Problem in qty after printing of PO

Hi Gurus,
I'm creating a PO with discount for example i use HB01 (header discount) the original PO qty is 10 pcs after saving and printing of PO the PO qty only show 1 pc only, can u tell me why these happen? can you suggest a solution to fixed these issue?
Hoping to your answer.
Thanks,
Marina

Hi,
   As per your saying your geting this problem with only the discount Articles, Can you check which field is used to print the quantity in Smartform, and Check the quantity field EKPO table in SE11 for both normal item and Discount Item.
Regards
GK.

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • Problem in total PO qty in print out of PO

    Hi Gurus,
    I'm creating a PO with discount for example i use HB01 (header discount) the original PO qty is 10 pcs after saving and printing of PO the PO qty only show 1 pc only, can u tell me why these happen? can you suggest a solution to fixed these issue?
    when there's no discount in PO the total PO qty in print output it's ok, there's no problem.
    Hoping to your answer.
    Thanks,
    Marina

    HI sujeet,
    Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
    Hiii jyojit..
    Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Scroll Bar Problem after Printing a web page containing multiple page data

    Hi All,
    I have a web application which has two DIV, one is main and one is child. I am having problem in printing multiple pages. There is a lot of data in the child DIV and i am using JavaScript functions to control the print functionality. When i print using window.print(), only the data on the main page currently being showed is printed. I further researched and checked out the Style.Overflow property.
    Now i am using divMain.style.overflow = "visible"
    After this the complete print comes. But in Firefox, the scroll bar disappears and only single page is left with no scroll bar .
    Now if after print i give divMain.style.overflow = "Auto" OR divMain.style.overflow = "Scroll", still the scroll bar doesn't come and if it comes then its inactive. I am unable to see the complete data on the page after the print is taken.
    The problem is not coming in I.E and the full data with scroll bar is recovered in I.E.
    Please help me how to get the normal page with full data and scroll bar after printing in Firefox.
    Thanks,
    Manuj

    hi, i would update my reader first to the newest version.
    does the size of the textfield never change, independant how much text is in it?
    perhaps check your subforms, if they are type "position" size does not change in my opinion, except your parent subforms expand to fit....
    or use "flowed" subforms...and regard the parent subforms too!

  • Problems printing from other programs after printing using Word automation

    I have an application that uses ActiveX to build a Word document. My print VI is attached. The problem that users are reporting is that after printing a report with my application, they can't print from any other programs until they restart their computer.
    After my print VI runs, the only other Word automation is Document.Close and Application.Quit. I close all my references religiously and winword.exe closes just fine. I don't know what would be hanging around causing other programs to have trouble printing. One thing I don't like is the ActivePrinter property in Word. It changes the default printer in Windows. This is why I reset it using the printer LabVIEW reports as the default. I tried reading ActivePrinter and storing it in a wire, then resetting it with this string, but then even weirder things happened - the printout got all messed up. This is why I'm using the printer that LabVIEW says is the default.
    Has anyone ever encountered anything like this?
    Message Edited by Marc A on 01-12-2007 11:03 AM
    Attachments:
    Word_print.PNG ‏18 KB

    goldn:
    Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
    1 - create the card and type Command-P.
    2 - select Stylus Photo R200 under Printer
    3 - click on the Advanced button
    4 - in the bottom drop down menu select Paper Handling
    5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
    6 - now select Print Settings in the 3rd drop down menu
    7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
    9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
    10 - click on Print
    11 - when the paper exits the printer quickly put it back in the printer
    That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

  • Print problem in epiphany after upgrade

    I am having printing problems in epiphany after I did my upgrade.  It says epiphany book marks crashed, and it is collecting information to report the bug.  But then it closes everything.  Some pages work fine, but others do not.  Also, I can't choose to print a selection any more.
    is there any way to go back to the old epiphany, or get this one working right?
    Thanks

    HI,
    While in an Upgrade version the drawback of BDC is the screen names,
    number and sequence may change in the upgraded version as compared
    to the previous version.
    In ECC6.0 you again have to do the recording for the required transaction
    from T Code SHDB and then upload the data.
    Hope it helps,
    Regards
    Mansi

  • Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. WHat do you suggest.

    Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. What do you suggest.
    I am using Mozilla Beta 4. I volunteered to try it out. It's lightning fast. I really love using it. I see there is a new version of Firefox should I download it??

    I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.

  • Print problem in SmartForm after upgradation.

    Hello experts
    iam getting a problem in printout from a Z program (Execution) in which some information regarding 'Delivery No.' and 'Invoice No.' is coming from VBFA table.
    Can anyone tell me the reason for not getting the printout.
    I was not getting the print preview either.
    This problem is coming after we have shifted from oracle 9i to 10G. Previously it is running fine.
    Even we have run that smartform alone without program and it was not working
    please reply.
    Regards
    Yogesh Sharma

    Hey Yogesh,
    If you are just looking for the Document number then the tables
    VBRP LIPS and VBAP are sufficient.
    Please paste your select query for me to get a clear picture. anyways here is the flow
    Table VBRP
    VBRP-AUBEL   = Sale order No
    VBRP-AUPOS  = Line item No
    VBRP-VGBEL   = Delivery order No
    VBRP-VGPOS  = Line item No
    Table LIPS
    LIPS-VGBEL = Sale Order No
    LIPS-VGPOS =  Line item No
    Hope this helps
    Regards,
    Ravi

  • HT1338 After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.

    After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.
    Do you have any suggestions?

    Start by telling us what printer you hope to use.
    Look at the printer manufacturers site to see if they have a 10.9 print driver.
    Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
    You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
    http://support.apple.com/kb/HT1341
    If the model is supported you should be able to add it & the driver will be downloaded.

  • System Slow-Down After Printing

    I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
    I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
    Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
    Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • There is a problem communicating with the printer.

    I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
    I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
    In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
    However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
    I've exhausted Lexmark's technical databases and couldn't find the answer here.
    I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
    Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
    1. Your printer is associated with a network, router, or access point, but it is not your network.
    2. A software process is blocked by a system security firewall preventing network communication.
    3. You are logged into Virtual Private Network (VPN).
    4. You are connected to a network but have decided to switch to a USB connection.
    I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
    I can print directly via USB cable, but want to print wirelessly.
    Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
    Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
    Message was edited by: Macman17

    I bet this is too late but...
    Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

  • Windows 8 and IE 10 crashed after printing from Report Manager SQL server 2008 / 2008 R2

    We have a problem with Windows 8 in combination with IE 10 and printing reports.
    When we print a report from the Report Manager 'http://<servername>/reports' the browser crashed after a print.
    Sometimes before printing and somthimes after printing or when you close the browser.
    Al other operating systems like XP, Vista, Windows 7 with different IE versions have no problem.
    I tried the report manager from SQL Server 2008 and SQL Server 2008 R2.
    The same error occured when printing from our Internet application and the reportviewer.
    (ASP application written in Visual Studio 2010 and reportviewer version 10.)
    The event log shows two different messages.
    Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16453, time stamp: 0x509b0dfb
    Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505aaa82
    Exception code: 0xc0000005
    Fault offset: 0x00061252
    Faulting process id: 0x780
    Faulting application start time: 0x01ce03a294f7d1d5
    Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d4a72486-6f96-11e2-be6e-10604b6a74ed
    Faulting package full name:
    Faulting package-relative application ID:
    Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16384, time stamp: 0x50107ee0
    Faulting module name: rsclientprint.dll, version: 2009.100.1600.1, time stamp: 0x4bb67a74
    Exception code: 0xc0000005
    Fault offset: 0x00017e7a
    Faulting process id: 0x9c8
    Faulting application start time: 0x01ce02f35c70ab85
    Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
    Faulting module path: C:\Windows\Downloaded Program Files\rsclientprint.dll
    Report Id: a13fccc6-6ee6-11e2-be67-10604b6a74ed
    Faulting package full name:
    Faulting package-relative application ID:
    Is there a fix for this problem?

    Dear Mike Yin,
    Thank you for your response. Your answer was the
    reason for finding the real problem.
    In december 2010 a SQL Server 2008 fix was the cause. I don't remember exactly the problem, but we changed the RSCLIENTPrint-x86.cab file. But instead to use the version of SQL Server 2008 we used the version of SQL Server 2008
    R2 (10.50.1600.1). This worked until
    Windows 8 (Internet Explorer crashed when printing).
    We fixed this problem by using the RSClientPrint-x86.cab file from SQL server 2008 (10.0.5500.0).
    But we now get the known problem that the
    activeX always must be installed again. 
    The reason for this is that the version of
    the SQL Server (10.0.5512.0) 
    and the rsclientprint.dll (10.0.5500.0) is different. SQL Server is newer (caused
    by a security patch (KB2716436)).
    Do you know when this problem will be resolved
    by Microsoft?
    Work arrounds
    I've also tried to install the RSClientprint.dll
    every time automatically (without user interaction).
    But this will be delayed the printing for more
    than 4 seconds. This
    is very annoying.
    Another workaround is to generate a PDF and print the PDF. But this is also
    a lot slower.
    Uninstall the security patch. but I don't know the security risk.

  • Problem with countinuous paper printing in dot matrix printer

    Hi All,
      I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If  i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
    I have developed one smartform for this and i have used A4 size page format.
    I have tried to change the Printer initialization code to 86 lines for DINA4.  Still no change in continuous printing.
         Printer initialization
         Reset after exit
         Cover page
         First Page
         Start of even page
         Start of odd page
         Start of page
         End of first page
         End of even page
         End of odd page
         End of page
         Start of line on an even page
         Start of line on an odd page
         Start of line
         End of line on an even page
         End of line on odd page
         End of line
    Printer initialization
    # reset
    \e\0x40
    # select character table 3 -> PC 437 character set
    \e\0x74\0x03
    # set line spacing 6 LPI
    \e\0x32
    # set page length 86 lines
    \e\0x43\0x46
    # cancel bottom margin
    \e\0x4F
    # set left margin to 0
    \e\0x6C\0x00
    # select LQ quality
    \e\0x78\0x01
    # select non-proportional spacing
    \e\0x70\0x00
    Can any one help me.
    Thanks,
    Vishnu

    Hi Vishnu,
    Above you have the following commands:
    set line spacing 6 LPI
    \e\0x32
    set page length 86 lines
    \e\0x43\0x46
    46 HEX = 70
    So the above settings mean 70 lines at 6 LPI = 11.66 inches.
    So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
    Regards,
    Aidan

  • Problem with line items print in Script MAIN window.

    Dear Friends,
    I am facing a problem with display the line items in main window.
    Here i have created my form with 2 pages,
    in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
    i am having the Footer information about to off the page.
    and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
    my client want me to remove that place also. he wants to display continue..
    i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
    Thanks
    Sridhar.

    Hi Sridher,
    If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
    Regards,
    Vidya.

Maybe you are looking for