Problem in customer correspondence request

Hi All,
For a customer, in FBL5N, I go to environment>Correspondence>Request. Then I go to Display. The form is displayed. When I want to come back, there are 2 errors
FB815 - Possibly errors due to doc.reorg.in co.code XXX acct type D acct XXXXX ; check
FB826 - Output of correspondence XXX(correspondence type) XXX (company code) D (account type) XXXXXX (customer number) 0000 SRIDHAR 20101026 131753 for acct type/acct D
Can anyone please throw light on this?
Thanks,
Lakshmi

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Similar Messages

Customer statement request fron fbl5n

In FBL5N we can request for correspondence from Environment -Correspondence.I could request for only one customer at a time.Is it possible that i can request for more than one customer at a time.

Hi.
GOTO FBL5n and give customer number and execute and select the line item which you want to view and GOTO->Environment-> correspondence and request then it will ask to select the variant select account statement Correspondance and give required detail like fron and to date and customer number request will be generated and again goto correspondence and select display you can view the preview.
regards,
Santosh kumar

The Customer has requested complete delivery

Hello all,
I am unable to create a delivery, and I am getting the following message log in the delivery creation Log.
The Customer has requested complete delivery
But my problem is, I dont know which item this is related to?
How can i find out which item it is?
I have seen the delivery log, it gives details, but doesnt say which one has the error.
I have seen the Long text details.
Also, my other point is, is the complete delivery againbst a customer or is it against a material?
Many thanks

Hi saping SAP
In VD02 go to sales area data -> shipping tab ->uncheck the box for complete delivery.
But make sure you have opted for partial deliveries in VD02
Another option is in when you create a sales order VA01- go to header data->shipping tab->uncheck the box complete delivery and then proceed by saving the order
If you have the shortage of material and you have checked the complete delivery, then system will not allow you to save order
Regards
Srinath

Workflow-Attaching pdf from Custom Concurrent Request to email notification

Hi,
I was wondering if anyone has done something similar before and maybe have any suggestions?
I am trying to attach a .pdf file that is generated by a custom concurrent request report to an email notification.
The .pdf is generated correctly and I can access the file but I’m having problems trying to attach it to the email notification
I have tried to use Wf_Engine.SetItemAttrText and Wf_Engine.SetItemAttrDocument but are unable to get it to attach the file.
Does anyone know where I can find an example how to use either of the above API's? and a detailed explanation of them?
Should the attachment always be in FND_LOBS to be picked up or can it be picked up from the file system?
What should the Workflow - Notification - Performer Value be set to, that is referencing the message with the Document Attribute?
I'm unable to find a detailed explanation of how this can be done in the Oracle Workflow Developers Guide Release 2.6.4.
Any reference material or guidance as to where an example can be found will be greatly appreciated
Thanks
Coenraad

The PLSQL procedure that generates the PL/SQL BLOB documents must follow standard API formats and a sample is shown below.
procedure GENERATE_PDF(document_id in varchar2,
content_type in varchar2,
document in out nocopy blob,
document_type in out nocopy varchar2)
is
l_docid pls_integer;
l_filename varchar2(100);
l_errmsg varchar2(100) := 'The Document is not found in the Database';
l_bdoc blob;
l_data_type varchar2(100);
begin
l_docid := to_number(document_id);
dbms_lob.CreateTemporary(l_bdoc, FALSE, DBMS_LOB.Session);
SELECT file_data
into l_bdoc
FROM fnd_lobs
WHERE file_id= l_docid;
dbms_lob.Copy(document, l_bdoc, dbms_lob.getLength(l_bdoc));
exception
when others then
dbms_lob.WriteAppend(document, length(l_errmsg), l_errmsg);
wf_core.context('SA_MLRTST','GENERATE_PDF',document_id);
raise;
end GENERATE_PDF;
You can use FND_LOBS or any other table to get the content. The content must be stored into the corresponding table before using it.
The following is the PLSQL script for generating BINARY data for a file
declare
l_bfile BFILE;
l_temp_blob blob;
l_docid number :='1000';
l_ctype varchar2(300) :='application/pdf';
l_filename varchar2(50) :='testfile.pdf';
begin
dbms_lob.createtemporary(l_temp_blob, true, dbms_lob.session);
l_bfile := BFILENAME('OEX_INPATH',l_filename);
dbms_lob.fileopen(l_bfile, dbms_lob.file_readonly);
dbms_lob.loadfromfile(l_temp_blob, l_bfile, dbms_lob.getlength(l_bfile));
INSERT INTO fnd_lobs(file_id, file_name, file_content_type,file_data,file_format)
VALUES( l_docid,l_filename,l_ctype,l_temp_blob,'binary');
end;
OEX_INPATH - this is a database directory, you need to copy the pdf file which you want to convert to BINARY to the location which this directory points
l_filename - name of the file which need to be converted to BINARY format

Need help for Customizing Correspondence Management

Hi,
Could anyone provide me some documents or reference links which will be helpful for Customizing Correspondence Management in ES4?
Many Thanks!!

Hi Santosh,
Sorry for the late reply.
I have a XDP file having both static and dynamic content. I need to populate the dynamic content with some value which I will be getting from the XML which is stored in the body of the SOAP request. I want the letter to be generated dynamically (like no user selection of XML etc) because I want to avoid manual input in the correspondence management.
Could you please let me know if the above can be achieved. If yes, could you please provide any useful stuff related to above requirement.
Many Thanks!!!

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
     <echo>basedir ${basedir}</echo>
     <property environment="env"/>
<echo>current folder ${basedir}</echo>
     <property file="${basedir}/build.properties"/>
     <taskdef resource="net/sf/antcontrib/antlib.xml">
     <classpath>
          <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
     </classpath>
     </taskdef>
     <target name="init">
          <tstamp>
               <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
          </tstamp>
          <property name="build.log.dir" location="${basedir}/buildlogs"/>
          <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
          <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
          <echo message="Build logged to ${build.log.filename}"/>
     </target>
     <target name="deployAll" depends="init">
     <echo>Deploy for environment ${deployment.plan.environment}</echo>
     <antcall target="deployAllComposites"/>
</target>

     <target name="deployAllComposites" depends="init">
     <foreach target="deployComposites" param="Files">
          <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
     </foreach>
     </target>
     <target name="deployComposites" depends="init">
     <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
          <if>
               <equals arg1="${deployAction}" arg2="deploy" />
               <then>
                    <echo message="Deploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="false"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </then>
               <else>
                    <echo message="ReDeploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="true"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </else>
          </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

Cancel customer DP Request

Dear SAP Gurus,
i have problem to cancel DP Request. I made DP Request from SD(VF01). And i want to cancel that DP Request because of any reason. so i cancel it through VF11 and its going smoothly. When i see the doc. flow, the status of that DP Request is not cleared but the status of the reverse document is cleared. the both should be have "cleared status", right?
when i see the FBL5N too, the DP Request is still Open, but when i see the cleared item, it shows me the Request has been cleared. but the posting key is 19. i think it should be 09, right?
can you anybody help me solve this issue.
thanks,
Land Lord

i have find the answer. see this sap note if you face the same issue Note 1532358 - Reversal of down payment request created incorrectly.
Thanks

Cancel customer DP Request VF11 but remain as open item in fbl5n.

Dear SAP Gurus,
i have problem to cancel DP Request. I made DP Request from SD(VF01). And i want to cancel that DP Request because of any reason. so i cancel it through VF11 and its going smoothly. When i see the doc. flow, the status of that DP Request is not cleared but the status of the reverse document is cleared. the both should be have "cleared status", right?
when i see the FBL5N too, the DP Request is still Open, but when i see the cleared item, it shows me the Request has been cleared. but the posting key is 19. i think it should be 09, right?
can you anybody help me solve this issue.
thanks,
Land Lord

i have find the answer. see this sap note if you face the same issue Note 1532358 - Reversal of down payment request created incorrectly.
Thanks

PROBLEM IN CUSTOM IDOC CREATION

Hi Friends,
                I'm facing a problem in custom idoc creation plz try to assist me
1.As per the information i have i'm creating segment in we31
for cremas01 idoc.But when i enter the name for segment i'm getting message "Name range Voilation particular name which i had given is not permitted in customer system?
Plz clarify this,and are there any formalities which i should look for before creating custom idoc?
Good answers will be rewarded.
                                                                          Regards,
                                                                           Vinod.

The Problem might be.... with the naming of the segment.
Standard segments should be created with 'E1' and all the custom segments are created using 'Z1' and the name with 8 characters long only is permitted.
Reward Points if useful.

Problem in converting Spool Request into PDF format

Hi,
I am facing problem to convert spool request (which store output of sap script) in to PDF format. Actually I have converted it with function module 'CONVERT_OTFSPOOLJOB_2_PDF' and it is working properly but the problem occurs where the BOLD fonts are used. I am unable to see the Text/Address where i have used Bold Font in script (PDF FORMAT). Even though in (SPO1) spool request shows every thing perfectly (along with Bold Font). It will great if you could suggest me something.
Thanks,
Pradeep

Hi Pradeep,
Use ,
Closing the Sapscript, we save data (OTF) in a table
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = t_otfdata
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
DATA: BEGIN OF t_otfdata2 OCCURS 0.
INCLUDE STRUCTURE solisti1.
DATA: END OF t_otfdata2.
Move OTF data to another table with lenght 255
LOOP AT t_otfdata.
CONCATENATE t_otfdata-tdprintcom t_otfdata-tdprintpar INTO t_otfdata2.
APPEND t_otfdata2.
ENDLOOP.
Convert OTF format to PDF
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = 'OTF'
format_dst = 'PDF'
devtype = 'PRINTER'
FUNCPARA =
len_in = len_in
IMPORTING
len_out = len_out
TABLES
content_in = t_otfdata2
content_out = t_pdfdata
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
Have a look at Progs. RSTXPDF4 and RSTXPDFT2 for converting the Spool to PDF.
Regards,
Raj
Message was edited by: Rajasekhar Dinavahi
Message was edited by: Rajasekhar Dinavahi

Problem in Approving Requisition Request in MSS UWL

Hi,
I'm facing problem in approving requisition request sent through Manager in MSS UWL.
We have configured standard process HR_MSSRCF_REQUISITION with ISR scenario is SRQ3. Workflow is WS45600028
Case: When I successfully Check & Send Requisition Request form from MSS Recruitment, it is coming in Manager UWL.
But, when i open the workitem for approval it is not coming as a PDF form with Approve Button in the bottom (Standard). Instead, it opening as per the below screen.
Please help to resolve this issue.
Regards

You should be giving the process reference number or workitem ID in transaction hrasr_test_process.
Which release you are on , what is the SP level of component EA-HRGXX?
Further as per note 972322 - HR Administrator: Migration WD4A - the start process application has been migrated to WDA.
Check the UWL XML configuration to see if the config is as below for the approval task...
APPLICATION     ASR_PROCESS_EXECUTE(For EhP4, otherwise application depends on the level of EA-HRGXX )
      DYNPARAM     WI_ID=${item.externalId}
      NAMESPACE     sap
      SYSTEM_ALIAS     <use your system alias>
A sample XML is available with note - 1371626 - UWL Configuration for HR Administrator BP version 1.51.
This appears to me to be a XML configuration issue. Collaborate with your portal and UWL config consultant.
Hope this helps.
Regards,
Sahir.

Customer Invoice Request XML Specification

Hi All,
I've been searching my butt off looking for the customer invoice request XML spec.
Where is it?
Judson

Minimal Request:
<?xml version="1.0" encoding="utf-8"?>
<CustomerInvoiceRequestRequest>
<MessageHeader>
    <CreationDateTime />
</MessageHeader>
<CustomerInvoiceRequest actionCode="04" reconciliationPeriodCounterValue="1">
<BaseBusinessTransactionDocumentID>V00064348</BaseBusinessTransactionDocumentID>
<BaseBusinessTransactionDocumentTypeCode>29</BaseBusinessTransactionDocumentTypeCode>
    <ProposedInvoiceDate>2012-05-07</ProposedInvoiceDate>
    <name>Extreme Reach - DEV</name>
<ReferenceBusinessTransactionDocumentID>V00064348</ReferenceBusinessTransactionDocumentID>
    <BusinessProcessVariantType>
      <BusinessProcessVariantTypeCode>1</BusinessProcessVariantTypeCode>
      <MainIndicator>true</MainIndicator>
    </BusinessProcessVariantType>
    <BusinessProcessVariantType>
      <BusinessProcessVariantTypeCode>319</BusinessProcessVariantTypeCode>
      <MainIndicator>false</MainIndicator>
    </BusinessProcessVariantType>
    <BuyerParty>
      <InternalID>2113</InternalID>
    </BuyerParty>
    <EmployeeResponsibleParty>
      <InternalID>8000000017</InternalID>
    </EmployeeResponsibleParty>
    <SalesUnitParty>
      <InternalID>TV3003</InternalID>
    </SalesUnitParty>
    <SalesAndServiceBusinessArea>
      <DistributionChannelCode>01</DistributionChannelCode>
    </SalesAndServiceBusinessArea>
    <PricingTerms>
      <PricingProcedureCode listID="2">PPSTD1</PricingProcedureCode>
      <CurrencyCode>USD</CurrencyCode>
    </PricingTerms>
    <Item actionCode="04">
<BaseBusinessTransactionDocumentItemID>10</BaseBusinessTransactionDocumentItemID>
<BaseBusinessTransactionDocumentItemTypeCode>002</BaseBusinessTransactionDocumentItemTypeCode>
      <SettlementRelevanceIndicator>true</SettlementRelevanceIndicator>
      <BaseItemCancelledIndicator>false</BaseItemCancelledIndicator>    <ReceivablesPropertyMovementDirectionCode>2</ReceivablesPropertyMovementDirectionCode>
      <Product>
        <InternalID>V-SD-NEXTDAY-STN-ONLINE-FIRST</InternalID>
        <TypeCode>2</TypeCode>
      </Product>
      <CashDiscountDeductibleIndicator>false</CashDiscountDeductibleIndicator>
      <Quantity unitCode="EA">1</Quantity>
      <QuantityTypeCode>EA</QuantityTypeCode>
      <PriceAndTax>
        <PriceComponent>
          <TypeCode listID="2">7PR1</TypeCode>
          <CategoryCode>1</CategoryCode>
          <PurposeCode>1000</PurposeCode>
          <MajorLevelOrdinalNumberValue>10</MajorLevelOrdinalNumberValue>
          <MinorLevelOrdinalNumberValue>1</MinorLevelOrdinalNumberValue>
          <Rate>
            <DecimalValue>2.0000</DecimalValue>
            <CurrencyCode>USD</CurrencyCode>
            <BaseDecimalValue>1</BaseDecimalValue>
            <BaseMeasureUnitCode>EA</BaseMeasureUnitCode>
          </Rate>
          <RateBaseQuantityTypeCode>EA</RateBaseQuantityTypeCode>
          <CalculationBasis>
            <BaseCode>3</BaseCode>
            <Quantity unitCode="EA">1</Quantity>
            <QuantityTypeCode>EA</QuantityTypeCode>
            <Amount currencyCode="USD">0</Amount>
          </CalculationBasis>
          <CalculatedAmount currencyCode="" />
          <RoundingDifferenceAmount currencyCode="" />
          <EffectiveIndicator>true</EffectiveIndicator>
          <ManuallyChangedIndicator>true</ManuallyChangedIndicator>
          <GroupedIndicator />
          <OriginCode>2</OriginCode>
          <PriceSpecificationUUID />
          <PriceSpecificationDeterminationTimePoint>
            <TypeCode>1</TypeCode>
            <Date>2012-05-07</Date>
          </PriceSpecificationDeterminationTimePoint>
        </PriceComponent>
      </PriceAndTax>
      <AccountingCodingBlockAssignment>     <AccountingCodingBlock>A1520<GeneralLedgerAccountAliasCode>Z0003</GeneralLedgerAccountAliasCode></AccountingCodingBlock>
      </AccountingCodingBlockAssignment>
    </Item>
</CustomerInvoiceRequest>
</CustomerInvoiceRequestRequest>

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problem with Non JSF Request to JSF Page

Hi All,
I am working on dynamic controls generation based on the request come from non jsf page
For the first request, pageworks perfectly. but when we go for second request, it is not rendering and I am getting same old page.
What I have identified is if I have 2 pages as JSF, application is not giving any problem.
For this I have written small test application contains both JSF pages only.
page1 contains 3 submit buttons.
When submit buttons are clicked based on the request, I get, am able to see the dynamic controls.
SO there is no problem with JSF PAGE to JSF Page Communication
Now I have done some changes in First JSF page. Instead of submitting directly I am submitting the page through JavaScript which is nonb JSF request. There I am facing the problem and based on requested qaction I am not able to see correct rendered page based on the requested action.
Any Idea why it is giving problem for non JSF requests??
Thanks
Sudhakar

For Your Convenience in understanding the problem
I am pasting entire test code
Page 1 -- (here page2 is Page1 and Page1 is page2 - some naming convention errors :) )
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
    <f:view>
        <html lang="en-US" xml:lang="en-US">
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>Page2 Title</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                <h:form binding="#{Page2.form1}" id="form1">

                    <h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=1'; document.forms['form1'].submit(); return false;"/>
                    <h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=2'; document.forms['form1'].submit(); return false;"/>
                    <h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=3'; document.forms['form1'].submit(); return false;"/>

                    
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>Page1 Bean
* Page2.java
* Created on June 25, 2005, 11:08 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
public class Page2 extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
    private int __placeholder;
    private HtmlForm form1 = new HtmlForm();
    public HtmlForm getForm1() {
        return form1;
    public void setForm1(HtmlForm hf) {
        this.form1 = hf;
    private HtmlCommandButton button1 = new HtmlCommandButton();
    public HtmlCommandButton getButton1() {
        return button1;
    public void setButton1(HtmlCommandButton hcb) {
        this.button1 = hcb;
    private HtmlCommandButton button2 = new HtmlCommandButton();
    public HtmlCommandButton getButton2() {
        return button2;
    public void setButton2(HtmlCommandButton hcb) {
        this.button2 = hcb;
    private HtmlCommandButton button3 = new HtmlCommandButton();
    public HtmlCommandButton getButton3() {
        return button3;
    public void setButton3(HtmlCommandButton hcb) {
        this.button3 = hcb;
    // </editor-fold>
    public Page2() {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
        try {
        } catch (Exception e) {
            log("Page2 Initialization Failure", e);
            throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
        // </editor-fold>
        // Additional user provided initialization code
    protected webapplication8.ApplicationBean1 getApplicationBean1() {
        return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
    protected webapplication8.SessionBean1 getSessionBean1() {
        return (webapplication8.SessionBean1)getBean("SessionBean1");
     * Bean cleanup.
    protected void afterRenderResponse() {
    public String button1_action() throws Exception{
        // TODO Following code was replaced by static navigation
       getSessionBean1().setId(1);
      /* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
       return null;*/
        return "case1";
    public String button2_action() throws Exception{
        // TODO Following code was replaced by static navigation
            getSessionBean1().setId(2);
      /* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
       return null;*/
        return "case2";
    public String button3_action() throws Exception{
        // TODO Following code was replaced by static navigation
            getSessionBean1().setId(3);
        /*    ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
        return null;*/
        return "case3";
}page 2
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
    <f:view>
        <html lang="en-US" xml:lang="en-US">
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>Page1 Title</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                <h:form binding="#{Page1.form1}" id="form1">
                    <h:panelGrid binding="#{Page1.gridPanel1}" id="gridPanel1" style="left: 96px; top: 48px; position: absolute"/>
                    <f:selectItems binding="#{Page1.radioButtonList1SelectItems1}" id="radioButtonList1SelectItems1"/>
                    <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1"
                        style="left: 384px; top: 120px; position: absolute" value="Submit"/>
                    <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1" style="left: 384px; top: 72px; position: absolute" value="Submit"/>
                    <h:outputLink binding="#{Page1.hyperlink1}" id="hyperlink1" style="left: 480px; top: 216px; position: absolute" value="http://www.sun.com/jscreator">
                        <h:outputText binding="#{Page1.hyperlink1Text}" id="hyperlink1Text" value="Hyperlink"/>
                    </h:outputLink>
                    <h:commandLink binding="#{Page1.linkAction1}" id="linkAction1" style="left: 456px; top: 264px; position: absolute">
                        <h:outputText binding="#{Page1.linkAction1Text}" id="linkAction1Text" value="Link Action"/>
                    </h:commandLink>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>page2 bean
* Page1.java
* Created on June 25, 2005, 10:52 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import com.sun.jsfcl.data.DefaultSelectItemsArray;
import java.util.Vector;
import javax.faces.component.UIComponent;
import javax.faces.component.UISelectItems;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import javax.faces.model.SelectItem;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class Page1 extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
    private int __placeholder;
    private HtmlForm form1 = new HtmlForm();
    public HtmlForm getForm1() {
        return form1;
    public void setForm1(HtmlForm hf) {
        this.form1 = hf;
    private HtmlPanelGrid gridPanel1 = new HtmlPanelGrid();
    public HtmlPanelGrid getGridPanel1() {
        return gridPanel1;
    public void setGridPanel1(HtmlPanelGrid hpg) {
        this.gridPanel1 = hpg;
    private HtmlCommandButton button1 = new HtmlCommandButton();
    public HtmlCommandButton getButton1() {
        return button1;
    public void setButton1(HtmlCommandButton hcb) {
        this.button1 = hcb;
    private HtmlOutputLink hyperlink1 = new HtmlOutputLink();
    public HtmlOutputLink getHyperlink1() {
        return hyperlink1;
    public void setHyperlink1(HtmlOutputLink hol) {
        this.hyperlink1 = hol;
    private HtmlOutputText hyperlink1Text = new HtmlOutputText();
    public HtmlOutputText getHyperlink1Text() {
        return hyperlink1Text;
    public void setHyperlink1Text(HtmlOutputText hot) {
        this.hyperlink1Text = hot;
    private HtmlCommandLink linkAction1 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction1() {
        return linkAction1;
    public void setLinkAction1(HtmlCommandLink hcl) {
        this.linkAction1 = hcl;
    private HtmlOutputText linkAction1Text = new HtmlOutputText();
    public HtmlOutputText getLinkAction1Text() {
        return linkAction1Text;
    public void setLinkAction1Text(HtmlOutputText hot) {
        this.linkAction1Text = hot;
    // </editor-fold>
    public Page1() {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
        try {
            ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
            HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
            HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
            String id=req.getParameter("id");
            if(id!=null)
                getSessionBean1().setId(Integer.parseInt(id));
            if (getSessionBean1().getId()==1) {
                addTextBox();
            else if (getSessionBean1().getId()==2) {
                addCheckBox();
                addRadio();
            else if (getSessionBean1().getId()==3) {
                addRadio();
               // addCheckBox();
        } catch (Exception e) {
            log("Page1 Initialization Failure", e);
            throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
        // </editor-fold>
        // Additional user provided initialization code
    protected webapplication8.ApplicationBean1 getApplicationBean1() {
        return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
    protected webapplication8.SessionBean1 getSessionBean1() {
        return (webapplication8.SessionBean1)getBean("SessionBean1");
     * Bean cleanup.
    protected void afterRenderResponse() {
    private void addRadio() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Desc");
        outputText.setId("somedesc2");
        HtmlSelectOneRadio checkBox = new HtmlSelectOneRadio();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        checkBox.setId("a3");
        UISelectItems items = new UISelectItems();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<10;i++) {
            arrays[size - 1].add(new SelectItem(""+i+"",""+i));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addCheckBox() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Desc");
        outputText.setId("somedesc1");
        HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        checkBox.setId("a2");
        UISelectItems items = new UISelectItems();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<10;i++) {
            arrays[size - 1].add(new SelectItem(""+i+"",""+i));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addTextBox() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Description for Control Text Box");
        outputText.setId("somedesc");
        HtmlInputText textField = new HtmlInputText();
        // textField.setId("textField_"+control.getId());
        textField.setId("a1");
        HtmlOutputText outputText1 = new HtmlOutputText();
        hyperlink1Text.setValue(" ");
        hyperlink1Text.setStyleClass("bodyText");
        textField.setStyleClass("frmObjects");
        gridPanel.setColumns(3);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(hyperlink1Text);
        gridPanel.getChildren().add(textField);
        parent.getChildren().add(gridPanel);
    private DefaultSelectItemsArray array = new DefaultSelectItemsArray();
    public DefaultSelectItemsArray getArray() {
        return array;
    public void setArray(DefaultSelectItemsArray dsia) {
        this.array = dsia;
    private Vector vectDefaultSelectItemsArray = new Vector();
    private DefaultSelectItemsArray[] arrays = new DefaultSelectItemsArray[10];
    public DefaultSelectItemsArray[] getArrays() {
        return arrays;
    public void setArrays(DefaultSelectItemsArray[]dsia) {
        this.arrays = dsia;
    private UISelectItems radioButtonList1SelectItems1 = new UISelectItems();
    public UISelectItems getRadioButtonList1SelectItems1() {
        return radioButtonList1SelectItems1;
    public void setRadioButtonList1SelectItems1(UISelectItems uisi) {
        this.radioButtonList1SelectItems1 = uisi;
    private ValueBinding getValueBinding(String expression) {
        return     FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
    public String button1_action() {
        // TODO Replace with your code
        return "case1";
}my navigation.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                              "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
    <navigation-rule>
        <from-view-id>/Page2.jsp</from-view-id>
        <navigation-case>
            <from-outcome>case1</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
        <navigation-case>
            <from-outcome>case2</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
        <navigation-case>
            <from-outcome>case3</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
    </navigation-rule>
    <navigation-rule>
        <from-view-id>/Page1.jsp</from-view-id>
        <navigation-case>
            <from-outcome>case1</from-outcome>
            <to-view-id>/Page2.jsp</to-view-id>
        </navigation-case>
    </navigation-rule>
</faces-config>my managed beans xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                              "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
    <managed-bean>
        <managed-bean-name>Page1</managed-bean-name>
        <managed-bean-class>webapplication8.Page1</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>SessionBean1</managed-bean-name>
        <managed-bean-class>webapplication8.SessionBean1</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>ApplicationBean1</managed-bean-name>
        <managed-bean-class>webapplication8.ApplicationBean1</managed-bean-class>
        <managed-bean-scope>application</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>Page2</managed-bean-name>
        <managed-bean-class>webapplication8.Page2</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <managed-bean>
</faces-config>

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Problem in customer correspondence request

Similar Messages

Maybe you are looking for