Problem in Print Program, picking JECS value but not maintained

Hi,
I have a report for Invoice Printing.
My query is related to Item conditions that in one item we have not maintained JECS condition of 3% but when we are printing the program, that is printing Education cess 3%.
This is done by the user mistake, because when we maintain JECS condition for 3%, the same output will be shown.
But in my case, user forgot to insert this condition. After that printout showing the Education cess 3%, but in VF03, respect to that line item conditions there is not maintained JECS condition.
Pls guide..how it is possible..
Regards..

comment these lines in ur program & see
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
control_parameters = w_ctrlop

Similar Messages

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple.

I think a firewall is interfering with my mail program - I can receive but not send. Please help!

I think Firefox may have installed a firewall that is interfering with my email program - I can receive but not send mail.
== This happened ==
Not sure how often
== Firefox updated with ALOT

Firefox does not install a firewall.

TS1717 What do I have to do to keep the iTUNES program on my computer BUT NOT RUNNING on Start UP? It requires too much CPU usage on my old computer.

What do I have to do to keep the iTUNES loaded as a program on my computer BUT NOT RUNNING on Start UP? Just opening when I want to use it.
It requires too much CPU usage on my old computer.

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I can print from my iPad 3 but not from my new iPad mini which has a lower spec. What should I do?

Question. Why can I print from my iPad 3 but not from my new iPad mini which has a lower spec?

The "lower specs" have nothing to do at all with why you cannot print. Are you connected to the same Wi-Fi network that the printer & the iPad 3 is on?

TS1389 Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer. This has already been done and I have tried the suggestions regarding authorisation. I can play the programs on my computer, but not the Apple TV.

Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer. This has already been done and I have tried the suggestions regarding authorisation. I can play the programs on my computer, but not the Apple TV.
Any ideas?

in remote app click on the
lower left corner on the text
top of the context menu click devices
choose the appletv rather then your shared lib in the list
if you are trying to view a movie that is located on your ipad on your tv using the appletv then
you should use airplay mirror not the remote app

I have a problem in the program .. Why does not work ? :(

I have a problem in the program .. Why does not work ?
It look like the pic, !!
Thanx alot,

You have opened the render engine, not the full program.
Mylenium

Problems with Print Program of Production Order (CO03) !!

Hi all,
I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu Functions >> Print). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification?
Thank you in advance.

Hi MURUGESAN THANGATHURAI ,
Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), it will not update this?
What's problem?
Thank you guys.

I can print to a Lexmark X4550, but not scan (with Image Capture)

Following tips (by "Lexmark Listens" and others) I succeded in printing (via USB and wifi) to a Lexmark X4550.
But when scanning (via USB) using the Image Capture app (included in Mac OS), Image Capture sees the scanner a couple of seconds, then complains that no scanner is connected (although it still is).
This happens with a MacBook (Pro), but not with another MacBook (white).
I tried (not necessarily in this order):
- reboot
- repair disk permissions
- re-installing drivers (both printer driver and "Image Capture Application Scan Driver for for 10.6.8 and later Mac OS") from Lexmark support site.
- running Mac OS software update (which updated the printer driver to version 2.8]
- resetting the printing system: http://support.apple.com/kb/HT1341
How can I completely remove all files related to Lexmark printers&scanners and try again installing from a clean state?
(I see in other posts that a Lexmark Uninstaller is sometimes located in HD/Library/Printers/Lexmark/YEAR/ ; I used to have one here, but it was removed during previous attempts at getting the scanner working ; and anyway when I run this Uninstaller at the time, it did not completely clean the /Printer/Lexmark)
My problem is very similar to this one described in this bug report in Lexmark knowledge base:
http://bit.ly/MOR9bd
But the patch proposed is "For Mac OS X 10.6 only" and titled "LexmarkPro800-Pro900SeriesQFE1.0.0.dmg" so I don't think it would work for a Lexmark X4550. (Indeed I installed this patch and the problem is still there).
As for the workaround suggested, "When using Apple's Image Capture application, do not use the "Show Details" option [...]", I can't get it to work: as soon as I launch Image Capture, it starts scanning (a preview) and the "Show Details" bouton is grayed out.
I've already spent many hours trying to get this printer-scanner to work with my Mac.
Any suggestion would be very helpful!

Same issue, sort of. After ML upgrade, Lexmark x264dn fails to register as a printer & scanner, there is no scan tab anymore. Also, image capture application is stuck in a crash loop until I disable mDNS (bonjour) on the printer. Still, it does not register as a scanner anywhere (protoshop, image capture, preview...)
I have installed all the package scripts from Lexmark's Mountain Lion support page. No dice.

USB printer recognized by A.Express but not by new A. Extreme (gigabit)

My Canon IP4300 was automatically recognized and worked without any problems with an old Airport Express. However, with my new AEBS (gigabit ports), the printer is no longer recognized, I don't see it in the printers tab (says none).
Surprisingly, when a Windows PC connects to the new AEBS with the printer connected to the AEBS USB port (but not recognized in the Airport Utility), the windows PC finds the printer and can connect to it. So physically, the connection can be made, thus it has to be a problem with the Airport utility?
Quite strange that AEBS printer 'plug and play' works better with Windows PC than with Apple computers. Other people experiencing the same problem?

Nevermind. The Epson R220 works fine on the AEBS. Wrong USB cable was plugged into the AEBS.

When I print business cards, they sometimes print 1/4 too high but not always.

I have my business cards in a Word document using an Avery template. I have used the same file for years. I never had a problem with my Canon printer but after buying an HP Photosmart D110 I have had nothing but problems. When I print then they print about 1/4 inch too high ruining the cardstock and wasting ink. This doesn't happen all the time. Sometimes I print and they are perfect but when I go back and print another, the problem returns. This is the same card stock I have used for years and when it is inserted in the printer it doesn't matter if it is a single page or a stack of them. I have tried previewing the page before printing and the alignment is correct. I've tried printing to a PDF and then printing the PDF, same problem. I try it on the Canon and no problem. Only reason I bought this in the first place was the cartridges were cheaper and I do a lot of color printing and scanning! I have just replaced the cartridges and did a head alignment so that is not the problem. I have tried it with regular paper and the problem persists. I'm ready to drop kick this thing and buy another Canon!
This question was solved.
View Solution.

Did you ever find a solution for this problem? I have no problem printing the business cards out on a Canon printer, or a different HP printer I used to have, but the D110 is nothing but a pain in the you know what ! I'm using publisher and the avery 8371 card stock, I searched solutions for days and did everything possible but still they're not printing correctly!! I'm dissapointed in this printer, every time I have a problem with something it always seems to be an HP product!!! Very frustrating because I never had to mess with any settings in the other printers I had, I would just put the file in, change the quality and click the print button with no problems. I'm ready to throw this printer out the window Anyway thanks in advance and I hope somebody can help me with this issue !!!

PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro

I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
All systems running Windows XP Pro, SP3
A8P 8.1.2
A9P 9.1.1
Any ideas?

Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
1) Click ADVANCED
2) Select PRINT AS IMAGE
3) Set DPI to 300
4) Click OK
5) Make any other typical print setup adjustments as you normally would and finish printing as usual

User Exit that will allow the SAP program to create DN, but not create IDO

Hi all,
The requirement is when we select 1 PO in VL10g transaction and click the u201CBackgroundu201D button, the user exit will allow the SAP program to create Delivery Number, but not create IDOC for the Delivery Number to send it to warehouse system. Also the created Delivery Number must be in changeable mode in ECC system .I need to find any exit to make the DN table field LIKP-VLSTK not to be u201CBu201D (distributed). The B will make DN not changeable in ECC system which is hard coded value in standard program. so the DN should be changeable.
Please suggest me the User Exit name which serves my purpose.
Thanks in advance
Latha.

Welcome to SCN!
Here is some code that will allow you to find exits and BADIS on your own:
[Code To Find BAdi|https://wiki.sdn.sap.com/wiki/display/ABAP/CodeToFind+BAdi]
Rob

Print crash when printing from Mail or TextEdit, but not InDesign

Hi,
I'm unable to print from any application other than InDesign. Up to now I've tried Mac applications - Mail,TextEdit and Safari - and a third party application DevonThink. All crash the minute I hit command P.
I suspect the trouble started when I installed a printer driver for a Canon IP90 bubble jet. I've now removed it from the print list, to no avail, but it might be lurking somewhere else. My usual printer is a Xerox Phaser 3450 PS.
Has anyone else experienced the same and does anyone know how to fix this?
Chris.

Yes, today with Mac's First Aid from the installer disk - no problems identified. Permissions are also repaired every time I back up (daily) with Super Duper.
I've had a response regarding other problems I'm having that it might be that as I have only 1.6 GB free capacity that this is maybe contributing to the problem. But why the difference between InDesign and Mac applications is a bit of a mystery.
Thanks for your response.
Chris.

Problem in Print Program, picking JECS value but not maintained

Similar Messages

Maybe you are looking for