal.
Hello ,
Can anyone help me I am facing a problem while making confirmation in the portal.
the system pops up an error as mentioned below. Please help
Folgender Fehlertext wurde im System SRP prozessiert: Speicherungsform der Produkt-ID ist im Customizing noch nicht definiert
Der Fehler trat auf dem Applikationsserver eccprd-srp_SRP_50 und im Workprozess 3 auf.
Die Abbruchart war: TH_RES_FREE
Die ABAP-Aufrufhierarchie war:
Form: READ_SETTINGS of program SAPLCOM_PR_CONVERSION
Function: CONVERSION_EXIT_PRID1_INPUT of program SAPLCOM_PR_CONVERSION
Function: BBP_PDH_PRODUCT_READ_BUFFER of program SAPLBBP_PDH
Form: GET_LOCAL_PRODUCT of program SAPLBBP_ECI
Form: APPLY_OLD_MAPPING of program SAPLBBP_ECI
Function: BBP_PRODUCT_MAP of program SAPLBBP_ECI
Function: B31I_PO_GETDETAIL of program SAPLBBP_BD_DRIVER_31I
Function: META_PO_GETDETAIL of program SAPLBBP_BD_META_BAPIS
Function: BBP_BE_PO_GETHISTORY of program SAPLBBP_PDH_HISTORY
Function: BBP_PDH_SEARCH_PO_SUBLIST of program SAPLBBP_PDH_SEARCH
Best Regards,
SairamHi,
Pls see if the foll notes are useful.
<b>Note 911217 - Copy vendor product number from contract search help to PO</b>
1047769 - No returns for search by Product ID in Monitor Shopping Cart
Note 1023012 - BBPSC: Long product ID triggers short dump
BR,
Disha.
Pls reward points for useful answers. -
A problem while implementing a file to file senario
hi all :
There is some problem while implement a file to file senario. the file couldn't be sent or recieved.
and as I try to check Check the Sender File Adapter Status via
Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring ,
It is found that Adapter Engine has error status with red light. Is it why the file couldn't be sent?
Could you please tell me how to make Adapter Engine available?
Thank you very much!!!Hi Sony
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EC1.SystemHome.cnbjw3501 found
No access to get JPR configuration
Along with what experts suggested
What is the type of Business system is this. Standalone Java?
JPR can have problem if you have a business system thats not ABAP/Java type if this system is not having a SAP TS in landscape then create Java type.
Thanks
Gaurav -
Problem during creation of shipment document and shipment cost document
Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar
Maybe you are looking for
-
JES Messaging Server 6.0 will not accept mail alternate address
JES Messaging Server 6.0 will not accept mail alternate address I have installed the Sun ONE Messaging server 6.0 as part of an evaluation of the Java Enterprise System. This was installed along with Directory Server 5.2 and Identity Server 6.1. Duri
-
Customer subscreen on the PO item detail tab ( ME_GUI_PO_CUST)
I use the BADI ME_GUI_PO_CUST added customer subscreen ( new TAB) on the PO item detail. if PO order type is NB , the TAB can show both me23n and me22n . if PO order type is UB , the TAB can show ME23N , but can't show ME22N . Please Help, th
-
Checking for Oracle Home incompatibilities ...
While installing oracle client 10.2.0.4. I came across this error. See below Checking the Components installed in Oracle Home Check complete. The overall result of this check is: Passed ================================================================
-
Whats wrong with my cover flow. All the art work after up date , goes complrtly wrong , Most of the songs com under differebt art work. WHY? I keep changing, But the still swap!
-
With the new ios7 upgrade I have noticed that some accessibility features are not as strong. In emails I am now unable to open attachments as although I can see them at the bottom of the email when I touch on them voice over reads the paragraph above