Problem in creating help input for custom infotype creation
Hi,
I had the task of creating a custom infotype for storing recruitment test result.
I created it using the following structure:
Component ______________Data Element
TEST_TYPE______________ZTEST_TYPE
TEST_DATE
LOCATION
PIC_____________________RFPER
EX_PIC
TEST_RESULT____________ZRESULT_TYPE
STATUS_________________ZSTATUS_TYPE
OTHER_POSITION_________PLANS
Now for the component other_position for the entry help i use is H_T528B with check table T528B. My objective is, when the infotype is accessed through pa30 and user is inputting the entry, when they press F4 on the inputbox for other_position, help search should show the list of all position within the system. But rather than that, the input help display such message:
No values selected
Maintain entries?
Yes No Cancel
When I choose yes, the input help suddenly prompt me to "Choose customizing project" which i believe is from SPRO.
How do I fix this problem so that when I press f4, the help will shows all position within the system.
Thanks
not answered, but found another work around
Similar Messages
-
ALE/IDOC-How to create Change Pointers for Custom Infotype
Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
SarikaHi Sarika,
How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
Thanks
Anu. -
Problem in creating include program for customer exit for BC425_01
Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKSHi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK. -
Description for value help field for custom infotype field
Hi,
I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
Regards,
FarhanaHi anji,
While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
Eg:
1-Individual
2-Family
Then the description should be displayed as Family when I select the value 2 from the value help.
Regards,
Farhana. -
Problem to create change pointer for custom message type - Idoc creation
Hi,
We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
Can anybody help / guide?Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal. -
E-Recruiting : Creation of Search Profile for custom infotypes
Dear experts,
Can anyone let me know if you have created search profiles for custom infotypes in eRecruiting?
The requirement is for the TREX to be able to search for Candidates based on the fields which are defined in this custom infotype. This infotype (9999) is completely custom defined mapped to object NA.
In the IMG,
I don't have to change the search profile type
I created a new Z Information category.
Here, i have to specify an extraction class for this Z Information Category.
Can anyone please tell me what this should be? Can i give it as "CL_HRRCF_CEC_INFOTYPE" ?
Also, can anyone please mention the significance of the table "T77RCF_SPT_INFTY " and how we should be handling the entries here for our custom infotype ? Should we create a custom class to specify here? How should we do this ?
Any inputs & thoughts regarding this will be invaluable.
Needless to say, i created the Z information category with the class CL_HRRCF_CEC_INFOTYPE but when i run the report RCF_RECREATE_SEARCH_PROFILE,It is giving me a lot errors.
Please help.
Regards,
SowmyaSowmya,
To answer your question, Yes, automatic generation of NA for newly hired/created PERNR (P) is because of the integration you have activated between PA and eRecruit via BADI implementations. Look at OSS note 997181 for details on how integration works.
If you dont need integration between PA and eRecruit on PA40 then you may have to tweak the BADI's.
regards
Sridhar Kandisetty -
Problem in creating new versions for existing DIR using CV01N
I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.BThere is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110. "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
+**EXPORTING**+
+**is_draw = ls_draw**+
+**TABLES**+
+**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B -
Currency config for Custom Infotype
Hi Guru's,
Can any one guide me how to config the currency for Custom infotypes.
Regards,
ReddyHello,
If I was to do it and under the exposed conditions I would have to make a batch input report that would create a cut in your infotype from the currency change start date and record - convert all previous record to new currency.
There is a few standard program created back when the euro came into play that you could have a look at so to replicate behavior for your custom infotype. Report is RPUEMU00, you could have a look at subroutines PROCESS_INFOTYPE_TABLES, PROCESS_PA0015, or maybe just custom abap logic will suit you better.
Cheers. -
Logical database PNP not retrieving data for custom infotypes.
Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamzasolved
-
Create Service Request for Customer
hi,
can u pls tell me how to create Service Requset for Customer using BAPI??????
regards
Guruhi,
thanks for ur response
how to assign a service request to person who is suitable for service.
(for example customer faced problem with our product so he will make a complaint on that product, i think this is service request , we need to resolve that problem as we assign that service request to some other person who can able to solve .
<b>Am i thinking in Correct way</b>)
i need bapis to ful fill for the above senario
regards
Guru -
How to upload data for custom infotype
Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & RoopaThanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa -
ONT_PROCESS_ORDER module created a site for customer
ONT_PROCESS_ORDER module created a site for customer.
Can anybody please tell me when this module create a new site for the customer ? and why it creates ?
i am new to oracle apps . please help.Please post your query in the relevant Oracle Apps forum.
This is the SQL and PL/SQL forum, and your question is not specific to SQL and PL/SQL. -
T code for custom infotype in PA
Hi
T code for custom infotype in PA.
Regards
SudhaHi Sudha,
PM01 is the tcode.
Similar questions were already answered in the following threads
ABAP HR : Infotype Enhancement
So please search and then post specific queries.
rgds
gayathri -
How to create number range for custom object
Hi all,
I want to create number range for custom object or custom tables
Thanks
HemalathaHi,
Thanks, I am able to create a number range for custom object through SNRO tcode.
Thanks
Hemalatha -
While doing LSMW standard method for Customer master creation..
while doing LSMW standard method for Customer master creation.....
In 13th step I am getting this king of error
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name ZPROJ was opened
FB109 Trans. 1 : Transaction xd01 is not supported
FB016 ... Last header record ...
FB014 ... BKN00-STYPE 1
FB014 ... BKN00-TCODE xd01
FB014 ... BKN00-KUNNR
FB014 ... BKN00-BUKRS
FB014 ... BKN00-VKORG A1
FB014 ... BKN00-VTWEG 00
FB014 ... BKN00-SPART 0
FB014 ... BKN00-KTOKD
FB014 ... BKN00-KKBER BP01
FB013 ....Editing was terminated
Can anyone help how to solve this?Hello TJK,
<b>FB012 Session 1 : Special character for 'empty field' is /</b>
This is the special function in LSMW, for empty field system will put / sign automatically, so you need not to worry about that.
<b>FB007 Session 1 session name ZPROJ was opened</b> It is opening session ZPROJ which is your project name/object name.
<b>FB109 Trans. 1 : Transaction xd01 is not supported</b>
Check out your field mapping and conversion rule for object.
<b>FB013 ....Editing was terminated</b>
It is not finding proper field mapping rule / file inputs so the sytem terminates the LSMW object.
Check your field mapping and conversion rule, check your source fields, save the file in tab delimited format.
Hope this helps.
Regards
Arif Mansuri
Maybe you are looking for
-
A/R Invoices entered and printed directly from FI
We enter a fair amount of our Accounts Receivable invoices directly in FI. They are not part of the SD module. Besides using transactions FB12 (Request Correspondence) and F.64 (Maintain Correspondence) is there another way to print these invoices?
-
Multiple Monitor support using RDP in Windows 10
Does anyone know if you can use multiple monitors when connecting through RDP in Windows 10? In Windows 7, you need to be using Windows 7 Ultimate in order for RDP to support more than one monitor. For example, my home setup has (2) 22" monitors and
-
Hi all, When we execute Tcode IK34 to record measurement reading, system is asking to enter each result(reading at measuring point) as because it is a mandatory field. User wants optional field so that we can skip some measurement point without ent
-
I would like to create help bubbles, like thos in programs like word etc, where when a user has thier cursor over a certain component a little popup bubble will appear explaining wot that component does. I can not seem to find if there is such a comm
-
Display template family is not defined issue
Hi All, We have gone live PT 8.52.16 yesterday, Users were facing issue with the CRM create case. When user click on a button in a pagelet, it will open a create case component. In that its throwing display template id not defined. Same user is able