Problem in reporting - Urgent

Hi,
I am having one key figure: ZSDOVBAP_CK0002 in my query design. I am not able to find the corresponding above mentioned field in the query based ODS.
Can you please advice me, whether above mentioned Z field is of enhancement if its so, please tell me the way to find that enhancement.
This is an urgent requirement for me to solve.
Thanks & Best Regards,
Narayana

Hi Narayana.
From the name of the KF it seems like it is a calculated key figure, which is why you don't find it in the ODS. You will only see the a calculated KF in the query designer and not in the maintanence of the ODS/cube.
Hope it helps.
BR
Stefan

Similar Messages

Mailing Problem in Reports Writer 3.0 (URGENT)

Hello,
I 'm facing mailing problem in Reports Writer 3.0.
All Reports files (.rep) are stored on NT Server(in a particular
dir) and I have full permission (on that dir).
After running the report, when I try to send mail then it gives
the following error
REP-4203: Error occurred while sending a mail message.
REP-4221: Cannot access attachment file.
So pls. suggest me.
Thanks
PSR
null

This is the wrong forum for reports issues - particularly for such an old version :-) However, you'll have to write a user exit to do that kind of stuff. And no don't ask me how, it was all too long ago, but there should be a section on that in your manual.

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Problem refreshing reports with params in the Interactive viewer from ASP

I have a problem getting reports to refresh by clicking the Interactive Viewer's refresh button and reusing the supplied parameters. I am seeing this exact same problem on both V9.2 and 11.5 unmanaged RAS servers.
I am using the following function code to set the reports parameters:
Public Sub PassParameter(param_index, param_value, param_is_multi,param_range_kind)
    Dim param_old ' parameter field in the report
    Dim param_new ' parameter field that will replace old parameter
Dim paramValue ' discrete parameter value
Dim aValues
Dim rValues
Dim iLoop
Set param_old = clientDoc.DataDefinition.ParameterFields.Item(param_index)
Set param_new = objFactory.CreateObject("CrystalReports.ParameterField";)
If param_range_kind = 1 then
Set paramValue = objFactory.CreateObject("CrystalReports.ParameterFieldDiscreteValue";)
paramValue.Value = param_value
else
Set paramValue = objFactory.CreateObject("CrystalReports.ParameterFieldRangeValue";)
     rValues = split(param_value, "|")
paramValue.BeginValue = rValues(0)
paramValue.EndValue = rValues(1)
paramValue.LowerBoundType = 2
paramValue.UpperBoundType = 2
end if
param_old.CopyTo param_new
if param_is_multi = 0 then
param_new.CurrentValues.Add paramValue
else
     aValues = split(param_value, ",")
   For iLoop = LBound(aValues) to UBound(aValues)
param_new.CurrentValues.Add Trim(aValues(iLoop))
    Next
end if
clientDoc.DataDefController.ParameterFieldController.Modify param_old, param_new
    ' Clean up
    Set paramValue = Nothing
    Set param_new = Nothing
End Sub
and then redirecting to another ASP page to invoke the viewer (the report "clientDoc" object is passed to the viewer asp page a s a session variable). The code of the viewer page is:
<%
Response.ExpiresAbsolute = Now() - 1
Response.Charset=";UTF-8"
Dim clientDoc
Set clientDoc = session("clientDoc")
Dim ObjFactory, RptAppSession
Set ObjFactory = CreateObject("CrystalReports.ObjectFactory";)
Dim viewer
Set viewer = ObjFactory.CreateObject("CrystalReports.CrystalReportInteractiveViewer";)
viewer.PageTitle = "Interactive Report - " & Request("rptnam")
viewer.IsOwnForm = true
viewer.IsOwnPage = true
viewer.HasRefreshButton = true
viewer.EnableParameterPrompt = false
viewer.ReuseParameterValuesOnRefresh ; = true
viewer.HasExportButton = false
' viewer.HasPrintButton = false
viewer.ReportSource = clientDoc.ReportSource
Dim BooleanSearchControl
Set BooleanSearchControl = ObjFactory.CreateObject("CrystalReports.BooleanSearchControl";)
BooleanSearchControl.ReportDocument = clientDoc
viewer.BooleanSearchControl = BooleanSearchControl
viewer.ProcessHttpRequest Request, Response, Session
%>
If I set viewer.EnableParameterPrompt = false then I get an erro upon clicking the viewer's refresh button (error is: Missing parameter values. webReporting.dll error '8004100e' ), but if I set viewer.EnableParameterPrompt = true, then I get the automatically generated prompts appear but they are all empty. Either way, RAS doesn't remember the supplied parameters. I know the parameters are being read by RAS as the report's contents prove this fact, but they are not remembered after refreshing. If the automatically generated prompts are filled in and submitted, subsequent refreshes work correctly.
How do I get the report viewer to reuse the parameters that have been set programmatically after a refresh? BTW, changing my implementation to anything other than using ASP against an unmanaged RAS server is not an option at this time.
Thanks in advance!
Dave.

Hi Dave,
I don't have a "nice" set of code lines but below hard codes one parameter name and value:
            ISCRParameterField newParameterField = new ParameterFieldClass();
            newParameterField.ParameterType = crParameterFieldTypeEnum.crParameterFieldTypeReportParameter;
            newParameterField.Name = "YourParamName"; // you can make a collection here
            newParameterField.ReportName = "";
            newParameterField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
            newParameterField.AllowMultiValue = true;
            newParameterField.AllowCustomCurrentValues = true;
            Fields parameterFields = reportClientDocument.DataDefinition.ParameterFields;
            ISCRField existingParameterField;
            RowsetMetaData rowsetMetaData = new RowsetMetaDataClass();
            Fields fields = new FieldsClass();
            ArrayList defaultValues = new ArrayList();
            reportClientDocument.DataDefController.ParameterFieldController.SetCurrentValue("", @"YourParamName", @"YourParamValue");
Thanks again
Don

Problem in reports 6i while using delimiter option.

Hi,
I am facing problem in report writer while using delimiter option.
Report summary
==============
In my report I am having two queries in data model and two different repeating frame for each in layout.
These quires are called based on the user parameter. That means if user parameter is 1 then query 1 is called and the report is kick off and same for query 2 when user parameter is 2).
Problem Encountered
=================
Both these reports are running fine while using pdf option to generate report .
While using delimiter option only one of the query is able to generate report (based on which ever is created first and rest will give 0 byte file).
I have also trapped it while using messages and it is logically flowing fine.
I think report writer does not support such scenario.
please expedite on this.
thankx
peyush

Hi,
There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
Thanks,
Rohit Hi Rohit,
Thanks for the information.
well I am generating single output file on each run .
the problem is somewhat funny.
I have build query2 in data model after query1.
query 1 is giving me correct output both in .PDF and delimiter version.
But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
When I took out query2 to another module it is running fine for both.
I hope this make sense.
Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
Thanks
Mohit...

RAXINV - Strange problem in Report Builder

I'm having a very wierd problem in Report builder 6.0.8.27.0. I'm simply trying to add two additional columns to the AR Invoice report (RAXINV) so that they get included in the XML output. This report has a main query called Q_INVOICE which is basically a dummy query to set the column aliases and at the end of the query it does a UNION with the user parameter &common_query.
So, what I have done is gone into the common_query parameter and added the two extra dummy columns before the FROM statement (I've tried adding at different places but always the same result). Once that is done I've then gone into the Q_INVOICE query and added the same two columns. When I hit the OK button to update the query is when my problems start.
There is a group in the report called G_ORDER_BY that has the field ORDER_BY in it. After clicking ok to update the query the G_ORDER_BY now has a field called BILL_CUST_NAME1, but the XML tag is still saying ORDER_BY. This happens to many fields in the report (the names are changed/corrupted) and as such the report is now useless as it won't compile.
I have no idea why this would happen and I've never seen anything like this before.
Can anyone provide any help on this ? I've logged an SR on this too but wanted to try here also incase someone had already crossed this problem.

Dave,
Not sure if its relevant or not, but I just fixed this issue, you need to change your query in three places, common_query parameter, build_query program unit and the main query itself in report editor.
Cheers,
Zeeshan

Sign problem in Report

Hi Folks,
I have a problem in reporting.
We are getting a data from flat file and loaded in to ICELIM cube and later that will pull into Managerial Consolidation Cube.
P99T is account member and its ACCTYPE is EXP and its a parent member.
We created a one report based on ICELIM cube its showing negative values for the member P99T. Created another report based on Managerial Consolidation Cube, Here the same member showing Positive values.
Can any one please let me know what is the problem is?
I need Positive values in Both reports.
Regards,
G. Saida Reddy

Hi vadim,
Thank you for you response,
Recently I take over this project, Previously one guy is handled all those things.
But if "Descendants of P99T is Applicant count=EXP(ACCTYPE), FT=EXP(ACCTYPE), Applicant Rate= EXP(ACCTYPE)" then P99T is meaningless - how can you aggregate count, FT and rate????
Can you please let me know the what is the exact point your are saying from above.
we have positive signs for base members of ICELIM and Managerial Consolidation.
Now it is not possible to change moving data from ICELIM to Managerial Consolidation.
can you please let me now the issue for sign in the report?
Regards,
G. Saida Reddy

Problem printing report

I have a small problem printing reports which exist of 1 page.
1st report is printed OK
2nd one is bad
3rd one is bad
4rd one is bad
5th is OK again... and so further.
When I choose a different printer, all prints are OK. When I print from another PC on the same printer, all prints are OK.
I assume some settings are disturbing the prints; can anyone suggest where I should take a look?

are you using a dot matrix printer or a laser printer?

Problem running reports

I finally configured and was able to start the reports server on my Solaris box. The listener is running. When I run a report, either by command line using rwrun60 or from a form using RUN_REPORT_PRODUCT, the report kicks off without error but will not finish. I have to kill the process, and no output results. I had no problems when running from NT, so I'd bet the problem is in the configuration not the report itself. Any ideas?

I'm still working this problem.
I have a printer configured, and have no problem generating report in character mode and send directly to printer.
I did have to add localhost access to Xwindows with
$ xhost +localhost
Now I have valid display value.
Unfortunately, still having the same problem. rwrun60 kicks off, but gets hung. I have no problems running forms on the this server. Any other ideas?

Triggers problem - please help - urgent !!

To all experts, please help me with this problem - need answer
urgently. Thanks in advance.
Using Oracle 8 Rel 8.0.6
I have 2 tables (table Y, table Z).
In the 'after insert upd del on each row trigger' (lets call it
AIUD trigger)on table Y, based on certain criteria, I insert a
record in table Z.
New requirement is that whenever a record is inserted in table Z
(fyi, inserting any record in table Z is possible only when
records are inserted in table Y as mentioned earlier thro the
AIUD trigger - i.e. there is no frontend way to insert records
in table Z), if certain (new) criteria is satisfied, I should
insert 1 record in both, table Y and table Z.
I tried to create meet the new requirement by adding code to
existing AIUD trigger but ran into mutating tables error. So I
dropped this idea.
I have now created 'after insert on each row trigger' (lets call
it NEW_TRIGGER) on table Z to meet the new requirement but have
these 2 problems :
1) the trigger always compiles with errors
2) if I still go ahead and insert a record in table Y, I get the
foll error msgs :
ORA 4098 - NEW_TRIGGER is inv
ORA 6512 at line xxx on AIUD
ORA 4088 error during execution of trigger AIUD
What is the best way to work on this requirement or what am I
doing wrong ?
Thanks again,
AG.

Your restatement of the problem merely confirms what the previous
posting said. You cannot write a trigger on table Y that inserts
a record into table Y: that's the mutating trigger problem
(there's oodles of postings on the subject, not to mention
online Oracle docs). You could write a trigger on table Z that
inserts into table Y - but you need to be able to see the value
I3 which (presumeable) you can't.
One solution is to use code the trigger on table Y to submit a
call to DBMS_JOB which initiates a procedure that inserts a
record into table Y.
You must remember that the new record in table Y must never
include the value I3, otherwise you'll end up w/ an infinite
loop.
rgds, APC

Soritng problem in report

Hi all
I have a problem in report runtime decision.
I have created a report say report1....and on runtime i decide its runtime sorting order by passing a column value
through my USER PARAMETER to the ORDER BY clause.
But the problem is that the data model has its own BREAK ORDER as well for each column.
How can i change that property at runtime.
Kindl guide me if any one knows the solution.
Thanx,
Qaiser Qayum Malik.

Hi,
Pl see this thread:
Order By within repeating frame
By the way, break order decides the sorting order ONLY if the report has break-groups. If your report has a single group, the order by clause should work.
navneet.

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Urgent: problems in report creation

Hi All,
My requirement is to report on opportunities cube with product hierarchy I have loaded product hierarchy first followed by opportunities but my problem is when i open opportunities cube in BEx analyzer i can see only key that is present in OPP item datasource but i cannot view hierarchy and text evenafter choosing hierarchy; in query output product related objects are displayed as not assigned i even executed hirearchy attribute change run. Would anyone put light on it.
And also I extracted long text thru generic created FM into BW as Characteristic as data target and I passed primary key to cube eventhan i cannot bring the text here also in output not assigned is displayed under text objects. In generic datasource i have taken STXH-TDNAME as primary key but in OPP 0CRM_OHGUID is same as TDNAME(32) i used 0CRM_OHGUID as key in report but text is not displaying. would anyone tell me what is the normal procedure to bring long text(4 parts 60char each) into report after extracting into bw.
would anyone help me in this issues.I appreciate it in advance.
Thanks a lot
Regards
Kishore

Hi BB,
I appreciate it for quick response. I have created Datasource with TDNAME(STXH), 4 text fields and langu and replicated by splitting in CRM into BW it works fine but my problem is when i check the texts in BW; crm texts are coming into BW and I added the relevant key object in cube and created report on cube; in that the texts are not displaying rather as "not assigned" when i create report only on texts it is working. Would you explain me what might be the problem I have created datasource in crm by taking first 32 char of tdname from Stxh table which is same as GUID and than replicated will it create some prob if yes tell me which field i need to take as key field in order to extract OPPORTUNITIES text into BW.
for read_text i passed parameters only from STXH table.
And also If You would put some light on first Issue in my previous post it will be really great.
Thanks a lot
Regards
KIshore

Problem in Auto Mail of ALV Report : Urgent

Hello All ,
I have created one ALV Report contain 240 Columns . This report is need to schedule for auto mail in HTML Format.
My Problem is when I am sending this report manually the html output displays all the columns in the mail attachment. While it is scheduled thro' SM36 in background mode the HTML format displays only restricted columns (say upto 132 columns)
Also, we have tried to create new page format X_65_512/2 to accomodate the output. However this option did not work.
Any solution to resolve the same is most welcome !
Regards
Swati Namdeo

Hi
This problem was not resolved. I tried few things but not good. So what we did we created a few profile like MM/SD/FICA and we executed report based on profile and sent them only the column relevant to them.
Regards,
Atul Joshi

Problem in reporting - Urgent

Similar Messages

Maybe you are looking for