Problem in intalling hp mediasmart mvp and paint it

Hi
I have a hp touchsmart tm2t 1000
and it's dvd recovery number 4 is not working.
I tried to install drivers but the mediasmart mvpand corel paint it didn't come up
also I changed the windows and I downloaded them again but it didnot work!
So I need you help me,please?
Thank you

Hi,
1. Please write your notebook product number (p/n).
Resource:
How to Locate the Notebook product number (p/n)
2. Which system are you using on this model?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

Coloring issues with magic wand tool and paint bucket tool, leaves uncolored areas near drawn lines

Photoshop CS6 doesn't color properly. Whetever I use brush tool or elliptical marquee tool to do the lines (with brush tool I use Hard Round, not soft), it doesn't color the whole area when i fill them with color. This happens with both magic wand tool AND paint bucket tool, there is always a small uncolored area near the lines. I have tolerance on 30, and anti-alias, contiguous and sample all layers boxes checked. (this setting worked on my old CS3) I have tried tolerance from 0 to 100, no difference. I have also tried unchecking the boxes I just mentioned, still no difference. I hope there is a solution for this, because it is tedious to always go to the Select - Modify - Expand every time I need to color some area. So how do I fix this problem? I use seperate layers for lines and colors, like I have always done with other Photoshop versions. Even in school where they have CS5 those normal settings work.

Hello Chris,
I don't think this is a "user error". I think Adobe should be able to program a state of the art paint bucket, which is capable to get this done right.
Other applications are able to get this done right.
Please don't fall into a programmer's ignorance ("this is done right by definition") but listen to us artists and improve this unintuitive behavior. Add something like "ignore transparent pixels", because this doesn't even work if you draw on an empty layer.
Thank you!

Paintbrush and paint bucket use wrong color in PE6 for Mac

Hi. I am trying to use either the paintbrush or paint bucket tool to add a solid color in a layer. I choose a foreground color and apply the tool and instead of using the color I've chosen, it uses an old color I used several photos ago. (I chose the old color with the eyedropper tool in case that matters). No matter what I do, it seems that this old color is stuck in both the paintbrush and paint bucket. I've tried choosing a different color with the eyedropper, and although that color appears as the foreground color, the old "bad" color still applies when I use either the paintbrush or bucket tool. I have reset the tools (no luck), rebooted photoshop (no luck), tried switching back to the default (B&W) colors (still no luck). Does anyone have any suggestion what I can try? I'm new to the forum and have tried searching for this issue, but can't find it. I apologize if this is an old issue. Thank you for your help.

Hi, thank you for this suggestion. I will try it, and it also sounds useful for lots of quirky things. In the meantime, I tried something else that solved my problem. I reset the eyedropper tool and picked another color with it and it cleared it out. I had reset all the tools, but somehow it didn't work until I did this. Thank you for your help.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

Problem loading content from iTunes library and Netflix

Everytime I try watching a TV episode, movie, or Netflix show, I get an error sign with loading the content. It's not restricted to Netflix and also includeds recently purchased and saved items through iTunes library. What can I do to resolve this problem?

Try restarting AppleTV (menu and down on remote together for 6 secs) and your router.

Problem with Left Click (mighty mouse) and flash content

Hi, first sorry for my bad english...
Well I have an issue with the left click (i have mighty mouse) and flash content in Firefox:
if i'm using Firefox and then change to any other app, when i get back to firefox i have no left click anymore...
So i have to open the mouse setting panel and everything works fine again...
I don't want to open the mouse panel over and over again to fix that, so what i can do?
THANKS in advance =)
I uploaded a video to show the issue:
http://www.youtube.com/watch?v=ROWSod5fUjk
Mighty mouse Settings:
Left Click + Right Click
Firefox ver: 3.5.5
Snow Leopard: 10.6.2
iMac 24" (iMac9,1)
Message was edited by: MaLk Gopher

Hi, Guys!!
And you have some right cosmic_hippo , Why?
Well think that the real problem it's something between Firefox and Flash content...
because if i use Safari and i try make what i describe in the first post, i don't have any problem with the mouse settings.
Only Happens when i use Firefox...
Cheers.
Well the issue is still there...

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

As soon as I open iTunes a message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

As soon as I open iTunes a message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

Boot from your OS installer disk and run Repair Disk from Disk Utility.

Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

Hello,
we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
- Thanks in advance for a tip !
Best Regards,
Ralf

Hello Ameya and hello Shao,
we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
Thank you for your helping.
Best Regards,
Ralf

Problem in intalling hp mediasmart mvp and paint it

Similar Messages

Maybe you are looking for