Problem in Activating "Creating Error DTP" Button

Hi All,
I have created a DTP between an InfoCube and an Open Hub destination.
But in the UPDATE tab of the DTP, the "Creating Error DTP" option is not active(its blurred even in edit mode). How should i make the button active??

Hello Roy,
Pls refer this weblog
/people/kamaljeet.kharbanda/blog/2006/12/07/error-dtp--bi2004s
From Std SAP Help
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Thanks
Chandran

Similar Messages

Problem in activation of "Certify Completion" Button in LBK1.

Hi Experts,
We are working on LBK1 logbook entry.
The Certify Completion Button in Notification is coming correctly, but in Log Entry this button is not displayed.
How we can activate / display this button in LBK1 ?
Study SAP

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

Steps to create an error DTP

Hello,
What are the precise steps to create an error DTP?
I tried this by going to my DTP > Update tab > click on button "Creating Error DTPs" > provide package and transport number
BUT, I get error:
"Invalid call sequence for interfaces when recording changes"
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator
I have BI 7.0, SP 7
Thank you.
Mario

Hi ,
Pls check this blog on 'Error DTP' - BI@2004s
/people/kamaljeet.kharbanda/blog/2006/12/07/error-dtp--bi2004s
Hope this helps,
regards
CSM Reddy

Active Content W/ Rollover Buttons Help

I'm pretty new to web design, and I've been using dreamweaver
to create webpages. My problem is I have some rollover buttons I
made in fireworks and imported to dreamweaver as fireworks html,
and in IE7 I get the "activate active content" error. I installed
the dreamweaver 8.2 update, thinking that would fix it, but
although I can see that the extension to automatically change the
code so it'll work in IE in my preferences, the option to do so
never comes up. I read somewhere that it doesn't support image
tags, which I think mine are. So my question is: is there an easy
fix for this other than the update, or at least a fix for a
beginner who doesn't know javascript? I've googled to my heart's
content, and everything I've come across has been over my head.
Please someone help me with this. I can also post the code if
that'll help, just let me know. Thanks in advance!
Hiram

I'm not quite sure what the actual issue is here but several
things seem to
be confused.
My problem is I have some rollover buttons I made in
fireworks and
> imported to dreamweaver as fireworks html, and in IE7 I
get the "activate
> active content" error.
Buttons made in Fireworks and activated with Javascript are
not related to
the "activate active content" issue.
Do you have some Flash or other active content on your page
which is
triggering the "click to activate" which you're confusing
with your
Fireworks buttons?
I installed the dreamweaver 8.2 update, thinking that
> would fix it, but although I can see that the extension
to automatically
> change
> the code so it'll work in IE in my preferences, the
option to do so never
> comes
> up. I read somewhere that it doesn't support image tags,
which I think
> mine
> are.
I don't quite follow this part.
So my question is: is there an easy fix for this other than
the update, or
> at least a fix for a beginner who doesn't know
javascript?
Web content driven by Javascript is not active content so I'm
not sure what
the issue is or what needs fixing.
Can you post a link to your page?
Regards
John Waller

Error DTP is not working.

Hi
I have a question regarding DTP error handling. I have erronious data on PSA, now i am correcting data in PSA and loading to ODS and activating.As it is a full load, I want to keep these records in an another table like error PSA in 3.x. How it is possible in BI. I have created Error DTP which will post error records in Error stack and dont let the load fail. But it is not working.
Please help me.
Haaris

HI,
On the Update tab page in the data transfer process (DTP), the error handling settings allow you to control how the system responds if errors occur in the data records when data is transferred from a DTP source to a DTP target.
These settings were previously made in the Info Package. When using data transfer processes, Info Packages only write to the PSA. Therefore, error handling settings are no longer made in the Info Package but in the data transfer process.
Settings for Error Handling
For a data transfer process (DTP), you can specify how you want the system to respond when data records contain errors. If you activate error handling, the records with errors are written to a request-based database table (PSA table). This is the error stack. You can use a special data transfer process, the error DTP, to update the records to the target.
Temporary storage is available after each processing step of the DTP request. This allows you to determine the processing step in which the error occurred.
"Repairing" with Error DTP
You create an error DTP for an active data transfer process on the Update tab page. You run it directly in the background or include it in a process chain so that you can schedule it regularly in the context of your process chain. The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer it to the target that you have already defined in the data transfer process.
Thanks/Tarak

Changing update mode in Error DTP

Hi Gurus,
I have some issues with data in PSA. I am trying to solve it using Error DTP.
While Executing DTP one record failed to load giving bad request. Now i created an error DTP. By default the extraction mode is Delta.
DTP extraction Mode->Full
Error DTP Extraction Mode -> Delta; How can i make it full. If i amm trying to change it, The option is disabled.
Thanks in advance!
Regards
Anu

Hi Anu,
In my system original DTP is full and when i create error DTP, i got error DTP extraction mode is full.
Yes you are right, it is disabled.can you check the update mode of your original DTP once.
once the error DTP is created, we can not change the update of it.
Regards,
Venkatesh.

Partial load - Error DTP

I am trying to load data from Info Cube to Info Cube but its partial. So I have used a filter in the DTP. I want to use the multiple selection. When I execute the DTP, In the monitor it says No records found. Once I have gone to see the DTP...It shows Creating Error DTPs. Can you please provide me the screen shot and explain me little bit how to use filter in DTP?
Thanks
Ramakant

Without filter its working fine.(Loading all the records)
When I set the filter for range of values (Customer1 to Customer10) still it is not populating the values in the IC. Monitor shows 0 records updated. When you look back in the DTP..it just say Error in DTP.
In RSMO my IC is not there. I am not using any routines..doing it manually.
How to analyse the DTP error? Which T-code will help?
Thanks
Rk..
Edited by: RK on Jan 11, 2008 6:32 PM

Every time I try to create a new button I get "photoshop file error -1"

I'm creating a BluRay set of discs. I'm on number 4 and there will probably be 12. I use the previous discs as a template for the new ones to save huge amounts of time. I haven't had an issue till I opened my project today. Usually I right click on a menu, edit it in photoshop, save it back in, and then I right click the new elemnts and turn them into buttons. I've made dozens of menus like this. Then today I get "photoshop file error -1" that pops up every time I try to make something into a button. I deleted the menu I was working on and used a different menu to rebuild it but I get the same problem. I then opened the photoshop file and saved it to a different location outside the project and then imported it into Encore. Same problem once I tried to make buttons. I also tried trashing the preferences. No Luck. I really need to get this working. It has completely destroyed my ability to get this job done. Ideas anyone?
If it helps, I am on a Mac running OS X 10.9.1. Encore is version CS5.1.

I thought there ought to be way to add buttons from the Encore library, but I don't think we found one.
Best case: add menu from the library with buttons like what you want. Change background etc.
I like working that way rather than adding things within Encore.
Worst case: add a menu with the buttons you want; "edit in photoshop" and also "edit in photoshop" your menu; copy paste to your menu.
You can also directly open library menus; add buttons etc from the encore library folders. I would make a copy of them first. Encore imports a menu from the library to your project; it is never working on its master copy.

Modified "Create error table" from CKM SQL problem

Hi guys!
I have a strange problem while creating error table by the CKM. I've changed in the interface from flow control to static control and now the command to create error table looks like:
create table STG_TMP.E$_I_D_ASSORTMENT_S
ERR_TYPE VARCHAR2(1 CHAR) NULL,
ERR_MESS VARCHAR2(250 CHAR) NULL,
CHECK_DATE DATE NULL,
ORIGIN VARCHAR2(100 CHAR) NULL,
CONS_NAME VARCHAR2(35 CHAR) NULL,
CONS_TYPE VARCHAR2(2 CHAR) NULL
the create error table(it should create table with all the columns varchar2 and handle the situation when column is number(0,0) => varchar2(255)) step from CKM is:
<%=snpRef.getColList("<?\t", "int vL[POS]=[LONGC]+[SCALE]; if(\u0022[DEST_DT]\u0022.equals(\u0022DATE\u0022)) {vL[POS]=20;}; if(\u0022[DEST_DT]\u0022.equals(\u0022NUMBER\u0022) && vL[POS]==0) {vL[POS]=255;};", "\n \t", "\n?>", "INS")%>
create table <%=snpRef.getTable("L","ERR_NAME", "W")%>
ERR_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "1", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
ERR_MESS <%=snpRef.getDataType("DEST_VARCHAR", "250", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CHECK_DATE <%=snpRef.getDataType("DEST_DATE", "", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
<%=snpRef.getColList("", "[COL_NAME]\t varchar2 (<?=vL[POS]?>) " + snpRef.getInfo("DEST_DDL_NULL"), ",\n\t", "", "INS")%>,
ORIGIN <%=snpRef.getDataType("DEST_VARCHAR", "100", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_NAME <%=snpRef.getDataType("DEST_VARCHAR", "35", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "2", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>
Do you know whats the problem??
Thanks in advance :)
With regards,
PsmakR

What version of ODI are you using ?
Are you still using Sunopsis ?
Try using ODI 10.1.3.5
Also, follow the solution in post
Issue with Create Target Table in CKM Oracle

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

Problem in activating "Certify Completion" Button in LBK1.

Hi Experts,
We are working on LBK1 logbook entry.
The Certify Completion Button in Notification is coming correctly, but in Log Entry this button is not displayed.
How we can activate / display this button in LBK1 ?
Study SAP

Hello Roy,
Pls refer this weblog
/people/kamaljeet.kharbanda/blog/2006/12/07/error-dtp--bi2004s
From Std SAP Help
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Thanks
Chandran

Adobe Digital editions activation server error code E_AUTH_NOT_READY. going on for weeks altering registry not something one should fool with. Please Adobe correct your problem.......

Adobe digital editions activation server error E_AUTH_NOT_READY. This has been going on for months... Please adobe do something about your problem. Altering the registry in my computer is not something anyone should fool with.....

Adobe digital editions activation server error E_AUTH_NOT_READY. This has been going on for months... Please adobe do something about your problem. Altering the registry in my computer is not something anyone should fool with.....

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

Please carefully read and also book mark:
Time Machine Troubleshooting
Time Machine FAQs

HT201365 Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much

Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host>

Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host>

Make "create transfer routine" button active

Hello Gurus,
        for infoprovider of infoobject, under transfer routine of general tab,
       " transfer routine exists" is checked, but is grep-coulored
       "create transfer routine" button is grey-coulored.
       how can I make "create transfer routine" button active ?
Many thanks,

Hello,
Click on the Pencil Icon in the InfoSource/Transfer Rules screen. Then click on the transfer routine you will be able to create and change.
Thanks
Chandran

Problem in Activating "Creating Error DTP" Button

Similar Messages

Maybe you are looking for