Problem in choose schema created to work

Hi I am new comer of oracle. I have question that i create 2 schema 1st
named is my_work and password is something1, and I created another
schema create password to another one. So problem is I want to back to
use 1st schema but I can't login to 1st schema, can use only username
and password of 2nd schema

If you are getting invalid username/password error, login as sys user and change the password of first user
alter user my_work identified by newpassword;
Also see that you have granted connect to the user.
Chandar

Similar Messages

Creation of a Database Schema is not working (Into a Sync Group)

Hello,
We have in: Sql Databases > Sync > Sync Group, a group called "SyncGroupViviendasProyectosVentasPruebas"
If we go to "Sync Rules" and click "DEFINE SYNC RULES", no matter the databse we choose (there are 2), when we click in "REFRESH
THE DATABASE SCHEMA" it dont works!
It seems to be working but minutes later there is no Schema created.
Why? Why the Create Database Schema is not working?
Thanks,

The detail error log from our service backend is:
'Type=Microsoft.SqlServer.Management.Sdk.Sfc.InvalidVersionEnumeratorException,Message=Operation not supported on version 11.0 SqlAzureDatabase.,Source=Microsoft.SqlServer.SqlEnum,StackTrace=   at Microsoft.SqlServer.Management.Smo.XmlReadDoc.LoadFile(Assembly
a, String strFile)
   at Microsoft.SqlServer.Management.Smo.SqlObject.LoadInitDataFromAssemblyInternal(Assembly assemblyObject, String file, ServerVersion ver, String alias, StringCollection requestedFields, Boolean store,
StringCollection roAfterCreation, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Smo.SqlObject.LoadInitData(String file, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.LoadElement(ObjectLoadInfo oli, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.GetElement(ObjectLoadInfo oli, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.GetAllElements(Urn urn, ServerVersion ver, DatabaseEngineType databaseEngineType, Object ci)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetObjectsFromCache(Urn urn, Object ci)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request),'
It might be a collation/SMO issue after I do some research, so may I know that have you change the collation of you SQL Azure database? If yes, please try to use default collation and try again.
Regards,
Bowen

Problem in building schema when try to invoke the another BPEL service

Hi all,
Whenever try to Invoke a another BPEL service using the Invoke activiy and Partnerlink, we need to create a variable structure similar to the providing service.
For this I used create Auto Varible option available in the invoke activity. But after creating the variable, I tried to expand the variable for the copy operation, the error iam getting is Problem in building schema.
This error never happened to me before. I have no clue.
Jdev version:10.1.3.3.0
Soa version:10.1.3.3.0
Please help me on this.
Thanks.

Hi Lokesh,
Iam not able to understand what you are trying to say. But my Input variable and Invoke Input variable are compatible, no problem on this. I got some clue from your reply.
Finally I got it worked by doing it in another way.
In my Invoking BPEL Process(ie. BPEL Process is trying to invoke the another BPEL Process using Partnerlink) wsdl I imported the partnerlink BPEL schema and it get solved my problem.
eg) <import namespace="http://xmlns.oracle.com/BpelProcessname" schemaLocation="ParnerLinkBPELSchema.xsd"/>
This can be usefull for others and I never did this to import the schema manually before, but it works without any errors.
Now only it causing this problem, whether it is any Jdeveloper issue.
And i tryed this using Jdev version 10.1.3.4.0, but still the same exception.
This workaround will usefull for others.
Thanks for your reply.
bye.....

Unexpected problem with authorization scheme of type plsql function

Hi,
I have created one authorization scheme of type plsql function returning boolean. Authorization scheme is for pages only. p2_user_priviledge is a textbox on home page which extract privilege (list of pagenos) for login user from database. Home page has no authorization required. AUTHORIZATION SCHEME always returns false. I am not able to trace problem in my code. same code works fine for a textbox's default returning 'c'.
----- CODE FOR AUTHORIZATION SCHEME------------------------------------------------------------
declare
pageid varchar2(10);
privilege varchar2(300);
c number(3);
begin
pageid := ':P'||to_char(:app_page_id)||':' ; ---Pageno get stored in format *:P2:*
privilege := trim(:p2_user_priviledge); ++------Contain list of privilege like :P2:P13:P67:P23: etc+++ select instr(privilege,pageid) into c from dual;
if c>0 then
return true;
else
return false;
end if;
end;
One more problem is again related to authorization scheme.
I created one application and one authorization scheme (auth_aug) which worked finely. Then after some days i added 10 more pages to same application, But now autho_aug was always returning false for new pages. So i copied code from 'autho_aug' to new scheme 'autho_sept', & it worked for new pages. I don't understand if code is same for both scheme, why required to use two different schemes.
Now i have added few more pages to application, and facing problem mentioned earlier.
any solution for both the problems.....

Hi,
Let me clear my problem once again.
-->Home page i.e. P2 does not use authorization, So it is displayed along with text item :p2_user_privilege.
-->Then user click on one of the links , Now page :P70: should get displayed.
P70 is using authorization scheme.
-->But :p2_user_priviledge value is not accessible at authorization scheme, I dont know why.
I could not find out where to create Application item , as suggested by you.
& not able to find Developer menu , session at home page as suggested earlier.
And one more question, my application at runtime display
X en us
at bottom
How to make it
USER: X Language: en us
Like in development environment.
Hope I have cleared my problem, waiting for reply.
Edited by: TEJU on Nov 17, 2008 9:25 AM

I can't open Itunes on my laptop. "Itunes has stopped working. A problem causes the program to stop working correctly. windows will close the program and notify you if a solution is available" is the message. what is the problem here?

I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot the machine, Uninstall and re install the Itune program, stilll the same message pops up.

The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?

Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

I copied our entire music folder from old PC on tovnew iMac, all our muisc is there, but not our individual libraries have gone. and holding down the alt key when opening iTunes, brings up no options to choose or create libarys, can i recover our liba

Hi
I copied our entire music folder from our old pc on to the new imac, and all the apps, music etc is there, but no individual libarys, we had 5 very different ones, when pressing and holding the alt key on opeing itunes, nothing happens it just opens into itunes, no option to choose or create a libary, what am i doing wrong?

Did you copy the entire iTunes folder, not just media? This includes the critical library.itl file.
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
Now you say you had 5 libraries. If you really mean that then you would have to have copied 5 different iTunes folders in their entirety, not just one folder. Anyway, something makes me feel you did not copy a whole iTunes folder and all its subfolders and files, you only copied the music.
On the starting with the option (alt) key held down I really don't know what to advise. It works for me hundreds of times and just about everybody else here. The only thing I can suggest is to hold the key down longer or perhaps start iTunes and then 1 second later hold down the key for a few seconds.

When i load i tunes, it comes up with error message stating "i tunes has stopped working.A problem caused the program to stop working correctly. Windows will clode the program and notify you if a solution is available". I have no idea to fix

New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Facing problem in xml schema xsd file registration

Hi,
i am facing problem in xml schema xsd file registration when
the number of column is more. It is showing persing error.
if i am deleting few column from xsd file . It is working otherwise
showing error. Is there any solution for that please suggest me.
The Error is
ORA-31011:XML parsing failed
ORA_19202: Error occurred in XML processing
LPX-00230 : (message vary time to time-like invalid tag ending etc.)
Regards
Manoranjan
and thanks in advance

Where is you XML coming from. Are you sure it's valid. If you are hard coding it as a SQL String constant are you hitting the 4k / 32K limit on the size of SQL / PL/SQL constant. Have you tried loading the content from a bfile..

Problem in Function while creating dependency not getting solved

Hi All,
I am not getting any solution even after debuging it many times,
This is second time I am posting same problem , Please help me out if possible
I am working on a Program in which I have to create Class , local and global dependency -
For class createion i am using
BAPI_CLASS_CREATE
For local dependency i m using
CAMA_CLASS_MAINTAIN_DEP
For Global dependency i am using
CAMA_CLASS_ALLOCAT_GLOB_DEP
Now my problem is that I am able to create Class and only 1 of the dependency either local or global whihever function I am calling first
But while debugging program I am able to create Class as well as both dependencies successfully
Please can any one tell while this is runing successfully only at the time of debugging
Code -
have used -
CALL FUNCTION 'BAPI_CLASS_CREATE'
EXPORTING
CLASSNUMNEW = TCLASS-CLASS
CLASSTYPENEW = TEXP1-KLART
CLASSBASICDATA = CLASSBASICDATA
CHANGENUMBER = SAENNR
TABLES
CLASSDESCRIPTIONS = CLASSDESCRIPTIONS
CLASSLONGTEXTS = CLASSLONGTEXTS
CLASSCHARACTERISTICS = CLASSCHARACTERISTICS
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = TRET2.
CALL FUNCTION 'CAMA_CLASS_ALLOCAT_GLOB_DEP'
EXPORTING
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
CLASS_DEP_ASSIGN = T_GLBDEP
EXCEPTIONS
ERROR = 1
WARNING = 2
OTHERS = 3.
CALL FUNCTION 'CAMA_CLASS_MAINTAIN_DEP'
EXPORTING
CLASS = TCLASS-CLASS
CLASS_TYPE = SKLART
DEPENDENCY_DATA = T_DEPDATA
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
SOURCE = TSOURCE
EXCEPTIONS
ERROR = 1
WARNING = 2.
I have no problem in creating Class using Bapi ,
Problem I am facing here in creating Local and global dependency together which i am able to create in debugging mode only otherwise either Local or global whichever function i am using first
Regards
Preeti

duplicate post locked
Re: Problem in Function while creating dependency

Problem with database schema objects in the entity object wizard

Hi All,
When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to select the synonym check box.
Can any of you folks tell me how to enable the database schema objects (check boxes for tables,synonyms...).
Thanks in Advance.
Raja.M

Make sure your using rite version of jdeveloper..
Make sure your using apps schema and check whether your able perform DML operations in the schema vis sql developer.
--Prasanna

My problems with Oracle Schema Processor for C++ :(

Dear ;) Oracle XML team and others,
the followings are really inconvenient with the C++ schema processor:
-it doesn't even support the Candidate
Recommendation (OK, the Java version does
support it, and you can use XSU and upgrade your schemas later when the C++ will also
support it.)
-you cannot put comments in the schema, just after the <xsd:schema> element.
-it's checking the attribute use="required"
when an attribute is declared in a
complexType, but it doesn't check
when an attribute is referenced or, which could be much more useful, when an
attributegroup is referenced, and it contains
use attributes. (I tried XMLSpy and it was correct. But I need an API or a C++ tool.)
I'm really awaiting this schema processor to be updated (maybe on April 14 the W3C Schema recommendation ;))
-it supports "import" but I had problems with "include" (this looked like a bug, but after I'd posted it, noone replied :(. Maybe because the C++ processor is kind of "obsolete")
Will the C++ version be updated? (When?)
I cannot use Java because I try to integrate with a C++ application. I was looking for
other products, but I only found XSV, Java XSD processors and built-in tools. It's quite sad that there isn't a C++ implementation available. :( Can anyone help me?
Tamas
null

Originally posted by Tamas >Marcinkovics ([email protected]):
Dear ;) Oracle XML team and others,
-you cannot put comments in the schema, just >after the <xsd:schema> element.I tried the following:
<?xml version="1.0"?>
<schema
xmlns = "http://www.w3.org/1999/XMLSchema"
targetNamespace = "http://www.CarDealers.com/">

<element name="Car">
</element>
</schema>
and it works!
Can you provide some examples?
Thx!
null

Error: Outlook could not create the work file. Office 2013

I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?

Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support

Updating custom schema created using RCU

I followed the following chapter from RCU user guide to create a custom schema using RCU:
[Extending Repository Creation Utility to Configure Custom Application Repositories|http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14259/rcu_extend.htm]
RCU allows only two operations - 1. create a new schema OR 2. drop a schema.
Can RCU be used to update or modify a custom schema, which has been created using RCU itself?
The use case is: update certain rows in a few tables of the custom schema, whenever there is a fix.
Basically we need to deliver patches (insert scripts containing the fixed or corrected data) to the custom schema created using RCU.
Does RCU support this use case?
Thanks,
Mahendra
Edited by: Mahendra Varman on Jun 8, 2011 5:10 PM

Thanks for the suggestions. Having a bad day with this today.
Unfortunately, it did not work. I had to re-install the whole thing with the repository in an 11g database and that didn't work either! (see OBIEE 11g: Cannot log into BI Publisher after fresh Install
Thanks.

Problem in choose schema created to work

Similar Messages

Maybe you are looking for