Problem in configuring the Mobile Server.

Hi,
I am trying to configure Mobile Server for Apache for the Apache Server. I am following the steps listed in the Installation guide. As listed in the document I did the changes in the Apache Configuration file "httpd.conf" i.e. I included the Mobile Server module confuguration file into Apache Config file. On starting the apache server I am getting following listed warning,
"[Wed Apr 28 18:14:46 2004] [warn] Loaded DSO D:\oracle\oralite\mobile\server\bin\wtgapach.DLL uses plain Apache 1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)".
The Apache server is working and through browser I am able to access the default page. But as mentioned in the Mobile Server configuration section the Mobile server is not started or at least I do not know how to access the Mobile server through browser.
Please let me know if the cause of the warning message has any effect on the Mobile Server instantiation and if not how can I access the Mobile Server?
Thanks,
Sachin.

Hi,
I am trying to install the Oracle Lite suit versioned 5.0.2 for Windows. The RDBMS is Oralce 9i (9.2.0.1). I am able to install the Mobile server. Refering the Installation mannual I am trying to configure and run the mobile serve in either standalone mode or with Oracle HTTP server. In the installation mannual it is mentioned that the HTTPD.conf file for apache http server should be modified to include the wtgapach.conf file from the Oralce Lite ORACLE_HOME\mobile\server\bin folder. On making this change and starting the apache server I am getting the error listed in the post. In the mannual it is mentioned that for standalone mode run the webtogo executable from the bin folder. On doing so I am getting a message
"D:\oracle\oralite\Mobile\Server\bin>webtogo
Unrecognized option: -Xrs"
So currently I am stuck and do not know how to start the mobile server. Please let me know the appropriate steps to start the Mobile server in stadalone as well as with Oracle HTTP server.
Also as mentioned by you I replaced the wtgapach.conf with wtgias.conf. The warning message which was displaying earlier on start of Apache is now gone but if tried to start the mobile server from the browser it is not working as expected.
Thanks and Regards,
Sachin.

Similar Messages

The Blackbery device simulator is not able to connect to the mobile server.

Hi
While login to Sap Mobile BI i get the below error.
"unable to connect to mobile server.The request is timed out(0x008)"

Thank You for your reply.I had no problem with the mobile network connections it is on.The issue i am facing i am using proxy server deployment where we don't have to mention host_port in the vas cluster configuration due to which i m not able to connect to blackberry Simulator which is on client machine.But if i specify the client machine port to Host_port then i m able to connect.Can you help me to configure the Mobile server for a non-BlackBerry
deployment that uses a proxy server

Please help me in setting the Mobile server for mobile filed services

hi,
We want to set the oracle mobile server, Oracle mobile filed service, can any body help out what are the mandatory setups and flow of the setup.
Can you also let me know the list of patch and requried services information too.
Thanks & Regard
Abdul Hafeez Shaik

Thank you Kevin,
I have already gone through this document.
My actual problem is like, After starting the Mobile server when I tried to run this url <url:/portnumber>/webtogo/setup Am getting the webpage with junk values.
What other patch's or what other setups we need to do to have the functionality like when ever we run the above given url it will install the client side software (webtogo + oracle lite database)
Please if you can give me the quick setups which we need to do that would be help full to us.
Best Regards
Abdul Hafeez Shaik

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

Problem in Configuring the Object Editor User Interface

Hi,
     I m using NetWeaver 7.0.11 & facing the problem in Configuring the Object Editor User Interface.In the Configuration Browser ,when i click on Object Editor & choose New Configuration & try to select service,it shows the flollowing error:
com.sap.caf.rt.exception.CAFBaseRuntimeException: Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject.
     at com.sap.caf.rt.ui.cool.generic.ServiceFacade.init(ServiceFacade.java:121)
     at com.sap.caf.rt.ui.cool.generic.ServiceFacade.<init>(ServiceFacade.java:50)
     at com.sap.caf.rt.ui.cool.generic.ServiceFacadeFactory.getFacadeInstance(ServiceFacadeFactory.java:51)
     at com.sap.caf.ui.utils.cool.CoolUtils.getServiceFacade(CoolUtils.java:123)
     at com.sap.caf.ui.ptn.objecteditor.ObjectEditorCC.getServiceFacade(ObjectEditorCC.java:505)
     at com.sap.caf.ui.ptn.objecteditor.wdp.InternalObjectEditorCC.getServiceFacade(InternalObjectEditorCC.java:245)
     at com.sap.caf.ui.ptn.objecteditor.config.OEconfiguratorLayout.onActionSelectModule(OEconfiguratorLayout.java:322)
     at com.sap.caf.ui.ptn.objecteditor.config.wdp.InternalOEconfiguratorLayout.wdInvokeEventHandler(InternalOEconfiguratorLayout.java:300)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Can anybody please tell,what can be the problem?
regards
Sumit

Hello Sumit
This is most probably the result of metadata corruption on runtime.
A possible workaround for this situation is:
Undeploy all the metadata DCs of all the CAF applications you have
deployed (these are the components which names end on "/metadata", excl.
caf/core/metadata and caf/tc/metadata (which are part of CAF itself)).
And then deploy the CAF applications again.
Regards,
Désiré

How to Configure the Weblogic Server 6.0 Beta version with Solaris 8

Hello,
I have problem in starting the weblogic server 6.0 beta version.
It is occupying hell of space and running very slow. When I try
to deploy the bean it is throwing exception like timeout.
Plese do suggest me what to do. and how to configure properly.
Thank you,

That typically happens when you have your database connections configured
incorrectly. WebLogic is timing out on accessing the database.
Michael Girdley
BEA Systems Inc
"Laxmikanth" <[email protected]> wrote in message
news:3a35523c$[email protected]..
>
Hello,
I have problem in starting the weblogic server 6.0 beta version.
It is occupying hell of space and running very slow. When I try
to deploy the bean it is throwing exception like timeout.
Plese do suggest me what to do. and how to configure properly.
Thank you,

Problem in configuring Apache Web Server v2.2

Hi,
I am facing problem in configuring apache web server with tomcat 7.0. I want to configure the web server in such a way that I can access the application only using the localhost(without appending the port to it). Ex I want to access the application through "http://localhost" instead of "http://localhost:8080".
I tried to configure it using the concept of vertical clustering and "load balancer", but failed to do that.
Can anyone please tell me steps to configure apache web server with tomcat or provide any useful link / urls to do that one.
Thanks in advance

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

How to install Oracle Lite ODBC driver without connecting the mobile server

My Oracle Lite version is 10g R3.
I am using branch office version application.
I wanted to connect oracle client database(.odb file) via Lite DSN in a windows XP machine without installing the client in that device.
Some of my users wanted to access the client database from backend which requires a DSN entry in that device.Oracle Lite ODBC gets registered in the device only when we do a setup from the mobile server or if Oracle 10g Lite MDK is installed.
I do not want either of this to be done in my user PC. I wanted a ODBC utility which will register oracle Lite ODBC Driver (Normal & Cleint) in the user PC so that i can manually create and configure the DSN.
Does anyone have a solution for this?
Regards,
Ashok Kumar.G

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

Problem in configuring Apache Tomcat Server

Hi, I am facing problem in configuring Apache Tomcat server. I have downloaded its version 4.1.18 from the Internet. After unzipping and installing it, I have enabled the Root Context, enabled the Invoker Servlet, haven't changed the port to 80 from default 8080, have turned on the Servlet Reloading, have set the Java_Home variable in autoexec.bat, and have changed the DOS memory setting to 4096.
Also, the concerned lines in my autoexec.bat file look like this:
path c:\windows;c:\windows\command;c:\jdk1.2;c:\jsdk2.0;
c:\JavaWebServer2.0;c:\jakarta-tomcat-4.1.18
set java_home=c:\jdk1.2
set tomcat_home-c:\jakarta-tomcat-4.1.18
set classpath=.;c:\ServDevel;.;c:\jakarta-tomcat-4.1.18\common\lib\servlet.jar;.;c:\jsdk2.0\lib\servlet.jar;.;
Still, after having done all this, when I start the server using startup.bat (which happens without any problems) and type in http://localhost:8080/ on the browser to test the server, nothing happens. It doesn't show me the Tomcat Welcome screen. I get an error page saying "This page is not available". Why? Where am I going wrong?
Sushant

1) Try http://127.0.0.1:8080
2) set tomcat_home-c:\jakarta-tomcat-4.1.18
Is the minus-sign after tomcat_home also in the autoexec.bat?
Replace it with an equals-sign
3) When you run startup.bat, is a new command window opened and are the following three lines displayed at the end? It should stay open, otherwise something is wrong (unless running as a service).
INFO: Initializing Coyote HTTP/1.1 on port 8080
Starting service Tomcat-Standalone
Apache Tomcat/4.1.18

Configuring the file server in KM and access,edit the documents from it

Hi friends,
My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
In KM what kind of file servers are there apart from the one it supports by default.
Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
To configure the file server is webDAV protocol required?
Points would be assigned for the helpful answer.
Thanks in advance.
Regards
Sireesha.

Dear Sireesha,
Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
Yes WebDAV protocol is required here.
You can create WebDav RM as well.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
The above links will help answer your queries.
Regards
Anjali

Can not start the mobile server

Hello,
I have the mobile server as an module of IAS on Linux, actually I am trying to start it but is the only component of IAS that I can not start

Do you actually get that HTTP error when you try to start the mobile server. Or do you get that error when the setup executable is running ?
I feel you are mixing up things.
Tell us exactly what you tried, and the error that you got.

Adobe LiveCycle ES 8.2 Installation Error can't configure the App Server from Config Manager

Hello All-
We are trying to install the Adobe LiveCycle ES 8.2 SP2 and we are getting some issues while configuring the Application Server from the Config Manager, not sure why are those showing up, we never had these issues before when we installed 8.0, please look at the lcm log and the screenshot I provided for the errors which we are getting.
We are trying to configure the remote Application Server WebSphere on Linux from my machine which is on Windows and i made the target Application Server as WebSphere and target platform as linux when i initially installed the livecycle media.
The LCM logs say it failed to run the jacl scripts in the LiveCycle root directory and we wonder why is it pointing for the target Application Server to the Application Server which resides on my machine rather than it should point to the one on server. I am not sure what's going on and we did exactly what we did for 8.0.
Below are the environment details where we are trying to install.
Adobe LiveCycle ES: 8.2 SP2
Database: IBM DB2 9.1 FP4.
JVM Version and Vendor: 1.5.0 IBM Corporation
Application server: IBM WebSphere Application Server/6.1.0.19
Operating System: Linux
Hardware: x86 .
Any help will be appreciated!
Thanks-
Karthik.

Hi All,
Even i was facing the same issue but i was able to resolve it.
Although the earlier reply from karthik_chowdary was sent way back in 2008 and i think would have got resolved till now, but still the resolution which i have found is
The port i was using on the app server conf screen was that of application server HTTP Port.
But here in case of WebSphere ND, we need to use port specified in WAS UI > System administrator > Deployment manager > Ports
Try using that by default it is 8879.
And this resolved the issue.
~Hkin

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

Problem in configuring the Mobile Server.

Similar Messages

Maybe you are looking for