Problem in "Diagnostic configuration" in Solution Manager 7 ehp1
Hi All
I try to execute "Diagnostic configuration" step in my solution manager 7.0 ehp1.
I have executed all the basic configuration in my SM.
I executed transaction solman_setup -> select step "Automatic
Configuration" -> "Diagnostic configuration" and appear this error
message:
Service cannot be reached
What has happened?
URL
http://<hostname>:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding
service is not available.
Must I activate any service from transaction sicf? if yes, which service must I activate?
Thanks in advance for collaboration.
best regards
giovanni
Hi!
We are facing the same problem.
http://xxxxxxxxxxxxx::8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp?APP_ID=ADMIN_INTROSCOPE_AGENT
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Did you find any solution to the issue? The note 1276263 is not availible.
/Anton Renberg
Similar Messages
-
Solution Monitoring configuration with solution manager 4.0
Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C -
EWA Configuration in Solution Manager 7.1 in SP08
Hi All,
Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
Warm Regards,
Sudhakar GHi
In addition to above also check below wiki link
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
and below as well
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
I assume you have done post setup etc
Regards
Prakhar -
AS Java (Config Wizard Configuration to Solution Manager)
Hello.
While I try to configure "NW:Solution Manager-AS Java(Config Wizard configuration to Solution Manager)" in NWA I receive the following error:
Error: Name or password is incorrect (repeat logon)
Step: J2EE User: SOLMAN with SID and Client extension
Why the program uses the user "CTC_NULL" (in the attached log) to login to the destination?
I never created such user.
I am grateful for every tip.
Log:
J2EE User: SOLMAN with SID and Client extension
Description
No specified detailed description
State
START_ACTION_ERROR
Result
A user with the name SM2CTCSMR001 exists in the System
Checking the step
Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
Take care that 'user' is selected in the combo box and enter the user name SM2CTCSMR001 into the input field, then press the 'Start' button
If the user exists, he will be shown in the table, if you select the entry you can see details about him
Executing the step manually
Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
Press the 'Create User' button
The create user dialog appears
Please execute following steps in the 'General Info' Tab to create the user:
In the input field Logon-Id enter the name SM2CTCSMR001
In the combo box 'Security Policy' select the entry 'System User (Internal RFC and Background Processing)'
Please enter a password and confirmation for the user
Press the save button to save the user
Support Information
Type of Action
InvokeServiceDebug Events
error message
Error: Name or password is incorrect (repeat logon)
InvokeService:J2EE User: SOLMAN with SID and Client extension
Library: sap.com/tclmconfig~content
SourcePath ./com_sap_sm_ctc_scenario_simulate/com_sap_sm_ctc_scenario_ui_process/ext_1206447991146/proc_1197052628227/proc_1207325025157/proc_1207755933502/maintainUser
Time 2012/02/29 at 08:46:42
WSDL content/common/service/usermanagement/maintainUser.wsdl
Destination parameters
user : CTC_NULL
password : % secure content %
host : host1
sysnr : 00
client : 000
language : EN
Execute Java Service
Library: sap.com/tclmctcutilcore_ear
Class: com.sap.ctc.util.core.services.UserFacade
Method: void com.sap.ctc.util.core.services.UserFacade.maintainUser(java.lang.String, java.lang.String, java.lang.String)
Arguments (3)
userName : SM2CTCSMR001
password : % secure content %
userType : password1
InvokeService- Result: ERROR
Refresh Env. Messages: false
Duration: 0.141 sec
Exception Class: com.sap.mw.jco.JCO$Exception
Exception Message: Name or password is incorrect (repeat logon)Hi,
As far as we could see, you're facing an authorization issue. To solve
that...
Can you check that the user executing the task (SOLMAN, i suppose) is
assigned the authorization - you can run an authorization trace using
transaction ST01 (check only the authorization box) and reproduce the
issue. The resulting trace should show which authorization failed. Once
this is established the necessary authority can be assigned to the user.
Thanks,
Regards
Vikram -
Solution Manager 7 EHP1 - Implimentation Help
Dear All,
I am new to Solution Manager.
I have install Solution Manager 7 EHP1 (ABAP+JAVA) on windows 2003 and applied later SP stack 24 available at Market place.
We have SAP ECC 6, ABAP stack (we have not install JAVA stack for DEV/QAS or PRD Servers).
On ECC 6 out landscap is DEV->QAS->PRD.
Now after installing Solution Manager 7 EHP1, I have done automatic configuration using SOLMAN_SETUP i.e. upto BASIC CONFIGURATION successfully.
Initially I want to use solution manager for
1. Support Patch Approval
2. SAP Note download
3.Service Desk
Now where and what I need to configure my DEV/QAS/PRD system to use above solution
Thanks in advance,
NiravHi,
Did you add your ECC landscape DEV/QAS/PRD in solution manager smsy?if not that would be first step to proceed.
1: Support patch approval check these links,you need to configure these in Solman system
https://websmp206.sap-ag.de/~sapidb/011000358700000086852008E.sim
www.alphasirius.com/Configuring_Using_MaintenanceOptimizer.ppt
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
2. SAP Note download
These setting can be done in individual system by configuring OSS connection to SAP
3:3.Service Desk
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Regards
Uday -
Solution Manager 7 EHP1 - Chage Host name and IP Address
Dear All,
I have installed Solution Manager 7 EHP1 (ABAP+JAVA Stack) on Windows 2003 64bit and working fine.
I need to change HOST name and IP Address of the machine.
In SAP where I need to change or reconfig ?
Thanks in advance,
NiravHello Nirav,
first of all: welcome to a big adventure!
There are some configurations you should face and prepare yourself before you change the hostname, or IP-Adress.
1. Be aware of the SMD-Agents. You should activate the Maintenace Mode in Diagnostics just before changing the hostname.
2. Do the changes in ABAP (profile parameters, transport configurations, RFC-connection settings, reorganization of table entries). The systemcopy guide is a good place for informations. Don't forget to recreate the trusted connections to and from the connected managed systems.
3. Do the changes in Java (use system copy guide for informations).
4. Every SMD-Agent in your system landscape must be reconfigured after you change the hostname and did the adjustments in ABAP and Java. Have look into the Diagnostics setup Guide for a detailed information about changing the conection parameters
5. If you are using a central DBACOCKPIT management in SolMan and Oracle, the TNSNAMES entry should be changed.
6. SAP likes to connect to SolMan, so the SAPROUTER entries schould be changed also.
7. Perhaps you are monitoring your system landscape with SAPCCMS Agents, then all agents in your landscape have to be changed in their configurations.
8. I have BI installed within SolMan and got an error page after changeing the hostname. Try this URL to make some corrections:
http://<hostname>:<Port>/webdynpro/dispatcher/sap.com/tcsmde2ewa/E2ewaConfig
Changing the hostname of SolMan isn't a small job and done in 60s. I suggest a detailed planning and to make a roadmap of all doings.
Have a lot of fun!
Sascha -
Solution Manager 7 EHP1 green/demo install
I am trying to set up a standalone SAP BI server with the demo content so I can test a product that queries InfoCubes. Windows 2003/SQL Server 2008 platform.
I am trying to follow the docs, but they assume some prerequites that are not clearly defined. I have a central system running with a license installed, but I cannot apply SNOTEs because I get an error in connection to destination SAPOSS.
Obviously I am missing something fundamental but I can't find a simple guide on what to do. The documentation seems to run in circles telling me to do things that don't work because I don't have the right SNOTEs installed.
Is there an easy way to get a SAPOSS connection for a non-production system?
Is there a guide that walks you through all the prerequisites for a Solution Manager 7 EHP1 install?> Is there an easy way to get a SAPOSS connection for a non-production system?
In order to download the SAP Note via SNOTE, the SAP OSS RFC connection should work. If your SAP Router is working fine, then add necessary entries in Tcode OSS1>technical Parameters . Add the router in the system data of the particular system in service market place.
> Is there a guide that walks you through all the prerequisites for a Solution Manager 7 EHP1 install?
Refer the installation guide in service.sap.com/instguides > SAP components > Solution Manager EHP1 .
Regards,
Nibu Antony -
Problem in Application Help Configuration in Solution Manager
Hi Experts,
Here I facing one problem during Application Help configuration..
When I am going through application help for Solman Configuration it's taking me to standard erp help..
Where as in SR13, under PlainHtmlHttp,
In path tab I had given <b>saphelp_sm40/helpdata</b> for solution manager document.
But for other standard t-code it's giving actual application help.
where for SMSY,SOLAR01 etc i am not getting the application help.
Looking for advices.
Thanks & Regards,
Sumanta ChatterjeeDear Sumanta,
This depends on how you want to (or how you can) use this http://help.
sap.com site.
At first you must be aware of the different areas on this site, these
areas have different URL structures, for example:
- http://help.sap.com/saphelp_erp2004 <<< for mySAP ERP
- http://help.sap.com/saphelp_47x200 <<< for R3 Enterprise
- http://help.sap.com/saphelp_nw04 <<< for SAP NetWeaver 04
- http://help.sap.com/saphelp_sm32 <<< for SAP Solution Manager 3.2
The main problem is that in the area "http://help.sap.com/saphelp_sm32"
there is only online documentation for the Solution Manager
functionality.
Can you please check the table SBAON_CCHK with transaction SE16.
The following record must exist:
MANDT COMPONENT NAME_EN
xxx ST Solar Help
If this record does not exist, please create this record manually.
This should help resolve the issue.
Regards
Amit -
Prblem Service Desk configuration in Solution Manager 4.0
Hi All,
Here I have done the configuration of Service Desk in Solution Manager 4.0 by using the document which I have for release 3.2. However I have face some problem in Step Initially create and Assign the Satellite Systems as iBase C and Manually create and Assign the Satellite Systems as iBase Co .So I exclude above mention step. But still I am able to create the support message from Satellite Systems.
So can please let me know whether it will work fine in upcoming time or Do I need to test my Service Desk configuration for same.
Moreover please let me know how to test Service Desk configuration for real time environment.
Following are the step and problem which I face while doing the Service desk configuration.
<b>STEP 1 #Initially Create and Assign the Satellite Systems as iBase C</b>
To be able to use the Service Desk and Change Request scenarios in SAP Solution Manager, you need to define the Installed Base (iBase). An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
The iBase components for the iBase structure SOL_MAN_DATA_REP (installation 1) can be created and assigned either automatically or manually. Note that these components and the assignments can only be created once automatically for every solution. To refresh your existing iBase data execute IMG activity Manually Create and Assign the Satellite Systems as iBase Components.
Requirements:-
You have defined your system landscape in the Solution Manager System Landscapes(transaction SMSY).
Activities:-
1. In transaction SOLUTION_MANAGER, open a solution.
2. Choose Operations -> Service Desk.
3. Choose Edit -> Initial Data Transfer for iBase.
The data is copied automatically. The iBase systems for the solution are automatically assigned to SOL_MAN_DATA_REP (installation "1"). An iBase component is created for each system installation number (which can be displayed by choosing System -> Status).
For each solution repeat these steps.
<b>Problem in STEP1 :-</b> I am not able to check the System  Status.
<b>STEP 2 #Manually Create and Assign the Satellite Systems as iBase Co</b>
In this IMG activity, you define the Installed Base (iBase) manually, i.e. for refreshing existing iBases after solutions have been changed.
An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
Activities:-
1. In transaction Change Installed Base (IB52), use the input help (F4) to find the Installed Base with external ID SOL_MAN_DATA_REP.
2. Continue as follows:
If SOL_MAN_DATA_REP does not exist:
a) Call transaction Create Installed Base (IB51).
b) Choose iBase Category 01 (Installed Base).
c) Choose Enter.
d) Specify the iBase header data in the iBase section.
e) Specify the external ID SOL_MAN_DATA_REP and enter a short description.
If SOL_MAN_DATA_REP exists:
a) Choose iBase No. 1 (SOL_MAN_DATA_REP).
b) Choose the SAP WEB AS component.
3. To assign the systems as iBase components, go to the Text item tab.
Three components are included in the standard package.
4. Add all the satellite systems as text items to the table:
o Column Short text: Description of the system
o Column Identification: System ID, space, installation number
5. Save.
After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
Note:-
Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
<b>Problem in STEP2:-</b> Here I am not able to find Text item tab as per point 3 .
<b>STEP 3 # Assign Business Partners to iBase Components</b>
You need to assign business partners to the new iBase components.
Activities:-
1. In transaction Change iBase (IB52), choose Goto -> Partner
2. Assign business partners with the following functions to the new iBase component systems:
o Administrator
o Key User
o Sold-to Party
3. Save.
4. Repeat these steps for each iBase component.
<b>Problem in step3 :-</b> In IB52 t-code screen there no any menu path like goto  partner
Thanks a lot,
HarshalHi Harshall,
You have to enter the value as 1 in Installed base field and then press enter.
You will be taken inside and then you will be able to see the Goto - Partner screen.
Hope this will help.
Please reward points suitably.
Regards,
Naresh. -
Post-Installation and Configuration of Solution Manager 7.1
Dear community,
we are a SAP Channel Partner and want to offer SAP BO support; therefore I am about to set up the Solution Manager 7.1 on a Windows 2008 R2 host with Oracle Database 11g. The installation has been completed successfully and I have applied our permanent license, but performing the following post-installation steps some problems and questions have arised. Because I don't want to write a novel right here, let's begin with the first issue:
Updating the Solman, as suggested in post-installation.
I want to update my ISS to SP 04 and followed the common instructions using ESPIN and SPAM (see, for example, this thread: ).
That means, all packages have been loaded from ESPIN into SPAM. The problem is, that I have SPAM version 0039, but I get error message "you need at least version 0040" when I try to start the update queue. Also, I am not able to download a newer version of SPAM from SMP (702-0043 and 702-0045 are available there), because I need MOPZ for that (a message comes up telling me that items in my download basket have to be confirmed before I am allowed to download them), which will be available not before basic configuration during solman_setup later on.
So, what to do? Is there another way to get that 5MB SPAM update or do I have to go on with the old version?
Thanks in advance
Sönke
Edited by: Sönke Schnurr on Dec 29, 2011 4:15 PM (small addendum)Okay, I am just re-installing my Solution Manager 7.1, because I couldn't solve my SPAM problem (linked thread in my next-to-last post).
I would like to configure the whole SAProuter SNC thing now. The Solution Manager host is the same which has the SAProuter installed. I have already registered and certified it and created the Windows Service which starts the SAProuter (saprouter -r -S 3299 -G routerlog -K u201Cp:CN=XXX, OU=YYY, OU=SAProuter, O=SAP, C=DEu201C), XXX and YYY being the appropriate values.
Now I want to create my saprouttable. A beta version is this one here, based on some tutorials in the internet:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 3200
1. deny all other connections
D * * *
Do you think it's alright? I'm connecting via host port 3299, so the first two lines should be alright, shouldn't they?.
The fourth line P ? The local IP address of my host? What is that line for at all?
Another question: The connection to OSS doesn't work yet, probably because of our local hardware router firewall. Which ports do I have to forward? I suppose it is just 3299?
An elaborate answer would be highly appreciated!
Regards
Sönke -
Problem with BI activation in Solution Manager
Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank youHi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue. -
Service desk configuration for solution manager
hi this ,
sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
can any body tell the configuration of satellite system to see reply message from solution manager ?
thanks and regards
sudheerkoppala@ g ma il .com>
sudheer koppala wrote:
> sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
> can any body tell the configuration of satellite system to see reply message from solution manager ?
There is no "message inbox" in satellite systems, but you can use the SAP Solution Manager to have a central access to all reported messages.
Configure Work Center "Incident Management" in SAP Solution Manager and grant access for message reporters.
See answers to similar question in accessing the service desk message from satellite system
Best regards,
Ruediger -
System monitoring configuration in solution manager EHP1
Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
RohitI'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt -
Problems with Stack 27 for Solution Manager
We are trying to install the stack 27 ,on Solution Manager based on Nw 701, but despite we downloaded all the packages listed with the MOPZ the SPAM transaction continue to arise consistency problems with the queue.
The package affected seems to be the SAPKITL437, but it's not clear why.
I'm not able to find any Oss notes for that.
Any advise ?Hi,
Did you check SAP Note No. 1274287 at section for your ST 400 version?
Attention: The Prerequisites for Managing sytem from
SAP Note No. 1274287 must be fulfilled at any time.
Regards,
Aidan -
CHARM configuration in SOLUTION MANAGER 4.0
Hi All,
Please help me to get the detailed documentation on configuring Change Request Management in SAP Solution Manager 4.0.
Thanks,
SateeshI have a question regarding the organization of Solutions in Solution Manager.
First, I have 3 solution manager boxes
1 Sandbox
2 Dev
3 Prod
In sandbox, I have a sandbox 'solution' that contains all sandboxes
In dev, I have no 'solution'
In production, I have all dev through production boxes lumped into one 'solution'.
I was thinking that maybe I should break up the solution in Production to have only prod boxes, and then build one in dev that contains dev and qa boxes.
My question is that when I configure CHARM to manager transports, will that work to separate DEV/QA from Prod OR will I need all the dev, qa, prod boxes in one 'solution' since that is how transports flow??
Maybe you are looking for
-
Multiple iTunes Accounts on One Computer
I just got an iPod Nano. My husband has an iPod Mini. He's been using iTunes fine for months with his Apple ID. I successfully set us up to each replicate just our playlists so we can both have our iPods in iTunes. However, I can't log in to iTunes.
-
Can't install calibre on windows 8.1
I just bought a new laptop with windows 8.1 inbuilt. I'm having issues installing Calibre on it. After the download, when i proceed to set up a pop up window shows up and the message "This installation package could not be opened. Contact application
-
First time to setup B1. Customer needs Local Currency is HKD, PO use China Yuan and System Currency is USD. 1. In Company Detail, Local-HK, System-USA, Default Account Currency should use All or Local? 2. GL COA each account need set Currency to HKD
-
Cannot view nor download files from web nor email attachments
-
Newbie trying to optimize webcam with ffplay
I am playing with ffplay to view my webcam: ffplay -f video4linux2 /dev/video0 -x 320 -y 240 According to v4l-info, this is my webcam's native resolution. I noticed, however, that the display is very delayed, i.e. if I move my head it takes more than