Problem while calling the FM FP_JOB_OPEN
Hi All,
I have a scenario where i need to attach multiple Forms(Adobe) to a work flow container.
While calling the FM 'FP_JOB_OPEN', i am passing the required parameters as below
wl_outputparams-nodialog = 'X'.
wl_outputparams-connection = 'ADS'.
wl_outputparams-dest = 'LP01'.
wl_outputparams-getpdf = 'X'.
the problem is that i get a Print preview pop-up even though i pass Nodialog = 'X', and more over after calling the actual Form function module the resultant parameter 'fpformoutput-pdf' is only filling up only after i process the print preview dialog and see the preview. other wise the field 'fpformoutput-pdf' is blank.
as i need to do this work in back ground(for work flow background step) i do not want the print preview pop-up window.
can some one help me in this regard.
PS. For multiple forms i tried calling the form functions modules in between every FP_JOB_OPEN n FP_JOB_CLOSE
as well as a single FP_JOB_OPEN and calling the multiple form function modules and FP_JOB_CLOSE.
thanks in anticipation .
Srinivas
@koolspy
Yes, i did specify the settings in the o/p options.
in addition to this, after debugging i could able to see some issue when calling form name via FM 'FP_FUNCTION_MODULE_NAME', in this FM it is appending '_IN' to the generated FM name and trying to check for existence check, obviously there wont be any FM as it is appending '_IN' to the generated FM.
but when calling the generate FM after FP_JOB_OPEN it is throwing sy-subrc = 1, which is Usage error.
Why is it behaving weirdly, is there any thing i am missing while calling the Form?
please help as this is on high priority
thanks
srinivas
Similar Messages
-
Problem while calling the user exit
Hi All,
In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUNCTION '001' IS written but after that it's not going inside the user exit. But if I put back the original FM , this suer exit is getting triggered and it's gong inside the exit. I've activated the Project for this user exit also. As per our requirement I've to copy the original FM into Z* FM.But my doubt is when I put back the original FM , this User Exit is getting triggered whereas when I copied this FM it's not working .
Anybody could helpme out why it's happening ?
Thanks
AlokSrinivas,
Yes it's related to the other post where I had to copy one standard Function Pool.While copying the function pool I copied the FMs also.This problem is coming out of one FM ,when I changed this to Z* at the place where it is called, the user exit which is written inside that FM is not getting triggered even though program is reaching till the point where this user exit is called .
Any clue ?
Thanks
Alok -
Problems while calling the webservice published at XI end
Hi ,
I have published a webservice at the XI end and to test it I am calling the webservice from xmlspy .
I do get the popup for username and password in the xmlspy for the adapter but it fails to send the data to the webservice .
I even checked the SOAP adapter status in the RWB and its grey. and the installed and started option of adapter monitoring the soap adapter is not shown .
Can anyone through some light as to what can be the reason behind this .
is it the problem with the adapter or the webservice
Thanks
NikhilHI Ricardo ,
I have tried that but still I am getting the below error.
<b>java.lang.Exception: Channel not found for :SIEBEL_DEV:SIEBEL_SOAP in SOAP
at com.sap.aii.af.mp.soap.web.HelperServlet.processFindChannel(HelperServlet.java:420)
at com.sap.aii.af.mp.soap.web.HelperServlet.doGet(HelperServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</b>
any other Ideas.
Thanks
Nikhil -
Internal Error occurred while calling the ProcessDPCommands API
We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous] -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Error while calling the EAI Viewer
Dear all,
I am working on Document Management System ECC 6.00
I am able to upload a PDF document in to the system, but when i save it and try to call the document back it is giving me the folllowing error."Error while calling the EAI Viewer" But when i try to open the same in the next PC it is opening. the work station application which i have defined is EAIWeb.webviewer2D.1 %SAP-CONTROL% for the application .pdf.
Kindly suggest what will be the problem as it is not opening in my PC but opening in an different PC with the same user name.
Kindly suggest.Hi Kishuz ,
ECL Viewer comes with SAP
It is Engineering client viewer, which works for files like *.jt(jupiter technology), *.pdf(acrobat), *.dwg(autocad), *.step, *.iges
with ECL viewer you can view files like dwg without having Autocad Installed on your machine.
Alos it gives redlining feature...
thus layers help in indicating the modifications needed or commenting on the drawings...
Now the procedure for installation,
1. Install the latest SUN JAVA version. The path could be <b>c:\program files\java\</b>
2. While installing SAP GUI, ensure that the ECL component is not selected from R/3 Add On.
4. Install ECL Viewer 5.1.2 on local machine.
5. Ensure the path is as follows :(C:\Program Files\Common Files\SAP Shared\System or C:\Program Files\Common Files\SAP Shared\System\Java )
6. Ensure that the following files are in the <b>c:\program files\java\1.5.0_08\lib\ext</b>
folder:
- VisWebS.jar,
- VisWeb.jar,
- eaisupport.jar,
- eaisupportS.jar
- version.ini
- vctk.ini
In case, please copy the mentioned files from <ECL Install DIR>\java.
(C:\Program Files\Common Files\SAP Shared\System or
C:\Program Files\Common Files\SAP Shared\System\Java )
Reward points if useful...
regards
Niranjan -
Facing a Problem while downloading the data from ALV Grid to Excel Sheet
Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
data : begin of itab occur 0,
matnr like mara-matnr,
end of itab.
create new like this,
data : begin of itab occur 0,
matnr(12) type N,
end of itab. -
Problems while generating the proxy definition
Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil MishraIf you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a -
Locking Problem while calling BAPI
Hi ,
I am calling a BAPI in my wd appln . if there is some problem while executing the bapi like posting period not open then i am displaying the error of the BAPI . but after that i see in the locked tables through SM12 some tables gets locked .
so when i call the BAPI again it gives me error like the following tables are locked by the user... so is there any way by which i can release the locks hold by the bapi if problems occurs.
Regards
YashHi Yash,
Try the command ROLLBACK WORK if the error occurs.
This will remove all locks set by the BAPI.
Regards,
Jos -
Problem while exporting the data from a report to an excel file.
Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа Тип документа № учетной записи Дата документа Валюта Сумма, вкл. НДС Срок оплаты Описание документа
Current Text :
? 5 @ 0 F 8 8 ? > A G 5 B C
! 4 > : C "" 8 ? 4 > : C ! C G 5 B = > 9 7 0 ? 8 A 8 0 B 0 4 > : C 0 ; N B 0 ! C < ! @ > : > ? ; 0 B K ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash RajuHi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards -
Error while calling the PDF in BSP pages in ECC6.0: Question BSP Gurus
Hi BSP experts,
Any Experts have solutions for below.
We recently moved BSP pages into ECC 6.0 .Iam getting the error in BSP page while calling the PDF.
The scenario is like this: The PDF is getting called the via URL:
The code is like this
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf' INTO URL.
<u><b>This URL is called in the front end LAYOUT.</b></u>
<iframe src="<%= URL %>" width="100%" height="600px">
</iframe>you missed one question of mine <b>Do you create the PDF after creating the GUID ?</b>
try giving a fixed URL just to test.
Aman -
Problem while updating the Support Package 17 on my SAP WAS SP9
Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
SatyaHello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...). -
Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Problem while dowloading the file from Application Server
Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srinibut our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas
Maybe you are looking for
-
what do I use to connect my macbook pro to my tv to watch movies
-
Removing scrollbars on the JSP page of frames created by included JSP files
Hi All, In the iternet sales B2B application which we are developing, has a blank JSP file. Wherein we are adding other JSP files on it, loading trough JS. When we are adding it is making the various jsp files in the form of the frames, and
-
How to transport SAP Query SQ01??
Hi All, I am faced with a proble regarding the transportation of SAP query from the development system to the Production system.The following were the steps that I had taken: Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects
-
Macbook Pro Retina 13 inch Mid 2014 Bad battery.
Hello, 2 months after i got my macbook pro retina, my battery started dropping. For example, at 100%, it says 4 hours remaining, it used to have 8. I tried restarting PRAM, but nothing changed. It started to happen ever since i updated to Yosemite i
-
Show latest txn date within certain period
Hi I need to create a report in BIEE11g to find the latest txn date before May2013 and latest txn date before Jan2013 for each member as below: member_# latest_txn_date_before_May latest_txn_date_before_Jan abc1234 24/4/2013 20/12/2012 adf0987 12/2/2