SAP GRC RAR 5.3 SP9 "Cannot execute BAPI UserList"
Hi everyone,
After upgrading to 5.3 SP9, my client started experiencing some problems with RAR. I doubt it's linked to the upgrade, since I did all the testing and results were as expected. The problem is as follows:
Using RAR, for only one specific system (SAP ECC6 box), when running foreground AND background analysis for USERS, all analysis fails with the following error log (see below message). All ROLE analysis work as expected (SOD and critical actions/autorisations).
In the configuration tab, the connexion test is successful. I did some testing with a BASIS from the client and we identified that when running a successful analysis, we could log a RFC connection to the backend system (dont recall the transaction used though). When the analysis failed, no connexion was logged.
The client's GRC admin opened a ticket with SAP, but I was wondering if the collective knowledge of SDN could maybe help us identify the cause of our problems.
Any solution path is welcome
Kind regards
Jerome Fortin
========================================================================================
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
INFO: Foreground : Analysis starts: XL1360
Jan 18, 2010 2:19:09 PM com.virsa.cc.comp.VirsaXSR3_01Interface execute
WARNING: VIRSAXSR3_01: Cannot execute BAPI UserList
java.lang.ArrayIndexOutOfBoundsException
at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10211)
at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValue(JcoBaseTypeData.java:503)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getRelatedModelObjects(DynamicRFCModelClass.java:787)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.addRelatedModelObject(DynamicRFCModelClass.java:821)
at com.virsa.cc.common.ModelNodeUtil._copyNodeTreeToModel(ModelNodeUtil.java:68)
at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:52)
at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3415)
at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:409)
at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:302)
at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
at com.virsa.cc.comp.BackendAccessInterface.searchUser(BackendAccessInterface.java:758)
at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchUser(InternalBackendAccessInterface.java:4279)
at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchUser(InternalBackendAccessInterface.java:4748)
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:548)
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
WARNING: Error :
com.virsa.cc.dataextractor.dao.DataExtractorException: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:702)
at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:121)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Jan 18, 2010 2:19:09 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Foreground : Failed to run Risk Analysis
java.lang.Exception: Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log
at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:127)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1344)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:311)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:237)
at com.virsa.cc.ui.UserSelection.onActionExecute(UserSelection.java:634)
at com.virsa.cc.ui.UserSelection.onActionConfirmExecute(UserSelection.java:1858)
at com.virsa.cc.ui.wdp.InternalUserSelection.wdInvokeEventHandler(InternalUserSelection.java:1287)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Yes, I am aware there might be an issue with the BAPI USER list execution, it is pretty excplicit in the message.
I was wondering if anyone has seen this error before and if someone can help me trace the source of the error. A message was already open with SAP before christmas and no solution was identified at the moment.
Impossible d'extraire les donn?es du syst?me (P01R3S010) ; pour plus d'information, reportez-vous ? ccappcomp.n.log at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551) at
This can be translated to: Cannot extract data from the system P01, for more information look at the log file xxxx..
Edited by: Jerome Fortin on Jan 19, 2010 9:15 AM
Similar Messages
-
Allowed variables in SAP GRC RAR messages
Hi experts,
I'm using SAP GRC AC 5.3.
In RAR, I want to configure message 0269 in cc_messages.txt file in order to change text including the description of the mitigation control.
Does anybody knows what's is this variable name ? Or even, where can I find a list of allowed variables for insertion in messages ?
Thanks,
Roque.Roquevalder,
I understand your question now. I see the message you are talking about:
VIRSA_CC_MSG 0269 EN error The mitigating control was updated by #_!USERID#_! on #_!DATE#_! at #_!TIME#_!. This email serves a notification that you have been #_!STATUSCHANGED#_! as the monitor for : #_!LINESEP#_! #_!LINESEP#_! #_!LINESEP#_! #_!CONTROLIDTEXT#_! #_!CONTROLID#_! #_!LINESEP#_! #_!HROBJTYPELINE#_! #_!LINESEP#_! #_!OBJECTTYPE#_! #_!OBJECTID#_! #_!LINESEP#_! #_!ORGRULELINE#_! #_!LINESEP#_! #_!RISKIDTEXT#_! #_!RISKID#_! #_!LINESEP#_! #_!LINESEP#_! #_!MONTEXT#_! #_!MONITOR#_! #_!LINESEP#_! #_!LINESEP#_! #_!VALIDFROMTEXT#_! #_!VALIDFROM#_! #_!VALIDTOTEXT#_! #_!VALIDTO#_! #_!LINESEP#_! #_!LINESEP#_! #_!STATUSTEXT#_! #_!STATUS#_!
But at the end of the file you have something like this:
D VIRSA_CC_MSGPRMS 0269 EN CONTROLIDTEXT CONTROLIDTEXT
D VIRSA_CC_MSGPRMS 0269 EN CONTROLID CONTROLID
D VIRSA_CC_MSGPRMS 0269 EN HROBJTYPELINE HROBJTYPELINE
D VIRSA_CC_MSGPRMS 0269 EN ORGRULELINE ORGRULELINE
D VIRSA_CC_MSGPRMS 0269 EN RISKIDTEXT RISKIDTEXT
I guess if you want to add a value in the message you have also to define it at the tail of the file.
My advice is to open a OSS message to ask for this functionality. You shouldn´t change it manually. Take into account that this file must be uploaded each time you update your GRC java components. So, if you make a custom change, you have to repeat that change every time you update. So I think you should ask SAP for this. They will probably include this field in next patches.
Regards,
Diego. -
SAP GRC RAR Rules Generation Job Error - SP13 application
Hello,
we applied SP 13 on GRC and RAR Rule Generation job is always in "error" status; below I list an example of job log:
INFO: -
Scheduling Job =>237----
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:237 (RULE_GENERATION) - generate f113
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1007
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 237 Status: Running
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is generate f113 started :threadid: 1
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=237, status=1, message=generate f113 started :threadid: 1
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1007
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob ruleGeneration
INFO: @@@--- Rule ruleGeneration Started ....237
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: null
java.lang.NullPointerException
at com.virsa.cc.xsys.bg.BgJob.ruleGeneration(BgJob.java:1245)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:609)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 237 Status: Error
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:null
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=237, status=2, message=Error while executing the Job:null
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>237----
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock lock
WARNING: It is used by the same owner: For current thread retrying to get lock : 1001
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1001
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1001
Is there someone that can help me?
I checked and it seems that "Use NetWeaver Logical Lock" in config tab has to be set to "No"...is it correct for you or have you got other tips?
Thx to allHello,
actuallt current values are:
Row CNFGPARAM| CNFGSEQ| CNFGVALUE|
35 250 0 NO
36 251 0 YES
Value for 250 is ok based on your feedback.
Value for 251 is based on SNOTE 1508611, even if SDN forum suggests "0" against the note.
Have you got any tips? -
Hi all,
I´m interested in getting some templates for planning and describe a detailed Cutover Plan for SAP GRC Access Control, which includes all activities for performing in each one of the modules for SAP GRC (RAR, ERM, CUP and SPM).
Anybody has some template or related information for prepare cutover plan for SAP GRC AC?
Thanks in advance,
SantiagoHi Santiago,
here you could find a AC5.3 Project Plan:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b00a372f-ddb7-2b10-88aa-d6eaae69a756
And this is the Pre-Installation Checklist:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50692df1-67da-2b10-2995-84a0d0c82193
Best,
Frank -
Hello,
I have a doubt.
The users of the modules of the SAP GRC AC 5.3 have to created in the UME of the EP Core, is that right?? And thet add the roles of each user for each module (RAR, CUP, SPM, ERM), is that right?
Best Regards.
Pablo Mortera.Hi Pablo,
To access GRC AC 5.3 you can create one UME user and assign different roles related to four GRC component.
Or you can create different GRC user and assign respective components roles.
The example of GRC Admin role are.
AEADMIN
READMIN
VIRSA_CC_ADMINISTRATOR
regards,
Sudip, -
SAP GRC AC 5.3 RAR Background jobs are cancelled
Hi Experts,
we have newly implemented theS AP GRC AC 5.3 RAR Help me in troubleshooting the Background jobs cancellation in SAP GRC AC5.3 RAR.. we have reported this issue to customersupport they asked us to upgrade the front end patch level to Sp15, even we upgraded still i have the same problem.. later we upgraded the backend patch according to the SAP Note. still the problem is not resolved.
Latest recommendation they are asking us to uninstall the SMD agent.. and also my java control.exe is showing yellow color
help me how to resolve the issue.??
Edited by: n.s.k mohan on May 10, 2011 6:21 AMHi,
Could you please first change RAR log settings to Java logger then take a restart of the system. After that log for your background will start coming in RAR. Then schedule the job if it fails then paste background job log here.
Also, in future, please raise GRC related issue in GRC forum so that you can get more replies.
Thanks
Sunny -
GRC RAR version relative to SAP upgrade to ECC 6
Hi,
Currently we are on GRC RAR version AC-RAR 5.3-13.3. We are upgrading our SAP from ECC 5 to ECC 6 and the latest support pack. What GRC RAR version do we need to be on to identify any potential SOD issues on the ECC 6 system? Are there any other potential pitfalls that we should be aware of?
Thanks,
John BurkHello John,
Are you using a customized rule set?
SAP provides rule updates periodically:
For example:
1446680 - Risk Analysis and Remediation Rule Update Q2 2010
You'll find that some specific changes are performed in these rule updates, and some of these changes are only for ECC 6.
You might want to check also here:
Note 986996 - GRC Access Control- Best Practice for Rules and Risks
Then, the point is not the GRC version, but the rule set. Of course, you have to upgrade the RTAs.
Cheers,
Diego. -
Rule converstion from Approva to SAP GRC AC RAR 5.3
Hello All,
We have rule files of approva in XML format , please let me know is there any short cut mettod or process to change it into SAP GRC Rule files
Please help me on this.....
Thanks in advance
JagatJagat,
the import file structure is documented in the appendix of the configuration guide.
Now all you need is a PERL or XML style sheet wizard to make one into another (or the ability to generate a flat file download you can work with in Excel).
Frank. -
SAP NetWeaver 2004s SR 1 SP9 INSTALL
I spent last week trying to install SAP Netweaver 2004s SR 1 SP9 in XP SP2 with no success.
The JDK version is 1.4.2_09 and the install process fail in step "Import Java Dump", the <i>sapinst.log</i> indicates the error:
14-dic-2007 11:55:30 com.sap.inst.jload.Jload dbImport
GRAVE: <b>DB Error during import of J2EE_CONFIGENTRY</b>
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: Message: Cannot assign NULL to host variable 2. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO J2EE_CONFIGENTRY( CID , NAMEHASH , ISFILE , NAME , DTYPE , VBIGINT , VDOUBLE , VSTR , VBYTES , FBLOB ) VALUES ( ? , ? , ? , ? , ? , ? , ? , ? , ? , ? )".
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: SQLState: SAP06
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: ErrorCode: 1001142
14-dic-2007 11:55:31 com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
ERROR 2007-12-14 11:55:31
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\install\sltools\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib/iaik_jce.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jload.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/antlr.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/exception.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jddi.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/logging.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/offlineconfiguration.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/opensqlsta.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec J2E,jdbc/pool/J2E,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/Programas/SAPNW2004sJavaSP9_Trial/SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\../Sneak_Preview_Content\JAVA\JDMP -job "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/jload.java.log' for more information.
ERROR 2007-12-14 11:55:31
FCO-00011 The step importJavaDump with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2007-12-14 11:55:38
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
I have read many posts in many forums and there are some posts about the same problem of the table J2EE_CONFIGENTRY, but never clear answers (or answers for Linux OS). I really appreciate any help about it.
PD: No, it's not the timezone configuration (I have GMT+1 and daylight saving enabled).Hi Friends!
This is Anand Here
I am totally new to SAP
I was trying to install SAP on 2003Server
while installing the ABAP System-Central Instance
I Got this error message
An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
The following error occured and the installation could not proceed
ERROR 2007-12-27 20:33:33
- FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
ERROR 2007-12-27 20:33:33
MOS-01235 Module function getInfo of module CIa0sMount Failed,
Can Somebody help me with this -
Hi all,
Two questions regarding mitigation in SAP GRC AC:
1)
Reading through the forum, we have seen that if monitor does not execute the report (action) within the frequecny set and alert is generated. Are these alerts sent out to the mitigation controls' approvers automatically or need to be triggered by executing alerts generation with mitigation flags set?
2)
If WF is set and appropriate configuration is set in RAR, approver activities in CUP are approval for mitigation control maintenance and mitigation control assignment. Is this correct?
Thanks in advance. Best regards,
ImanolHi Imanol,
Here is my response:
1) Reading through the forum, we have seen that if monitor does not execute the report (action) within the frequecny set and alert is generated. Are these alerts sent out to the mitigation controls' approvers automatically or need to be triggered by executing alerts generation with mitigation flags set?
You need to go to Alert Generation -> Select Generate Alert log, Control Monitoring under Action Monitoring and Alert notification.
2) If WF is set and appropriate configuration is set in RAR, approver activities in CUP are approval for mitigation control maintenance and mitigation control assignment. Is this correct?
Yes, that is correct.
Regards,
Alpesh -
Hi There,
In SAP GRC 10.0, our team had an issue where we could not add duplicate fields from separate table (see ERROR: Select Currency/UoM field for the selected analyzed fields). This was resolved by the SAP Note 1904313/ 1904314 (http://service.sap.com/sap/support/notes/1904313).
We upgraded our system to SAP GRC 10.1 SP05 and could now add the duplicate fields from separate tables. SAP Note 1904313/ 1904314 was part of SAP GRC 10.1 SP03 so it makes sense that we, in a higher version (SP05), would be able to do this.
The issue now is when we add the duplicate fields from different tables and run the Ad-hoc Query to test if the data source works correctly, the No Data Selected warning persists. This means that the data source provides no data for analysis, which is required to write our business rules.
Below is an example:
Basic data source with just one currency reference field EBAN-WAERS.
When you run the Ad-Hoc Query you receive data.
Basic data source with second currency reference field EKKO-WAERS.
When you run the Ad-Hoc Query no data is found.
Please also make reference to the following thread logged by my colleague (ERROR: Select Currency/UoM field for the selected analyzed fields)
Any assistance to receive data with duplicate fields from separate tables will be highly appreciated.
Thanking you in advance.
Regards
Gary KhanHi
following are the error messages from dump
hrtText
There is already a line with the same key.
hat happened?
Error in ABAP application program.
The current ABAP program "SAPLCKMS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
rror analysis
You wanted to add an entry to table "\FUNCTION-POOL=CKMS\DATA=T_DYN_CKMLCR",
which you declared
with a UNIQUE KEY. However, there was already an entry with the
same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
In particular, you cannot insert more than one initial line into a
table with a unique key using the INSERT INITIAL LINE... statement.
rigger Location of Runtime Error
Program SAPLCKMS
Include LCKMSF01
Row 226
Module type (FORM)
Module Name DYNAMIC_PERIOD_CLOSING
Source code where dump ocured
222
223 APPEND ht_ckmlpp TO t_add_ckmlpp.
224 APPEND LINES OF ht_ckmlcr TO t_add_ckmlcr.
225 INSERT ht_ckmlpp INTO TABLE t_dyn_ckmlpp.
>>>> INSERT LINES OF ht_ckmlcr INTO TABLE t_dyn_ckmlcr.
227 ENDWHILE.
Also I guess there is problem with material ledger in R/3 side
I have never worked on material ledger before so dont hav idea of Tcode and tables in SAP R/3 for material ledger.
Thanks
Navneet -
Migrate SAP GRC AC 5.3 SP13 (System A - System B)
Hello all,
currently we have setup 2 SAP GRC AC 5.3 SP13 SAP instances (DEV / PRD) for the customer's SAP ERP system landscape. Those systems also contain some customer business functionality.
Because of business requirements the PRD Java Instance needs to be deleted and built up again from scratch with another WebAS Java Release Version (same SID, same Hardware, etc.).
Our plan is now to setup a dedicated Java instance which will contain the PRD installation of SAP GRC AC (new SID, different hardware, etc.) to avoid similar problems in the future. Therefore we have to migrate all of the RAR data from the "old" Java instance to the newly setup Java system. We especially need to migrate all of the RAR analysis data (e.g. SoD violation analyses of previous months, etc.), otherwise we would loose all of this information when the "old" installation is deleted and built up again.
I have checked all of the SAP documentation for SAP GRC AC 5.3 and only found these clues:
In document "SAP GRC AC 5.3 Configuration Guide v3.16 - Chapter Utilities -> Export Utility / Import Utility" it only says
something about exporting / importing rule sets, mititgating controls, etc. Can these tools also be used to export / import
analysis data too ?
In document "SAP GRC AC 5.3 Installation Guide v2.2 - Chapter Post-System Copy Configuration" it only says something about
steps to be executed if the SAP GRC AC installation was done via system copy. But there is no information about migrating RAR analysis data.
In document "SAP GRC AC 5.3 Operations Guide v2.1 - 7.2 Backup strategies" it says that in order to restore the system "you need to back up all tables with the following prefixes: VIRSA and VT". Can we simply do a backup of all of those tables, import
them into the database of the new system and the use the export/import utility to move all of the configuration etc. from the old system to the new one ?
Regards,
Benjamin
Edited by: Benjamin Schlotz on Jun 30, 2011 11:57 AMHello Sunny, hello Frank,
thanks for the quick replies.
I did know about the SNOTE regarding the post migration steps, but the To-Do's Frank posted had some additional info in them.
One question remains still open though:
How to actually migrate all the GRC AC RAR data (incl. old analysis data) from System A to System B
Our intended course of action would be:
1. Deploy SAP GRC AC on System B (same Version, SP-level etc. as in System A)
2. Export all VIRSA* and VT* tables from DB of System A, import them all in DB of system B
3. Export all configuration, etc. from System A, import it into System B (using the export / import functionality within RAR)
4. Do all the post-migration tasks described by you
Would you agree with that course of action / know any pitfalls, etc ? We need to have all the "old" RAR analysis data from System A in System B after the migration because System A will be shutdown and deleted.
Regards,
Benjamin -
Data Federator: Insufficient memory : Operator 'HashJoin' cannot execute
Hi,
I'm using: SAP BusinessObjects Data Federator Designer XI 3.0 Service Pack 3 - 12.3.0.0 (Build 1011241842)
I have a virtual view on top of sql server 2007 and teradata. I am using a view on sql server 2007 that joins against several tables and querying a single table from Teradata.
When I try to query the view I get the error: [Data Federator Driver] [Server] Insufficient memory : Operator 'HashJoin' cannot execute because it cannot allocate the minimal number of memory pages. Please contact the system administrator to change system parameter settings. (0)
This happens when I try to query the view from data federator or from an odbc connection.
I tried playing with the configuration settings for core.queryEngine.hash.maxPartitions and
core.queryEngine.hashJoin.nbPartitions and nothing seemed to work in terms of changing/increasing the numbers. The help guide also gave no help: http://help.sap.com/businessobject/product_guides/boexi3SP3/en/xi3_sp3_df_userguide_en.pdf
I was using a very similiar query against a materialized view on Oracle and Teradata before and that worked. But I'd prefer not to have to materialize the view in Sql Server.
Any thoughts as to how this can be fixed?
Thanks,
Kerby<rant>The strange thing with this forum is no people, really no people, ever do anything to resolve their own problems, even though this forum has a search function, and sites with FAQs and assistance are floating around over the Internet. Why is a mystery, as nobody uses them, and most DBAs only know how to hit copy-and paste, to add to the clutter on OTN again.</rant>
The usual steps to troubleshoot an ora-1031 apply.
This means
- verify whether the local administrator is in the ora_dba group and sqlnet.authentication_services in sqlnet.ora has been set to (NTS)
- in absence of these, there should a password file be present in %ORACLE_HOME%\database, named pw%SID%.ora
These belong to the common documented requirements, and these requirements shouldn't be repeated everywhere.
Sybrand Bakker
Senior Oracle DBA
Experts: Those who do read documentation. -
Problem in SAP WAS Java 6.40 SP9 and MaxDB 7.5 Preview installation
I am trying to install SAP WAS Java 6.40 SP9 and MaxDB 7.5 I have received the following error.
Can somebody help me to resolve this.
Thanks
kishor
SAPinst is getting started.
Please be patient ...
guiengine: no GUI connected; waiting for a connection on host DB6D1T61, port 21212 to continue with the installation
guiengine: login in process.
INFO 2005-05-29 16:01:09 [syxxcfile.cpp:325]
CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2005-05-29 16:01:09 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2005-05-29 16:01:09 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\q0w9e9r8t7.1.xml.
INFO 2005-05-29 16:01:10 [syxxcfile.cpp:325]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
INFO 2005-05-29 16:01:10 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
INFO 2005-05-29 16:01:10 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\keydb.1.xml.
INFO 2005-05-29 16:01:11 [ianxbusprv.cpp:337]
CIaNtUserPrivileges::add_impl(., DB6D1T61\Kishor Kolhe, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'DB6D1T61\Kishor Kolhe' on host '.'.
INFO 2005-05-29 16:01:15 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\summary.html.
PHASE 2005-05-29 16:01:15 [iaxxcwalker.cpp:416]
CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO 2005-05-29 16:01:20 [iaxxcwalker.cpp:59]
CDomWalker::walk()
Installation start: Sunday, 29 May 2005, 16:01:07; installation directory: C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> MaxDB> Central System> Custom Installation - Java System
INFO[E] 2005-05-29 16:01:22 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2005-05-29 16:01:22
CJSlibModule::writeInfo_impl()
Looking for SAP system instances installed on this host...
INFO 2005-05-29 16:01:22
CJSlibModule::writeInfo_impl()
No installed instances found!
INFO 2005-05-29 16:01:22
CJSlibModule::writeInfo_impl()
DNS is configured correctly.
INFO[E] 2005-05-29 16:01:23 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2005-05-29 16:01:45 [syxxcfile.cpp:325]
CSyFileImpl::copy(const CSyPath & ., ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/WAS6.4J2EE_NEW/WebAS/J2EE_OSINDEP/JDKVersion.xml to: ..
INFO 2005-05-29 16:01:45 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & ., ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/WAS6.4J2EE_NEW/WebAS/J2EE_OSINDEP/JDKVersion.xml to: ..
INFO 2005-05-29 16:01:45 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\JDKVersion.xml.
INFO[E] 2005-05-29 16:01:45 [syxxccuren.hpp:189]
CSyCurrentProcessEnvironmentImpl::getEnvironmentVariable(iastring)
Unable to get value for environment variable JAVA_HOME.
INFO 2005-05-29 16:01:46
CJSlibModule::writeInfo_impl()
Execution of the command "C:/j2sdk1.4.2_08/bin/java.exe '-version'" finished with return code 0. Output:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
INFO 2005-05-29 16:01:47
CJSlibModule::writeInfo_impl()
Execution of the command "C:/j2sdk1.4.2_08/bin/java.exe '-classpath' 'C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/ins-j2ee.jar;C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/sapxmltoolkit.jar' 'com.sap.ins.j2ee.TestClassLoader'" finished with return code 0. Output:
CORRECT
INFO 2005-05-29 16:01:47
CJSlibModule::writeInfo_impl()
Directory C:/WINDOWS is not a valid JDK directory: the java executable is missing.
INFO 2005-05-29 16:01:47
CJSlibModule::writeInfo_impl()
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2005-05-29 16:01:48
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_08/bin/java.exe '-version'" finished with return code 0. Output:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
INFO 2005-05-29 16:01:50
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_08/bin/java.exe '-version'" finished with return code 0. Output:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
INFO 2005-05-29 16:01:50
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_08/bin/java.exe '-classpath' 'C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/ins-j2ee.jar;C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/sapxmltoolkit.jar' 'com.sap.ins.j2ee.TestClassLoader'" finished with return code 0. Output:
CORRECT
INFO 2005-05-29 16:01:50 [synxcpath.cpp:865]
CSyPath::createDirectory()
Creating directory C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck.
INFO[E] 2005-05-29 16:01:50 [syxxccuren.hpp:189]
CSyCurrentProcessEnvironmentImpl::getEnvironmentVariable(iastring)
Unable to get value for environment variable JAVA_HOME.
INFO 2005-05-29 16:01:50 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/jdkPolicyCheck.
INFO 2005-05-29 16:01:50 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST.
INFO 2005-05-29 16:01:50 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\local_policy.log.
INFO 2005-05-29 16:01:50
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_08/bin/jar.exe is written to the logfile local_policy.log.
INFO 2005-05-29 16:01:50
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_08/bin/jar.exe 'xvf' 'C:/j2sdk1.4.2_08/jre/lib/security/local_policy.jar':
INFO[E] 2005-05-29 16:01:50 [syxxccuren.hpp:189]
CSyCurrentProcessEnvironmentImpl::getEnvironmentVariable(iastring)
Unable to get value for environment variable JAVA_HOME.
INFO 2005-05-29 16:01:50 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/jdkPolicyCheck.
INFO 2005-05-29 16:01:50 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST.
INFO 2005-05-29 16:01:51 [synxcpath.cpp:834]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\US_export_policy.log.
INFO 2005-05-29 16:01:51
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_08/bin/jar.exe is written to the logfile US_export_policy.log.
INFO 2005-05-29 16:01:51
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_08/bin/jar.exe 'xvf' 'C:/j2sdk1.4.2_08/jre/lib/security/US_export_policy.jar':
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\default_local.policy.
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\default_US_export.policy.
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\exempt_local.policy.
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\META-INF\JCE_RSA.RSA.
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\META-INF\JCE_RSA.SF.
INFO 2005-05-29 16:01:51 [synxcfile.cpp:152]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\CENTRAL\ONE_HOST\jdkPolicyCheck\META-INF\MANIFEST.MF.
INFO 2005-05-29 16:01:51 [synxcdir.cpp:144]
CSyDirectoryImpl::remove()
Removing directory C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/jdkPolicyCheck/META-INF.
INFO 2005-05-29 16:01:51 [synxcdir.cpp:144]
CSyDirectoryImpl::remove()
Removing directory C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/jdkPolicyCheck.
INFO[E] 2005-05-29 16:01:58 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="j2eadm" does not exist.
INFO[E] 2005-05-29 16:02:05 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:02:09 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:02:14 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO[E] 2005-05-29 16:02:26 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:02:37 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:02:42 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO[E] 2005-05-29 16:02:42 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:02:42 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:02:47 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:02:51 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:02:58 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO[E] 2005-05-29 16:03:03 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO[E] 2005-05-29 16:03:05 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2005-05-29 16:03:05
CJSlibModule::writeInfo_impl()
Looking for SAP system instances installed on this host...
INFO 2005-05-29 16:03:05
CJSlibModule::writeInfo_impl()
No installed instances found!
INFO[E] 2005-05-29 16:03:06 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
WARNING[E] 2005-05-29 16:03:06 [syxxcnamrs.cpp:128]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
INFO[E] 2005-05-29 16:03:08 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
WARNING[E] 2005-05-29 16:03:08 [syxxcnamrs.cpp:337]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByPort(const unsigned int portNumber, const iastring& protocol) const
Error converting from port number=3601/protocol=tcp to service names. SAPRETURN=12
WARNING[E] 2005-05-29 16:03:09 [syxxcnamrs.cpp:128]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
INFO[E] 2005-05-29 16:03:09 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:03:11 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:03:41 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:03:45 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2005-05-29 16:03:46
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_08/bin/java.exe '-version'" finished with return code 0. Output:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
INFO 2005-05-29 16:03:46
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_08/bin/java.exe '-classpath' 'C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/ins-j2ee.jar;C:/DOCUME1/KISHOR1/LOCALS1/Temp/sapinst_exe.3360.1117396809/JAR/sapxmltoolkit.jar' 'com.sap.ins.j2ee.TestClassLoader'" finished with return code 0. Output:
CORRECT
INFO[E] 2005-05-29 16:03:47 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2005-05-29 16:03:51 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:03:56 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\j2eadm" does not exist.
INFO[E] 2005-05-29 16:04:03 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO[E] 2005-05-29 16:04:07 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="DB6D1T61\SAPServiceJ2E" does not exist.
INFO 2005-05-29 16:04:10
CJSlibModule::writeInfo_impl()
Looking for SAP system instances installed on this host...
INFO 2005-05-29 16:04:11
CJSlibModule::writeInfo_impl()
Found these instances:
sid: J2E, number: 01, name: SCS01, host: DB6D1T61
INFO[E] 2005-05-29 16:04:13 [synxcfsmgt.cpp:132]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
ERROR 2005-05-29 16:04:42 [iaxxinscbk.cpp:289]
abortInstallation
MDB-070021 Registry information for database software found in system but the software check failed. The software was not properly removed or installed incorrectly.
WARNING 2005-05-29 16:04:42 [iaxxccntrl.cpp:477]
CController::stepExecuted()
The step Validate_Sapdb_System with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|J2EE_Engine_SAPDB_Client|ind|ind|ind|ind|ind|0|SAPDB_DB_SOFTWARE|ind|ind|ind|ind|ind|0|Validate_Sapdb_System was executed with status ERROR.
SAPinst component stack:
========================
Preinstall|ind|ind|ind|ind|ind|0
Current script:
===============
sapdb_validate_system();
WARNING 2005-05-29 16:04:45 [iaxxcsihlp.hpp:250]
main()
An error occurred during the installation.
Exit status of child: 1Have you found a fix for your problem? I am having the same with a JAVA install on ORACLE:
WARNING[E] 2005-11-02 18:46:34 [syxxcnamrs.cpp:128]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsQP2/protocol=tcp to port number. SAPRETURN=12 -
List of Issues/ problems in SAP GRC AC 5.3 Implementation
Hello,
Can anyone provide me with the list of most commonly occurring problems related to
1- SAP GRC Suite Installation
2- RAR Module implementation
3- CUP Module implementation
4- ERM Module implementation
5- SPM Module implementation
6- SAP PC 2.5 implementation
7- SAP RT Module implementation
8- SAP GRC Suite Upgradation.
Thanks in advance!!!Hi Abdul,
As such there are no issues in implemeting the AC modules.
Just make sure that you undeploy previously installed SP before deploying the new Support packages.
1. You have to upload the initial file (xml files) again in CUP and ERM. These files should be corresponding to latest support pack.
2. upload the CC 53_Messages.txt file in RAR with every upgrade.
Also restart the server after deploying any following the above steps.
For RT you can follow the note 1225960, 1060673 and make sure to restart the server after configuring the SAP Adapter.
Regards,
shweta
Maybe you are looking for
-
How do I link to a HelpID or a Search Term without any programming, through a URL?
I have looked through the documentation, and it seems that every "possibility" to call either a search term or a HelpID/CHSID for my documentation is to use some sort of API. Is there a way to call the search function and CHSIDs directly by only typi
-
I cannot make a desktop shortcut of my yahoo email without it opening in INTERNET EXPLORER. The connection is much better in Mozilla and I want to use this. i HAVE REMOVED ALL OBVIOUS SHORTCUTS FROM IE. i DON'T KNOW WHAT ELSE TO DO. Please Help?
-
Real Nokia 5610 doesn't play Video in QVGA at 30fp...
Hi all, I really disappoint that my Nokia 5610 doesn't play any resolution of video at 30fps, even i've tried whatever bitrate, whatever resolution (QVGA, QCIF, ...), whatever audio bitrate, it still can't play back smoothly with 30fps, onlt 15fps it
-
How do I stop yahoo mail window?
Everytime I open Mozilla Firefox I get an extra window opening up that says "Yahoo Mail" and offering me the chance to say my user name and password.I dont want to do that and I got sick of having to keep on closing it everytime I started up,which is
-
Hallo, I have a problem with a property in the xml forms builder. The property should show the parent folder of the xml file. So I developed a property renderer. In the details page the property is displayed correctly. But when in the RenderListItem,