Problem in creating a textfile using FCC in Receiver Comm. Channel

Dear experts,
I have a problem creating a flat file using file content conversion in PI.
My target XML structure looks like this:
1..1
1..n
1..1
1..n
1..1
The mapping itself goes fine, result in XML looks OK.
But I need to create a flat textfile that looks like this:
Fileheader
Invoiceheaderdata1
Invoicedetaildata1
Invoicedetaildata2
Invoiceheaderdata2
Invoicedetaildata1
Invoicedetaildata2
Invoicedetaildata3
Filetrailer
How do i configure the FCC in the receiving communication channel? I keep getting an error with the invoicedetaildata node.
Thanks in advance
William

Can you provide us with the receiver communication channel parameters and along with that the errors received?
Regards
Indranil

Similar Messages

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

Problem in Creating the Product Using COM_PRODUCT_MAINTAIN_MULT_API

Dear CRMExperts,
I am working in SAP CRM 5.0 version.I want to create the Product Using the Function Module "COM_PRODUCT_MAINTAIN_MULT_API".For this i have gone through the SAP Note 810153.I copied the Report Program from that note and i developed the Report Program.but i am facing some problem.
The structures zinstall_info2_maint_t and zinstall_info2_maintain does not exist in SAP CRM 5.0 Version.So i am getting Short Dump.
If anyone come across the same problem.Please help me to solve this issue.Please help me it is very Urgent.
Thanks & Regards,
Ashok.

Hi,
Note 1074357 - Implementing rollback in FM COM_PROD_MATERIAL_MAINTAIN_API
Does this help you?
regards,
Murali

Problem in creating new field using AET

Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo       = is_key-ext_bo
                                                                          ext_bo_part = is_key-ext_bo_part
                                                                          extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PM

Hi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode.

Problem while creating service PO using bapi_po_create1

hi all,
i am getting error :
In case of account assignment, please enter acc. assignment data for item
what does this mean?
please help,,
thanks,
Siddhartha Prakash

Hi Sid.
I'm having this same problems on creating PO Service. Did you solve it? How did you do that?
I'm using a PR and the Category is 'Y', and I cant find where is the problem.
The tables that I'm passing to the BAPI_PO_CREATE1 are:
POITEM/ POITEMX
POACCOUNT/ POACCOUNTX
POSERVICES
POSRVACCESSVALUES
Please, if you have any idea, let me know!
Tks a lot!
Renata

Problem in Creating the Transport using Export option on Portal

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

Problem in Creating a view using infotypes PA0001,PA0002,...

Hi,
Can anybody please help me how to create a Maintainence view using PA0001,PA0002,PA0003,PA0006,PA0032.
I tried to create it using se54.
when i use PA0003 as check table, i am not able to create relations with PA0001,PA0002,PA0032,PA0006.
Thanks in Advance.
Vinay.BR

You can create a view using SE11 as mentioned in the previous answer. Once you created, you can use SE16 to display the content of the view table. However, this does not serve much because you can also see the original table using SE16. Unless you want to generate screen dialog so that the view table can be used in SM30. This method can be done while editing the table in SE11. Click on Utilities->Table maintenance generator. However, this will be considered as a repair (modification to SAP standard) and you need repair key.

Problem in creating program dynamically using FM 'rss_template_instantiate'

hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.

hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.

Problem while creating partner link using https URL

Hi,
To create the partnerlink using https URL, I had done the following:
-Imported the self signed certificate into the OraBPELPM_\jdk\jre\lib\security\cacert
-Added following entries in OraBPELPM_1\integration\jdev\jdev\bin\jdev.conf
AddVMOption -Djavax.net.ssl.keyStore=E:\OraBPELPM_1\jdk\jre\lib\security\cacert
AddVMOption -Djavax.net.ssl.keyStorePassword=esbtest123
I am not able to create partner link using URL https://localhost/orabpel/default/ErrorHandlerBPEL/1.0/ErrorHandlerBPEL?wsdl .
Able to create partnerlink using same URL if I replace https with http.
Did I miss any other configuration that needs to done to create partnerlink using https in JDeveloper BPEL Designer.
Thanks,
-Vidya

Hi,
I too have the same issue. Appriciate if you share some knowledge on this issue.
Thanks
Aravinda

Problem with creating customer account using TCA Java API

Hi,
I am trying to create customer account using TCA java API. i am getting exception saying PL/SQL numeric error: character to number conversion. but this error raises when calling API method
HzCustAccountV2Pub.createCustAccount.
can any body help me in solving this issue, any clue why this exception raises. i have tested even the code given in TCA API user guide. that code also gets same error.

package client;
import java.math.BigDecimal;
import java.sql.Timestamp;
import java.sql.DriverManager;
import java.sql.SQLException;
import oracle.jdbc.driver.OracleConnection;
import oracle.jdbc.driver.OracleCallableStatement;
import oracle.jdbc.driver.OracleTypes;
import oracle.apps.ar.hz.v2api.HzCustAccountV2Pub;
import oracle.apps.ar.hz.v2api.HzPartyV2Pub;
import oracle.apps.ar.hz.v2api.HzCustomerProfileV2Pub;
class CreateCustAccount {
     public static void main(String[] args) throws Exception {
     HzCustAccountV2Pub.CustAccountRec p_cust_account_rec = new HzCustAccountV2Pub.CustAccountRec();
     HzPartyV2Pub.PersonRec p_person_rec = new HzPartyV2Pub.PersonRec();
     HzCustomerProfileV2Pub.CustomerProfileRec p_customer_profile_rec = new      HzCustomerProfileV2Pub.CustomerProfileRec();
     BigDecimal[] x_cust_account_id = new BigDecimal[1];
     String[] x_account_number = new String[1];
     BigDecimal[] x_party_id = new BigDecimal[1];
     String[] x_party_number = new String[1];
     BigDecimal[] x_profile_id = new BigDecimal[1];
     String[] x_return_status = new String[1];
     BigDecimal[] x_msg_count = new BigDecimal[1];
     String[] x_msg_data = new String[1];
     try
     Class.forName ("oracle.jdbc.driver.OracleDriver");
     OracleConnection conn = (OracleConnection) DriverManager.getConnection ("jdbc:oracle:thin:@ebiztst.trianz.int:1526:PATCH","apps","apps");
     HzCustAccountV2Pub custaccountV2Pub = new HzCustAccountV2Pub();
     p_cust_account_rec.account_name = "John Ac";
     p_person_rec.person_first_name = "John";
     p_person_rec.person_last_name = "Smith";
     p_cust_account_rec.created_by_module = "TCA_EXAMPLE";
     HzCustAccountV2Pub.createCustAccount(
     conn
     , "T"
     , p_cust_account_rec
     , p_person_rec
     , p_customer_profile_rec
     , "F"
     , x_cust_account_id
     , x_account_number
     , x_party_id
     , x_party_number
     , x_profile_id
     , x_return_status
     , x_msg_count
     , x_msg_data
     System.out.println( "x_return_status = " + x_return_status[0] );
     System.out.println( "x_msg_count = " + x_msg_count[0] );
     System.out.println( "x_msg_data = " + x_msg_data[0]);
     if (x_msg_count[0].intValue() > 1) {
          OracleCallableStatement ocs = null;
          for (int i=0; i<x_msg_count[0].intValue(); i++) {
          ocs = (OracleCallableStatement)conn.prepareCall(
          "begin ? := fnd_msg_pub.get( p_encoded => ’F’ ); end;");
          ocs.registerOutParameter(1, OracleTypes.VARCHAR);
          ocs.execute();
          System.out.println((i + 1) + ". " + ocs.getString(1));
          conn.close();
          } catch (ClassNotFoundException e) {
          System.out.println("Driver Not Found: " + e);
          } catch (SQLException e) {
          System.out.println("SQL Error." + e);
}

Problem in creating work center using bapi

hai all,
i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
" in table T006 entry is missing " . why it is comming like that.

Hi Goutam/Ram,
    I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
   But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
   We are trying to copy Capacities and work center from one plant to other.
Plz send if you any documentation or code. Also send work order creating code.
Thanks in Advance.

Problem in File Receiver comm channel

Hi,
I can't see anything in the Recevier communication channel in the RWB > Component Monitoring>Comm. channel monitoring-->Comm. channels.
I do have selected my comm channel.Its showing the message as "Comm. channel is configured correctly and started". But I cant see msgID and Explanation or error. Even, I cant fine any info in Error log.
The diagnosis i did as follows. Let me know if u come across any thing.
Checked the logs in VA but i didnt found any information and is not upto date. Bad luck
*Recreated the Rcvr comm channel again and teste. Nohope.
In the MONI its showing successfull, but i cant see output at destination.
*cache is uptodate
I have checked the queues, nothing got stuck.All queues are clear.
*I cant restart the Server since it is in production.
Your suggestions are highly appreciated.
Thanks
SRI

Nilesh,
All the things you mentioned are done by XI IS. FYI plz chk below..
Send binary file "/home/dpiadm/xi/tmp/passthru/EDI_250123.rpz", size 60, character encoding 8859_1 with QoS EO
2007-10-19 13:48:43 Success MP: Entering module processor
2007-10-19 13:48:43 Success MP: Processing local module localejbs/SFTPFileUploadDownloadAdapterModule
2007-10-19 13:48:43 Success 192.133.217.6 /XI/SFTPTest pimsp kuljasimsim EDI_250123.rpz /home/dpiadm/SridharRajuMahali /home/dpiadm/xi/tmp/passthru/ EDI_250123.rpz Enable
2007-10-19 13:48:43 Success EDI_250123.rpz
2007-10-19 13:48:43 Success SFTPOutBoundEDIFileToFile
2007-10-19 13:48:43 Success SFTP_Sender_File
2007-10-19 13:48:43 Success 8878c990-7e6b-11dc-8137-001a4b065b86
2007-10-19 13:48:43 Success SFTPServerNameOrIpAddress 192.133.217.6
2007-10-19 13:48:43 Success Indiashining.txt SFTPOutBoundEDIFileToFile SFTP_Sender_File 8878c990-7e6b-11dc-8137-001a4b065b86 SFTPOutBoundEEIFileToFile
UNDEFINED
2007-10-19 13:48:43 Success Host Key Verified
2007-10-19 13:48:43 Success Socket Opened for Transport and connected..
2007-10-19 13:48:43 Success SFTP SshClient is connected
2007-10-19 13:48:43 Success Authentication Method is Public Key
2007-10-19 13:48:43 Success Ssh2 Client is Connected and Authenticated
2007-10-19 13:48:43 Success pimsp kuljasimsim
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success localFolder2 + dropFileName2 /home/dpiadm/xi/tmp/passthru/EDI_250123.rpz
Entering to download file
2007-10-19 13:48:43 Success Current Directory before LCD0 : /home/dpiadm
2007-10-19 13:48:43 Success Current Directory After LCD0 :/home/dpiadm/xi/tmp/passthru
2007-10-19 13:48:43 Success download completed
2007-10-19 13:48:43 Success MP: Processing local module localejbs/CallSapAdapter
2007-10-19 13:48:43 Success Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:43 Success Trying to put the message into the send queue.
2007-10-19 13:48:43 Success Message successfully put into the queue.
2007-10-19 13:48:43 Success The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2007-10-19 13:48:43 Success MP: Leaving module processor
The message was successfully retrieved from the send queue.
2007-10-19 13:48:43 Success Confirmation mode test found. File sent.
2007-10-19 13:48:43 Success The message status set to DLNG.
2007-10-19 13:48:44 Success The message was successfully transmitted to endpoint http://quark:8005/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:44 Success The message status set to DLVD.
2007-10-19 13:48:44 Success The message was successfully delivered.
Note:- I AM NOT ABLE TO SEE ANYTHING IN THE RCVR COMM CHANNEL(RWB).
any Idea about, where can I see the message if it got stuck in Integration server apart from logs
Thanks
Sri Raj

FCC in Receiver Communication Channel

Hi Frnds,
i did FCC for below message , but its not working can any one help me onthis
I want to implement File Content Conversion in receiver communication channel.
DataString is 1:Unbounded
<Records>
<DataString>1234567892222222222222222222222</DataString>
<DataString>4567899998728379023479565222222</DataString>
<DataString>5678903562634730632758579738458</DataString>
</Records>
Flat file format looks like this
234567892222222222222222222222
4567899998728379023479565222222
5678903562634730632758579738458
regards,
Raj

if it is the multiple occurence of the DataString that you want to take care off then refer this blog which deals with a similar approach:
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
regards,
Abhishek.

Problem in creating a textfile using FCC in Receiver Comm. Channel

Similar Messages

Maybe you are looking for