Problem in deletion while calling a form
Hi All,
I have a form form1 and I am calling another form form2 by form1 and calling form3 by form2
everying is ok till yet, but in form3 when I try to delete any data then it shows a message
at the time of commit, message is....
"FRM - 40403 - A calling form has unapplied Changes. Save not Allowed."
Please help
Mohan,
Try opening each form in different session.
OPEN_FORM(<form_name>, ACTIVATE, SESSION, NO_SHARE_LIBRARY_DATA);Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly
Similar Messages
-
Can i recover deleted facetime call log form my mac?
iI accidentally deleted my call log off my computer is it gone forever?
Kiweoiwai wrote:
I'm so sorry you lost your contacts, but you will solve it if you have them backed up! I found a tip which is exactly for solving this problem - How to Recover Deleted Contacts from HTC Phone! I've used it to solve similar problems not long ago! Have a try! Good luck! Merry Christmas!
When a "delete" is completed, the particular space that the file takes up is usually marked as blank and can be used again by new files, however, the deleted file will probably be still there until finally new data overwrites it. Consequently, if you ever haven't taken any new data, you still can recover your deleted contacts from HTC phone. -
Error while calling a form from another form's menu item
I created a main form and menu module for this form.
I am calling another form from main form menu item.
i moved both the forms and menu and compiled them.
But, when i run this form i am getting an error saying
FRM 92100: Your connection to the server was interrupted
This may be the result of a network error, or a failure on the server.
You will need to establish your session.
I set the seperateframe = true
networkentries = 30
But still getting the same error.
Is there any parameter that i am missing.
I will greatly appreciate if anybody can direct me to the solution.
Thank you.
Navya.Hi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit -
ORA-12203 while calling a form from external procedure
Hi
I am using oracle 10g 10.2.0.3.0 database with forms 6i. We have created a database procedure , which makes a call to external procedure(C program). Now this external procedure creates a process and process is creating a call to form.
We have checked through the process explorer in the server, process is getting created successfully, but doesn't executed. We tried to start the process manually, it is throwing ora-12203: TNS unable to connect to destination.
We are able to connect the database from form's runtime. but if this runtime is executed from a process which is created by external procedure, it is throwing ora-12203.
Any idea?check tnsnames and listener files.verify the host and the port
-
Suppress Print Dialogue while calling ADOBE FORM
Hi,
How to suppress the Print dialogue when I call PDF FORM.
In Smart form interface we have a field no_dialogue in the structure SSFCTRLOP to suppress print dialogue.
But in the Function Module generated by Adobe Form or in the Adobe Form Interface we don't have such structure to control the print dialogue.
awaiting the answers.
Ram.
Edited by: RamMohan Rao on Sep 17, 2008 7:29 PMHi,
Try to generate the interface and adobe form and also the generated FM "/1BCDWB/SAPLSM00000027"
Regards,
Srini. -
How to add the parameters onto the reports while calling from forms
Hi all,
I am using oracle forms 10g. I want to call a report from the form.
But i dont know how to add parameters to the url while using
web.show_document();
i have a sample code. But it does not add the forms values onto the url.
DECLARE
v_host varchar2(100);
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
v_port := '8889';
ELSE
v_port := '7778';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=rep_fsprod';
v_parameter_string := v_parameter_string||'&report=AAP_TOTAL_CONTRACT_VALUE_RPT.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
Are we able to add the text values in the form from to the URL.
Please let me know....
thanks in advance....
Naveenhello
read the following white paper http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
cheers
Q -
Problem with sqlplus when called from forms
Dear friends,
I have the following problem, we are using forms 10g and database 10g,we are using client_host command to call sqlplus from form and the query which is being run by sqlplus is supposed to take an input from the client and return results. there is no problem in that. but the problem is the sqlplus window opens only in minimized mode and the users wants it open in maximized mode by default.
this is the code i am using to do this
pat:='sqlplusw -s'||:global.text||'@i:\sqls\codewise.sql'
client_host(pat);
please help me
prawinI'm not sure allowing end users access to a sqlplus session is such a good idea. A savvy user having a bad hair day and becoming disgruntled could wreak havoc on your database if he/she has the right permissions. Besides, I've heard rumors that Forms is really good at accepting user input, querying the database, and displaying the results :P
-
Report does not show the main section while calling from forms 6i
Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advancecan you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report
-
Urgent:Error While calling one form from another form
Hi,
i am using a form in which zoom functionality is enabled.From this form if i am clicking view->zoom it should open another form which should accept two parameters from the first form.But whenever i am clicking on zoom its giving the following error.
FRM-47023:No such parameter named G_QUERY_FIND exists in form
XX_EMPLOYEE_CONVERSION(Name of the form which i am calling from first form)
When i am clicking 'ok' then it shows the error
FRM-40105:Unable to resolve reference to item PARAMETER.G_QUERY_FIND
Eventhough i have developed my form using template.fmb which uses the parameter G_QUERY_FIND why this error is coming?
Can anyone suggest a solution for this.
Thanks in advancePARAMETER.G_QUERY_FIND is one of he objects in the APPSTAND.fmb. You will need to Subclass all of the objects in APPSTAND.fmb in your custom form. If you do not have a copy of this file in your FORMS60_PATH, I suggest you put a copy there. If you don't have a FORMS60_PATH specified then I would highly suggest adding this entry to your Forms Home in the Registry. Also, you will want all of the libraries in the AU_TOP/Resources folder as well.
I also suggest looking at the Oracle Applications Developer's Guide (http://download.oracle.com/docs/cd/B25284_01/current/acrobat/115devg.pdf) as it outlines all of the required objects you must have in your form and reports.
Hope this helps.
Craig... -
Getting tha java script error while calling OAF forms in ADF
Hi ,
I am trying to get/access the Oracle forms in ADF page.
I am following http://static.commit-consulting.com/oraformsfaces developers guide for guidlines.
while runnign my page getting the error in popup look like java script error.
the pop up contente is :
Failed to execute java script
Check for JavaScript errors, if the Forms server is running and if your browser can download a javaScript from http://bdc6oracle001.gdnindia.com:8005/forms/frmservlet?config=OraFormsFaces
http://bdc6oracle001.gdnindia.com:8005/forms/frmservlet?config=OraFormsFaces is my server EBS server where oracle forms exist.
Please help me on this.
Thanks,
MadhavaReddyYou're probably better off asking the OraFormsFaces people for help
-
Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO of XMII
Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
VansiVamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam -
Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO
Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
VansiVamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam -
Getting dump while calling adobe form
Hello All,
I am working on a webdynpro application and within the application I am calling a adobe form, when I call the adobe form I am getting the following short dump:
Error in the ABAP Application Program
The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLSM00000027 " in
include "/1BCDWB/LSM00000027F01 " in
line 587:
"Field "BKPF-WAERS" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
I looked at the adobe form and the interface and the field WAERS is being defined there but I am not sure then why I am getting this dump.
Can you please help me on this.
Thanks,
Rajat
Moderator message: wrong forum, please have a look in the dedicated "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Feb 9, 2011 3:23 PMHi,
Try to generate the interface and adobe form and also the generated FM "/1BCDWB/SAPLSM00000027"
Regards,
Srini. -
Error while calling /forms/frmservlet
Hello all,
After a fresh installation of Weblogic/Oracle Fusion Middleware 11g , I get the following error in the java console while calling the forms/frmservlet : http://test.corp:8090/forms/frmservlet
Java Plug-in 1.6.0_18
Verwendung der JRE-Version 1.6.0_18-b07 Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Documents and Settings\user
c: Konsole löschen
f: Objekte in Finalisierungswarteschlange finalisieren
g: Speicherbereinigung
h: Diese Hilfemeldung anzeigen
l: ClassLoader-Liste ausgeben
m: Speicherbelegung anzeigen
o: Protokollierung auslösen
q: Konsole ausblenden
r: Richtlinien-Konfiguration neu laden
s: System- und Bereitstellungseigenschaften ausgeben
t: Threadliste ausgeben
v: Thread-Stack ausgeben
x: ClassLoader-Cache löschen
0-5: Trace-Stufe auf <n> setzen
basic: Fortschritts-Listener hinzugefügt: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1808199
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/frmall.jar, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/frmall.jar mit Proxy=DIRECT wird hergestellt
network: Verbindung von http://test.corp:8090/ mit Proxy=DIRECT wird hergestellt
java.io.FileNotFoundException: http://test.corp:8090/forms/java/frmall.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.downloadJAR(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.access$000(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFileInternal(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.access$600(Unknown Source)
at sun.misc.URLClassPath$JarLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath$JarLoader.ensureOpen(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/frmall.jar, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/frmall.jar mit Proxy=DIRECT wird hergestellt
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/oracle/forms/engine/Main.class, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/oracle/forms/engine/Main.class mit Proxy=DIRECT wird hergestellt
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/oracle/forms/engine/Main.class, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/oracle/forms/engine/Main.class mit Proxy=DIRECT wird hergestellt
basic: Laden: Klasse oracle.forms.engine.Main nicht gefunden
Laden: Klasse oracle.forms.engine.Main nicht gefunden
java.lang.ClassNotFoundException: oracle.forms.engine.Main
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://test.corp:8090/forms/java/oracle/forms/engine/Main.class
at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 7 more
Ausnahme: java.lang.ClassNotFoundException: oracle.forms.engine.Main
My configuration is the following :
- HP ProLiant DL360 G7 (64GB)
- RHEL 5.5 64-Bit
- jdk-6u22-linux-x64 (used during the installation)
- Oracle Weblogic 1.0.3.3 64 Bit (wls1033_generic.jar)
- Oracle Fusion Middleware 11.1.1.3 64 Bit
That's really strange I had no trouble during the installation process, my problem is when I call the forms,
then I get the error described before.
Did someone , maybe had this problem ? and where could I start to investigate ?
Best regards
Franeone more things that I have seen , which is a bit strange.
when I try to access directly the jar like :
http://test.corp:8090/forms/java/frmall.jar
I get the following message in the browser :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
Usually on my other installations I can access the jar file directly wihout error. -
Problem while calling the FM FP_JOB_OPEN
Hi All,
I have a scenario where i need to attach multiple Forms(Adobe) to a work flow container.
While calling the FM 'FP_JOB_OPEN', i am passing the required parameters as below
wl_outputparams-nodialog = 'X'.
wl_outputparams-connection = 'ADS'.
wl_outputparams-dest = 'LP01'.
wl_outputparams-getpdf = 'X'.
the problem is that i get a Print preview pop-up even though i pass Nodialog = 'X', and more over after calling the actual Form function module the resultant parameter 'fpformoutput-pdf' is only filling up only after i process the print preview dialog and see the preview. other wise the field 'fpformoutput-pdf' is blank.
as i need to do this work in back ground(for work flow background step) i do not want the print preview pop-up window.
can some one help me in this regard.
PS. For multiple forms i tried calling the form functions modules in between every FP_JOB_OPEN n FP_JOB_CLOSE
as well as a single FP_JOB_OPEN and calling the multiple form function modules and FP_JOB_CLOSE.
thanks in anticipation .
Srinivas@koolspy
Yes, i did specify the settings in the o/p options.
in addition to this, after debugging i could able to see some issue when calling form name via FM 'FP_FUNCTION_MODULE_NAME', in this FM it is appending '_IN' to the generated FM name and trying to check for existence check, obviously there wont be any FM as it is appending '_IN' to the generated FM.
but when calling the generate FM after FP_JOB_OPEN it is throwing sy-subrc = 1, which is Usage error.
Why is it behaving weirdly, is there any thing i am missing while calling the Form?
please help as this is on high priority
thanks
srinivas
Maybe you are looking for
-
How to schedule a java job?
Hi, all. My server is nw 7.0. Now I want to make a java app and schedult it to execute every 10 minutes. How can I do this? Thx
-
I need help. Our Tv is about 1 year old with no ins. and a line has started on the left side of screen. It is really visiable when on hd channel. what do we do?
-
I am getting the following error on the attached code and can not seem to see the error in my ways - can someone please help me see the light (or fix the problem). Warning: mysql_fetch_array(): supplied argument is not a valid MySQL result resource i
-
Precise positioning of components
i was wonderin how could i precisely position textarea components in an applet???i understand that layout managers arent supposed to be used when precise positioning is concerned... also, can there be any way where u can draw string or write text on
-
hi, i am new to this forum,can anybody tell mme which method is more efficient in ALV REPORT:- 1.) DECLARING TYPES AND WORK AREAS OR 2.) DECLARING INTERNAL TABLE AND PASSING IT IN FUNCTIONS. PLZZZ ANY BODY GIVE EXAMPLE OF 2 ND OPTI