Problem in product creation via IDOC CRMXIF_PRODUCT_SAVE

Hello,
For our Product migration, we are trying to use LSMW, by IDOC, using Message Type CRMXIF_PRODUCT_SAVE, and IDOC Type CRMXIF_PRODUCT_SAVE01. However, each IDOC fails with the same errors each time, which are:
- Data cannot be maintained for set type COMM_PR_SHTEXT
- Data cannot be maintained for set type COMM_PR_UNIT
- Assign a base category to the product
- Error status 'A' calling validation service
- Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE , BDoc type P
I searched alot and found no sure solution... the hierachy/category I created is specific, and I see no SAP standard hierachies/categories containing these set types COMM_PR_SHTEXT and COMM_PR_UNIT.
Furthermore, I dont see these set types in the list when I try to add them to my specific category. Are they truely standard SAP set types??
If so, how do I get around these IDOC errors and post successfully the IDOC/product creation??
Thanks,
Tim

Dear Tim,
Please check if the settypes COMM_PR_UNIT and COMM_PR_SHTEXT are
assigned to the mentioned category in transaction COMM_HIERARCHY.
Settype COMM_PR_SHTEXT contains the description of the product.
You want to maintain the UOM and this is stored in settype
COMM_PR_UNIT and the settype will also be recommended.
Additionally, please ensure that you have added a default category
in the customizing: Path: spro > EPB professionel > SRM Server >
Master Data > Content Management > Define Mapping for Product Categories
Hope this information is helpful. Please reward points!
Gerhard

Similar Messages

Sending Production orders via Idoc to external system

Hello,
I want to generate an Idoc for a production order when releasing or saving it. Is there an output control where I define the message link the purchase order?
Thanks!!

By IDoc-Tunneling i am thinking of just putting the IDoc through XI without transformation in XML (like in one blogs of Michal). Because of this blog there seems only to be one step in IR - import IDoc. in ID there are the mandatory steps.
But if i want the ext. Admin to tell what parameters i need to communicate with the ext. system i have doubts in telling him just the IP and perhaps a program which we have to start via RFC configured in XI.
regards

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

Steps for Sales order creation via IDOC

Hi,
I am getting a file on the application server ,which is a purchase order IDoc outbound from another SAP system. I need to use this file to create a sales order through an IDOC in my SAP system. What are the various settings and steps need to be undertaken to achieve this?
Regards
Nishant

Nishant,
This is NOT the way IDOCS are to be used. When you want to communicate between two SAP systems, you recieve a info from a middleware you use IDOCS.
Here if you want you can read the data and call the concerened BAPI, to create the Sales order.
regards,
Ravi
Note : Please mark the helpful answers

Creation of sales order via IDoc ORDERS05 - specify a reason of rejectio

Hi,
I want to create a sales order via IDoc (type:ORDERS05), i specify for an E1EDP01 segment a reason of rejection (ABGRU),
The sales order is created succefully by calling the FM IDOC_INPUT_ORDERS but the order quantity of the item where i have specified a reason of rejection is equals to 0.
Is this normal? i want that this will take 3 value either 0?
Could anyone help me?
Thx

Hi,
Thank you for ur answer.
I've followed the procedure that you have explained and the Quantity 3 have been succefully passed to VA01 but is set to zero when i execute the next OK-CODE (=UER2, i think it is llike Enter button ). I simulate the same procedure by creating a sales order on VA01 and i've finally found the problem : at item level, if i enter the Material (MATNR), the order Quantity (KWMENG) and the Reason of rejection (ABGRU), the quantity is set to zero after clicking the enter button ; but if i enter only The material and The quantity followed by enter button, and enter after the Reason of rejection, it works fine, the Quantity doesn't change.
What is the solution that you propose to me?
I've try this one on debugger mode:
The FM which interpret the Idoc create the sales order by CALLING TRANSACTION 'VA01' USING bdcdata....
I've modified the bdcdata to implement the sequence of the steps before (MATNR + QTY <ENTER> ABGRU <ENTER>).
1. Is it possible to code this modification?
2. Is there a way to structure the Idoc for having this sequence in bdcdata?
Thanks in advance!
Narivelo

Vendor Credit Memo creation in SAP via IDOC Interface (Inbound)

Hello Team,
I have a client requirement to create Vendor Invoices & Credit memo via Idoc Interface. Iam using INVOIC02 idoc type for posting Invoices and could able to create the invoice successfully. For credit memo , I'm aware that we can use the same idoc type (INVOIC02) and need to pass CRME value for the segment field BSART.
What i need is a sample Inbound INVOIC02 idoc file for credit memo to identify the required fields for successful credit memo creation.
Regards,
Vijay

Hello Team,
I have a client requirement to create Vendor Invoices & Credit memo via Idoc Interface. Iam using INVOIC02 idoc type for posting Invoices and could able to create the invoice successfully. For credit memo , I'm aware that we can use the same idoc type (INVOIC02) and need to pass CRME value for the segment field BSART.
What i need is a sample Inbound INVOIC02 idoc file for credit memo to identify the required fields for successful credit memo creation.
Regards,
Vijay

Delay in creation of idocs after business partner change

Hello all,
In our production CRM system, we had an issue where even though users were making changes/creation of business partners, there was no trigger for the creation of idocs to be sent to the middleware system (connected via ALE to the CRM system).
This happened for a period of 17 minutes and then suddenly idocs started generating for the changes and posted to the middleware system as normal.
There were no resource constraints in the system during that time. We also checked the ORACLE database alert file to see if there were any database issues and found nothing.
The main activity going on that time was the download of product/materials from our R/3 system.
We can confirm that bdocs were generated for the business partner change to be sent to R/3 and those were sent succesfully during these 17 minutes. So only the creation of idocs were impacted.
We are trying to determine root cause as to why for those 17 minutes, idocs were not getting created.
Any help is appreciated.
Thanks,
Ramesh

Hello Kiran,
Thanks for the reply. The issue really is why during those 17 minutes idocs were not generated for the business partner changes.
After those 17 minutes, idocs started generating fine (even for those business partner changes that happened during those 17 minutes).
So we are looking to find a root cause for this behavior.
Thanks,
Ramesh

Credit Memo request with reference to Billing Document number via IDoc

Hi,
I want to create credit memo request with reference to billing document number via IDocs.
I have tried through ORDERS05, but when I process I saw that it is only processing with reference to contract number or quotation.
So is any other way of creating credit memo request creation with reference to Billing document number via IDocs?
Thank you in advance.
Regards,
Santhi

Please Help... it is Urgent... Thank you

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Problem in Production as Login Credentials changed

Hi,
This is a scenario from IDOC to JDBC.
This is a case arised due to blocking of the id, which we were previously using in XI for getting connected from R/3 systems, ie the RFC destinations from R/3 to XI were using that login credentials.
So the scenarios failed.
Again we reset the ID with the same password. But the scenario is failing.
The idocs are reaching to XI , but the the pipeline steps are not executed. It is saying " INBOUND INTERFACE NOT FOUND"
This is a problem in Production, and we ve not touched any interface or mapping.Previously the scenario was working fine.
Pls give me the solution and we 'll give 500 points:-)
Regards,
Navneet

Quick Checks:
1. Check the status of User in R/3 which you have used in the RFC destination i.e SM59 and IDOC Adapter ? if it is locked , then unlock it. If password is the problem, then try to change the password.
Don't reset it ...
2. Also check out the status in XI, SM59... what is the user used ? is it correct etc... by testing the connection
3. I think the IDOC Metadata is having problem.. Go to IDX2 and reimport the metadata in XI.
Also note that, it is prefer to use Service User in SM59, and IDOC adapter instead of dialog use in the Production environment. so that no problem of locking etc
Hope this helps`
Rgds Moorthy

ABAP Server Proxy development for creation of IDOC

Hi all,
I am working on JDBC to ABAP Server Proxy where i need to populate fields and then i need to mapp to the standard IDOC ie, SHIPMENT_CREATEFROMDATA01 which will create shipment idoc this is my requirement.Can anyone provide me the proxy development part for creation of IDOC.
Regards,
Bhoj

Hi,
Create server proxy at the receiver end and deploy it using the following links:
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/e2bc3d9ecc6b3be10000000a114084/frameset.htm
Server proxy part1 and part2:
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
Regards,
Vinod.

Opportunities Load via IDOC in CRM

Hi Guys
I am trying to load opportunity via IDOCS. I am using the message type CRMXIF_ORDER_SAVE_M01.
The only problem I am facing is to get a reference lead ID in the Opprtunity.
In easy access the reference lead number is inputted on the details page tab of the opportunity. I am want to load 10,000 opportunities via idoc with each having a reference lead ID.
I am not finding a relevant segment where in the above mentioned IDOC type where I can input the lead number. The Lead ID field name in Easy access is OBJECT_ID3.
Please let me know how I can input the reference Lead ID in an opportunity using IDOCS?

You could get a answer for your query faster in CRM forum.
Regards,
Rajesh Banka

Opportunities Load via IDOCS in CRM

Hi Guys
I am trying to load opportunity via IDOCS. I am using the message type CRMXIF_ORDER_SAVE_M01.
The only problem I am facing is to get a reference lead ID in the Opprtunity.
In easy access the reference lead number is inputted on the details page tab of the opportunity. I am want to load 10,000 opportunities via idoc with each having a reference lead ID.
I am not finding a relevant segment where in the above mentioned IDOC type where I can input the lead number. The Lead ID field name in Easy access is OBJECT_ID3.
Please let me know how I can input the reference Lead ID in an opportunity using IDOCS?

You could get a answer for your query faster in CRM forum.
Regards,
Rajesh Banka

Nfs mount point does not allow file creations via java.io.File

Folks,
I have mounted an nfs drive to iFS on a Solaris server:
mount -F nfs nfs://server:port/ifsfolder /unixfolder
I can mkdir and touch files no problem. They appear in iFS as I'd expect. However if I write to the nfs mount via a JVM using java.io.File encounter the following problems:
Only directories are created ? unless I include the user that started the JVM in the oinstall unix group with the oracle user because it's the oracle user that writes to iFS not the user that creating the files!
I'm trying to create several files in a single directory via java.io.File BUT only the first file is created. I've tried putting waits in the code to see if it a timing issue but this doesn't appear to be. Writing via java.io.File to either a native directory of a native nfs mountpoint works OK. ie. Junit test against native file system works but not against an iFS mount point. Curiously the same unit tests running on PC with a windows driving mapping to iFS work OK !! so why not via a unix NFS mapping ?
many thanks in advance.
C

Hi Diep,
have done as requested via Oracle TAR #3308936.995. As it happens the problem is resolved. The resolution has been not to create the file via java.io.File.createNewFile(); before adding content via an outputStream. if the File creation is left until the content is added as shown below the problem is resolved.
Another quick question is link creation via 'ln -fs' and 'ln -f' supported against and nfs mount point to iFS ? (at Operating System level, rather than adding a folder path relationship via the Java API).
many thanks in advance.
public void createFile(String p_absolutePath, InputStream p_inputStream) throws Exception
File file = null;
file = new File(p_absolutePath);
// Oracle TAR Number: 3308936.995
// Uncomment line below to cause failure java.io.IOException: Operation not supported on transport endpoint
// at java.io.UnixFileSystem.createFileExclusively(Native Method)
// at java.io.File.createNewFile(File.java:828)
// at com.unisys.ors.filesystemdata.OracleTARTest.createFile(OracleTARTest.java:43)
// at com.unisys.ors.filesystemdata.OracleTARTest.main(OracleTARTest.java:79)
//file.createNewFile();
FileOutputStream fos = new FileOutputStream(file);
byte[] buffer = new byte[1024];
int noOfBytesRead = 0;
while ((noOfBytesRead = p_inputStream.read(buffer, 0, buffer.length)) != -1)
fos.write(buffer, 0, noOfBytesRead);
p_inputStream.close();
fos.flush();
fos.close();
}

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

Problem in product creation via IDOC CRMXIF_PRODUCT_SAVE

Similar Messages

Maybe you are looking for