Problem in creating a PO from SOCO

Hi,
I am working on SRM 4.0 , classic scenario.
When I am trying to create a PO from SOCO , I am getting the following error messages
1) Partner xxxxxxxxxxxxxxxxxxxxxxxxxxxxx not found.
2) Enter a country for partner with type 'Preferred Vendor'
I checked the GUID of the vendor which I am entering while creating a PO with one which is displayed in error. Both GUID's are different.
Also when I search the GUID displayed in the error message in VENMAP table . there is no corrosponding entry in the table for this GUID.
I checked the org. unit of vendor , the country field is maintained for the same.
There is no preferred vendor maintained in the SC also. From where the system is picking up this message ?
I would also like to add , in monitor SC application when I look at the item detail the system displays the message " Address Data has been Changed ". But I can not see any changes in the SC history.
I also checked PO10 tx for changes in the org unit but nothing has been changed there also.
From where the system is picking up this preferred vendor and messages ?
Would appreciate your help on this .

Hi Guys,
Thanks for your inputs.
The problem has been identified. The error is because the vendors are deleted completly from the system. And those were earlier used in shopping cart as preffered vendor. Thats why the system is throwing the error message.
As we can not process this SC further we want to delete this SC (line item). But again while deleting the SC the system is throwing the error message . "Business partner xxxxxxxxxxxxxxxxxxxxxxxx not found." Thus its not allowing us to delete the SC.
Do you have any ideas how we can delete the SC line items, or SC ? Any FM ?
Thank you,

Similar Messages

Problem in creating text file from report file

Hello Everybody...
I have problem in creating text file.
I had set System Parameter as below
DESTYPE : File
MODE : Character
DESNAME : gayu.txt
And ruler setting
Units : Character Cells
Character Cell Size : Horiziontal = 7
Vertiacle =12
GridSpacing : 1
no of snap points per grid spacing : 1
but when i run report it will give error
"REP_1219 M_2 or R_2 has no size -- length or width zero"
so is there any solution of that
or another way to convert report into text file?....

Hi Folks,
Please don't go after that Error as its a very deceptive one. Please don't go for altering your design Or changing the size of items in your layout.
Similar errors I have come across in reports. I think its due to file transfer type. You might have transferred the file in Binary and your File Mode I am seeing it as CHAR.
This normally happens while making the Report Format as "Text". Either you change that format which I think is possible in your case as your basic requirement is making a report output of CHAR type.
Please check for this error in Metalink and proceed accordingly. I could fix similar errors when I changed Format type to PDF(from text).
Regards
Shibu

Problems for creating a delivery from a order with less items

hye, I have created a delivery from a sales order and all is ok. So, If I put less quantity in severals items, the delivery is generated ok and the sales order is OPEN status.
Now , I want to generate a delivery from sales order, but I don´t want to include in my delivery all sales order's items. For example, if I have in my sales order four items (Itm1,Itm2,Itm3,Itm4) with theirs quantity, by SDK I want to generate the Delivery with Itm2 and Itm3 only. I can't do that. I hate It,jajajajajaja.
With the next FOR, I get do it with all Items but I don´t know to say it that when status = 0 "jump" this item.
         delivery.CardCode = Order.CardCode
         delivery.DocDueDate = Order.DocDueDate
         delivery.DocDate = Order.DocDate
         For i = 0 To Order.Lines.Count - 1
             delivery.Lines.BaseType = 17
             delivery.Lines.BaseEntry = Order.DocEntry
             Status = 1
              If Status <> 0 Then
                   delivery.Lines.BaseLine = place
                   If i <> Order.Lines.Count - 1 Then
                      delivery.Lines.Add
                      place = place + 1
                   End If
              End If
          Next
     retval = delivery.Add
Thanks and I hope to get a solution.

What is "it" that you cannot do (+ hate)???
What is "status"? LineStatus???
What is your problem when you try to skip an item?
PS: You should always use enums instead of hard-coded values e.g.: Use the BoAPARDocumentTypes Enumeration for delivery.Lines.BaseType

Hello, are there many others having problems with creating Genius Playlists from their iPhone 5's

Hello People,
are there many others experiencing problems creating Genius Playlists from their iPhone 5's???
I have a 64GB Black iPhone 5 and a 32GB White iPhone 5, I have recently performed a fresh install (wiped phone memory and installed Apps individually again) yet even after this and no less then several calls to Apple I am still unable to create a genius playlist on either phone. The message I receive after hitting the Genius "star" is "The operation couldn't be completed. Operation timed out" Operation timed out."
I have tried this also on 3G and receive the same message........

Lawrence Finch
ShadowDancer1000 wrote:
I wish Apple would have provided more detail on how it worked. I wouldn't have posted this if I new that SMS & Mac Calling had nothing to do with Bluetooth pairing.
You mean like this? Get help using Continuity with iOS 8 and OS X Yosemite
Please note how Apple articulates this though.
Check your settings
Check the following settings on your iPhone, iPad, or iPod touch:
Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
Go to Settings > Bluetooth and turn on Bluetooth if necessary.
Go to Settings > General > Handoff & Suggested Apps and make sure Handoff is on.
Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Sometimes things have to be explained in more detail for the general consumer who has been conditioned for decades to think about wireless cellphone audio / light data to [anything other device else] connectivity in a certain fashion. That is to say Bluetooth dependent ...
For the non-technical person, which overwhelmingly many Apple users are, they would see that bulleted point and think if Bluetooth is not paired and active, then they would not received the full scope of their Continuity features.
It would have been better for the copywriter who wrote this to (*) footnote this entry and explain that while Bluetooth recognition may be necessary between Yosemite and iPhone, SMS Push to iMessage and Mac Calling does not require an actively paired connection as these functions are dependent on iCloud and both devices being registered on the same WiFi network.
Thank you to all who helped me get my mind around and figure this out.
It has also opened my eyes to how iCloud has become a critical link in Apple's overall walled garden and business strategy.

Problem with "Create New Extrusion from Selected Layer" CC 2014

Hello, I'm experienced with Photoshop but am new to 3D text in Photoshop. I type in some text and convert to a shape. When I choose Create New Extrusion from Selected Layer I get dialog box I don't see in any tutorials. It says "You are about to create a 3D layer. Would you like to switch to the 3D workspace? Yes/No, Don't show again." Which should I use for 3D text?
If I choose Yes, all the panels go away and the content in the tool options bar (ribbon?) just under the menu bar go away. I have to restart Photoshop to get the tool options back. What could I be doing wrong?
Thanks - Dave

I just chose "No" and didn't look back. I like my workspace just as it is, and don't prefer Photoshop to change it for me under this particular case.
You can make the 3D panel visible yourself via Window - 3D. I find it's a good alternate for the Actions panel, as I don't have any actions at the moment that work in the 3D world.
The panels you'll want to see easily if you work on 3D are the 3D panel and the Properties panel, among a few others.
Regarding getting your workspace back the way you like it... Note the little selector near the upper-right corner of the Photoshop main window. That can be used to select a workspace. I suggest you experiment and get familiar with the concept of workspaces. You can define your own and save it with a name, and that truly can be helpful.
-Noel

Problems in create graphical report from Oracle FSG xml output using BIP

We are trying to create graphical reports from Oracle Financial Statement Generator (FSG) xml output. I personally have extensive exposure working with XML (BI) Publisher but until recently I have never tried to use the BIP charting wizard to create graphical reports from FSG xml output out of EBS 11i/R12.
I created an SR with Oracle but they had to create an enhancement request for this issue. Does anyone know or have any idea on how we can accomplish this. The charting wizard pops up but the xml tags available do not make any sense.
If anybody has any idea please send me an email at [email protected]
Thanks,
Leo

Try some thing like following
http://oraclebizint.wordpress.com/2008/03/10/oracle-bi-ee-101332-sending-reports-to-non-obi-users-delivery-manager-api-of-bi-publisher/

Problem in creating DATA Model from SQL SERVER 2008 in BI PUBLISHER

Dear Team,
I connect BI Publisher with SQL SERVER 2008 But On creating Report on BI,when we create data model...dataset,
i select the tables but when i click on RESULT i am geting this error.
error--
[Hyperion][SQLServer JDBC Driver][SQLServer]Invalid object name 'DBNAME.DBO.TABLE'.
please resolve this problem...
Thanks,
Him
Edited by: h on Aug 22, 2011 6:31 PM

Hi David,
The things I said are not a fix for this problem.
If your RCU installation worked, then you do not have to worry about modifying the createfr.sql.
Edit:
I've just tracked the problem. It appears that when using the query builder, BI forgets to add the " sign.
For example:
This query will give the hyperion error.
select     "table"."field"
from     "database.user"."table"
To correct it write it like this:
select     "table"."field"
from     "database"."user"."table"
Edited by: EBA on Nov 14, 2011 10:21 AM

Problems in creating Materialized View from 10g R2 to 11g

Hi,
We have two databases in 10g Release 2. These databases are on two different servers and we use
Materialized views to replicate data between these servers. We are currently using 64 bit version of
oracle 10g release 2 for LINUX.
Oracle Database 10g Release 10.2.0.1.0 - 64 bit Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
We use CENTOS 5 - 64 bit edition
We upgraded one of the databases to 11g (We exported the data from old database and
imported it in new database) . Then we tried to create a Materialized view with incremental refresh
on it where the base table is in the second Oracle 10g database.
The problem is that it is not letting us create the view with FAST Refresh. It kept on giving ORA-12028
error. We tried different remedies suggested on forums like creating a view with ROWID, but still it
continued giving us the same error. We also synchronized the characterset of Oracle 10g and Oracle 11g
installations but still it did not work.
Our base table size is pretty large (over 10 Million records) and if we do a full refresh, it takes hours to
refresh it.
Without incremental refresh, we will not be able to fucntion, and to upgrade both database simultaneously
we will need a large down-time which also we can not afford.
Please advise what should we do.
Best Regards
Madhup
Edited by: Madhup on Mar 2, 2009 10:45 AM

Hello,
Yesterday I met the same problem and very sad about this, however, my story is much more complicated (I think so).
I have 6 databases:
2 - 11g
2 - 10g
2 - 9i
Every database of each release has different characterset(UTF8 and AL16UTF16).
I am trying to create Materialized view with FAST REFRESH on Oracle 11g, when master tables are located on 10g database and 9i database.
Materialized view, which points to 9i database, was successfully created.
Materialized view, which points to 10g database, gets ORA-12028
Like you, I tried many notes from METALINK and thought at the begining that the problem is my characterset. But, when the materialized views were successfully built on Oracle 9i database, I understood that the problem is something else.
Did you find the actual reason why this issue does not work??
Thanks,
Alex

Problems while creating a project from a war file...

Hi there, I created a new project in jDev 10.1.3 from a war file that contains a web site that originally ran on TomCat. The problem is that my web.xml file does not contain any information about the servlets that I have in the war file. So when I try running a servlet, I always get an error.
Is there a way to bypass the need to declare every single servlet I have in the web.xml file? If not, are there tools that exist that I could use to do this automatically?
Thanks

Hi,
You can try the following:
1. Give the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Check if your WAS and JDI are on a higher SP level. If yes then use the corresponding NWDS.
Regards,
Satyajit.

Problem in creating selection screen from screen painter

hi ,
      i am working with screens i have created a screen and in that wehn i click report button it has to ask for select options for dates.from there i will write a select quesry based on selection dates ...how to call a selection screen from screen.i created an include and in that include i used select options.but it is showing error message .guide me how to do it ?

Hi..
Here for your problem,
I have created a button with function code 'CLICK' in screen no 1000.
when I click on the button I am capturing the ok_code and displaying the selection screen.
ok_code = sy-ucomm.
case:ok_code.
when 'CLICK'.
         SELECTION-SCREEN BEGIN OF SCREEN 500 TITLE title.
         SELECT-OPTIONS: P_DATE for sy-datum.
         SELECTION-SCREEN END OF SCREEN 500.
title = 'Input Date'.
CALL SELECTION-SCREEN '0500'.
endcase.
You can also have them as subscreen by providing the required parameters in the selection screen.
Hope this solves your problem.
Warm Regards,
Bhuvaneswari.

Problem in Creating Sales Order From One DB to another DB

Hello All,
I am trying to create a Sales Order in another database from the current database based on the Purchase Order but while creating the sales order system is throwing an error " In "To Whse" enter valid values [ZAPp 0] "
My Code for Creating Sales Order in another DB are as follows :-
             '==== Connect To another SAP Company ====='
            '=====================================
            Dim oCompany_DB As New SAPbobsCOM.Company
            oCompany_DB.Server = "OSL_SERVER"
            oCompany_DB.LicenseServer = "OSL_SERVER"
            oCompany_DB.UseTrusted = False
            oCompany_DB.CompanyDB = Database_Name
            oCompany_DB.UserName = SAPUserName
            oCompany_DB.Password = SAPPassword
            oCompany_DB.DbUserName = DBUserName
            oCompany_DB.DbPassword = DBPassword
            oCompany_DB.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
            lRetCode = oCompany_DB.Connect()
            If lRetCode <> 0 Then
                oCompany_DB.GetLastError(lErrCode, sErrMsg)
                If (lErrCode <> -4006) Then
                    Class_InterCmp_Main.SBO_Application.MessageBox(sErrMsg)
                End If
            End If
'===== Creating the Sales Order ====='
'================================
Dim oOrder As SAPbobsCOM.Documents = oCompany_DB.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
            Dim DocDueDate As String = oRecord.Fields.Item("DocDueDate").Value
            oOrder.DocDueDate = DocDueDate
            oOrder.CardCode = Customer
While Not oRecord.EoF
                Dim ItemCode As String = oRecord.Fields.Item("ItemCode").Value
                Dim WhsCode As String = oRecord.Fields.Item("WhsCode").Value
                Dim Quantity As Double = oRecord.Fields.Item("Quantity").Value
                Dim Price As Double = oRecord.Fields.Item("Price").Value
                Dim Discnt As Double = oRecord.Fields.Item("DiscPrcnt").Value
                Dim TaxCode As String = oRecord.Fields.Item("TaxCode").Value
                oOrder.Lines.ItemCode = ItemCode
                oOrder.Lines.WarehouseCode = WhsCode
                oOrder.Lines.Quantity = Quantity
                oOrder.Lines.Price = Price
                oOrder.Lines.DiscountPercent = Discnt
                oOrder.Lines.TaxCode = TaxCode
                oOrder.Lines.Add()
                oRecord.MoveNext()
            End While
            lRetCode = oOrder.Add
            '=== Check For Error if any ===='
            If lRetCode <> 0 Then
                oCompany_DB.GetLastError(lErrCode, sErrMsg)
                If (lErrCode <> -4006) Then
                    Class_InterCmp_Main.SBO_Application.MessageBox(sErrMsg)
                End If
            End If
            oCompany_DB.Disconnect()
When i execute the above code company gets connected but sales order not getting added in another company.
Thanks,
Amit

You can not do it the alternate way Kevin suggests, direct DB inserts are prohibited by SAP and can corrupt your DB, particularly because unlike what most people think, all SAP documents affect more than just their own tables (e.g. the numbering table, the history tables).
Are you getting any error message, or is it returning 0?
If it is returning 0, then check is the document actually going to the newly created database or maybe somehow going to old one.
If it isn't returning 0, what is the error code and message.
Edit:
Also I do see an error in your code. As it stands, you are adding an empty line to the end of every order. This can cause problems for SAP.
Dim counter As Integer = 0
If counter <> 0 Then 'Not equals 0, forum hides lt & gt symbols.
oOrder.Lines.Add()
End If
counter = counter + 1
oOrder.Lines.ItemCode = ItemCode
oOrder.Lines.WarehouseCode = WhsCode
oOrder.Lines.Quantity = Quantity
oOrder.Lines.Price = Price
oOrder.Lines.DiscountPercent = Discnt
oOrder.Lines.TaxCode = TaxCode
Edited by: njmog1 on May 9, 2011 10:14 AM

Updation problem while creating multiple objects from enterprise portal

Hi All,
From enterprise portal i am calling an RFC 'BAPI_PROJECT_MAINTAIN' to create objects .
While trying to create multiple objects simultaneously it gives error "sapuser is currently using, can't be created".
It seems like as i am creating multiple objects by calling RFC repeatedly , while the first one is not updated fully i am sending the second value to be processed.
Pl. tell me how to overcome this. Do I need to add any sleep time in EP or any other method is there in SAP to overcome this situation.
thanks
sandeep

Dear Sandeep,
I have discussed this problem with EP team lead in my organisation, i have given your email id to him he will forward the solution on your id.
If usefull reward points helpfull....
Regards,
Rajneesh Gupta

Problem in Creating excel file from internal table

Hi Experts,
            here iam having a proble with creating an excel file from an internal table which is having around 15 records, when iam generating an excel file, its getting only upto 255 chars, after that its breaking and new record is being started in the next row. how should i get all the contents in one row of the excel or may be extended to the next line , how to resolve this issue, can anyone give me some idea or sample code.
Thanks & Regards,
poorna

ur downloading to excel using a single field...then it will download only 255 chars....may be from internla table u can download the fields and the excel sheet gets downloaded with data....check below code....
*& Report ZETA_EXCEL_DOWNLOAD_CLIPBOARD                               *
report zeta_excel_download_clipboard           .
include ole2incl.
data: w_cell1     type ole2_object,
       w_cell2     type ole2_object.
*--- Ole data Declarations
data: h_excel     type ole2_object,        " Excel object
      h_mapl      type ole2_object,        " list of workbooks
      h_map       type ole2_object,        " workbook
      h_zl        type ole2_object,        " cell
      h_f         type ole2_object,        " font
      gs_interior type ole2_object,        " Pattern
      worksheet   type ole2_object,
      h_cell      type ole2_object,
      h_cell1     type ole2_object,
      range       type ole2_object,
      h_sheet2    type ole2_object,
      h_sheet3    type ole2_object,
      gs_font     type ole2_object,
      flg_stop(1) type c.
          Internal table Declaration
data: begin of t_excel occurs 0,
vkorg(20) type c, "Sales Org
vbtyp(20) type c, "Document Category
auart(20) type c, "Document Type
ernam(20) type c, "Created By
vbeln(20) type c, "Document Number
posnr(20) type c, "Item Number
erdat(20) type c, "Created Date
vdatu(20) type c, "Header Requested Delivery Date
reqdat(20) type c, "Request date
condat(20) type c, "Confirm date
lifsk(20) type c, "Header Block
txt30(30) type c, "Order User Status Description
lifsp(20) type c, "Line Block
dispo(20) type c, "MRP Controller
dsnam(20) type c, "MRP Controller Description
vmsta(20) type c, "Material Sales Status
kunnr(20) type c, "Sold To
cname(35) type c, "Sold To Name
regio(20) type c, "State
cufd(10) type c, "CUD
bstnk(20) type c, "PO#
bsark(20) type c, "Ordering Method
matnr(20) type c, "Material
maktx(35) type c, "Material Description
t200(20) type c, "T200
vtext(20) type c, "T200 Description
matkl(20) type c, "Material Group
zzbomind(7) type c, "BOM Indicator
ostat(20) type c, "Order Status
cmgst(20) type c, "CRD
inco1(20) type c, "Incoterms
oqty(20) type c, "Order Quantity
pqty(20) type c, "Open Quantity
unit(20) type c, "UOM
onet(20) type c, "Order Value
pnet(20) type c, "Open Value
curr(20) type c, "Currency key
so_bezei like tvkbt-bezei,"Sales Office
sg_bezei like tvgrt-bezei,"Sales Group
bname(20) type c, "Ordering Party
contact(20) type c, "Contact Name
telf1(20) type c, "Contact telf1
reqqty(20) type c, "Item Request qty
reqval(20) type c, "Item Request value
conqty(20) type c, "Item Confirm qty
conval(20) type c, "Item Confirm value
zzrev(02) type c, "Revenue recognition acceptance
bezei(20) type c, "Revenue recognition text
vgbel(20) type c, "Reference Order for RETURNS
0008text(255) type c, "Internal Order Comment Text
end of t_excel.
data: t_excel_bckord like t_excel occurs 0 with header line,
      t_excel_bcklog like t_excel occurs 0 with header line,
      t_excel_blkord like t_excel occurs 0 with header line.
types: data1(1500) type c,
         ty          type table of data1.
data: it          type ty with header line,
it_2          type ty with header line,
it_3          type ty with header line,
         rec         type sy-tfill,
         deli(1)     type c,
         l_amt(18)   type c.
data: begin of hex,
         tab type x,
        end of hex.
field-symbols: <fs>      .
constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
M A C R O Declaration
define ole_check_error.
if &1 ne 0.
    message e001(zz) with &1.
    exit.
endif.
end-of-definition.
t_excel_bckord-vkorg = 'ABC'.
t_excel_bckord-vbtyp = 'DEF'.
t_excel_bckord-auart = 'GHI'.
t_excel_bckord-ernam = 'JKL'.
t_excel_bckord-vbeln = 'MNO'.
t_excel_bckord-0008text = 'XYZ'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC1'.
t_excel_bckord-vbtyp = 'DEF1'.
t_excel_bckord-auart = 'GHI1'.
t_excel_bckord-ernam = 'JKL1'.
t_excel_bckord-vbeln = 'MNO1'.
t_excel_bckord-0008text = 'XYZ1'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC2'.
t_excel_bckord-vbtyp = 'DEF2'.
t_excel_bckord-auart = 'GHI2'.
t_excel_bckord-ernam = 'JKL2'.
t_excel_bckord-vbeln = 'MNO2'.
t_excel_bckord-0008text = 'XYZ2'.
append t_excel_bckord.
t_excel_bcklog-vkorg = 'ABC'.
t_excel_bcklog-vbtyp = 'DEF'.
t_excel_bcklog-auart = 'GHI'.
t_excel_bcklog-ernam = 'JKL'.
t_excel_bcklog-vbeln = 'MNO'.
t_excel_bcklog-0008text = 'XYZ'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC1'.
t_excel_bcklog-vbtyp = 'DEF1'.
t_excel_bcklog-auart = 'GHI1'.
t_excel_bcklog-ernam = 'JKL1'.
t_excel_bcklog-vbeln = 'MNO1'.
t_excel_bcklog-0008text = 'XYZ1'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC2'.
t_excel_bcklog-vbtyp = 'DEF2'.
t_excel_bcklog-auart = 'GHI2'.
t_excel_bcklog-ernam = 'JKL2'.
t_excel_bcklog-vbeln = 'MNO2'.
t_excel_bcklog-0008text = 'XYZ2'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC3'.
t_excel_bcklog-vbtyp = 'DEF3'..
t_excel_bcklog-auart = 'GHI3'.
t_excel_bcklog-ernam = 'JKL3'.
t_excel_bcklog-vbeln = 'MNO3'.
t_excel_bcklog-0008text = 'XYZ3'.
append t_excel_bcklog.
t_excel_blkord-vkorg = 'ABC'.
t_excel_blkord-vbtyp = 'DEF'.
t_excel_blkord-auart = 'GHI'.
t_excel_blkord-ernam = 'JKL'.
t_excel_blkord-vbeln = 'MNO'.
t_excel_blkord-0008text = 'XYZ'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC1'.
t_excel_blkord-vbtyp = 'DEF1'.
t_excel_blkord-auart = 'GHI1'.
t_excel_blkord-ernam = 'JKL1'.
t_excel_blkord-vbeln = 'MNO1'.
t_excel_blkord-0008text = 'XYZ1'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC2'.
t_excel_blkord-vbtyp = 'DEF2'.
t_excel_blkord-auart = 'GHI2'.
t_excel_blkord-ernam = 'JKL2'.
t_excel_blkord-vbeln = 'MNO2'.
t_excel_blkord-0008text = 'XYZ2'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC3'.
t_excel_blkord-vbtyp = 'DEF3'..
t_excel_blkord-auart = 'GHI3'.
t_excel_blkord-ernam = 'JKL3'.
t_excel_blkord-vbeln = 'MNO3'.
t_excel_blkord-0008text = 'XYZ3'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC4'.
t_excel_blkord-vbtyp = 'DEF4'..
t_excel_blkord-auart = 'GHI4'.
t_excel_blkord-ernam = 'JKL4'.
t_excel_blkord-vbeln = 'MNO4'.
t_excel_blkord-0008text = 'XYZ4'.
append t_excel_blkord.
loop at t_excel_bckord.
concatenate
t_excel_bckord-vkorg
t_excel_bckord-vbtyp
t_excel_bckord-auart
t_excel_bckord-ernam
t_excel_bckord-vbeln
t_excel_bckord-posnr
t_excel_bckord-erdat
t_excel_bckord-vdatu
t_excel_bckord-reqdat
t_excel_bckord-condat
t_excel_bckord-lifsk
t_excel_bckord-txt30
t_excel_bckord-lifsp
t_excel_bckord-dispo
t_excel_bckord-dsnam
t_excel_bckord-vmsta
t_excel_bckord-kunnr
t_excel_bckord-cname
t_excel_bckord-regio
t_excel_bckord-cufd
t_excel_bckord-bstnk
t_excel_bckord-bsark
t_excel_bckord-matnr
t_excel_bckord-maktx
t_excel_bckord-t200
t_excel_bckord-vtext
t_excel_bckord-matkl
t_excel_bckord-zzbomind
t_excel_bckord-ostat
t_excel_bckord-cmgst
t_excel_bckord-inco1
t_excel_bckord-oqty
t_excel_bckord-pqty
t_excel_bckord-unit
t_excel_bckord-onet
t_excel_bckord-pnet
t_excel_bckord-curr
t_excel_bckord-so_bezei
t_excel_bckord-sg_bezei
t_excel_bckord-bname
t_excel_bckord-contact
t_excel_bckord-telf1
t_excel_bckord-reqqty
t_excel_bckord-reqval
t_excel_bckord-conqty
t_excel_bckord-conval
t_excel_bckord-zzrev
t_excel_bckord-bezei
t_excel_bckord-vgbel
t_excel_bckord-0008text
into it
separated by deli.
append it.
    clear it.
endloop.
loop at t_excel_bcklog.
concatenate
t_excel_bcklog-vkorg
t_excel_bcklog-vbtyp
t_excel_bcklog-auart
t_excel_bcklog-ernam
t_excel_bcklog-vbeln
t_excel_bcklog-posnr
t_excel_bcklog-erdat
t_excel_bcklog-vdatu
t_excel_bcklog-reqdat
t_excel_bcklog-condat
t_excel_bcklog-lifsk
t_excel_bcklog-txt30
t_excel_bcklog-lifsp
t_excel_bcklog-dispo
t_excel_bcklog-dsnam
t_excel_bcklog-vmsta
t_excel_bcklog-kunnr
t_excel_bcklog-cname
t_excel_bcklog-regio
t_excel_bcklog-cufd
t_excel_bcklog-bstnk
t_excel_bcklog-bsark
t_excel_bcklog-matnr
t_excel_bcklog-maktx
t_excel_bcklog-t200
t_excel_bcklog-vtext
t_excel_bcklog-matkl
t_excel_bcklog-zzbomind
t_excel_bcklog-ostat
t_excel_bcklog-cmgst
t_excel_bcklog-inco1
t_excel_bcklog-oqty
t_excel_bcklog-pqty
t_excel_bcklog-unit
t_excel_bcklog-onet
t_excel_bcklog-pnet
t_excel_bcklog-curr
t_excel_bcklog-so_bezei
t_excel_bcklog-sg_bezei
t_excel_bcklog-bname
t_excel_bcklog-contact
t_excel_bcklog-telf1
t_excel_bcklog-reqqty
t_excel_bcklog-reqval
t_excel_bcklog-conqty
t_excel_bcklog-conval
t_excel_bcklog-zzrev
t_excel_bcklog-bezei
t_excel_bcklog-vgbel
t_excel_bcklog-0008text
into it_2
separated by deli.
append it_2.
    clear it_2.
endloop.
loop at t_excel_blkord.
concatenate
t_excel_blkord-vkorg
t_excel_blkord-vbtyp
t_excel_blkord-auart
t_excel_blkord-ernam
t_excel_blkord-vbeln
t_excel_blkord-posnr
t_excel_blkord-erdat
t_excel_blkord-vdatu
t_excel_blkord-reqdat
t_excel_blkord-condat
t_excel_blkord-lifsk
t_excel_blkord-txt30
t_excel_blkord-lifsp
t_excel_blkord-dispo
t_excel_blkord-dsnam
t_excel_blkord-vmsta
t_excel_blkord-kunnr
t_excel_blkord-cname
t_excel_blkord-regio
t_excel_blkord-cufd
t_excel_blkord-bstnk
t_excel_blkord-bsark
t_excel_blkord-matnr
t_excel_blkord-maktx
t_excel_blkord-t200
t_excel_blkord-vtext
t_excel_blkord-matkl
t_excel_blkord-zzbomind
t_excel_blkord-ostat
t_excel_blkord-cmgst
t_excel_blkord-inco1
t_excel_blkord-oqty
t_excel_blkord-pqty
t_excel_blkord-unit
t_excel_blkord-onet
t_excel_blkord-pnet
t_excel_blkord-curr
t_excel_blkord-so_bezei
t_excel_blkord-sg_bezei
t_excel_blkord-bname
t_excel_blkord-contact
t_excel_blkord-telf1
t_excel_blkord-reqqty
t_excel_blkord-reqval
t_excel_blkord-conqty
t_excel_blkord-conval
t_excel_blkord-zzrev
t_excel_blkord-bezei
t_excel_blkord-vgbel
t_excel_blkord-0008text
into it_3
separated by deli.
append it_3.
    clear it_3.
endloop.
if h_excel-header = space or h_excel-handle = -1.
start Excel
    create object h_excel 'EXCEL.APPLICATION'.
endif.
PERFORM err_hdl.
*--- get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
set property of h_excel 'Visible' = 1.
add a new workbook
call method of h_mapl 'Add' = h_map.
PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Back Orders'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
        data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
PERFORM err_hdl.
CALL METHOD OF h_excel 'QUIT'.
*GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Backlog'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it_2[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*GV_SHEET_NAME = '3rd SHEET'.
gv_sheet_name = 'Blocked Orders'.
get property of h_excel 'Sheets' = h_sheet3 .
call method of h_sheet3 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it_3[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*--- disconnect from Excel
free object h_zl.
free object h_mapl.
free object h_map.
free object h_excel.

Problem while creating an OU from LDAP client, in Oracle Virtual Directory

Hi,
1. I have created a Custom Adapter with root (i.e. dc=mycompany,dc=co,dc=in)
2. Trying to create an "OU" under these above root (i.e. ou=test,dc=mycompany,dc=co,dc=in) using the LDAP client.
I have given following inputs for the second step:
Dn: ou=test,dc=mycompany,dc=co,dc=in
ou=test
objectClass: top
objectClass: organizationalunit
When I try to perform second step with above inputs its gives following error
"LDAP Error 32 : No Such Object"
Same inputs is valid for SunONE directory server.
Is the above approach is valid for Oracle Virtual Directory?
Does any one faced same problem before?
Regards,
Hardew

You're going to have to install the Oracle client on the Win2000 box before doing anything else. Once you've done that, simply add a TNS name that points to the database on the Solaris box (the Net8 Configuration Assistant) can walk you through this. Finally, you'll go to the ODBC Data Source Administrator and create a new DSN.
Note that if you install the latest ODBC driver, the 'service name' text box that you have to fill in when you actually create the DSN has been replaced with a combo box, which should make the process a little easier.
Justin

Problem with creating a collection from query

This is driving me nuts. What I am trying to do is create a collection but the sql to create it is produced dynamically. The query I want to end up with in this example is -
select pr.code,pr.description, max(decode(pe.period_beginning,'01-NOV-08',fe.effort,0)) NOV_08,1 NOV_08_PERIOD_ID, max(decode(pe.period_beginning,'01-DEC-08',fe.effort,0)) DEC_08,21 DEC_08_PERIOD_ID, max(decode(pe.period_beginning,'01-JAN-09',fe.effort,0)) JAN_09,22 JAN_09_PERIOD_ID, max(decode(pe.period_beginning,'01-FEB-09',fe.effort,0)) FEB_09,41 FEB_09_PERIOD_ID, max(decode(pe.period_beginning,'01-MAR-09',fe.effort,0)) MAR_09,81 MAR_09_PERIOD_ID from forecast_projects pr,forecast_periods pe,forecast_effort fe
where pr.id=fe.project_id(+)
and pe.id(+)=fe.period_id group by pr.code,pr.description order by pr.code
but the list of dates within single quotes are derived from some pl/sql which pulls them from a table.
So my pl/sql looks like this -
begin
if apex_collection.collection_exists(p_collection_name=>'KEANEFORECAST') then
apex_collection.delete_collection(p_collection_name=>'KEANEFORECAST');
end if;
declare
l_period date;
l_period_id number := 0;
l_query varchar2(1400) := '';
l_query_start varchar2(1400) := 'select pr.code,pr.description,';
l_query_part1 varchar2(1400) := ' max(decode(pe.period_beginning,''';
l_query_part2 varchar2(1400) := ''',fe.effort,0)) ';
l_query_end varchar2(1400) := ' from forecast_projects pr,forecast_periods pe,forecast_effort fe
where pr.id=fe.project_id(+)
and pe.id(+)=fe.period_id group by pr.code,pr.description order by pr.code';
begin
for c1 in (
select id,period_beginning into l_period_id,l_period
from forecast_periods order by 1) loop
l_query := l_query || l_query_part1 || c1.period_beginning || l_query_part2 ||
replace(substr(c1.period_beginning,4),'-','_') || ',' || c1.id || ' ' ||
replace(substr(c1.period_beginning,4),'-','_') || '_PERIOD_ID,';
end loop;
l_query := substr(l_query,0,length(l_query)-1);
l_query := l_query_start || l_query || l_query_end;
dbms_output.put_line(l_query);
apex_collection.create_collection_from_query(
p_collection_name=>'KEANEFORECAST',
p_query=> l_query);
end;
end;
Now what happens is that the query is produced perfectly - the dbms_output.put_line gives me the exact query as quoted at the top of my posting, and if I run it I get the desired results. If I run this whole block of pl/sql it also works absolutely fine and my collection is created - great.
However if I put this pl/sql into an onLoad Before Header block then when I try to run the page I get the following -
ORA-20104: create_collection_from_query Error:ORA-20104: create_collection_from_query ParseErr:ORA-00923: FROM keyword not found where expected
I think it is getting in a mess with the quotes in the query, but I do not know why and I have been racking my brains to think of a workaround. It's odd that it works fine if I run it standalone in the SQL Commands tab but not as a page process.
I'd be really grateful for any advice/pointers here.
Thanks in advance.

You are an absolute star - thank you! What this enabled me to do was to see the query being produced - which was showing it different to that which dbms_output.put_line reported - no idea why this should be. Anyway this allowed me to correct a couple of things which then enabled it all to work.
The thing that showed as different was the representation of a date field - dbms_output.put_Line was showing this in DD-MON-YYYY format whereas the debug showed it with a timestamp portion.
Thank you again.

Problem in creating a PO from SOCO

Similar Messages

Maybe you are looking for