Problem in creating text file from report file

Hello Everybody...
I have problem in creating text file.
I had set System Parameter as below
DESTYPE : File
MODE : Character
DESNAME : gayu.txt
And ruler setting
Units : Character Cells
Character Cell Size : Horiziontal = 7
Vertiacle =12
GridSpacing : 1
no of snap points per grid spacing : 1
but when i run report it will give error
"REP_1219 M_2 or R_2 has no size -- length or width zero"
so is there any solution of that
or another way to convert report into text file?....

Hi Folks,
Please don't go after that Error as its a very deceptive one. Please don't go for altering your design Or changing the size of items in your layout.
Similar errors I have come across in reports. I think its due to file transfer type. You might have transferred the file in Binary and your File Mode I am seeing it as CHAR.
This normally happens while making the Report Format as "Text". Either you change that format which I think is possible in your case as your basic requirement is making a report output of CHAR type.
Please check for this error in Metalink and proceed accordingly. I could fix similar errors when I changed Format type to PDF(from text).
Regards
Shibu

Similar Messages

Create multiple PDFs from multiple files

Hi everyone
I'm trying to use the "Create multiple PDFs from multiple files" function in Acrobat 9 Pro (version 9.4.6) to create about 100 PDFs from InDesign CS5 files. Theoretically this would do the trick for my purpose. BUT: When running the function, it does not use the CS5 InDesign (version 7.0.3), but tries to open the files with InDesign CS3. Of course this does not work. We, as a professional working agency, have installed CS3, CS4 and CS5. Even with making the InDesign CS3 .app invisible an pushing it into the garbage bin during the process did not work. Acrobat still wants to access InDesign CS3. It is not possible to downgrade the files to CS3 files, for there are special (i.e. interactive) functions which only work in CS5. It would be more work than creating the PDFs manually, anyways.
Does anyone have similar issues? Any ideas how to solve the problem?
Thanks in advance.
Thinka

OK, cool, I found one, which seems to work just fine.
http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
found here:
http://forums.adobe.com/message/3712434#3712434
Thanks for the hint!

I can't create PDF files from DWF files

I'm looking for a solution for creating PDF files from DWF files. When I attempt to create a DWF file to PDF, the file has problems being created. Does anyone have a solution to this?

We are trying to print to pdf format from a dwf (Autodesk Design Review) drawing file. DWF is autodesk’s version of PDF. In autocad, you can print to either dwf or pdf. However, some of the fonts within autocad are not recognized by adobe so the fonts often don’t print properly. Thus, we print to dwf first, then print again to pdf.
We operate 2 basically identical computers; the one computer is able to print from dwf to pdf and the other is not. When I say not able, only part of the drawing actually prints; like it is not able to process the data. The computer that cannot print from dwf to pdf, can actually print directly to pdf from Autocad. It just cannot print from dwf to pdf.
Both computers are running Windows 7, Autocad Architecture 2015, and Adobe acrobat X.
Let me know if this is enough information.

How to create JSF application from xsd files?

Hi,
We have many xsd files describing xml's which we are supposed to send to web services. Application which we are creating should allow user to fill xml documents with data and then we should send those xml files to some web service. We want to automatize as much as possible the process of application creation to avoid possible errors and to minimize our efforts (there are plenty of quite complex xsd files).
Our first approach was: we used Oracle JSXB to generate java classes basing on xsd files (using JDeveloper 10.1.3.2.0.4066). Then we tried to generate DataControls, but this action fails with following error:
Window title: Error in init bean
Message: Could not complete initbean because it would result in an invalid document
Details: oracle.bali.xml.model.XmlInvalidOnCommitException: SEVERE: Wartość atrybutu Name nie jest typu ID (Value of Name attribute is not of ID type)
Wartość musi być następującego typu: (Value must be of following type)
Nazwa typu: ID (Type name)
Typ pierwotny: string (Primitive type)
Z następującymi więzami: (With following constraints)
zgodne z wzorcem: [\i-[:]][\c-[:]]* (Compliant with template)
[ node = Name ]
<JavaBean version="10.1.3.40.66" id="XSLStylesheet" BeanClass="oracle.xml.xslt.XSLStylesheet" Package="oracle.xml.xslt" isJavaBased="true">
<Attribute Name="classMethodParams" IsUpdateable="0" Type="java.util.Hashtable" />
We tried Sun implementation fo JAXB - it generated different java classes (with annotation mechanism). Creation of DataControls using those classes was successful. Then we created simple JSF page and tried to put those DataControls on it in order to let the user fill it with data. The thing is that those controls are read only as there is no row created in those DC. We can't create any row in those DC as there are only 'commit' and 'rollback' operations. When we try to call 'CreateInsert' operation on child elements of those DC we get error in JDeveloper log window:
2007-05-29 10:08:46 oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: JBO-29000: DataControl:createRowData
2007-05-29 10:08:46 oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: DataControl:createRowData
new row is not created and controls are still read-only.
The question is:
1. is there another, more efficient way to create JSF application from xsd files?
2. if this is the best way to do it, what do we do wrong?
Leszek

To anyone who might find it useful: our solution to mentioned problem.
Few tips how to solve described problem:
1. Do not use JAXB (we checked Oracle and Sun)
2. Use castor http://www.castor.org/
a) for each xsd generate java files in separated package
b) use java 1.5 to let castor generate lists
c) use mapping of xml namespaces to java packages to have only 1 implementation of each xsd
3. Create facades - java files for you root-level java objects
4. Right click those facades and choose 'Create DataControl' in jdev
5. Now you may drag and drop you DataControls and use them in your JSF (or UIX) application
I hope it will help someone :)
Leszek

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Acrobat 11 doesn't create pdf. files from doc. files

I tried to create a pdf. file from a doc. file (Office 2003). Acrobat 11 instead opens a warning message with the following contents (translated from German):
A high security level has been chosen. Start the application that created the document, activate the dialogue "safety warning", choose "always trust macros from this resource, activate ... from Adobe Systems Inc. (the message aborts there).
I selected "Extras/Macro/Safety/Safety level" , there I selected "low". The above mentioned message still comes up.
What do you suggest to do in order to finally create pdf. files from doc. files?
Additional information: Creating pdf. files from xls. files (Excel), txt. files (Editor) and saving a webpage as a pdf. file all work fine.
Thanks for your input!

Although Office 2003 is old compared to Acrobat XI, according to Compatible web browsers and PDFMaker applications it should work, though support has passed end of life.
So my first test (if it were me) would be to see if PDFMaker works if run in the simplest way (the only way I ever use it, this right click conversion stuff isn't in my worldview). That is, does the Acrobat menu appear in Word and does it work? If it does not work, no other method based on it can work.

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

Creating Target Group from External File

Hello Experts
We need to create target group from external file. (That is to say we will have let's say txt file containing BP that belongs to specific target group and we need to assign these BPs to to specific target group in SAP CRM)
I have searched for it on sdn and found something benefical. I have found BAPI_TARGETGROUP_CREATE, I have checked it but I don't understand how should we use it becuase as far as we understand it just creates target group, we cannot see anything related with Business Partner. How can we relate BPs with the target group we create by this BAPI.
What should we do, is anyone have previous experience about it? or is there a way to do it without using BAPI.
thanks it advance
M.
Edited by: Mehmet Ergul on Jan 22, 2009 11:19 AM

Hi,
You can do this from within the standard Web UI. It's straight out of the box.
Create a profile set and in there create a target group in the target group assignment block just by entering the description of the target group. Then enter edit mode of this target group and click the button "Import Members". Remeber to mark "Change selected target group" unless you want to create a new target group.
/Anders

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

Create still images from video files?

from http://gadgetwise.blogs.nytimes.com/2009/04/16/5-new-photoshop-tips-for-photographers/ , "You can now preview video in Bridge and create still images from video files."
I just installed the 5.4 Camera Raw Update.
I can preview the AVI files from my Nikon D5000, but have not figured out how I might create a still image ( other than stopping the movie, and dragging to copy ) Have tried searching adobe, this forum, have not found more info ion this.

Stop the video at the desired point, press the Shift, Command, and 4 keys, drag the cursor so that the whole picture is highlighted, let go of the button, and open the PNG on the desktop.
(35300)

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Problem in creating text file from report file

Similar Messages

Maybe you are looking for