Problem entering the publishing Wizard

Hello,
I have two questions:
1) I installed "Business ObjectsEdgeSeries" but I am new to this. When trying to open the CMC web page will not open. my question is, do I have to raise some service so you can open the page of "CMC Management?
2) The operating system I have installed is "Windows Server 2003" and go to work on an Oracle database, I'm trying to open "Publishing Winzard" and some fields are: system, user name, password and authentication system, I have understood which is the server name and user name and password are the system, but to write it get an error:
"Unable to logon: Could not connect to server .... That please check the server name is correct and That the server is running"
Regards
Juan Felipe.

Try the following:
USername: Administrator
Password: <the password you set during the installation>
Authentication type: Enterprise
I would recommend to take a look at the follwoing guides:
http://help.sap.com/businessobject/product_guides/boebi31/en/SAPBusinessObjectsEdgeSeries_3.1_GettingStartedGuide_en.pdf
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
Regards,
Stratos

Similar Messages

  • Problems using smart publishing wizard

    Hi, i am having problems using smart publishing wizard.
    Basically i am publishing my entire sample project to new
    location to remote file location.
    Its starts publishing but after reaching about half way it
    sends error message
    " Publishing has been aborted. A sharing violation accessing
    ../../filename.cpd "
    Has anyone got this problems. please help me to resolve it.

    Hi there
    Perhaps try closing the project before you attempt to
    publish?
    From what I'm seeing here, you are publishing source files.
    Normally one is only worried about publishing WebHelp output files.
    Cheers... Rick

  • Product Registration Problem - "enter the correct serial number"

    Hi.
    Sorry for mirroring thread.
    Some time ago I bought at one of the international sites aukyjnych Adobe Photoshop CS5 Extended.
    The program installed without a problem, the license key that I need to provide during the installation enter correctly, but when I wanted to register the program on the Adobe website receives message "enter the correct serial number."
    Unfortunately, the answer from a local Support team already waiting more than two week, and I can not contact any other way.
    What can I do in this situation?
    (sorry for poor English)

    Hi Fotomini,
    Please refer to the below mentioned link as this may help:
    Re: Invalid serial number!!
    Regards,
    Gurleen

  • Problem with the importing wizard

    Hei,
    I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll.  (This would be a pain)
    How to deal with the handle or will wizard easy understand that?
    I am really looking for a painless solution  
    thanks for the help

    Can you post the header file for the DLL?
    Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

  • Problems with the Setup Wizard for WRT54GC

    Hi…
    I just bought a WRT54GC router and while trying to install it I had some problems.
    I opened the Setup Wizard on the CD to install the router.
    When I reach step 6 the internet connection is being checked with the following result: “Unable to detect the internet connection. Please check your cable connections”.
    I’ve checked all the cables and everything is okay – I’m also able to access the internet which shows me that all cables are correctly connected.
    So why do I get this message?
    What do I have to do?
    The problem is that I’m not able to continue the Setup Wizard further than step 6.
    Thanks!

    well..if you have an internet connection through the router and the CD setup shows “Unable to detect the internet connection. Please check your cable connections”. I would recommend you to neglect it....discard the CD and configure the router manually
    you can access the router from the wired computer using http://192.168.1.1 .. the default password is admin

  • Problem entering the Host Printer name in SPAD...

    Hi,
    I have problem configuring the printer in SPAD. In the access method, I am trying to add the TCP/IP address of the network printer instead of the printer UNC name. Is this the problem ?
    If yes then how do I get the UNS name of the printer attached to Windows NT system ?
    Regards,
    Rajesh.

    Hi Rajesh,
    Using IP address for the printer should  not be an issue. But still UNC name is preffered option. You can get this information for the administrators of the print server you are using.
    Please award points if you found the answers useful.
    Regards.
    Ruchit.

  • Problem with the cfg-wizard - Service Registry and SLD Client

    Hi,
    I try to complete the initial activity for configuring the Registering Services Registry instance in SLD (http:
    localhost:port\nwa\cfg-wizard)  but when i start the wizard i found this error:
    Error: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
    I don't know what is that error. Anyone can help us?
    regard.

    Hi ,
    I am facing an issue while running  SLD configuration wizard in SAp NW 7.3.
    Find the error message below.
    com.sap.sldserv.exception.SldServiceRuntimeException: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
    Can anyone guide on this issue.
    ~Viswanathan

  • I have a problem with the publishing (iweb)

    hi
    sorry if my english is not so good ....any way i hope you understand me !!
    i have the domain name and the host .. every thing is ok
    when i want to publish my website .. every thing going well.. and it seems to be publiushed
    but when i look to my web site it is the same OLD web site that i had before ..it is not chaged ..
    when i look through the (cyberdock) program ... all the files that i have published is in there... but when i look to the website it is the same old web site
    i do not konw what i do
    have you got any idea ??

    If you are using Cyberduck to upload your new site, then try deleting your old site first before uploading your new one.
    When using Cyberduck to upload, it is very easy to do this indeed.

  • Site published by WCF publishing wizard throws "Error in the application.."

    Hi, I'm running BizTalk 2013r2 and run into a problem with the publishing wizard.
    I have used the BizTalk WCF publish wizard, following the the steps:
    Metadata only endpoint (MEX), publish for receive location <I select existing WCF-BasicHttp receive location from my Biztalk app>
    Publish schemas as a WCF service
    Update the web service description tree view to give a single one-way web method
    Give a target namespace (currently using http://tempuri.org/)
    Enter location for website (http://localhost/BTS-Store6), select Overwrite existing location, Allow anonymous access
    Generated service summary is below:
    Summary of WCF service description
    <?xml version="1.0" encoding="utf-16"?>
    <WcfServiceDescription xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="BizTalkWcfService" TargetNamespace="http://tempuri.org/" xmlns="http://schemas.microsoft.com/BizTalk/2006/01/Adapter/Wcf/Publishing">
      <LocationSettings Location="http://localhost/BTS-Store6" Overwrite="true" AuthAnonymous="true" />
      <ApplicationSettings CreateReceiveLocations="false" ApplicationName="" />
      <AdapterSettings AdapterName="" />
      <MetadataSettings EnableMetadata="false" MetadataOnly="true" ReceiveLocationName="RcvStore6POS_WCF" />
      <WcfServices>
        <WcfService Name="OnRamp">
          <WcfOperations>
            <WcfOperation Name="POSTransaction" Flow="OneWay">
              <WcfMessages>
                <WcfMessage Name="Request" Direction="Input">
                  <WcfMessageType Category="XsdType" TypeName="BTS.GO.Store6.Schemas.BT.POSTranaction" AssemblyName="BTS.GO.Core.Store6.Schemas, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0a9764041befeb8b"
    AssemblyLocation="C:\Windows\Microsoft.Net\assembly\GAC_MSIL\BTS.GO.Core.Store6.Schemas\v4.0_1.0.0.0__0a9764041befeb8b\BTS.GO.Core.Store6.Schemas.dll" TargetNamespace="http://BTE.ESB.StoreInputModel.POSTransaction" RootName="POS"
    IsAnyType="false" IsEnvelope="false" />
                </WcfMessage>
              </WcfMessages>
            </WcfOperation>
          </WcfOperations>
        </WcfService>
      </WcfServices>
    </WcfServiceDescription>
    Problem is, after publish the site, I can browse to the .svc, and use WCF storm to consume the WSD - all is good. However, after leaving it for about 30 minutes - when I next try to access the service the following error is thrown:
    <<Eventxmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider
    Name="System.ServiceModel 4.0.0.0"/>
      <EventIDQualifiers="49154">3</EventID>
      <Level>2</Level>
      <Task>5</Task>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated
    SystemTime="2015-01-12T12:26:41.000000000Z"/>
      <EventRecordID>293995</EventRecordID>
      <Channel>Application</Channel>
      <Computer>xxx.xxx.local</Computer>
      <Security
    UserID="S-1-5-21-1638455640-2704731959-1606034848-1010"/>
      </System>
    <EventData>
      <Data>System.ServiceModel.Activation.HostedHttpRequestAsyncResult/11812267</Data>
      <Data>System.ServiceModel.ServiceActivationException: The service '/BTS-Store6/OnRamp.svc' cannot be activated due to an exception during compilation.
    The exception message is: Error in the application.. ---> System.ApplicationException: Error in the application. at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
    at Microsoft.BizTalk.Adapter.Wcf.Metadata.ConfigurationInfo.GetReceiveLocation(String receiveLocationName) at Microsoft.BizTalk.Adapter.Wcf.Metadata.MexServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result)</Data>
      <Data>w3wp</Data>
      <Data>21772</Data>
      </EventData>
      </Event>
    With an exception message as vague as "Error in the application.."
    I'm at a loss as to what may be causing this. I have tried this many times. Usually, but not always, after republishing the site from the wizard I am able to browse to the service. The later, with semmingly only elapsed time being a changing factor, it
    fails.
    Any ideas?

    Hi Rob,
    Coming to your error, it’s really strange. You can able to access/use your WCF service for a while and after sometime you get error. Few things which I would recheck are as follows:
    Make sure it’s not due to your active directory. I would check if there are any issue with AD after an elapsed period of time to valid my app pool credentials.
    In your Application-pool, under process model, try by increasing the “Idle Time-out (minutes)”. This time decides the amount of time worker process will remain idle before its shutdown.
    I personally never required to change it from default value-20 mins, but looking at your issue, it’s worth trying this.
    In your Application-pool, under CPU, Check the setting “Limit Action” to “KillW3WP”. Default is “NoAction”. “KillW3WP” setting potential could have impact like yours. If so change it to
    “NoAction”.
     When you create a WCF service using wizard, I expect to have default values; check any setting at IIS level is having an impact.
    Few things I would try:
    Create a separate App pool for this WCF service and check the impact
    Reapply the credentials of you app pool. Just simply go to the “Identity” section and reapply the same valid credentials. This could clear any cache related things to do
    with the credentials/AD validation.
    I understand you’re overwriting the service/virtual directory while creating the SCF service in Wizard. Try manually deleting the virtual directory folder and create the
    WCF server as fresh using Wizard, without using the overwrite checkbox.
    Hope the above suggest helps.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How can I overwrite existing reports with Publish Wizard?

    Hi,
    I uploaded a lot of reports to the Crystal Reports Server 2008 CMS using the Publish Wizard. Now, when I upload changed reports again, the Publish Wizard does not overwrite the existing reports. Instead it renames the new report as "<Name> (2)".
    Is there an option ot overwrite the existing report based on the report name, ideally keeping the CID?
    Thanks for information
    Joern

    Hi Jorn,
    There is no option to overwrite the destination content, if you want to do that a better tool would be the Import Wizard.
    Using the Import Wizard you could specify how you want the imported report being to be treated in instances where it exists also on the Destination system.
    From the Import Wizard Guide:
    "...you have two options to identify the object and determine if the object already exists on the destination environment:
    1. Use the source object's unique identifier (CUID).
    2. Use the source object's name and path.
    You must decide how you would like the Import Wizard to handle scenarios where the objects already exist on the destination environment."
    Please refer to the Import Wizard Guide for the various options available with this tool.
    http://help.sap.com/
    I hope this answer was very helpful to you.
    Kind regards,
    John

  • Error in BizTalk Web Service publishing wizard BizTalk 2013

    Hi,
    I am facing an error when i am trying to publish a BizTalk orchestration as a Web Service. It is a very generic error message that is popping up.
    Failed to create project "http://localhost/mycode.Orchestrations_Proxy".
    Object reference not set to an instance of an object
    I tried publishing the same orchestration as a WCF service. It was publishing it without any errors.
    Could you please let me know of any solutions for this error.
    Regards,
    Ujjwal
    -Ujjwal

    Just as a remark, but you might want to reconsider exposing an orchestration as web service and expose the schema as a web service instead.
    This allows more flexibility and maintainability. For every change in the orchestration you have to rerun the publishing wizard. It is not a best practice.
    http://msdn.microsoft.com/en-us/magazine/cc163423.aspx
    Jean-Paul Smit | Didago IT Consultancy
    Blog |
    Twitter | LinkedIn
    MCTS BizTalk 2006/2010 + Certified SOA Architect
    Please indicate "Mark as Answer" if this post has answered the question.

  • Web Publishing Wizard

    Hi
     I have used hours to find out where to find the Web Publishing Wizard, with no Luck. Anybody that know where to find it. I do want to administrate the releases of my Application and do think the use of this tool is the way to do it. I am using MS Visual
    Studio Express 2013 for Web.  Regards Egil Ryengen

    Hi EgilRyengen,
    This issue is related with VS Web Deployment Projects forum.
    I have no VS2010 express by hand. As far as I know, if we need to publish a web app in VS Ultimate, we can right-click the project name in the solution explorer and choose "publish". You can check if you can find the publish wizard in the
    method above. If you still can't find it, please ask there.
    http://forums.asp.net/1020.aspx/1?VS+Web+Deployment+Projects
    To tell the truth, I want to help move this thread there, but I can't because they are two different forums.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • When I enter the website, Firefox stops responding and I have to end the process from the Task Manager. How do I solve this problem?

    I am running Firefox 4.0 beta 7 on Windows XP Tablet Edition OS. When I enter this site using Firefox, the browser stops responding and I have to end the process using Task Manager. However, when I open it with other browsers such as IE8, I am able to view the site as per normal. This only happened when I updated my browser to Beta 7 and I did not have such problems in the previous betas.

    There is [[Flash]] content on that page.
    Do you have a problem with Flash on other websites?
    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

Maybe you are looking for