Problem in Issues/message table problem in RMMAIN
Hello ,
I have a problem in Issues/messages table in tx RMMAIN
Problem:When i click on create "Issue" tab in RMMAIN,issue tab is disabled.
Please let me know what i have to do?
Regards,
Neni
Hi,
Is this problem with a roadmap assigned with a project or a roadmap not yet assigned with a project?
If this roadmap is assigned with a project, then:
1. Go to tcode: SOLAR_PROJECT_ADMIN->select the project to which this roadmap is assigned.
2. Go to tab->Project Standards->Select the tab "TABS".
3. Check the visibility of the tab "Issues/Messages". It should be "Visible".
If still the problem persists, then check whether you have this SAP_RMMAIN_EXE authorization.
Check also that you have activated BC sets for service desk.
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_TPI_ACT_AST_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_TEXTTYPES_001
Let me know if this not solved your issue.
Regards,
Sanjai
Similar Messages
-
BDC return message table problem
Dear All
We are doing BDCs for Excise Invoice (J1IS) and for Posting Excise
Invoice (J1IV) in Backgroung mode.
Here we are facing problem in BDC return message table (messtab) which
retruns the internal document number,errors or warning messages
in BDC rerurn message table.when we are doing BDC for J1IS in background
mode, no internal document number or error messages is generated in
BDC message table (ie in messtab), but the excise invoice is posted and database table
j_1iexchdr is updated with internal document number even though Accessible
value is '0'.Then we are taking this internal document nuber from databae
table j_1iexchdr passing to next BDC for J1Iv.Again after execution of BDC for J1IV
in background mode the same is happening as J1IS BDC return message table.
Is it the correct method of data retrieving from Database table ?
and we want to capture all types of error messages and internal document
no generated by BDC message table.How to capture BDC return messages.
Does Transactions J1Is and J1IV are executable for BDC ?
Thanks and Regards,
UlhasHi
Use the following code to capture the return table values.
data: i_msg type standard table of bdcmsgcoll with header line.
LOOP AT I_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = I_MSG-MSGID
LANG = SY-LANGU
NO = I_MSG-MSGNR
V1 = I_MSG-MSGV1
V2 = I_MSG-MSGV2
V3 = I_MSG-MSGV3
V4 = I_MSG-MSGV4
IMPORTING
MSG = W_STR
* EXCEPTIONS
* NOT_FOUND = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ i_msg-msgnr,w_str.
endloop.
Regards,
Vishwa. -
Smart form problem with multiple pages & table problem
Hi experts,
I have a problem with my smart form with multiple pages
Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
Regards,
PJI would suggest another approach to this problem.
Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
The table should flow as you would be using the Main window for this one.
As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
Hope this resolves your problem.
Regards,
Ancy
Edited by: abapfreak on Oct 4, 2010 11:52 AM -
I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
My iPhone 4S lost simcard reference several times a day and issue message invalid SimCard. I have already replaced simcard three times and not solve the problem. It's necessary to power off and power on to solve it. Could someone help me?
Return your phone to Apple for evaluation
-
Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?
That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise. -
DM 4.5, software issues message "Cannot find system in table file"
Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Problem while dropping a table
Dear All,
I am facing a problem while dropping a table in Oracle 10g.
I am able to find the number of records in the table but unble to delete it.
SQL> select count(*) from merchant_audit;
COUNT(*)
30028278
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
I have to drop this table from the database. Please help.
regards,
SanthoshHi,
IS it a table ? Is it your table ?
Read this example :
sqlplus scott/*****
SQL> create table merchant_audit(col1 number);
Table created.
SQL> create public synonym merchant_audit for merchant_audit;
Synonym created.
SQL> grant select on merchant_audit to merchant;
Grant succeeded.
SQL> conn merchant/merchant
Connected.
SQL> select count(*) from merchant_audit;
COUNT(*)
0
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
See owner into the dba_tables, and if synonym into dba_synonyms.
Nicolas.
Message was edited by:
Nicolas Gasparotto -
Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown
HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanksHi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
"Problem with iCloud" message keeps coming up
I have a MacBook Pro and use Safari and ever since I upgraded to Yosemite (and maybe that's just a coincidence--I have no idea), I keep getting a message that pops up saying that iCloud cannot connect to *********@gmail.com. It gives me a link to System Preferences and suggests that I click there to fix the issue. The problem is that when I click there, it asks me for the Apple ID password for ********@cstone.net (which is an account that I have, but NOT one that should be associated with my iCloud account). I enter every password I can think of and then it tells me if I forgot my password to click here. So I do and I enter that email address to have it send me a link to reset my password and it says it sent but nothing ever arrives. Elsewhere I am able to log in with my gmail account and the password that I know and cstone.net is not listed among my email addresses on my account. So where is this coming from and how can I get this annoying message to stop popping up on my screen? Thanks!
I finally called Apple Support and my problem was fixed in under 10 minutes. It seems as if I changed the email address associated with my iCloud account a while back. I had forgotten I did this--it was so long ago. And although I did it properly, I never "signed out" of my old one. Don't ask me why this was never an issue until I upgraded to Yosemite. That's when I started getting the messages that would pop up multiple times a day.
So to fix it, I went to the apple icon and then to System Preferences. I clicked the iCloud icon and along the left side of the next screen it showed me that I was still logged in to my old email account (the one that was no longer supposed to be associated with my iCloud account). So I had to click "Sign Out" and then say yes--delete to the next question or two. (The tech on the phone explained that nothing was being deleted from my computer except my connection with that old email address that I don't use anymore.) Then I logged in with what I thought was my current account all along and the problem has been solved! I hope this makes sense and can help someone else because this issue drove me nuts for months! -
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
Problem with Nokia Messaging on my N97 (V22)
Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it. -
Problem in accessing mseg table using MSEG~M Index.
Hi Experts,
I am facing problem in accessing mseg table using MSEG~M Index. I used same sequence of fields and i tried with mandt field also. but it is not taking the Index and it is going for TImeout ABAP dump.
This are my codes used in different ways
1. SELECT mjahr
bwart
matnr
lifnr
dmbtr
kostl
aufnr
bukrs
FROM mseg CLIENT SPECIFIED INTO TABLE t_mseg2
WHERE mandt EQ sy-mandt AND
matnr NE SPACE AND
werks EQ p_werks AND
lgort NE '0000' AND
bwart IN (122,201,262) AND
sobkz NE '0'
%_HINTS ORACLE 'INDEX("MSEG" "MSEG~M")'.
2. SELECT mjahr
bwart
matnr
lifnr
dmbtr
kostl
aufnr
bukrs
FROM mseg INTO TABLE t_mseg2
WHERE matnr NE SPACE AND
werks EQ p_werks AND
lgort NE '0000' AND
bwart IN (122,201,262) AND
sobkz NE '0'
%_HINTS ORACLE 'INDEX("MSEG" "MSEG~M")'.
3. SELECT mjahr
bwart
matnr
lifnr
dmbtr
kostl
aufnr
bukrs
FROM mseg INTO TABLE t_mseg2
WHERE matnr NE SPACE AND
werks EQ p_werks AND
lgort NE '0000' AND
bwart IN (122,201,262) AND
sobkz NE '0'.
The above all code is not at all taking the index in Quality server .but in Development it is taking .In Quality server it is reading all datas without using the index and going Timeout ABAP dmup
Please, Suggest me some solutions.
Thanks in Advance.
Regards,
NandhaHi,
Without NE also not working out. i am facing same problem still.
SELECT bwart
matnr
lifnr
dmbtr
kostl
aufnr
FROM mseg CLIENT SPECIFIED INTO TABLE t_mseg
WHERE mandt EQ sy-mandt AND
werks EQ p_werks AND
bwart IN (122,201,262) AND
mjahr EQ p_year AND
bukrs EQ p_cc
%_HINTS ORACLE 'INDEX("MSEG" "MSEG~M")'.
Please,check and help me out from this issue.
Regards,
Nandha -
RFC Message: Internal Problem, in REDWOOD CPS.
We have Redwood CPS 7 connected up to SAP IS-U Supply.
We keep getting random RFC errors when executing a script.
Any Idea
ERROR LOG *******************
ABAP_RUN: R/3 call BAPI_XBP_JOB_OPEN failed
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
TCTRETURNS/ : deleted
/ERROR LOG *******************Hi,
if this is a random issue I assume that the authorizations of the CPS communication user are OK, otherwise please verify:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/bb35b8623a489aa63abd9f5ebf2448/frameset.htm
If this random issue happens only if you execute your custom script, I would assume that the script wants to create a job with invalid data. For example: some data is missing or wrong like start date/time, job class, job user, job name.
Let's analyze what you have posted here:
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
-> XM034 point to the XMI log
-> use transcation RZ15 to analyze the XMI log
-> XM034 means "problem detected" (see appendix 8 of document ftp://ftp.sap.com/pub/icc/bc-xbp/BCXBPDOC70V3.pdf)
I locked into the code and indeed it seems that function BAPI_XBP_JOB_OPEN returns this message if the job cannot be created.
So if Sys- and XMI-Log cannot help you in solving this issue, I would create a message for dev. support.
Cheers,
Martin
http://service.sap.com/jsm -
Problem in creating Queue Table of 'VARCHAR2' Payload.
Hello guys!!
I am having a problem creating a Queue Table of payload type 'VARCHAR2'. I want to create a queue for simple varchar2
type of messages. I am using following command:
dbms_aqadm.create_queue_table(queue_table => 'sh_varchar_queue_table',
queue_payload_type => 'VARCHAR2');
I am getting the following error:
ORA-24000: invalid value VARCHAR2, QUEUE_PAYLOAD_TYPE should be of the form
[SCHEMA.]NAME
Please help!!!
Thanks!!!
ShaluThanks Brajesh!!
Actually I have tried with Object Type n that is working fine. But i didn't know that 'VARCHAR2' can't be a payload type. It
is mentioned in Rel 8.1.5 that it can be a 'VARCHAR2' n I started trying that. didn't know that it's not possible in 9i.
Anyways, thanx so much!!!
N Brajesh, few days back on the discussion forum itself, I mentioned my e-mailed to you. I wanted to get in touch with u
bcoz i need ur help for so many other problems. I have tight deadlines n i am new to all this stuff.
Once again, can u pls e-mail me at [email protected] Shall look forward to ur e-mail.
Thanks so much!!
Shalu
Maybe you are looking for
-
Works, just one problem, make disk images non read only
I have a script that enables me to drop a file onto it and will ask for a text. It will copy the file and the text inside a new disk image. However the created is read only, i would prefer it if i could edit it's contents. The code is given below: gl
-
UWL task takes up to 2 minutes to appear
Hi there, We have a situation where the UWL task takes between 1 minute and 2 minuts to appear in the user's inbox. in our analysis we have found that the task is created immediatly in the business process but it set with an inactive status. After a
-
Can my 2006 iMac running OSX 10.4.11 be upgraded to move my stuff to the cloud? stuff to the cloud?
Can my 2006 iMac running OS X 10.4.11 be upgraded to move my stuff to the cloud?
-
Hi experts, i need your help, how can I see directly the accountancy view from MM03?, thanks ....
-
Purge Preferences and P_PRESERVE_CASE to true
Hello, Environment: - Application Express 3.2 - Oracle Database 10g Express Edition In my login process (wwv_flow_custom_auth_std.login) on page 101 I use the parameter P_PRESERVE_CASE => TRUE because I use also P_UNAME => lower(:P101_USERNAM