Problem in running a ABAP OLE Excel program in Web Portal
Hi,
Do anyone know how to solve the following problem ?
I have write a ABAP program in R/3 to use OLE to create a Excel file.
The program can run successful in front end workstation through SAPGUI.
However, when I run this ABAP program through the Web Portal by "Workset"
After I input the selection criteria and execute the program:
The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return with error "SY-SUBRC = 2".
How can I solve it ?
Can OLE Excel Abap Program can run on Web Portal through the "Workset" ?
Thanks so much,
Mark
Hi
check this might help
Re: Displaying Error while uploading Excel Sheets
jo
Similar Messages
-
Failed to Run OLE Excel program in background JOB (SM36)
Please help.
I have write a program to use OLE to create a Excel file.
The program can run successful in front end workstation. However, when I run the program in background job by SM36.
The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return with error "SY-SUBRC = 2".
How can I solve it ?
Can OLE Excel be run on background job ?
Thanks so much,
MarkHi Mark:
Your need is a very common one. I also was asked to generate an Excel in Background.
It is not possible to work with OLE in background mode.
The reason is: In background mode there is no presentation server. OLE is executed in presentation server.
Below I paste the code I wrote to solve my problem.
This class sends a mail with an excel attached. The Excel content will be the internal table you pass to the class. But the Excel is not binary, it is a plain text file, separated by tabulators. Anyway, when you open it with Excel, the columns are properly shown.
Sorry. Comments are in spanish, I don't have time to translate it.
I kindly ask to everybody which want to use it to keep my name in the code.
* Autor: Jordi Escoda, 30/10/2008.
* Descripción: Esta clase genera un correo electrónico destinado a
* una persona, adjuntando el contenido de una tabla interna como
* Excel (campos separados por tabuladores).
* La virtud de esta clase es su sencillez de utilización. Para lanzar
* el mail con el excel adjunto basta con declarar la tabla interna,
* llenarla, colocar el asunto del mensaje, el destinatario, el nombre
* del excel adjunto, y pasar la tabla interna.
* Ejemplo de utilización:
* DATA: lc_mail TYPE REF TO cl_mail_builder_xls_attach.
* DATA: lt_anla TYPE STANDARD TABLE OF anla.
* SELECT * INTO TABLE lt_anla FROM anla.
* CREATE OBJECT lc_mail.
* CALL METHOD lc_mail->set_subject( 'Excel adjunto' ).
* CALL METHOD lc_mail->set_recipient( 'XXX@XXXDOTCOM' ).
* CALL METHOD lc_mail->set_attach_filename( 'ANLA' ).
* APPEND 'Cuerpo del mensaje' TO lt_body.
* APPEND 'Saludos cordiales' TO lt_body.
* CALL METHOD lc_mail->set_bodytext( lt_body ).
* CALL METHOD lc_mail->set_attach_table( lt_anla ).
* CALL METHOD lc_mail->send( ).
* CLASS cl_mail_builder_xls_attach DEFINITION
CLASS cl_mail_builder_xls_attach DEFINITION.
PUBLIC SECTION.
METHODS: set_subject
IMPORTING im_subject TYPE so_obj_des,
set_bodytext
IMPORTING im_body TYPE bcsy_text,
set_recipient
IMPORTING im_recipient TYPE ad_smtpadr,
set_attach_table
IMPORTING im_table TYPE ANY TABLE,
set_attach_filename
IMPORTING im_attach_name TYPE sood-objdes,
send.
PRIVATE SECTION.
CONSTANTS:
c_tab TYPE c VALUE cl_bcs_convert=>gc_tab,
c_crlf TYPE c VALUE cl_bcs_convert=>gc_crlf,
c_singlequote TYPE c VALUE '.
DATA: l_recipient_addr TYPE ad_smtpadr.
DATA: send_request TYPE REF TO cl_bcs,
document TYPE REF TO cl_document_bcs,
recipient TYPE REF TO if_recipient_bcs,
bcs_exception TYPE REF TO cx_bcs.
DATA: binary_content TYPE solix_tab,
size TYPE so_obj_len.
DATA: l_string TYPE string,
l_body_text TYPE bcsy_text,
l_subject TYPE so_obj_des,
l_attach_name TYPE sood-objdes.
METHODS: create_binary_content,
get_dataelement_medium_text
IMPORTING im_table_name TYPE tabname
im_field_name TYPE fieldname
EXPORTING ex_medium_text TYPE scrtext_m.
ENDCLASS. "cl_mail_builder_xls_attach DEFINITION
* CLASS cl_mail_builder_xls_attach IMPLEMENTATION
CLASS cl_mail_builder_xls_attach IMPLEMENTATION.
METHOD set_bodytext.
l_body_text[] = im_body[].
ENDMETHOD. "add_bodytext
METHOD set_subject.
l_subject = im_subject.
ENDMETHOD. "add_subject
METHOD set_attach_filename.
l_attach_name = im_attach_name.
ENDMETHOD. "add_subject
METHOD set_recipient.
l_recipient_addr = im_recipient.
ENDMETHOD. "add_subject
METHOD set_attach_table.
* Rellena en un string el contenido de la tabla interna recibida
DATA: ref_to_struct TYPE REF TO cl_abap_structdescr.
DATA: my_like TYPE fieldname,
nombretabla TYPE tabname,
nombrecampo TYPE fieldname,
texto_mediano TYPE scrtext_m.
DATA: l_idx TYPE i,
l_valorcampo(16) TYPE c,
l_long TYPE i.
FIELD-SYMBOLS: <fs_linea> TYPE ANY,
<fs_campo> TYPE ANY.
FIELD-SYMBOLS: <comp_descr> TYPE abap_compdescr.
CHECK NOT im_table[] IS INITIAL.
* Línea con los nombres de las columnas.
CLEAR l_string.
LOOP AT im_table ASSIGNING <fs_linea>.
* Toma los atributos del componente
ref_to_struct =
cl_abap_structdescr=>describe_by_data( <fs_linea> ).
LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
ASSIGN COMPONENT <comp_descr>-name
OF STRUCTURE <fs_linea> TO <fs_campo>.
* Obtenemos el origen de donde proviene (like). Ej:BKPF-BUDAT
DESCRIBE FIELD <fs_campo> HELP-ID my_like.
SPLIT my_like AT '-' INTO nombretabla nombrecampo.
CALL METHOD get_dataelement_medium_text
EXPORTING
im_table_name = nombretabla
im_field_name = nombrecampo
IMPORTING
ex_medium_text = texto_mediano.
IF texto_mediano IS INITIAL.
CONCATENATE l_string <comp_descr>-name INTO l_string.
ELSE.
CONCATENATE l_string texto_mediano INTO l_string.
ENDIF.
AT LAST.
CONCATENATE l_string c_crlf INTO l_string.
EXIT.
ENDAT.
CONCATENATE l_string c_tab INTO l_string.
ENDLOOP.
EXIT.
ENDLOOP.
* Contenido de la tabla
LOOP AT im_table ASSIGNING <fs_linea>.
* Toma los atributos del componente
ref_to_struct =
cl_abap_structdescr=>describe_by_data( <fs_linea> ).
LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
* Asignamos el componente ue tratamos, para obtener
* el valor del mismo
ASSIGN COMPONENT <comp_descr>-name OF STRUCTURE <fs_linea>
TO <fs_campo>.
CASE <comp_descr>-type_kind.
WHEN 'P'. "Packed Number
* Convierte a caracter
WRITE <fs_campo> TO l_valorcampo.
CONCATENATE l_string l_valorcampo INTO l_string.
WHEN OTHERS.
l_long = STRLEN( <fs_campo> ).
IF l_long > 11 AND <fs_campo> CO ' 0123456789'.
* El Excel muestra un número tal como 190000000006
* en formato 1,9E+11.
* Para eviarlo, los números de más de 11 dígitos los
* concatenamos con comillas simples.
CONCATENATE l_string c_singlequote
<fs_campo> c_singlequote INTO l_string.
ELSE.
CONCATENATE l_string <fs_campo> INTO l_string.
ENDIF.
ENDCASE.
AT LAST.
* Añade CRLF
CONCATENATE l_string c_crlf INTO l_string.
EXIT.
ENDAT.
* Añade tabulador
CONCATENATE l_string c_tab INTO l_string.
ENDLOOP.
ENDLOOP.
create_binary_content( ).
ENDMETHOD. "set_attach_table
METHOD create_binary_content.
DATA: l_size TYPE so_obj_len.
* convert the text string into UTF-16LE binary data including
* byte-order-mark. Mircosoft Excel prefers these settings
* all this is done by new class cl_bcs_convert (see note 1151257)
TRY.
cl_bcs_convert=>string_to_solix(
EXPORTING
iv_string = l_string
iv_codepage = '4103' "suitable for MS Excel, leave empty
iv_add_bom = 'X' "for other doc types
IMPORTING
et_solix = binary_content
ev_size = size ).
CATCH cx_bcs.
MESSAGE e445(so).
ENDTRY.
ENDMETHOD. "create_binary_content
METHOD send.
DATA: l_sent_to_all TYPE os_boolean.
TRY.
* create persistent send request
send_request = cl_bcs=>create_persistent( ).
* create and set document with attachment
* create document object
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = l_body_text
i_subject = l_subject ).
* add the spread sheet as attachment to document object
document->add_attachment(
i_attachment_type = 'xls'
i_attachment_subject = l_attach_name
i_attachment_size = size
i_att_content_hex = binary_content ).
* add document object to send request
send_request->set_document( document ).
* add recipient (e-mail address)
recipient =
cl_cam_address_bcs=>create_internet_address(
l_recipient_addr ).
* add recipient object to send request
send_request->add_recipient( recipient ).
* send document
l_sent_to_all = send_request->send(
i_with_error_screen = 'X' ).
COMMIT WORK.
IF l_sent_to_all IS INITIAL.
MESSAGE i500(sbcoms) WITH l_recipient_addr.
ELSE.
MESSAGE s022(so).
ENDIF.
CATCH cx_bcs INTO bcs_exception.
MESSAGE i865(so) WITH bcs_exception->error_type.
ENDTRY.
ENDMETHOD. "lcl_mail_xls_attachment
METHOD get_dataelement_medium_text.
DATA: lt_fld_info TYPE STANDARD TABLE OF dfies,
wa_fld_info TYPE dfies.
* Busca en el diccionario los datos del campo
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = im_table_name
fieldname = im_field_name
langu = sy-langu
TABLES
dfies_tab = lt_fld_info
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
CLEAR ex_medium_text.
IF sy-subrc = 0.
READ TABLE lt_fld_info INDEX 1 INTO wa_fld_info.
* Si lo ha podido tomar del diccionario...
IF NOT wa_fld_info-scrtext_m IS INITIAL.
* Toma el nombre del nombre de campo del diccionario
ex_medium_text = wa_fld_info-scrtext_m.
ENDIF.
ENDIF.
ENDMETHOD. "get_dataelement_medium_text
ENDCLASS. "cl_mail_builder_xls_attach IMPLEMENTATION -
Hi Expert,
I got a problem using OLE2 to passing the logo into excel file. the rest of data I have already passed in. but except the logo I can't pass it, anybody know the function module or method used to print the logo in excel using OLE2 ? Thank you
Best regards,
KohokohoHi,
Check this links for inserting a picture to an excel using OLE2:
Wiki:
http://wiki.sdn.sap.com/wiki/display/Community/InsertPictureImageinExcelusingOLE+Automation
Thread:
Re: download output with logo to excel file.
Regards,
Swarna Munukoti -
Problem while running dos command from java program
Dear friends,
I need to terminate a running jar file from my java program which is running in the windows os.
For that i have an dos command to find process id of java program and kill by using tskill command.
Command to find process id is,
wmic /output:ProcessList.txt process where "name='java.exe'" get commandline,processid
This command gives the ProcessList.txt file and it contains the processid. I have to read this file to find the processid.
when i execute this command in dos prompt, it gives the processid in the ProcessList.txt file. But when i execute the same command in java program it keeps running mode only.
Code to run this command is,
public class KillProcess {
public static void main(String args[]) {
KillProcess kProcess = new KillProcess();
kProcess.getRunningProcess();
kProcess = new KillProcess();
kProcess.readProcessFile();
public void getRunningProcess() {
String cmd = "wmic /output:ProcessList.txt process where \"name='java.exe'\" get commandline,processid";
try {
Runtime run = Runtime.getRuntime();
Process process = run.exec(cmd);
int i = process.waitFor();
String s = null;
if(i==0) {
BufferedReader stdInput = new BufferedReader(new
InputStreamReader(process.getInputStream()));
while ((s = stdInput.readLine()) != null) {
System.out.println("--> "+s);
} else {
BufferedReader stdError = new BufferedReader(new
InputStreamReader(process.getErrorStream()));
while ((s = stdError.readLine()) != null) {
System.out.println("====> "+ s);
System.out.println("Running process End....");
} catch(Exception e) {
e.printStackTrace();
public String readProcessFile() {
System.out.println("Read Process File...");
File file = null;
FileInputStream fis = null;
BufferedReader br = null;
String pixieLoc = "";
try {
file = new File("ProcessList.txt");
if (file.exists() && file.length() > 0) {
fis = new FileInputStream(file);
br = new BufferedReader(new InputStreamReader(fis, "UTF-16"));
String line;
while((line = br.readLine()) != null) {
System.out.println(line);
} else {
System.out.println("No such file");
} catch (Exception e) {
e.printStackTrace();
return pixieLoc;
} when i remove the process.waitFor(), then while reading the ProcessList.txt file, it says "No such file".
if i give process.waitFor(), then it's in running mode and program is not completed.
Colud anyone please tell me how to handle this situation?
or Is there anyother way to kill the one running process in windows from java program?
Thanks in advance,
SathishHi masijade,
The modified code is,
class StreamGobbler extends Thread
InputStream is;
String type;
StreamGobbler(InputStream is, String type)
this.is = is;
this.type = type;
public void run()
try
InputStreamReader isr = new InputStreamReader(is, "UTF-16");
BufferedReader br = new BufferedReader(isr);
String line=null;
while ( (line = br.readLine()) != null)
System.out.println(type + ">" + line);
} catch (IOException ioe)
ioe.printStackTrace();
public class GoodWindowsExec
public static void main(String args[])
try
String osName = System.getProperty("os.name" );
String[] cmd = new String[3];
if( osName.equals( "Windows 95" ) )
cmd[0] = "command.com" ;
cmd[1] = "/C" ;
cmd[2] = "wmic process where \"name='java.exe'\" get commandline,processid";
} else {
cmd[0] = "cmd.exe" ;
cmd[1] = "/C" ;
cmd[2] = "wmic process where \"name='java.exe'\" get commandline,processid";
Runtime rt = Runtime.getRuntime();
System.out.println("Execing " + cmd[0] + " " + cmd[1]
+ " " + cmd[2]);
Process proc = rt.exec(cmd);
System.out.println("Executing.......");
// any error message?
StreamGobbler errorGobbler = new
StreamGobbler(proc.getErrorStream(), "ERROR");
// any output?
StreamGobbler outputGobbler = new
StreamGobbler(proc.getInputStream(), "OUTPUT");
// kick them off
errorGobbler.start();
outputGobbler.start();
// any error???
int exitVal = proc.waitFor();
System.out.println("ExitValue: " + exitVal);
} catch (Throwable t)
t.printStackTrace();
}when i execute the above code, i got output as,
Execing cmd.exe /C wmic process where "name='java.exe'" get commandline,processid
and keeps in running mode only.
If i execute the same command in dos prompt,
CommandLine
ProcessId
java -classpath ./../lib/StartApp.jar;./../lib; com.abc.middle.startapp.StartAPP 2468
If i modify the command as,
cmd.exe /C wmic process where "name='java.exe'" get commandline,processid > 123.txt
and keeps in running mode only.
If i open the file when program in running mode, no contents in that file.
If i terminte the program and if i open the file, then i find the processid in that file.
Can you help me to solve this issue? -
How to run custom Oracle report6i concurrent program in web forms
I developed a custom report using oracle6i and registered into AOL and assigned to a request group. I can run this concurrent program from form based application works fine. How to run this concurrent request from web forms?
What are the steps to follow to create a concurrent program link on web forms?
I want run this request and pass parameters and output also in web forms...
I'm a first time user of web forms, So kindly reply with detailed steps to define concurrent request in web forms for a custom report.
Thanks in Advance
Naveen
[email protected]I hope ur requirement to do all the CP processing from Self-Service OAF pages. If so,
browse thru Re: Start Concurrent from OA Framework page , Re: RE: Submitting concurrent request and getting the results back.
and
'Concurrent Processing: Request Submission and Monitoring' section in dev guide.
Let us know if you face any issues in the implementation.
- Senthil -
Problem in running WAR file developed through NetBeans Visual Web
hi all,
actually i developed a web application in JSF using IDE NetBeans Visual Web.
application is having a table which is connected to database ( MySQL ).... i dragged my database table on visual web's table and all the connections were automatically created. i m using tomcat as a web server.
application runs fine through Netbeans but wen i deployed its war file in tomcat and tried to run.....browser showed me the table but the data was not there.....infact i m getting "No items in the table" written, in my table on browser.
plz help.....thnx in advance
PranayRamchow --
One suggestion is to use JDeveloper to do the deployment.
Create a connection in JDeveloper to the OC4J instance you wish to deploy to, then create a new deployment profile for your application and let JDeveloper perform the deploymnent for you.
Once it's working, you can then go and look at the OC4J configuration files and see the tags looks like to perform the deployment correctly.
Note that JDeveloper will deploy the WAR file by first wrappering it in an EAR file.
-steve- -
Dump while running a program with OLE Excel download facility in ITS
Hi,
Because of some complex requirment, I had created a report program which will download the data to an Excel sheet using SAP OLE Automation Controller. For this report i had created a tcode too.
The report which i developed is perfectly working fine in SAPGUI. But if i access the same report throught SAP ITS serice. I am getting a dump. Please find below the dump details. I am not able to figure it out why the dump is not coming in SAPGUI.
Runtime Errors MESSAGE_TYPE_X
Date and Time 09.03.2010 05:35:41
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
|
Error analysis
Short text of error message:
Control Framework : Error processing control
Long text of error message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
system
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Technical information about the message:
Message class....... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 120
User................ "XXXXXX"
Language Key........ "E"
Transaction......... "ZGA_BEACON_SOX_RPT "
Transactions ID..... "4B95E2560EB62F9AE10000000A241C33"
Program............. "SAPLOLEA"
Screen.............. "ZGA_REP_BEACON_SOX_REPORT 9000"
Screen Line......... 0
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "10.36.28.52"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/gui/sap/its/webgui/~flNUQVRFPTIzNzIxLjAxNC4wNC4
wNA=="Hi All,
FYI.....
As I said because of my complex requirement, i am using OLE excel download facilities to download the data. ITS wont support this OLE download facility. This can be done only through local SAP GUI.
The reason for this is that, when i am using this download facility through SAP GUI, OLE object thats used in my report program will directly talk to the Local OLE excel objects (i.e. the local installed Excell application) and download the data. But if it's through ITS, my program wont be able to communicate with the local excel OLE objects because of this i am getting a DUMP.
Thank You all for the support. All the best in future.
Regards
Maneesh Chandran -
How to run a ABAP Program in Batch JOB
How to run a ABAP Program in Batch JOB ?
Hello Manish,
Using transaction SM36 you can define the batch job along with the start conditions for that job.
1. Transaction SM36.
2. Give the Z name of the job in the 'Job Name' input field.
3. Click on 'Steps' button from the application toolbar.
4. On the 'Create Step 1' dialog box, give the name of the ABAP program in the 'ABAP Program' section' along with the variant.
5. Click on 'Check Input' button from the dialog box.
6. Click on 'Save' button from the dialog box once the check is successful.
7. One list will be shown. Click on Back button from the standard toolbar.
8. Click on 'Start Conditions' button from the application toolbar. Specify the start condition e.g. immediate. Click on save.
9. The job staus is now scheduled.
10.Click on Save button from the standard toolbar of SM36. The job status will be released.
Using SM37 you can monitor the status of the job.
This will sort out your problem.
PS If the answer solves your query, plz reward points.
Regards -
Problem while running client program in Netbeans4.0
Hi,
I am facing the following problem while running a client program in Nebeans4.0.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7C9012B4
Function=RtlInitAnsiString+0x1B
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:770)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1059)
at java.net.InetAddress.getAllByName0(InetAddress.java:1009)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at weblogic.rjvm.RJVMFinder.getDnsEntries(RJVMFinder.java:370)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:181)
- locked <0x1007ff78> (a weblogic.rjvm.RJVMFinder)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at AcfClient.getHomeRef(AcfClient.java:73)
at AcfClient.forceSession(AcfClient.java:43)
at AcfClient.main(AcfClient.java:34)
Dynamic libraries:
0x00400000 - 0x00406000 C:\Data\j2sdk1.4.2_04\jre\bin\java.exe
0x7C900000 - 0x7C9B0000 C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000 C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000 C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000 C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 C:\Data\j2sdk1.4.2_04\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000 C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000 C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000 C:\WINDOWS\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000 C:\WINDOWS\system32\SYNCOR11.DLL
0x10000000 - 0x10007000 C:\Data\j2sdk1.4.2_04\jre\bin\hpi.dll
0x00390000 - 0x0039E000 C:\Data\j2sdk1.4.2_04\jre\bin\verify.dll
0x003B0000 - 0x003C9000 C:\Data\j2sdk1.4.2_04\jre\bin\java.dll
0x003D0000 - 0x003DD000 C:\Data\j2sdk1.4.2_04\jre\bin\zip.dll
0x02DA0000 - 0x02DAF000 C:\Data\j2sdk1.4.2_04\jre\bin\net.dll
0x71AB0000 - 0x71AC7000 C:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000 C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000 C:\WINDOWS\System32\mswsock.dll
0x76F20000 - 0x76F47000 C:\WINDOWS\system32\DNSAPI.dll
0x76FB0000 - 0x76FB8000 C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000 C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000 C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50D50000 - 0x50D95000 C:\WINDOWS\system32\NETWIN32.DLL
0x50D00000 - 0x50D15000 C:\WINDOWS\system32\CLNWIN32.DLL
0x50DF0000 - 0x50E10000 C:\WINDOWS\system32\LOCWIN32.DLL
0x50DB0000 - 0x50DD9000 C:\WINDOWS\system32\NCPWIN32.dll
0x71AD0000 - 0x71AD9000 C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622C000 C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x1C000000 - 0x1C007000 C:\WINDOWS\system32\NWSRVLOC.dll
0x76C90000 - 0x76CB8000 C:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000 C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C08000 C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000 C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 497K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 89% used [0x10010000, 0x10083158, 0x10090000)
from space 64K, 57% used [0x100a0000, 0x100a9478, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 129K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 9% used [0x104f0000, 0x10510438, 0x10510600, 0x10650000)
compacting perm gen total 4096K, used 2122K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 51% used [0x14010000, 0x14222828, 0x14222a00, 0x14410000)
Local Time = Fri Aug 26 10:26:03 2005
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid1280.log.
# Please refer to the file for further information.
Can anyone pls let me know what could be the problem.
Thanks in adv.Hi,
This type of error
java.lang.NoClassDefFoundError: javax/naming/Context
will occur when the client program could not able to locate lib/j2EE.jar file.
So set the classpath correctly and make sure that you have correctly defined the JAVA_HOME environment variable in .bat script.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer. -
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help
Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed! -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
When downloading Itunes I get this message:
There is a problem with this Windows Installer package a Program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor..
is there a number for me to call or can someone explain what has happen...
Thank you for your help....Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows
Maybe you are looking for
-
When trying to update apps it keeps telling me my account cannot be verified. How do I fix this?
When trying to update my apps it keeps telling me it cannot verify my address! How do I fix this?
-
Is iPod compatible with my computer?
Hi, so I'm going to buy an iPod classic this week. I was looking over the specifications and everything and under Windows operating system it said you need to have service pack 3. I have a Windows XP computer with service pack 2. Does this mean that
-
Safari/Firefox need to Cmd+Q twice to quit.
No big deal, but it's bored. It has been a long time, everytime I quit the Safari or Firefox, few secs later, the icon on the dock jumps again - the browser starts again. And I need to Cmd+Q one more time to quit it. Someone told me to delete the .pl
-
Having trouble booting and general usage
So I've got an intel iMac running Windows 7 Professional and 10.6 The computer will randomly stop working while I'm using either OS, just kind of freeze for a few seconds to minutes and then all of a sudden will act responsive again. So I tried reins
-
Missing services after installing BAM 10.1.3
I have installed BAM 10.1.3 on my laptop under Windows XP. My database is OracleXE. Eveything seemed to have worked. But for some reason I only have one Oracle BAM service (Oracle BAM Enterprise Link Data Flow Service). All the other services are not