Problem in Exporting report content to spreadsheet.

Hi,
When exporting report output to spreadsheet, the currency and quantity values are not getting exported properly.
For example : in report MB51 after getting the output, from menu-> list->export->spreadsheet->all available formats->Microsoft excel (in existing XXL Format)->table.
This is happening in Office 2007 only. And when i try to export the data to local file->spreadsheet, this problem is not there.
Do i need to do any settings in MS office excel or SAP GUI.
Plz suggest.
Thanks
Pradeep

Hi Vinod,
I have gone thru the notes mentioned by you, but did not work for me.
: symbol is being displayed, for ex: 1090:96
As i have already mentioned that i am not getting the error when i export the data to local file->spreadsheet.
Thanks
pradeep

Similar Messages

Problem in exporting report in CSV format

Hi All,
I am using Crystal Reports. Following are details about it:
CR Developer
Product 8.5.0.217
*_Problem that I am facing:__*_
I can create report in .rpt format, it is working fine here. But while trying to export this report in CSV format, it gives report that doesn't contain any information.
Is it because I am missing something or it is a known issue?
Thanks and Regards,
Anand

Hi,
I too am facing the same problem.
The report was made in 8.5. I have exported the report & opened it in Crystal report 12.
I can export to PDF, RTF, DOC & Tab separated Test.
However when I export this report in .csv (legacy mode) I just get the header & when I export it in .csv (Standard) I get a blanck .csv file.
I have checked 'Isolate Report/Page sections' and 'Isolate Group sections'. Still no data in the report.
refreshed it too.
I contains sub reports, but not in the page header & footer (I think) & it does not seem to have cross tabs & OLAP grids.
Any help is appreciated.
Links to Screenshots:
Main Report:
http://picasaweb.google.com/lh/photo/yM9sBexKt5jW9soqaMmHjw?feat=directlink
One of the Sub-Report:
http://picasaweb.google.com/lh/photo/0ofa5sABakvZ-nFZp-JSMw?feat=directlink

Problem while exporting report

Hi
I have created report with 7 subreport with crosstab in some subreports.When i run report its giving me more than 2000 records within minute But when i am going to export report into XLS or PDF or MS Word ,
its giving me timeout in crystal report but if we pass some optional parameters then its getting exported properly(with 50 to 60 records).
Please suggest on above.Thanks In Advance
Regards
Vishal

Vishal if you ask my honest opinion I hate the idea of using sub reports. I use maximum of 2 sub reports, and not more. Infact when it comes to use sub reports, I try to arrange things in database instead of arranging them onto the reporting side.
For example, I will check all the sub report codes and see if I can use those tables in my main report. The ones which can be used I will use them and ones which can't be used I will create temp commands (tables) under the Crystal Database.
If that solution doesn't work then I would ask my db admin to arrange something so that I can arrange the report.
Think this way, the main people who uses these reports are managers,directors. Do you think they have enough time to sit and wait for the report to come? Max they can wait is 5mins from my experience, over that and they start doubting your abilities.
Unless or otherwise, these reports needs to run overnight, try avoiding subreports and use alternative methods.
Regards
Jehanzeb

Problem after exporting report to MS Excel

Hello everyone,
I'm exporting a report (SSRS report) to MS Excel, the problem is though the report gets exported fine but the area outside the report i.e. everything outside the columns and rows of the report remains blank there are no gridlines. But my requirement is to
show the gridlines when the exported file is opened so that the user will not have to do anything extra for having the gridlines visible again.
Please help me with this issue, I am using C# for developing the application.....
Thanks in advance...

Hi Aakash Kelkar,
According to your description, the report works fine when you export it to excel, but the gridlines outside the report are missing. You want to keep the gridlines visible when the exported file is opened.
According to my test, we can’t achieve your goal directly use report designer. As a workaround, when open the exported file in excel, click View in toolbar, then check gridlines check box, the gridlines will be displayed. If the workaround doesn’t
meet your requirements, i recommend you that submit the requirement at
https://connect.microsoft.com/SQLServer/ . If the requirement mentioned by customers for many times, the product team may consider to add this feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase
the level of service provided.
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Export report Excel-Data Only works not,'not enough memory for operation'

Hi all,
we are using in our Software CrystalReport Version 11 Service Pack 5. Crystal report is intergated for .NET. We can not uninstall CrystalReport Version 11 Service Pack 5 to install another Version or another Service Pack.
We are haveing problems to export report as Excel 97-2000 Data Only, "not enough memory for operation" message pop up after you try to export report as Excel data Only.
Export Report as PDF is working fine.
This problems are on Windows XP Sp3 and Vista. On Windows 7 we have no problem.
Please, can somebody help me solving this problem, or to finde a workaround for Windows XP. Memory from PC is not the problem.
Mit freundlichen Grüßen / Kind regards
Odisej Nujiq

Odisej, unfortunately, processes such as remote sessions are reserved for phone cases only. You can create a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Also, just as an FYI, see the blog [What are these 'support' forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow]
Without phone support, you are left to do most of the foot work your self. On the forums, we can provide suggestions and guidance, but that is about it.
Couple of things to note though. If you do create a phone case, one of the 1st things that you will be asked is to update your app to SP6 - unless you can prove the same issue exists with SP6 (see more bellow).
Something I would recommend you try is to take an XP box, install SP6 on it, then install your app on it. If this works, your options are highly limited. E.g.; SP6...
One other utility that may be worthwhile to use is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Run that on the XP box. In the logs, look for "Access Denied" error messages. Look for load or other issues with crxf_xls.dll, exportmodeller.dll and crtslv.dll.
From your responses I am still not sure if you actually did run Modules and compared the results. This is much, much easier to do than working with ProcMon and I'd start there. To summarize, my troubleshooting plan (irrespective of the limits imposed on you) would be:
1) Use Modules as this is the easiest thing you can do
2) Try this with SP6 - more work that (1) above, but at least you are on the latest. If this works, banging your head into an SP5 wall will do you no good (like I said, irrespective of what ever limits...)
3) Use ProcMon - not too difficult, but time consuming as you will be looking over 100s, possibly 1000s of lines and not being familiar with details of CR, this will take time.
- Ludek

Problem in exporting ALV Report to excel sheet

Hi All,
I have developed a Report and now facing problem in exporting the same to excel sheet.
When we click the "Locate File" icon in the report layout, the system will pop up a window with radio buttons. I have opted for 'Spreadsheet'.
When i save the excel sheet into my desktop, the excel file has all the report headers (Title of each column). But no value is exported.
There are around 15 columns in the report and the excel sheet shows value of last 2 columns which has some text.
I have been into ALV report development and developed around 30+ reports in the same fashion.
What might be the reason behind this issue?
When i export other reports into excel sheet, everything is perfect without any flaws......
Kindly help me out......
Regards
Pavan

Hi,
Here's my suggestion: Install OpenOffice.org and ask SAP to deliver good integration with OpenOffice.org.
Alternative suggestion: re-install SAP Gui on the PC where the integration is not working. If that does not help, re-install Microsoft Office as well.
Here's my comment: I think you should ask this question in a different forum, e.g. in the Duet forum. That may not be the correct forum either, but as it is a Microsoft/SAP integration technology forum, someone there may know the solution.
Regards,
Raj.

End users not able to export a report to a spreadsheet

Hi Gurus,
My end users not able to export a report to a spreadsheet..
version     : ECC 6.0
Release    : 7.10
support Package 14
Currently the end user has 6 choices for creating spreadsheets if the selecte the "All Available Formats" option when generating a spreadsheet. Those options are:
Excel (in MHTML format)
Excel (in MHTML format for 2000/97)
Excel (in Office 2003 XML format)
SAP internal XML format
SAP Standard (internal table)
Excel (in Existing XXL format)
When they are trying to use format " Excel (in Existing XXL format) " Below error is coming..
save XXl list object in SAP Office
Name for list object            ALVXXL01
Title for SAPoffice              -
as per sap Note 1080608 it's support only * Excel (in previous XXL format) format,
My question is * Excel (in Existing XXL format) and * Excel (in previous XXL format) are same.
If yes why its not allowing to Excel (in Existing XXL format)... ? Am waiting for you valuable suggestions..
Best Regards,
RK

Dear, all
When they are trying to use format " Excel (in Existing XXL format) " Below error is coming..
save XXl list object in SAP Office
Name for list object ALVXXL01
Title for SAPoffice
Please sujest how to solw this problem
Mayur Tandel

Problem in exporting ALV output to a spreadsheet.

Hi All,
We have an existing Aging report in our project where in the output in ALV there is a row for Header data fields and a row below for Item data fields.Now the user wants that when he export the report to a spreadsheet the headings of Header and Item data should come in a single line without changing the layout in the report.
The report is calculating some totals which he wants to get in the same way as it is now.
Please guide me on how to go about this.
Thanks in Advance,
Saket.

Hi Saket Tiwari,
Your existing program must be storing all the values in an internal table and then displaying it in ALV format.
Try adding the following code to your existing code.
data : lv_filename type string,
         lv_filepath type string,
         lv_fullpath type string.
Add the following code to select the path where the user wants to save the excel sheet
the following method will take the path where the excel sheet is to be saved & the name of the excel sheet.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
WINDOW_TITLE         = 'Select The Path Where Error File Should Be Saved'
DEFAULT_FILE_NAME    = 'ExcelSheetName.xls'
CHANGING
FILENAME             = lv_filename
PATH                 = lv_filepath
FULLPATH             = lv_fullpath
EXCEPTIONS
CNTL_ERROR           = 1
ERROR_NO_GUI         = 2
NOT_SUPPORTED_BY_GUI = 3
OTHERS               = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The following function module will take the path as its input and save the contents of internal table in the form of excel sheet at the required place.
call function 'GUI_DOWNLOAD'
EXPORTING
filename = lv_fullpath
filetype                = 'ASC'
append                  = 'X'
write_field_separator   = 'X'
TABLES
data_tab                = itab_name
EXCEPTIONS
file_write_error        = 1
no_batch                = 2
gui_refuse_filetransfer = 3
invalid_type            = 4
no_authority            = 5
unknown_error           = 6
header_not_allowed      = 7
separator_not_allowed   = 8
filesize_not_allowed    = 9
header_too_long         = 10
dp_error_create         = 11
dp_error_send           = 12
dp_error_write          = 13
unknown_dp_error        = 14
access_denied           = 15
dp_out_of_memory        = 16
disk_full               = 17
dp_timeout              = 18
file_not_found          = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
itab_name is the name of internal table where the content is saved.
hope this piece of code helps you...add it in ur existing code after collecting all the data in an internal table.
Regards,
Radhika
Edited by: RadhikaS on May 29, 2009 9:23 PM

Problem to export a report (to PDF) after converting my reports to CR13

I have an old project with reports developped using Crystal Reports for Visual Studio 2003 (.NET 1.1). I want to convert them so I can now use Crystal Reports for Visual Studio 2010 (with .NET 3.5).
I installed Crystal Reports for VS2010 and I converted my reports to the new format. Unfortunately, one of my reports is not working anymore.
My ASP.NET application generate the report and export it as a PDF. I use CrystalDecisions.CrystalReports.Engine.ReportDocument.Export().
Everytime I run this method, an exception is thrown...
System.Exception was unhandled by user code
Message=System.Runtime.InteropServices.COMException (0x80041004):
Mémoire insuffisante pour l'opération.
   à CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   à CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   à CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   à CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   à CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   à CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   à
Source=GSPRapport
StackTrace:
I also tried to export the report (using PDF format) at design time with the "Export Report" button in Preview mode. It didn't work. But, I can export the report at design time using another format type (like XML).
The old version of te report (using .NET 1.1, CR9) work fine. As I said, other reports in that same project work perfectly.
Is someone have an idea of what's wrong!
Thanks!
Max.

The most common cause of this problem is having very large detailed images, or lots and lots of images in your report. The Crystal Report engine changed a lot from 9.1 to 13. The big change was from 9.1 to 10 though when we started using the RAS InProc engine.
The Crystal reporting engine is not efficient at handling the images and it can cause memory issues like you are seeing. As a test, try suppressing the images that show up frequently in your report and retry your export. If it works you'll have your answer and you'll need a new creative way to design your report without so many images.

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem after run report with spreadsheet

hi evry one
ther an a problem after run report with spreadsheet .
after runing iexplorar open and close fast no thing else
when i check the job from appserver job success with spreadsheet dis format.
what shall i do.
thanks.

Hello,
Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
If yes , take a look to : "IE7 windows opened and closed immediatly"
http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the solution suggested :
We have found the setting that we needed, under the Internet Options
Security tab, if you select the internet zone, and click the custom level
button, then scroll down to the Downloads section, the first option is
Automatic prompting for file downloads, setting this to enable keeps IE 7
from interfering with this sort of download.
Regards
Example with screen shots :
http://www.celt.iastate.edu/webct/securitysettings.html
Regards

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problem with Exporting crystal report to Excel

Hi !
I am new to crystal world. I have an application which has csp code. From the csp code (internal website) we invoke crystal using viewer.cwr to view or export reports. Last week we upgraded from Crystal 10 to Crystal Reports XI Release 2. Due to this upgrade we did some modification to the Viewer.cwr url ( Changed to Viewer.asp too). Now the View option is working fine but when the report is exported to an Excel the columns are squeezed up.
Here is the code for the viewer.asp :
ExcelWindow = window.open("http://servername/crystalreportviewers115/viewrpt.asp?id=" + id + "&apstoken=" + escape(token) + <%Response.Write("'"&sReportLogin&"'")%>'&promptex-REPORTDATE='pRptDate'&promptex-State='pState'&promptex-usertype='pUserType'&promptex-startreport='pStartpSelect'&cmd=export&export_fmt=U2FXLS:3&',"ExcelWindow", windowprops);
Is there any way to solve this formatting issue ? I tried changing the export format option as "export_fmt=U2FXLS:4" but this pulled up the data with the report header and sub heading in one row. Please help.
Nandita

Hi Kedalene,
Please check below links.
Microsoft Visual C++ Runtime Library:
VC++ runtime error
C++ Runtime Error when installing addons | SCN
Hope this help
Regards::::
Atul Chakraborty

Problem in Exporting report content to spreadsheet.

Similar Messages

Maybe you are looking for