Problem in loading data from one DSO to onother DSO in BI7

Hi
Iam loading data from one DSO to onother, After executing DTP Iam getting error message as "Aggregation NOP not allowed on DB (key figure 0DSCT_DAYS1) ", Here 0DSCT_DAYS1 is the keyfigure aggragation type is "NOP" , exception aggregation is " No aggregation(X if more than one value unique to 0 occurs)"
Please kindly give me solution .
Radha Krishna

We had this issue in our project. It mainly arises when you have written start routine in transformation. At start routine level it can not aggregate the fields for which NOP is set & that's why it throws an error.
Please check the load by removing the start routine. If it works then introduce a data target in between which has exactly same structure as previous data target except the fields with NOP aggregation.

Similar Messages

Problem in loading data from one DSO to another

Hi All,
I am using Multicube 0PM_MP03, this mutli cube use DSO 0PM_DS02 & 0PM_DS01, data will flow from PSA to 0PM_DS01 & then to 0PM_DS02 using a Update rule, i have triggered my infopackage & i can see data in 0PM_DS01 & i have activated the data in 0PM_DS01, now on right click on 0PM_DS01 i click on the option Additional Functions -> Update 3.x Data to Target, now the request status is green in 0PM_DS02 but i cannot see any data in this DSO, neither in new or active, can anyone help me out in this where i am doing wrong.
Thanks,
Pritam.

Hi Pritam,
This is strange, Check the below points.
1. If the number of records added 0, in manage of DSO2?
2. Confirm if there is a transfprmation between ODS1 & ODS2. If there is, you need to use a DTP (not Additional Functions -> Update 3.x Data to Target).
3. Activate the request and then check.
4. Maintain PSA for the datasource 80PM_DS01 and when loading data from DSO1 to DSO2 choose option PSA and then into targets.
Regards,
Panksj.

How to edit data while loading data from W/O to Standard DSO?

Hello,
I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
Thanks and regards,
Himanshu.

HI,
Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
Cheers
Vikram

Load data from one Application to another in BPC NW 7.5

Hi
I have a requirement to load data from One application to another application.
eg. HR Plannning to CostCenter Planning.
I am aware of a method to load data using transformation file mapping source and target dimensions and run DM package and this works fine.
However, the challenge is if i try to automate this process then i will have to hardcode the application tech name and save as variant to use that in process chain. Now, if i hardcode the tech name of the application then it might happen that during full optimization the tech name might change and the automation load will fail.
so how to handle this situation? any standard practices available?
appreciate your inputs/thoughts.
Regards.

Hi,
Exactly. The main problem is that there is no statement to transfer the data. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f4/33f0bbc46c4a53860f1410f20ffb8b/content.htm
Since the structure of both the applications is same, you dont require add_dim or rename_dim, etc. However, you definitely need the when statement.
If you want to transfer all the records, then you can have something like
*WHEN ACCOUNT
*IS *
*REC(EXPRESSION = %VALUE%)
*ENDWHEN
Hope this helps.

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

How load data from One Infoobject to Another Infoobject?

Hi GuRUS
Any body has succeded in loading data from One Infoobject to Another Infoobject?
Pls Let me kNow
Regards
Durai

Hi Durai,
Create export datasource on the info-object and then load the data to the other info-object.
Check this link also:
Re: How load data from Infoobject to another Infoobject?
Bye
Dinesh

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Problem in Loading data from R/3 to ODS

Whn i load data from r3 - tables ,I could not get the data to the data target ODS.
What is the problem ? can any one help this out .

Hi Lakshmanan,
Important point : It is always good to detail your issue to get a prompt response.
There could be lot of issues.
1. Find the datasource which is feeding this ODS and
Goto R/3 system -> RSA3 and check whether any records are populated, If no records are populated then there is issue with extracting the records..
2. if records are populating in the first step..on the BW Side, check the PSA table..and if you find any records in PSA then this is issue on BW Side..and there could be many issues..
May be if you can provide more information..we will of help to you...
Regards, Vj

Problem in loading data from flat file to info object

Hi experts,
I am new on bw. I am trying to load data from .csv file to info object. CSV file contains two colums Mat No, Mat Name and are separated by comma and similarly Mat Name is attribute of Mat No in info object. I am doing all steps by following the book but whenever I load data into info object it is loaded in one column. I mean both Mat no and Mat name apears in Mat No column whereas Mat Name column appears empty in info object. I have changed exel file into .csv. Any one can help me sort it out.
regards

Hi,
your flatfile should be in the form of csv ie it does not mean that in a word u seperate it with coma
create an excel file and say save as in teh file name give the name of your flatfile and in the save as type select CSV(comma delimited) from the drop down list
and then in this file enter the data as u fill in excel sheet.
After closing the file right click it and say open with wordpad then the data should appear seperated with a comma.
Try this and then revert back in case of any doubts.........
Are u loading data into BI 7.0 or 3.x
Regards
Madhavi

How to load data from one Infocube to another request by request using DTP

Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
Ravi

You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set.

Loading data from one table to another table

I need to load the data (data conversion) from one table to 3 different table.
I have to load the data from Source table to following 3 target tables.
So Consumer table has email pk and it has relationship with CONSUMER_RCV table and CONSUMER_RCV
table has relationship with CONSUMER_ATTR table. I am doing right now with pl/sql but I am looking
to use MULTI INSERT or SQL*LOADER or another efficient way.
I tried with MultiInsert but it getting failed as it's violating Unique Constraints as source table might contains
Duplicate emails.
Could you please show me how I can load the data efficiently?
Also I need to load in CONSUMER_ATTR table from CONTACT table which has ATTR1, ATTR2 columns.
so My mapping will be ...
Contact.email, first_name, last_name will go into Consumer table
then in CONSUMER_RCV, I generate the id column value by sequence, load email and DATE_CREATEd from contact table
And rest of the value is hard coded
Then in CONSUMER_ATTR table I will generate the CONSUMER_ATTR_id through sequence, for ID, will use the same
id column value which I have generated by sequence in CONSUMER_RCV, then put the attr_type = 'ATTR1' and for
attr_value column I will insert the value from contact table's ATTR1 value,
Then generate another CONSUMER_ATTR_ID, will use the same id column value which I have generated by sequence
in CONSUMER_RCV, then put the attr_type = 'ATTR2' and for
attr_value column I will insert the value from contact table's ATTR2 value,
Please let me know if you need further explanation.
I am using Oracle 9i R2.
Please consider CONTACT is Source table, CONSUMER is a Target1, CONSUMER_RCV is a Target2 and CONSUMER_ATTR is a Target3
to simplify the problem.
Following is the Table structure
=========================
CREATE TABLE CONTACT (
ID VARCHAR2 (40) NOT NULL, -- will go into Target1
EMAIL VARCHAR2 (100) ,      -- might be duplicate and will go into Target1 and Target2
FIRST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
LAST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
COUNTRY VARCHAR2 (40) NOT NULL, -- will go into Target1
PHONE VARCHAR2 (100), -- will go into Target1
NOTIFY VARCHAR2 (3), -- will go into Target2 table's RECEIVE_EMAIL column
CREATE_DATE DATE ,               -- will go into Target1 and target2
ATTR1 VARCHAR2 (400),           -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100),          -- will go into Target3 as attr_type= ATTR2 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100),          -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
CONSTRAINT CONTACT_PK
PRIMARY KEY ( USER_ID ) ) ;
CREATE TABLE CONSUMER(
EMAIL VARCHAR2 (100) NOT NULL, -- PK
TITLE VARCHAR2 (40),
FIRST_NAME VARCHAR2 (40),
LAST_NAME VARCHAR2 (40),
ADDRESS1 VARCHAR2 (40),
ADDRESS2 VARCHAR2 (40),
CITY VARCHAR2 (30),
STATE          VARCHAR2 (30),
ZIP          VARCHAR2 (10),
COUNTRY VARCHAR2 (40),
PHONE VARCHAR2 (15),
DATE_CREATED DATE NOT NULL,
CONSTRAINT CONSUMER_PK
PRIMARY KEY ( EMAIL ) ) ;
CREATE TABLE CONSUMER_RCV (
ID                VARCHAR2 (40) NOT NULL,-- PK
EMAIL VARCHAR2 (100) NOT NULL,-- FK reference to Consumer
SITE VARCHAR2 (100) NOT NULL, -- default website
RECEIVE_EMAIL VARCHAR2 (1),
CREATE_DATE DATE NOT NULL,
CONSTRAINT CONSUMER_RCV_PK
PRIMARY KEY (ID) ) ;
ALTER TABLE CONSUMER_RCV ADD CONSTRAINT CONSUMER_RCV_FK
FOREIGN KEY (EMAIL)
REFERENCES CONSUMER (EMAIL) ;
CREATE TABLE CONSUMER_ATTR (
CONSUMER_ATTR_ID           VARCHAR2 (40) NOT NULL, -- PK
ID                     VARCHAR2 (40) NOT NULL, -- FK reference to COnsumer_RCV
ATTR_TYPE           VARCHAR2 (100) NOT NULL,
ATTR_VALUE           VARCHAR2 (4000) NOT NULL,
CONSTRAINT CONSUMER_ATTR_PK
PRIMARY KEY ( CONSUMER_ATTR_ID ) ) ;
ALTER TABLE CONSUMER_ATTR ADD CONSTRAINT CONSUMER_ATTR_FK
FOREIGN KEY (CONSUMER_ATTR_ID)
REFERENCES CONSUMER_RCV (ID) ;

HI Hema,
How are the entries related.. is it like for one entry in y table there are more than one entry in x table then you have to use loop with in loop , here are the both the conditions.
1) For each entry in Y there are more than one entries in X
sort y by quota trpid.
sort x by quota trpid.
loop at y.
loop at x where quota eq y-quota
                        and trpid eq y-trpid.
z-value = x-value.
append z.
endloop.
endloop.
2) For each y there is one entry in x table.
sort y by quota trpid.
sort x by quota trpid.
loop at y.
read table x with key quota = y-quota
                            trpid = y-trpid binary search.
if sy-subrc eq 0.
z-value = x-value.
append z.
Endif.
endloop.
Mahesh

Problem in passing data from one .jsp page to another .jsp page

i have a problem here
Actually i have 2 jsp pages. What im trying to do here is actually i want to pass data from the first jsp page to the second for updating
The first jsp page contains data that user wants to update in the form of table.
<td><img src = "edit.gif" alt = "edit" border="0" ><td>
<TD><%= Name %></td>
<TD><%= rs.getInt("Age") %></td>
<TD><%= rs.getString("Gender") %></td>
So this page displays the data that users wants to update plus one image button (edit button). So when user clicks this button, all the data in this page will be brought to the second .jsp page called updatePersonal for updating.
The problem here is that it is not displaying the existing data in the second .jsp page.
The second page basically contains forms
<INPUT TYPE="text" NAME="FirstName" maxlength="30" value = "<%=FirstName%>">
Can someone please help me. I really dont know what to do..How do i get the data displayed in the text field that is passed from the first .jsp page..thankx in advance

Please modify below code to:
td><img src = "edit.gif" alt = "edit" border="0" ><td>
-----------------modified code
td><a href="updatePersonal.jsp?FirstName=<%=rs.getString(FirstName")%">&LastName=<%=rs.getString("LastName")%>&Age=<%=rs.getInt("Age")%>&Gender=<%=rs.getString("Gender")%>"><img src = "edit.gif" alt = "edit" border="0" ></a><td>
I'm sure it works</a>

Problem in loading data from one DSO to onother DSO in BI7

Similar Messages

Maybe you are looking for