Problem in running a program which was runing fine earlier

the error i am getting is...
C:\Documents and Settings\Sumit\Desktop>java ab.SearchFiles
Exception in thread "main" java.io.FileNotFoundException: no segments* file foun
d in org.apache.lucene.store.FSDirectory@C:\Documents and Settings\Sumit\Desktop
\index: files:
        at org.apache.lucene.index.SegmentInfos$FindSegmentsFile.run(SegmentInfo
s.java:516)
        at org.apache.lucene.index.IndexReader.open(IndexReader.java:185)
        at org.apache.lucene.index.IndexReader.open(IndexReader.java:148)
        at ab.SearchFiles.main(SearchFiles.java:97)the program was fine till few minutes ago....i have no idea why it is not running now...please advice me

but earlier it was running .... i do not have any file named segment.....
i cant figure out ..why all of a sudden this error is coming.......

Similar Messages

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

When I connect an external drive I'd like to run a program which is on it. How could I do that?

When I connect an external drive I'd like to run a program which is on it. How could I do that?
I tried automator, but without success.
Thanks

Interesting question. Others have provided the direct answer (no, massive security hole), and a little time with a search engine finds various existing discussions of autorun-related topics (eg: here and here and here), and a link to the Do Something When tool, and there is the DeviceListener example in the Xcode kit and to adding a folder action where the volumes are mounted. See the topics for details. Haven't tried this stuff, though.

HT201210 I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

It may have used the YouTube app that is no longer included in iOS. Try downloading the YouTube app in the App Store and see if it works.

Running the program which saves file in sap directory in background

Hi guys,
how to Run the program which saves file in sap directory in background? Thanks!

Hi Mark,
AL11 is a transaction that shows your application server something like an windows browser.
If you want to store file in your application server then you can write a code which uploads the data in to a file on application server.And you can run your code in background also.
Use function module :SAP_DATA_CONVERT_WRITE_FILE to write file on the application server.
If you want to upload file manually then use TCODE :CG3Z.
Hope this will you out.

Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

I have bought a second hand 3gs on O2 which was working fine and since restoring it (which put ios5 on) it now keeps saying no sim and has searching in the top left corner which then says no service once itunes asks for a sim to be inserted to activate?

I bought an iphone 3gs on o2 which was working fine till i restored it (which put ios5 on to it) now it wont activate, it keeps saying on itunes no sim inserted and on the iphone it has searching then says no service! Any ideas what i can do as cant get any further!

Some SIM cards were affected by iOS updates. Either contact O2 to get a replacement SIM or pop into a local phone shop and pick up a replacement SIM.
Once you have your new SIM, O2 have a swap my SIM page on their web site here:
http://swapmysim.o2.co.uk/
Follow the instructions on the O2 page and you should be up and running.
O2 do say it can take up to 24 hrs for SIM to be active, but I found it usually only takes half an hour or so before the new SIM is active.
Hope this helps.

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. hel

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!

You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/

My mac book pro isn't letting out any sound. i went to the settings and it said that have no output source. it was working fine earlier.

i went to the settings and it said that have no output source. it was working fine earlier.
it says this :

nicolejgoulet wrote:
its fine with the headphones in
Valuable information you add.
This is your problem. The mechanical switch is stuck.. Do you see a red light when you look in there? SOme do some don't.
You need to use the headphone jack several times in and outt with the intention of flipping the switch.
Some use a a non metal piece to flip the switch manually- I would recommend caution here.
Otherwise your best bet
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

I have an IMac desk top. Safari icon is down at the bottom, but nothing happens when I click it. How do I open safari. Was working fine earlier.

I have an IMac desk top. Safari icon is down at the bottom, but nothing happens when I click it. How do I open safari? Was working fine earlier.

You are in the iPad forum.
Open your Applications folder - find Safari in the applications, and double click on the icon in there. You may have a corrupt alias in the dock at the bottom.

Problem with running a program under Labview 8.6

Hello,
I am writing you this to ask for your technical support to fix the problem I am facing at our Lab at University of California, Irvine.
Ms. Vanessa Trujillo has kindly come to our lab a couple of times and tried different things to resolve the issue, but unfortunately the issue is not resolved yet. Here is a summary of the problem:
We used to use Labview 6.1 for our fatigue testing and data acquisition.
Our
program worked just fine under the 6.1 version We recently upgraded our software to Labview 8.6. We have also purchased a new computer that has higher capacity than what your website requires for Labview 8.6. The new computer has Windows Vista We transferred our old program/subprograms from the old computer under Labview
6.1 to the new computer with labview 8.6. However our program that worked fine with the 6.1 version is not working with the updated version (ver 8.6).
There
are 6 errors in the error list. It appears there are six files of my program missing under the new version, even though we transferred all files.
The software searches for those files but can't find them.
        For example one the box pops up indicates:
        loading:
                    <vlib>:\Daq\lvdaq.dll
        searching:
                    C:\Program Files\National Instrument\LabVIEW 8.6\instr.lib\Agilent34401\public\utility
        I get several message like this. I have to cancel/ignore them all to be able to open the program.
When we go to VI's under Measurement I/O there is nothing (empty).
We use a PCI-MIO-16XE-50 for our data acquisition During Labview installation on the new computer, I was asked if I wanted to install the device drivers. I had two options, "Now" or "Later", I picked Now but I didn't have the DVD's/CD's for the device drivers. Therefore I had to select later to complete my software installation Later after Labview 8.6 installation, we installed the device drivers (traditional Ni DAQ and Ni DAQmx) from the two old CD's we had in our lab from a couple of years ago (the CD's were Ni DAQ 7). after installation, the PCI board on the computer was recognized by the device driver. However we still could not run our program under the new version of Labview (same situation and the same messages) I called 1-866-275-6964 on 9/2/08 and talked to Grant (service number:
1228841). He recommended that I download and install the updated version of device drivers.
Since I didn't have the DVD/CD for updated device drivers, I contacted Vanessa Trujillo. She gave me the DVD for the updated Ni DAQ (Traditional and mx).
But
when I tried to install the updated device drivers I got a message something like "some unsupported filed have been detected,..." so the updated device
drivers were not installed. It should be noted that up to here we still had the Ni DAQ (traditional and mx) installed on the computer from our old CD's (Ni DAQ 7).
Vanessa and I talked to Tom at the technical support department. He recommended that we download and install the Beta xx version for Ni DAQ since we were using Windows Vista. Mike put the Beta software on the Ni website/outgoing so I could download and install it. He asked me to uninstall the traditional Ni DAQ that we had on our computer from the older CD's. He
asked me not to un-install the Ni DAQmx (that we had installed from the old
CD). I was able to download the Beta software, however I could not install it since I got a similar message that some unsupported files were detected.
Right now we don't have any version of traditional Ni DAQ installed on the
computer but the NI DAQmx (from old Ni DAQ 7) is still installed on the computer. Vanessa let me borrow her new Ni DAQ DVD but as I explained I am not able to install the device drivers.
Vanessa - Did I miss anything?
Please advise. My cell number is 619-778-2033. I will be at our lab at UC,
Irvine at 2:00pm (CA/Pacific time). Please call if you have any questions.
Thank you

To me, it looks like you are missing some of the drivers and subVI's used in your program.
Whatever device you are using to measure fatigue or any other device probably came with a driver.
You need all of these drivers installed on this new computer.
Also, any subVI's and libraries you use in the program must also be installed on the new computer.
Whenever you get a message that says you are missing some component (the ones that you said you press 'ignore'),
see if you can find that library or subVI on the older computer. If so, save it to something so you can transfer them to the new computer.
Cory K

Problem while running client program in Netbeans4.0

Hi,
I am facing the following problem while running a client program in Nebeans4.0.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7C9012B4
Function=RtlInitAnsiString+0x1B
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:770)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1059)
at java.net.InetAddress.getAllByName0(InetAddress.java:1009)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at weblogic.rjvm.RJVMFinder.getDnsEntries(RJVMFinder.java:370)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:181)
- locked <0x1007ff78> (a weblogic.rjvm.RJVMFinder)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at AcfClient.getHomeRef(AcfClient.java:73)
at AcfClient.forceSession(AcfClient.java:43)
at AcfClient.main(AcfClient.java:34)
Dynamic libraries:
0x00400000 - 0x00406000      C:\Data\j2sdk1.4.2_04\jre\bin\java.exe
0x7C900000 - 0x7C9B0000      C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000      C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000      C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000      C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\Data\j2sdk1.4.2_04\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000      C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000      C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000      C:\WINDOWS\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000      C:\WINDOWS\system32\SYNCOR11.DLL
0x10000000 - 0x10007000      C:\Data\j2sdk1.4.2_04\jre\bin\hpi.dll
0x00390000 - 0x0039E000      C:\Data\j2sdk1.4.2_04\jre\bin\verify.dll
0x003B0000 - 0x003C9000      C:\Data\j2sdk1.4.2_04\jre\bin\java.dll
0x003D0000 - 0x003DD000      C:\Data\j2sdk1.4.2_04\jre\bin\zip.dll
0x02DA0000 - 0x02DAF000      C:\Data\j2sdk1.4.2_04\jre\bin\net.dll
0x71AB0000 - 0x71AC7000      C:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000      C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000      C:\WINDOWS\System32\mswsock.dll
0x76F20000 - 0x76F47000      C:\WINDOWS\system32\DNSAPI.dll
0x76FB0000 - 0x76FB8000      C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000      C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50D50000 - 0x50D95000      C:\WINDOWS\system32\NETWIN32.DLL
0x50D00000 - 0x50D15000      C:\WINDOWS\system32\CLNWIN32.DLL
0x50DF0000 - 0x50E10000      C:\WINDOWS\system32\LOCWIN32.DLL
0x50DB0000 - 0x50DD9000      C:\WINDOWS\system32\NCPWIN32.dll
0x71AD0000 - 0x71AD9000      C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622C000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x1C000000 - 0x1C007000      C:\WINDOWS\system32\NWSRVLOC.dll
0x76C90000 - 0x76CB8000      C:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000      C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C08000      C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 497K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 89% used [0x10010000, 0x10083158, 0x10090000)
from space 64K, 57% used [0x100a0000, 0x100a9478, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 129K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 9% used [0x104f0000, 0x10510438, 0x10510600, 0x10650000)
compacting perm gen total 4096K, used 2122K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 51% used [0x14010000, 0x14222828, 0x14222a00, 0x14410000)
Local Time = Fri Aug 26 10:26:03 2005
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid1280.log.
# Please refer to the file for further information.
Can anyone pls let me know what could be the problem.
Thanks in adv.

Hi,
This type of error
java.lang.NoClassDefFoundError: javax/naming/Context
will occur when the client program could not able to locate lib/j2EE.jar file.
So set the classpath correctly and make sure that you have correctly defined the JAVA_HOME environment variable in .bat script.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

Problems of running java program by crontab in Linux

I have a java application program which runs great when started in command line, or in shell script, or Perl. However, when it is started by crontab in Linux, it stops in the middle when images are to be generated. I guess there might be some settings I need to handle in order to run this java application by crontab. We tried to start the shell script or Perl program in which the java program was invoked, but still didn't work.
This may be a littler stretching. Does anyone have similar experience and success?
Thanks in advance.
ljiang006

Dear dpz,
We have used JComponents. Here's the error message I got. Could you further suggest what to do in my crobtap (which is "11 14 * * * java -classpath /home/VeggieB VHpack.VegHealthFrac" ). Looking forward to your reply. Thanks. ljiang006.
Generate data and image products ...
Save calibrated (unsmoothed) NDVI and T into Product/NDT/
Save initial early products into Product/Initial/
Save temporary products into Product/Tempo/
Save final update products into Product/Final/
Save calibrated (unsmoothed) NDVI and T into: Product/NDT/ Exception in thread "main" java.lang.NoClassDefFoundError
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:130)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
     at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:70)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:130)
     at java.awt.Toolkit$2.run(Toolkit.java:712)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:703)
     at java.awt.Component.getToolkitImpl(Component.java:826)
     at java.awt.Component.getToolkit(Component.java:810)
     at java.awt.Component.createImage(Component.java:2564)
     at VHpack.ImageGenerator.createDataImage(ImageGenerator.java:395)
     at VHpack.ImageGenerator.makeImage(ImageGenerator.java:288)
     at VHpack.ImageGenerator.saveImage(ImageGenerator.java:162)
     at VHpack.LVItoProduct.SaveProduct(LVItoProduct.java:146)
     at VHpack.LVItoProduct.generateProducts(LVItoProduct.java:61)
     at VHpack.NoGuiVeg.<init>(NoGuiVeg.java:94)
     at VHpack.VegHealthFrac.main(VegHealthFrac.java:34)

Error while running Java program which call a file upload servlet

Hi all,
I have a java program which calls a servlet and sends the file to be uploaded by the servlet. I used Jbuilder to create java program and servlet program. I compiled both the programs and compilation suceeded and my class files are avaialbe in
WEB-INF/classes/content directory. But now I am trying to run the Java program(this contains main method) from the command prompt, which should inturn call my servlet.(I have web.xml file inside WEB-INF dir). But I receive the following error
C:\tomcat5.5.15\apache-tomcat-5.5.16\webapps\content\WEB-INF\classes\content>java MultiContentSender
Exception in thread "main" java.lang.NoClassDefFoundError: MultiContentSender (w
rong name: content/MultiContentSender)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
3)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
My dir strcture is as below
TOMCAT_HOME/webapps/content/WEB-INF/classes/content/*.class
I am not able to figure out the error, can anyone throw some light on this issue.

You are trying to invoke the class from the command prompt. My guess is that MultiContentSender contains a package, which means that you'll need to add your WEB-INF\classes directory to the classpath before it will work. Classes stored in this directory are expected to be invoked through tomcat, which builds it's own classpath.

Problems in running SQLJ programs!

Dear SQLJ Support,
I am not able to run SQLJ programs. I am able to compile a .sqlj file.
I tried to compile the demo programs, for example, TestInstallCreateTable.java. I get
"Class oracle.sqlj.runtime.Oracle not found in import" error.
"Class sqlj.runtime.ref.DefaultContext not found in import" error.
When I try to run the other Demo programs also, I am getting errors at places where I import classes from translator.zip. Is there a problem with the JDBC Drivers?
I have set the classpath set to
ORACLE_HOME/sqlj/lib/translator.zip, where the classes are found
ORACLE_HOME/jdbc/lib/classes111.zip, where the JDBC classes are found
JAVA_HOME/lib/classes.zip, where the core java classes are found
I am using Oracle 8.1.6, SQLJ 8.1.6, JDK 1.1.8 on Windows NT 4.0.
Am I missing something else? Kindly advice. Thanks in advance.
Regards,
Radha.

You might wanna try changing the Look and Feel of the swing application. Test it on default, Windows, Mac and Motif interface.... and do post if it works on changing the look and feel.
cheerz

Problem in running a program which was runing fine earlier

Similar Messages

Maybe you are looking for