Problem in Printing pdf file
I havve downloaded adobe reader 11.0.02. I van view pdf files but cant print it. please help.
What exactly means "cant"?
Similar Messages
-
Problem with printing pdf file
hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank youNo, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
Problem with printing pdf file created from Illustrator
Hello,
In a drawing I created with Illustrator 10.0.3 I covered part of a circle with a white rectangle (to make it disappear). I saved it as pdf. When printing the pdf (under Linux with a HP printer), the covered part reappeared. However the pdf-file is how it should be. Anybody knows what the problem is?No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
Problems opening & printing pdf files created on a Mac
I am at my wit's end! I recently upgraded to a new version of Acrobat and suddenly a lot of my clients could no longer open my pdf files. I uninstalled the latest version of Acrobat and reinstalled an older version (Acrobat 8.1.3). Some clients started being able to open my pdf files but others could not. So I started using the Acrobat Share server and sending links. Some of my clients cannot open those either and many cannot print even if they can open the files that way. I personally also cannot print from the Acrobat Share server. The pdf files print out with all the surrounding graphics and application design elements. I also can't open the pdf files that I created on my Mac using my PC laptop running Vista. I have tried opening and printing both pdf files and the Acrobat Share links from my Mac and my PC laptop running Vista, to no avail.
I was under the impression that compatibility problems between Macs and PCs were largely a thing of the past. I was also under the impression that the whole point of exchanging pdf files was that pdf files are cross-platform compatible. Not only am I am losing tons of valuable time, I may be losing credibility with my clients (especially since I have an IT background). I desperately need to know what version of Acrobat I should be running on my Mac so that when I scan documents into my Mac, the pdf files that are created are completely 100% compatible with both Mac and PC operating systems regardless of what operating system and what version of Acrobat my clients are running. I also need to be sure that those same pdf files I create on my Mac can be seemlessly printed out from either a Mac or PC regardless of the operating system or Acrobat Reader version. If anyone can help me get to the bottom of this, I will be eternally grateful. Thanks.This file downloaded and works fine for me in Preview on both OS X 10.5.7 and 10.4.11 (and opens in Acrobat Pro 9.1.1 and 8.1.5, and the latest version of Reader on both versions of the OS). As expected.
If you're printing from Acrobat.com by right clicking in the image area and selecting Print, don't. This isn't printing the PDF, it's printing the Flash frame that contains, as you've noticed, buttons and other elements. (Adobe's Mac Flash plugin is notoriously buggy.) Direct your clients to download the file by selecting the download button, not by right clicking and printing.
Again, your PDF file is fine. -
Problem with printing pdf file HP 845c windows 7
When I am printing a pdf file it is not printed well, the ink is grey and it is difficult to read.
No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
I have a problem to print PDF files with flash embedded.
I embedded some flash into a PDF file. When previewing the PDF file in Adobe reader 9, the flash looks fine. But when printing the PDF file, the size of the flash become smaller than I specified, and starting repeating in the specified area.
Am I missing something or is it a bug of Adobe reader 9?But do you have the current version of Adobe Reader, which is version 9.2?
You can check adobe.com for updates for your Adobe Reader for it to function to its full potential. -
Problem in printing PDF file from txn CV03N
While Printing a PDF file from transaction CV03N ..the file is opening but it is not printing and giving a information message
'Standard document interface is not available' . Please give some suggestions how to correct it..I had similar issue. Despite of having "Define workstation application in network" for PDF setup for Application Type 3 "print" with Application %AUTO% I was only getting the .pdf file displayed in Adobe Reader instead of getting it printed.
Solution:
set Application to "AcroRd32.exe /t" to get the files opened in the Adobe Reader, printed and closed. The only thing I wasn't able to do was to get the Adobe Reader application closed after the print.
regards,
Jacek -
Unable to print PDF files to HP Colour Laser Printer
Hi Guys,
I am having a problem with printing PDF files to a network printer. The printer was purchased recently and is a HP Colour LaserJet CP3525n all in one, printer/photocopier etc. Other documents such as Word documents work, so I don't think its a straight forward issue...
I can print PDF file to other printers, so I know the PDF files themselves are not at fault.
When I try and print to that printer, I just get pages and pages of funny characters coming up on the page... It doesn't matter what sort of PDF file I print either...
Are there any settings I can change that may help me resolve the issue. The printer is networked and shared amongst 4 people.
Any help would be appreciated.
AmbrishThis problem has been reported to occur with certain Lexmark and Dell printers. These printers include the following:
Lexmark Z700-P700
Lexmark X1180
Lexmark X1170
Lexmark X1150
Lexmark P706
Lexmark Z25
Dell A940 (Personal All-in-One)
Microsoft has several possible solutions here
http://support.microsoft.com/kb/918730 -
I am using Adobe Acrobat 9.5. Recently I am having problems with printing PDF files, while other formats are printing just fine. Upon printing a pdf doc, following appears on the print out:
PCL XL Error
Subsystem: KERNEL
Error: ExtraData
File Name: kerlib.c
Line Number: 9024
Please helpHi Dev.datta,
Try install the Adobe reader XI and also try update the printer drivers as well . That should take care of this problem. -
Intermittent Problem of Corruption when printing PDF files
From time to time I have a problem with text corruption when printing pdf files. Text comes out one character alphabetically later.
For example, a file I printed yesterday contained the text "ONE WEEK VISITOR LICENCE". On printing it again today (on the same computer and printer), it appeared as "POF!XFFL!WJTJUPS!MDFODF". But another attempt immediately afterwards was correct.Here is a scan of the correct and incorrect printouts
I have had this problem intermittently over a couple of years, particularly with pdf files embedded as a frame in a web page.
I am using Adobe Reader 10.1.0 (but the problem has also appeared on earlier versions), Windows XP SP3 with all updates and an HP Deskjet 6980 printer on a wireless link.
Any advice would be welcomeNot sure why this may be happening. But you can try printing the PDFs as an image, which should solve the problem. It may take a little longer to print but at least you will get a correct print.
You can do the same by Clicking on the Advanced button displayed on the Print dialog and checking the checkbox for "Print as Image".
Hope that this fixes the issue.
Ankit -
Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.
Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K -
Hp officejet 6310 ALl in one printer. WHen printing PDF files, the part or all of the first page prints out in english and the balance is random characters. What is going wrong.
The troubleshooting steps here may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Adobe Acrobat Pro failed to print pdf file
I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
I do not know other alternatives for solving this issue.
Your help will be very much appreciated.
Thank you!
ErikIt seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here. -
Orarrp can't print pdf file directly to printer
oracle remote print utility (orarrp) can't print pdf file directly to printer.
we expect orarrp utility can handle ".rrpa" file (i.e. pdf file generated on the application server) by directly print the file to the client's printer, i.e. invoke the acrobat reader on the client side, display the the printer selection dialogue, after confirmation print the pdf file, then the acrobat reader close automatically nicely.
However we are disappointed as the acrobat reader startup and display the pdf file content but does not print and does not close.
After testing the problem several times, there are some findings:-
Finding (A):-
(a) for the success of direct printing of pdf file, a physical path must be provided; we have tried 2 methods:
1) using drag & drop to copy the pdf file directly to the browser
2) open pdf file in the browser directly using browser menu-->File-->Open.
(b) for the failure of direct printing, a virtual path is involved and we have also tried 2 methods:
1) when web.show_document() is used
2) enter the url to the URL bar of the browser,
eg. http://appsvr.com:7777/report/test_printout/APPSVR1094707.rrpa (this is a virtual path/url)
Finding (B):-
(a)when the physical path is used, a temporary pdf file is generated in the same directory where the rrpa file exists in the application server,
e.g. in application server: d:/printout/yyy.pdf is generated for d:/printout/xxx.rrpa when direct print occurs
(b) however when the virtual path is used, there is no such temp "pdf" file generated and direct print failed.
May be when virtual path is used, orarrp utility don't know where to generate the temp "pdf" so direct print doesn't occur.
So, anyone has similar experience or further queries or has solutions, please join.
Thanks for your attention.Hi,
It is really late to give response this post. But still who ever refering to this post for the same issue this solution is useful for achieving same in background:
Even same can be used in smartforms, for getting spool request in PDF format as well which will decrease the size of file when printing in SAP printer.
ct_tline is PDF output:
DATA: lv_pdfsource TYPE xstring.
FIELD-SYMBOLS:<p> TYPE x. " <p> type any.
LOOP AT ct_tline INTO cs_tline.
ASSIGN cs_tline TO <p> CASTING TYPE x.
CONCATENATE lv_pdfsource <p> INTO lv_pdfsource IN BYTE MODE.
ENDLOOP.
* ->Create spool request in PDF format
CALL FUNCTION 'ADS_CREATE_PDF_SPOOLJOB'
EXPORTING
printer = 'LOCL' "Printer name supporting PDF device type
* DEST =
pages = 1
pdf_data = lv_pdfsource "XSTRING internal table
* NAME =
* SUFFIX1 =
* SUFFIX2 =
* COPIES =
* PRIO =
IMMEDIATE_PRINT = 'X'
* AUTO_DELETE =
* TITLELINE =
* RECEIVER =
* DIVISION =
* AUTHORITY =
* LIFETIME = '0'
* IMPORTING
* SPOOLID =
* EXCEPTIONS
* NO_DATA = 1
* NOT_PDF = 2
* WRONG_DEVTYPE = 3
* OPERATION_FAILED = 4
* CANNOT_WRITE_FILE = 5
* DEVICE_MISSING = 6
* NO_SUCH_DEVICE = 7
* OTHERS = 8
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF. -
How to directly print PDF file(which is stored in SAP) in ABAP report?
Hi experts,
I searched SDN for printing PDF file but everything is about OTF to PDF and to use fm: CONVERT_OTF which is not the solution for my problem.
I have to build ABAP report which will take the PDF file attached to SAP document (CV02N) and print it.So, which function module or program can I use to print the PDF file?
Thank you very much.
Kind regards,
DanijelaDear
this is the code for down load smartform for PDF format. its working properly
2nd way is
set your Acrobat Printer as your default printer
when you print select printer as LOCAL
then you will file dialog box for Naming PDF
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE.
DATA : WA_CTRLOP TYPE SSFCTRLOP.
DATA : WA_OUTOPT TYPE SSFCOMPOP.
DATA : T_OTFDATA TYPE SSFCRESCL.
DATA : T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : V_FILESIZE TYPE I.
DATA : W_BIN_SIZE TYPE I.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
CALL FUNCTION P_LV_FNAME
EXPORTING
OUTPUT_OPTIONS = WA_OUTOPT
USER_SETTINGS = 'X'
CONTROL_PARAMETERS = WA_CTRLOP
IMPORTING
JOB_OUTPUT_INFO = T_OTFDATA
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = W_BIN_SIZE
TABLES
OTF = T_OTF
LINES = T_PDF_TAB
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
DATA : LV_DOWN_FILE TYPE RLGRAP-FILENAME.
DATA : LV_TEXT TYPE STRING.
CASE SSCRFIELDS-UCOMM.
WHEN 'REPRUNMOLD'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Run_Moulds\' SY-DATUM '-' SY-TIMLO '-' 'Running Mould' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
WHEN 'REPLINESIT'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW '-' SO_LINE2-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Line_Situation\' SY-DATUM '-' SY-TIMLO '-' 'Line Situation' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
ENDCASE.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_BIN_SIZE
FILENAME = LV_DOWN_FILE
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = V_FILESIZE
TABLES
DATA_TAB = T_PDF_TAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE 'File not downloaded succesfully' TYPE 'I'.
EXIT.
ELSE.
MESSAGE 'PDF File downloaded succesfully' TYPE 'I'.
ENDIF.
ENDFORM. " Print_PDF
Rewards if useful.
Maybe you are looking for
-
BAPI or RFM for either HRP1007 Table or BAPI/RFM to see the vacant position
Hi all i need BAPI/RFM to display the list of vacant positions .I knoe HRP1007 Table. but my requirement is BAPI/ RFM. Plz help me Thanks in advance. Hema
-
Prevent from being blocked.
Hello everyone, When invoking a third party function (which I can not modify its behavior), my application will be blocked when something error occurs and the block dues to the thid party function, which will be blocked when something error occurs. I
-
I'm having a totally new problem with opening Photoshop in CS2. I use a G5 with Mac OS 10.4.11 w/ 324 gb avail. mem. Previous to the problem i got a kernel panic freeze, shut it down and proceeded with no other problem. I then got a notice to repair
-
i was woundering if you make a guitar pro 5 drum track for example and export it as a midi file, can you open it on gargae band and put a drum kit softwere instrument to it, and have it lay the beat that i wrote?
-
I backed my iPhone up on 08-23-2013. I lost my phone and I had to get another one. When I went retrieve my info it is was no longer there. Is there a way to retrieve?