Problem in f.05 - very urgent

Dear expert,
My client has problem in running f.05. In the pas two months ago (Sept, Oct-2007), journal in FS10N not created and my client doing manual posting,but in November 2007, posting works well, means that journal created succesfully. The problem is, journal in November created the wrong amount (it seems that posting manual not read by system).
Please somebody advice me for this issue :
- How to solve this problem and corrected the wrong amount in journal?
- If problem solving can do it only from doing manual posting; what's the effect in year end closing then?
Thank you in advance.

It seems there are some configuration problems in the system. In your case better to go for manual posting.
You can do two different manual postings:
1. You can reverse the worng posting posted by the system at the time of F.05 execution then post manual posting of actual value calculated manually.
2. Post the differenct ammount between the wrong posting value and actual value to posted.
In both the case i dont see any problems in year end if you follow other functions as usual.
padma

Similar Messages

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problem with tiles ..VERY URGENT!

I have a problem using tiles.
I have a search page called search.jsp. It calls a searchResults.jsp page when user enters searchcriteria and clicks the search button. I want to have the results on the same page in the bottom part.
I tried using Struts tiles but I have to make it understand that my results should appear on the same page at the bottom.I could not figure it out.
Please help me out.Its very urgent.
Thanks

Sounds VERY URGENT to me....

Problems with sun stdio very urgent

Hi ,
i am very new to sun stdio creator 2.0 .i installed sun stdio
and i created new project and in created one jsp page.
and i clicked on java tab corresponding to that page
this rave package is not identifing by my creator
/* these classes are not idenfied by creator 2.0*/
import com.sun.rave.web.ui.appbase.AbstractPageBean;
import com.sun.rave.web.ui.component.Body;
import com.sun.rave.web.ui.component.Form;
import com.sun.rave.web.ui.component.Head;
import com.sun.rave.web.ui.component.Html;
import com.sun.rave.web.ui.component.Link;
import com.sun.rave.web.ui.component.Page;
.</p>
public class Page1 extends AbstractPageBean {
so in design tab
i am getting an error
source file error
Page1.java:1: Java class must be a direct subclass of one of the following com.sun.jsfcl.app.AbstractPageBean, com.sun.rave.web.ui.appbase.AbstractPageBean, com.sun.rave.web.ui.appbase.AbstractFragmentBean.
please help me
how to set classpath for creator for accessing this rave package
how to resolve this problem
and how can deploy my webapp directly in tomcat
with regards
shannu sarma

Hi Shannu,
this forum is dedicated to C++ programming using Sun Studio compilers. Your question will most likely be answered in the forum about Java programming using Sun Java Studio Creator:
http://forum.sun.com/jive/forum.jspa?forumID=123
Boris

Posting problem in F.05- very urgent

Dear Expert,
When doing transaction in F.05, posting doing in SAPF100 as batch input sesiion name, and the message: "posting succssesfully created". But the problem is in the FS10N, the journal did not created. Please somebody admice me for this issue since its needs for closing.
Thank you in advance.

Did you also process the batch input? SM35?
If you selected the reverse posting and only checked the balance in FS10N at this moment there will be no difference. Another possibility is that you made the reversal postings in the same period...
Regards,
Johan

Problem in System object - Very urgent - Pls help

Hi ,
I have installed Portal version SP9 on windows with MS SQL server as database . I am experencing some
issues during the system object creation for R3 . Below I will specify all the configuration I have done for
system object creation ,
1. I have selected the option Dedicated application server for R/3 system .
2. Under th eproperty category , I have selected Connector and put the following values .
Application Host - 128.1.7.2
Remote Host Type - Select -3
SAP Client - 120
SAP System ID (SID)- DV1
SAP System Number - 00
System Type - SAP_R3
Trace Mode - Select -01
3 . Then Under the property category , Web Application server ( WAS ) I have selected
the following properties .
WAS hostname - 128.1.7.2
Was Protocol - http
4 . Next step I have selected the User Management and put the below details
Logon Method - UIDPW
usermapping type - admin ,user
4. I have also created an alias and made it default
6. Then I have gone to usermapping under the user administration and created the
user mapping for the user .
But when I have tested the system object , I am getting the following error .
SAP Web AS Connection - Jan 1, 1970 8:17:25 AM
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (128.1.7.2)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
ITS Connection - Jan 1, 1970 8:17:25 AM
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.ITS.path; wap.ITS.protocol; wap.ITS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are not valid: wap.ITS.path () ; wap.ITS.protocol () ; wap.ITS.hostname ()
I really dont know what is foing wrong . Do I need to omit the WAS details which I have mentioned in the step number 3 . What is the
real use of this step ? Could any body guide me as this is quite urgent
Thanks
Aneez

Hi,
We have similar setup and having same userids in both R/3 (webas 6.40 based) as well as
in EP 6.0, so we are not doing any user mapping as recommended. I hope i gave all necessary
parameters under system object of categories user management with SAPLOGON, connector
properties and also WAS properties with hostname and type as http. When i try to do test
connection it is giving following error message:
SAP Web AS Connection -
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (xxxxxxxx)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are
correctly defined.
Test Connection with Connector - Jan 1, 1970 6:40:19 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection successful
Also when i try to do the testing of transaction from :
System Adm.>Support.>SAP Application>SAP transaction>
Select the system and Tcode and most important SAP GUI type = SAP GUI for Windows
i am getting connection broken error.
Let me know is there anything in specific which is missing.
Thanks

Constraint Problem in Foreign key --- Very Urgent - Help Needed

Hello All,
There are 2 tables and their associated fields
EmpProj
Emp_id(pk)
Proj_id (pk)
eff_from_dt(pk)
ProjDesc
Proj_id(fk)
eff_from_dt(fk)
Proj_name
I have created the 2 tables like shown below
CREATE TABLE EMPPROJ
(EMP_ID NUMBER,
PROJ_ID NUMBER,
eff_from_dte date,
PRIMARY KEY(EMP_ID,PROJ_ID,EFF_FROM_DT)
CREATE TABLE PROJDESC
(PROJ_ID NUMBER,
PROJ_NAME VRACHAR2(20),
EFF_FROM_DT DATE,
CONSTRAINT S2 FOREIGN KEY(PROJ_ID,EFF_FROM_DT) REFERENCES EMPPROJ(PROJ_ID,EFF_FROM_DT));
Now whenever i try to create a foriegn key table it gives an error message like "No matching parent key found."
The columns in the foreign key should be same in number, same datatype and size. you can't create a foreign key with one column for a primary key of two columns.
What i need to do to refer only the two columns in the Primary Key by a Foreign key?
Please suggest anyway to resolve this problem.
Thanks in advance.
Captain

My question is
The foreign key can not refer only partial column of primary key as the rule of RDMS.
How should i achieve that by other alternatives?
Please suggest any method.
Thanks in advance.

Oc4j and tomcat problem ....very urgent..pl respond

Hi.Avi and all
here we r working with oc4j as ejb container and tomcat as webcontainer.as of now we r in oc4j as both webserver and appsrver.in this case my application is running successfully.but just week days we have decide to use tomcat as webserver and 0c4j as appserver.this is my client requirement.when we r working with thses two iam keeping my web files in tomcat and iamtrying to acess ejb's deployed on oc4j.in this scenarion iam struggling with ejb handle of stateful session bean.
here is the exact prob iam facing:
We have got the EJBHandle for EjboBJECT. We have placed the Handle in session and while retrieving EJBObject from it the container is throwing OrionRemoteException.
-----THIS IS STACK TRACE OF MY ERROR----$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$ BEFORE ezc.client.EzcPurchaseUtilManager$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
FW >>>>> In the prepareParams.....[Session handle EzUserHome: 1]
09/05/2002 - 22:12:15 :: ******************** session test in the utilmanager ***********
09/05/2002 - 22:12:15 :: EzSession: ezc.session.EzSession@2942da handle is: [Session handle EzUserHome: 1]
****************** Exception com.evermind.server.rmi.OrionRemoteException: The EJBHome could not be found at location 'EzUserHome'class com.evermind.server.rmi.OrionRemoteException
Exception com.evermind.server.rmi.OrionRemoteException: The EJBHome could not be found at location 'EzUserHome'class com.evermind.server.rmi.OrionRemoteException
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$ BEFORE ezc.client.EzcPurchaseUtilManager$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
FW >>>>> In the prepareParams.....[Session handle EzUserHome: 1]
09/05/2002 - 22:12:15 :: ******************** session test in the utilmanager ***********
09/05/2002 - 22:12:15 :: EzSession: ezc.session.EzSession@2942da handle is: [Session handle EzUserHome: 1]
****************** Exception com.evermind.server.rmi.OrionRemoteException: The EJBHome could not be found at location 'EzUserHome'class com.evermind.server.rmi.OrionRemoteException
Exception com.evermind.server.rmi.OrionRemoteException: The EJBHome could not be found at location 'EzUserHome'class com.evermind.server.rmi.OrionRemoteException
Can anyone write to me on this.
thx..
Vasu

Hi,
I tried this on OC4J 9.0.3 production ( http://otn.oracle.com ) and Tomcat 4.0.1 (Catalina). I have a SF session bean deployed on OC4J, a web app deployed on tomcat. web.xml has ejb references added.
The code in first JSP is like this..
java.util.Properties prop = System.getProperties();
prop.put(Context.INITIAL_CONTEXT_FACTORY,
"com.evermind.server.rmi.RMIInitialContextFactory");
prop.put(Context.PROVIDER_URL, "ormi://localhost:23891/current-workspace-app");
prop.put(Context.SECURITY_PRINCIPAL, "admin");
prop.put(Context.SECURITY_CREDENTIALS, "welcome");
Context ctx = new InitialContext(prop);
HealthCareServiceHome h = HealthCareServiceHome)PortableRemoteObject.narrow(ctx.lookup("HealthCareService"),HealthCareServiceHome.class);;
HealthCareService js = h.create();
Handle eh = js.getHandle();
session.setAttribute("Eh",eh);
and in a second JSP, I access this stateful session bean like this...
Handle eh= (Handle)session.getAttribute("Eh");
HealthCareService s = (HealthCareService)eh.getEJBObject();
// do something on this instance. Everything works fine
I dont know what versions of tomcat/oc4j you are using, may be an upgrade will help?
Thanks,
Neelesh
OTN Team @ IDC

Problem with the EP6 SP10 Patch 1 Post Install (VERY URGENT)

Hello,
My installation seems to be well done.
But when I try to do the first connection on the portal, I sign-in the system and it returns errors like :
"Portal Runtime error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage
Component Name : com.sap.portal.pagebuilder.pageBuilder
The exception was logged. Inform your system administrator..
Exception id: 04:29_01/02/05_0003_7226250
See the details for the exception ID in the log file"
Is there one of you who can help me to solve my problem.
It is very urgent
Thanks in advance
Regards
Humbert

Hello,
The console logs contain no information bout my problem but I looked in the directory :
e:\usr\sap\DP1\DVEBMGS00\work and here is the contain of the file std_server0.out
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_63] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_53] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_50] Fatal:
Feb 2, 2005 11:03:30 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_30] Fatal:
stdout/stderr redirect
node name   : server0
pid         : 1820
system name : DP1
system nr. : 00
started at : Wed Feb 02 11:03:37 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 88028.313 is starting...
Loading: LogManager ... 609 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 15 ms.
Loading: ClusterManager ... 250 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 1031 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (78 ms).
Service cross started. (125 ms).
Service file started. (125 ms).
Service timeout started. (125 ms).
Service memory started. (156 ms).
Service jmx_notification started. (203 ms).
Service trex.service started. (266 ms).
Service userstore started. (31 ms).
Service tcsecvsi~service started. (297 ms).
Service p4 started. (343 ms).
Service classpath_resolver started. (16 ms).
Service tcsecwssec~service started. (390 ms).
Service deploy started. (2656 ms).
Service apptracing started. (172 ms).
Service log_configurator started. (8031 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (297 ms).
Service failover started. (62 ms).
Service ts started. (109 ms).
Service appclient started. (140 ms).
Service javamail started. (156 ms).
Service licensing started. (16 ms).
Service jmsconnector started. (172 ms).
Service connector started. (234 ms).
Service configuration started. (16 ms).
Service webservices started. (578 ms).
Service dbpool started. (5343 ms).
Service com.sap.security.core.ume.service started. (2547 ms).
Service security started. (2203 ms).
Service classload started. (109 ms).
Service applocking started. (156 ms).
Service shell started. (344 ms).
Service tceCATTPingservice started. (47 ms).
Service telnet started. (78 ms).
Service keystore started. (516 ms).
Service ssl started. (16 ms).
Service webdynpro started. (172 ms).
Service tcsecsecurestorage~service started. (109 ms).
Service ejb started. (781 ms).
Service servlet_jsp started. (813 ms).
Service dsr started. (343 ms).
Service tcsecdestinations~service started. (141 ms).
Service rfcengine started. (109 ms).
Service jmx started. (829 ms).
Service pmi started. (203 ms).
Service prtbridge started. (688 ms).
Service basicadmin started. (703 ms).
Service adminadapter started. (93 ms).
Service sld started. (1234 ms).
Service monitor started. (672 ms).
Service com.sap.portal.prt.sapj2ee started. (109 ms).
Excluding compile: iaik.security.md.SHA::a
Service jms_provider started. (2954 ms).
service DQE ================= ERROR =================
Service tc.monitoring.logviewer started. (4266 ms).
ServiceManager started for 26532 ms.
Framework started for 28844 ms.
SAP J2EE Engine Version 6.40   PatchLevel 88028.313 is running!
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Regards
Humbert

Very urgent: call servlet from JSP

Hello,
I'm facing a problem in invoking a servlet from a JSP having the JSF components.
The application has a text field to implement ajax for search functionality in the database .I have written a servlet to make the database connection and fire the querry.
Ajax implementation in a js file is called on every keyup event in the jsp file,and
a call is given to the servlet from the ajax methode.
The function in the js file is as follows:-
function getPersonByFirstNameXML( firstName ) {
    if (!firstName) {
        clearPersonByFirstNameXML();
    } else {
        var url = BASE_URL + "/servlet/get_PersonsXML";
        alert(url);
        return new AJAXRequest("post", url, "firstName=" + encode(firstName), processGetPersonByFirstNameXML);
}Im getting the myAJAX.status value as 500.
I think I'm not able to access the servlet properly.
what changes do i need to make in the we.xml file ?
and what should be the url to be passed.
Please provide me a sloution to the above problem as it is very urgent else if anybody is aware of a readymade JSF componet with search functionality freely available please let me know.
PS:
The sample application named RedirectionExample which makes use of a servlet and would be of help to you. You can find the tutorial on the following page:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
is not available as stated in some of the suggestions by Author: mayagiri
Thanks for any help.
Abhi

the status 500 generally means either HTTP server internal error or that execution of CGI script or servlet aborted with error.
It can be reasonably supposed that the request reaches the servlet, ie. that "url" value points to some existing servlet, otherwise most probably the status value would be 404.
To test that the servlet is working i'd try to access it using some simple html page with form like this (with {BASE_URL} replaced by real value):
<form method=post action={BASE_URL}/servlet/get_PersonsXML>
<input type=text name=firstName>
<input type=Submit>
</form>

Very urgent(Queues blocked in R/3)

I have checked in sm50,smq1 and r3am1.There are no queues that have been blocked in CRM.
But when i checked in R/3 ,I found in SmQ1 that 3000 queues have blocked .So there no flow of data from r/3 to crm.
So please help me how to resolve this problem.
This is very urgent.
regards,
Mdahv.

Hi
Possible error situation: A business object has been changed in a CRM Server Application, but the
change (delta load) is not received in SAP R/3.
In case of errors or missing data updates in the target system, you may perform the following steps:
Check Display BDoc Messages including the middleware trace information
Check the outbound queue
Check the table BDOC_TRACK in SAP R/3 (shows information on the data handling of the SAP R/3
application)
Check the outbound queue of SAP R/3
Check the inbound queue of the CRM System
Furthermore, verify the RFC destination and the logical system assigned to your site (in the Admin
Console) and the CRM Middleware parameter settings in the CRM System and SAP R/3 (for example,
CRMRFCPAR).
Cheers
Message was edited by: Natarajan

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Very Urgent Tab Problem

Hi to All...
I Designed the PDF forms using Adobe Acrobat Live Cycle Designer 7.0.
but i am facing tab problem.
for example: if i entered in the some text boxes then if i want to go back to previous text boxex means curser will go to the some other text boxes.
and also if open in internet Explorer tab issue is more.
is there any property we need to set?
please guide me its very urgent.
thanks in Advance...
chalmal Seetaram

To set the Tab order choose: 'Tab Order' under 'View' menu and read through the Tips.... it is easy.
Good Luck,
SekharN

Problem on loading applet netscape4.73 in macos9 very urgent pls help me

Hello,
Problems on loading applet in Netscape4.73(jre1.1.5) AppleMac OS-9.
when i try to load applet of size ~ 200kb in Netscape 4.73 AppleMac os9, then browser abruptly closing with the AppleMac os error message :- the Applicarion " Netscape Communicator " has unexpectedly quit because an error of type 2 occured. And then asking for system restart.
Since i am new to the AppleMac environment i cant adjust the settings please help me to overcome the problem. Its Very urgent and i am in great hurry pls.
thanks in advance.
Rao. V.N.

Hi Rao,
I'm not a mac-os specialist (even I had some business with mac !!), and it is very difficult speaking in blind, but I have severals questions that may help you.
- Did you try you applet in other AppleMac plateform ?
- Does your applet work fine in other browser/plateform ?
- Does a small applet work fine on this plateform with this browser ?
- Does you applet contains instructions like System.exit, System.* or try to access (read or write) to local files ?
Otherelse it is possible you have problem with your jre config, try to configure your plugin with command like : -Xmx64m -Xms16m
(These commands tell the plugin to use at least 16 Mo memory and 64 Mo for the maximum see : http://java.sun.com/docs/hotspot/gc/)
Hope that will help you

SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.

Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"

Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name                                      Null?    Type
LASTWRITTEN                                        DATE
CREATEDON                                          DATE
LASTUPDATEDON                                      DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN         CREATEDON           LASTUPDATEDON
15.02.2007 15:10:20
                    15.02.2007 15:10:20
                                        15.02.2007 15:10:20Best regards
Maxim

Problem in f.05 - very urgent

Similar Messages

Maybe you are looking for