Problem in executing BAPI

Hi all
I am executing the bapi BAPI_PO_CREATE. I have initialized the BAPI input fields and populated with necessary inputs. But when i execute the bapi, i get no output. Output should be available in Model node Return. But i get nothing. The bapi is fine and the model input nodes also gets populated. Any help will be appreciated.
Thanks in Advance,
Regards
Rakesh ;>)

Hi All
Sorry for the late response. Actually the problem was with assigning inputs to the model data. Its solved now and the bapi is executing. But it shows an abort message in return structure.
    Msg Type A
    Msg.no   000000
    Code     ME159
    Message Function modules invoked in wrong sequence
Any help will be useful.
Thanks in Advance ;>)
Regards
Rakesh

Similar Messages

Execute BAPI for different input values and dispaly data in a table

Hi all,
I have a specific problem about executing BAPI multiple times for different input values and didplay result in a table.
I am using the code similar to the following logic.
Bapi_Mydata_Input in = new Bapi_Mydata_Input();
wdContext.nodeBapi_Mydata_Input().bind(in);
String in = wdContext.currentperdataElement.getnumber();
in.setDestination_From(10)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(20)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(30)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
And I want to display the data in a single table. I want the result in a table for Bapi execution based on input parameters passed 10,20 30.
But I am getting the table data only for the input parameter 30.I mean its actually display the data in table only for the last input parameter.
So May I ask you all if you know the solution for this problem.PLease advise me with some tips .or sample code is very much appreciated.I promise to award points to the right answer/nice advises.
Regards
Maruti
Thank you in advance.

Maruti,
It seems that WDCopyService replaces content of node, rather then adds to content.
Try this:
Bapi_Persdata_Getdetailedlist_Input frelan_in = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(frelan_in);
final Collection personalData = new ArrayList();
String fr1 = wdContext.currentE_Lfa1Element().getZzpernr1();
frelan_in.setEmployeenumber(fr1);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
String fr2=wdContext.currentE_Lfa1Element().getZzpernr2();
frelan_in.setEmployeenumber(fr2);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
wdContext.nodeNewPersonalData().bind( personalData );
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

SAP GRC RAR 5.3 SP9 "Cannot execute BAPI UserList"

Hi everyone,
After upgrading to 5.3 SP9, my client started experiencing some problems with RAR. I doubt it's linked to the upgrade, since I did all the testing and results were as expected. The problem is as follows:
Using RAR, for only one specific system (SAP ECC6 box), when running foreground AND background analysis for USERS, all analysis fails with the following error log (see below message). All ROLE analysis work as expected (SOD and critical actions/autorisations).
In the configuration tab, the connexion test is successful. I did some testing with a BASIS from the client and we identified that when running a successful analysis, we could log a RFC connection to the backend system (dont recall the transaction used though). When the analysis failed, no connexion was logged.
The client's GRC admin opened a ticket with SAP, but I was wondering if the collective knowledge of SDN could maybe help us identify the cause of our problems.
Any solution path is welcome
Kind regards
Jerome Fortin
========================================================================================
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
INFO: Foreground : Analysis starts: XL1360
Jan 18, 2010 2:19:09 PM com.virsa.cc.comp.VirsaXSR3_01Interface execute
WARNING: VIRSAXSR3_01: Cannot execute BAPI UserList
java.lang.ArrayIndexOutOfBoundsException
     at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10211)
     at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValue(JcoBaseTypeData.java:503)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getRelatedModelObjects(DynamicRFCModelClass.java:787)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.addRelatedModelObject(DynamicRFCModelClass.java:821)
     at com.virsa.cc.common.ModelNodeUtil._copyNodeTreeToModel(ModelNodeUtil.java:68)
     at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:52)
     at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3415)
     at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:409)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:302)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
     at com.virsa.cc.comp.BackendAccessInterface.searchUser(BackendAccessInterface.java:758)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchUser(InternalBackendAccessInterface.java:4279)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchUser(InternalBackendAccessInterface.java:4748)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:548)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
     at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
     at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
     at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
     at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
WARNING: Error :
com.virsa.cc.dataextractor.dao.DataExtractorException: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
     at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
     at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
     at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
     at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Foreground : Failed to run Risk Analysis
java.lang.Exception: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:127)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
     at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
     at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
     at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Yes, I am aware there might be an issue with the BAPI USER list execution, it is pretty excplicit in the message.
I was wondering if anyone has seen this error before and if someone can help me trace the source of the error. A message was already open with SAP before christmas and no solution was identified at the moment.
Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551) at
This can be translated to: Cannot extract data from the system P01, for more information look at the log file xxxx..
Edited by: Jerome Fortin on Jan 19, 2010 9:15 AM

Execute BAPI and bind input through inerfaceview

Hi all,
i am getting vendor no as URL parameter through start plug.
i need this parameter to give as input param to BAPI, here is my problem, i have to run the BAPI with this param and show the output data when user fires event in another app.
The parameter will some directly into interfaceview and then i have to bind the data in the custom cntroller, can i call execute bapi method of custom controller in the default mehod of interfaceview, in this case how can i pass the url param from interface view to custom controller before execution.
anyone has similar app or have some idea.
Chris.

Hi Chris,
In the interface view properties add the custom controller .then in the default plug of ur application u have the parameter then pass that parameter to the method which can be called in the default plug by getting the contoller usage..
wdThis.wdGetControllerName().MethodName();
In the methodName pass the parameter u get from start plug and write the code for BAPI execution....
Regards,
Yash

Locking Problem while calling BAPI

Hi ,
I am calling a BAPI in my wd appln . if there is some problem while executing the bapi like posting period not open then i am displaying the error of the BAPI . but after that i see in the locked tables through SM12 some tables gets locked .
so when i call the BAPI again it gives me error like the following tables are locked by the user... so is there any way by which i can release the locks hold by the bapi if problems occurs.
Regards
Yash

Hi Yash,
Try the command ROLLBACK WORK if the error occurs.
This will remove all locks set by the BAPI.
Regards,
Jos

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi i want to execute bapi two times with different paramters....Possible

Hi,
i want to execute bapi twice times.Possible please explain where i put which code.Means i put bind code at doinit() method of conpopnent controller and execute bapi code in doinit() iof view. But for second time where i put bind and execute code.
Regards,
Gurprit
Edited by: GURPRIT BHATIA on Dec 17, 2007 1:24 PM

Hi Gurprit,
For executing the bapi second time, you can put the execute bapi code in the action of the button which is on your form. You need not write the bind code again.
Bye
Ankur

Problem with mutiple BAPI calls during the commit

Hi all,
I am trying to create accounts for a given partner i the transaction F9K1 using the BAPI BAPI_BKK_ACCNT_CREATE. After calling the BAPI I am committing it too.
The problem is if I try to create multiple accounts like RCA, ACA, MCA, IOE and so on, the first time the BAPI is called to create RCA account it is successful an it is even committing. When I call the BAPI to create the the ACA account the return table from the BAPI shows success message but the commit fails. If I restart the program and try creation of accounts now the RCA will throw a error msg saying account already exist, ACA account will be created and then the MCA account creation fails in the same manner explained above.
I see the issue is with multiple BAPI calls and I tried using all sort of methods like clearing buffers, start new task in local and wait command and all. But none of them seems to be working for me.
Can anyone please guide me on how I can overcome this problem.
Thanks.

BAPI :
BAPI BAPI_BKK_ACCNT_CREATE
Functionality
Use this method to create an account in Bank Customer Accounts. This method returns the following values:
Identification details for the newly created account such as the internal and the external account number, and the bank area details
A table containing error messages
To create an account by using this method, you must specify values for the import parameters Bank Area (BANKAREA) and Product (PRODUCTNAME).
Note: You must also specify a value in the External Account Number (EXTERNALACCOUNTNR) parameter if you have defined an external number range for the bank .
REgards,
Jayan.

Problem While Executing T.CODE DP90

Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1.     We are creating Sales Order and system will create Service order automatically as per the configuration.
2.     In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
   Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PM

Hi Prashanth,
      Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of   Cost element and Blank activity type so, we are getting different material in DP90.

Problem in executing the adobe form

Hi,
Using the SFP tcode i have createda an interface and a form for that interface.
i have to import parameters from vbap table which i have mapped in the form..there is no problem while executing and activating the form...
but while i am executing the form after passing the values i am getting an exception : SYSTEM ERROR
Meassage ID: FPRUNX
ADS: SOAP Runtime Exception: CSoap Exception Transport.
Are the forms craeted using SFP tcode are Standalone forms i.e. non-interactive forms?

Hi friend,
Its not like that the Adobe created using SFP is non interactive.
We can create interactive forms using SFP transaction using java code.
I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
Just check this and revert me if you have any issues. I will help you
Thanks,
Sri Hari

Problem in executing JFCunit test case

Hi all,
I have problem in executing a simple test case that checks for input blank fields entered.
Below is the code for the test class that i am trying to run, but i am unable to execute it. Please can anyone try to resolve this.
package unittest.com.erp;
import junit.extensions.TestSetup;
import junit.extensions.jfcunit.*;
import junit.extensions.jfcunit.finder.*;
import junit.extensions.jfcunit.eventdata.*;
import junit.framework.Test;
import junit.framework.TestSuite;
import junit.textui.TestRunner;
import com.erp.client.swing.ClientLoginDialog;
import com.erp.client.swing.workspace.ClientWorkspaceFrame;
import com.erp.client.swing.workspace.data.LoginResults;
import javax.swing.*;
public class LoginScreenTest
    extends JFCTestCase {
private ClientLoginDialog loginScreen = null;
private JButton login = null;
private JButton cancel = null;
private JTextField username = null;
private JTextField password = null;
private JFCTestHelper helper = null;
LoginResults loginSuccess = null;
ClientWorkspaceFrame workspaceFrame = null;
public LoginScreenTest() {
public LoginScreenTest(String name) {
    super(name);
public static Test suite() {
    return new StartApp(new TestSuite(LoginScreenTest.class));
private static class StartApp
      extends TestSetup {
     * Construct the test decorator, which starts the application     *
     * @param test
     *          Test case.
    public StartApp(final Test test) {
      super(test);
     * Start the LoginScreenTestapplication.
    public void setUp() {
      new Thread(new Runnable() {
        public void run() {
          try {
            new LoginScreenTest().setUp();
          } catch (Exception e) {
      }).start();
      try {
        Thread.currentThread().sleep(10000);
      } catch (InterruptedException ex) {
     * Tear down the LoginScreenTest application.
    public void tearDown() {
protected void setUp()
      throws Exception {
    super.setUp(); // Choose the text Helper
    setHelper(new JFCTestHelper()); // Uses the AWT Event Queue.
    // setHelper( new RobotTestHelper( ) ); // Uses the OS Event Queue.
    ClientWorkspaceFrame workspaceFrame = ClientWorkspaceFrame.getHandle();
    // loginScreen = new ClientLoginDialog( "LoginScreenTest: " + getName());
    loginSuccess = ClientLoginDialog.login();
    loginScreen = ClientLoginDialog.login(new JFrame(), true);
    if (loginSuccess != null && loginSuccess.isSuccess()) {
      workspaceFrame.initFrame();
      workspaceFrame.loggedInUser = loginSuccess.getName();
      workspaceFrame.loggedInFullUserName = loginSuccess.getFullLoginUserName();
      workspaceFrame.loggedInUserPassword = loginSuccess.getPassword();
      workspaceFrame.setVisible(true);
      workspaceFrame.validate();
        flushAWT();
protected void tearDown()
      throws Exception {
    login = null;
    cancel = null;
    username = null;
    password = null;
    loginScreen = null;
    flushAWT();
    // getHelper.cleanUp( this );
    super.tearDown();
public void testInitialState() {
    NamedComponentFinder finder = new NamedComponentFinder(JButton.class, "Cancel");
    finder.setName("Cancel");
    JButton exitButton = (JButton) finder.find(loginScreen, 0);
    assertNotNull("Could not find the Exit button", exitButton);
    NamedComponentFinder finder1 = new NamedComponentFinder(JButton.class, "Login");
    finder1.setName("Login");
    JButton enterButton = (JButton) finder1.find(loginScreen, 0);
    assertNotNull("Could not find the Enter button", enterButton);
    getHelper().enterClickAndLeave(new MouseEventData(this, enterButton));
    assertEquals("", workspaceFrame.loggedInUser);
    assertEquals("", workspaceFrame.loggedInUserPassword);
public static void main(final String[] args) {
    TestRunner.run(LoginScreenTest.suite());
Thanks & Regards,
VishalMessage was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vj

hi All,
can any one guide me how to run the test casese in JFCunit ? as when i tried to run thru command prompt its not recognising the main class at all.
Now i m trying with eclipse problem here is that it is showing error to this line of code
DialogFinder dFinder = new DialogFinder(loginScreen);
error is constructor is undefined?
So looking for some solution.
with regards
kin

Problem in executing a javascript link on a jsp page

I am having a problem in executing a javascript function from a link. For example if i click some link let say Discover and behind the scene some applet method is supposed to be called, but it is not called? However the the function name comes in the url area (address bar of internet explorer) like javascript:document.switchApplet.discover()
Can anybody help me solving this problem?
Moreover, just for a hint, i think i have deleted some registery value of such time so that's why it is not working. But i am not sure.

what is d error u r getting ???
Is it java script error? yes then u can find the line no.
view the source code or ur page and find whether ur .js is including properly or not? means whether the path is correct ?

Problem in executing EXE from browser-URGENT

Hi all,
I am facing a problem in executing "c exe" file from my web based application, iam using IAS
on Solaris. my program is able to catch the path but its not executing (this is wirking fine in windows) i am giving a sample code here
Runtime rt=Runtime.getRuntime();
Process pro=rt.exec("/datadisk1/java/runsol.exe");
pro.waitFor();
runsol.exe will generate s text file when executed, when i run this in a independent java program then it is executing, on browser it is not executing and output text file is not creating.
Note: i am working on Solaris / Oracle AS 9i
Thanks
Bye.

Security issue. Calling .exe from applet not possible by default.

Problem in executing function module: ERROR_IN_PDO: ERROR_IN_PDO

Hi all,
I am getting an error I can't solve until now.. Who can help?
The Default Trace in the EP 7.0/NWA gives the following information:
Severity: Error
Message: Problem in executing function module:[date]:com.sap.mw.jco.JCO$AbapException: (126) ERROR_IN_PDO: ERROR_IN_PDO
Category: /uwl/service
Location: com.sap.netweaver.bc.uwl.core.connect.abap.FunctionModuleActionHandler
Application: sap.com/tcwddispwda
The UWL connection tests are correct! So, who can help!
There is nothing to find in sap notes or sdn forum
Best regards,
G. Leurs

Hi john,
I am also facing hte same issue.
when the user is trying to approve the Compleated shopping cart from the button availble in the UWL preview , I am getting the below error.
Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.mw.jco.JCO$AbapException:ERROR_IN_PDO
we are not passing any ABAP role from teh SRM system.
it would be great if you can share your views regarding this.
Raji

Executing bapi with jspdynpage

sample application executing bapi with jspdynpage with step by step procedure

Hi
Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/95/cfa441cd47a209e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/d2a441cd47a209e10000000a155106/content.htm
http://devnetmedia.sap.com/html/submitted_docs/htmlbManuals/HTMLB-TableView-01.html
http://help.sap.com/saphelp_nw04/helpdata/en/df/a36a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
http://etower.towersemi.com/irj/portalapps/com.sap.portal.pdk.basic.portalcomponentimplementation/docs/jspdynpage.html
Regards,
Sundaresan

Problem in executing BAPI

Similar Messages

Maybe you are looking for