Problem importing video from a DV camera into the new imovie 10.0? I have a Sony DCR TRV17 connected via Firewire port that worked in 9.0.9 but not under 10.0...

I have a Sony DCR TRV17 that I used to pass through VCR tape video via Firewire port to my Mac Pro under Imovie 9.0.9 without an issue. Now under Imovie 10.0 the video shows in the import window, I can start recording yet when I stop recording the recorded clips do not show up anywhere. The movie file I'm creating still indicates that I still need to import video. Anyone having similar problems?

Hey Dave,
I had this issue only once before but was lucky enought to find it was a specific event causing the import to freeze. It took me some time to isolate the problem though. I would recommend letting it sit there for some time before you try any troubleshooting. Larger libraries can take long periods of time to update.
This is a good thread for this issue. I would first try removing the iMovie.plist as elikness mentions.
1. Open Finder
2. Click on "Go" in the menu bar.
3. Click on Go To Folder on the dropdown menu.
4. Type "~/Library/Preferences/" in the text field and click Go.
5. Find the com.apple.iMovie(some number).plist file and move it to Trash.
Quit and relaunch iMovie to see if this took care of the issue before attempting the next step. If you're still having an issue then you can try what I needed to do which is isolating the problem event.
1. Open Finder.
2. Go to the Movies folder. You should see iMovie Events here.
If you have a larger event library I'd recommend renaming the iMovie Events folder to say, "iMovie Events COPY". Then create a new empty folder named “iMovie Events”. When you launch iMovie 9.0.9 all events will be missing at this point. Quit iMovie if it is open. Then you can either drag each event from iMovie Events COPY to iMovie Events or you can select and drag several at a time. Each time you drag an event folder back into the new iMovie Events folder launch iMovie 9.0.9 to see if you are having the same issue. Wash and repeat until either you have found the problem event or you have imported all events.
If you find the problem event you can reimport the clip from iMovie 9.0.9 by going to File > Import > Movies and navigating to that events iMovie Original Movies folder to find the clip.
Hope this helps!

Similar Messages

Each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

just import the iPhoto
Surely you meant "just import the photo"? The Spell checker is dangerously creative !

I want to use my macBook Pro 2,2 (mid 2007) to display video being fed from a Canon 5D video out into the vectorscope in Final Cut Pro 7.0.3. Is it possible to input live video from another digital camera into the MacBookPro

I know that the built in iSight camera records video. I want to set up a Canon 5D video camera and feed the Canon's video output into the MacBook Pro so that I can use the vectorscope in Final Cut Pro to adjust the exposure of the Canon 5D. Basically I don't want to buy a vectorscope to have on set to make sure the picture is properly exposed and color balance is correct. (In your response it doesn't have to be the full scenario I've described. If you can just tell me if there's a way to feed live video into the MacBook and display it on the screen and possibly record it, then I'll figure out the rest.)

Dear Ben,
Thanks for your help. Apple and I dealt with this. It was an FCP, NOT Motion problem. As It seems you understand, we simply trashed my FCP prefs. Problem went right away.
Thanks. Do you live near Hammond? Played in a rugby tournment down there once. I was transformed.
MS

Can someone help with importing video from Canon XA10 (AVCHD) into PE 11?

In PE 11 when I import video from my canon xa10 (avchd) the quality is terrible, I also have a canon xa20, 60D and gopro that I video with and they all turn out with great video quality. Is there a reason why the xa10 video quality is bad? Setting I need to change?

dillonknopp
Thanks for the follow up.
In Premiere Elements 11 and 12 takes over setting the project preset based on the properties of the first file drag to the Timeline. Sometimes it does it right; sometimes not. You can check what the project has set by using the readings from Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out. If the project preset is set for NTSC AVCHD Full HD1080p30, then the Edit Menu/Project Settings/General should be as represented in the following screenshot
Please refer to setting the project preset yourself manually and then importing the source media into the project.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Depending on how the current stage of troubleshooting progresses, you might want to post a screenshot
of your Expert workspace, showing the Edit area monitor display of the rendered Timeline.
We will be watching for your results.
Thank you.
ATR

Can't import video from Canon GL-2 into new Macbook Pro

Can't import video from Canon GL-2 into new Macbook Pro
Using 9-4 pin cable and then using firewire 800 to thunderbolt adapter.

Does the MBP see the camera at all?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How do I import video from my iPhone 5S into iPhoto?

How do I import video from my iPhone 5S into iPhoto?

Connect the phone to the Mac and launch iPhoto. Select the videos in the import window and click import.

How do I import video from an external drive into I movie

How do I import video from an external drive into I movie?..I can't seem to get it to work I am new to apple

you can either drag it to the imovie window or import it from the file menu.
unless it's in an unsupported format.

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

How do i get backed up purchases from an old iphone to a new one, but the only problem is an ipod is backed up into the new phone and i cant get my iphone data on to the new phone because its under i pod

how do i get backed up purchases from an old iphone to a new one, but the only problem is an ipod is backed up into the new phone and i cant get my iphone data on to the new phone because its under i pod?

Thanks very much!
Although I had to add everything again to the playlist, at least I can just copy it over in future!

I have video files on my desktop that i want to put into the new imovie 10. I click on import and try to click on desktop but it wont let me

I have video files on my desktop that i want to put into the new imovie 10. I click on import and try to click on desktop but it wont let me. Thanks for any help you can give!

Are you in your user account?
In the Import window you'll see a Desktop folder at the root level of our drive. You don't want that one.
You want the one in your the folder for your user account.
Matt

It is very difficult to import audio files from extern drives (NAS) into the new garageband

it is very difficult to import audio files from extern drives (NAS) into the new garageband.

Are you trying to open an audio file in GarageBand or a GarageBand project?
To open an audio file drag it from your NAS to a real-instrument track in GarageBand.
If you are trying to open a GarageBand project - can you open the same project, if you copy it to your system drive?
Trying Google translate -
Bent u probeert om een audiobestand in GarageBand of een GarageBand-project te openen?
Om een audiobestand slepen uit uw NAS naar een real-instrument track in GarageBand openen.
Als u probeert een GarageBand-project te openen - kunt u hetzelfde project opent, als u het kopiëren naar uw systeem schijf?

My HDD crashed in my old PC and I built a new system. iTunes won't let me sync the music from my ipod back into the new version of iTunes I had to download. How do I fix?

My HDD crashed in my old PC and I built a new system. iTunes won't let me sync the music from my iPod back into the new version of iTunes I had to download. How do I fix?

Syncing music via iTunes is only one way: from iTunes to your iPod. If you need to copy the music from your iPod back to your PC, see this older post from another forum member Zevoneer covering the different ways to do this.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Application for importing videos from a digital camera

I have a Canon PowerShot SD100 that I got a year and a half ago. It came with a CD that included software that could be used to import both the pictures and videos it took. However, after installing it, the CD got lost, probably ended up in the trash, and now I have no way to import the videos onto my new computer. (I use iPhoto for the pictures.)
Canon doesn't have a version of that same software, called ImageBrowser, available for download, and I've looked on my computer, but I can't seem to find any application that I could use to import the videos.
If anyone knows of a free application that would let me import my videos, I'd greatly appreciate it.
Thanks a ton!
Jill

I don't use any software for importing videos from my camera I take the memory card out the camera. I insert it into my card reader. The memory card mounts on my desktop I can then drag and drop the movies from the card into my movies folder.

Problem importing video from a DV camera into the new imovie 10.0? I have a Sony DCR TRV17 connected via Firewire port that worked in 9.0.9 but not under 10.0...

Similar Messages

Maybe you are looking for