Problem in screen programming

Hi All,
I have created a PUSH-BUTTON on the screen. On that button I am displaying a ICON by using the ICON NAME (ICON_INSERT_ROW). It is correctly displaying in while logging in with EN language. If I login with PT language it is not displaying the ICON Symbol.
with the same I have created another program and it is showing in both the languages.
Could any body tell me whats the problem.
Thanks,
BSV

Hello
Along with the ICON if your are showing some text also on the push-button,
I suggest create the icon using the FM CREATE_ICON (pls verify FM) than move the created icon to the push-button.
Be sure to translate the icon text (use text symbol).
regards,
A.Singh

Similar Messages

Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
Thanks,
Andy

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I keep getting this message: Adobe Photoshop CC 2014 has stopped working. A problem caused the program to stop working correctly. Then it shuts down the program.

I keep getting this message when I try to open my new Adobe Photoshop. The main screen comes on and a box for the tutorials then this. "Adobe Photoshop CC 2014 has stopped working. A problem caused the program to stop working correctly." When I say Okay to the message, it shuts down the program.

Refer below link once
Photoshop: Basic Troubleshooting steps to fix most issues

Plugging in iPhone 'interrupts' full-screen programs

When I plug in my iPhone to charge, if I'm currently in a full-screen program (i.e., playing World of Warcraft), it causes the program to be interrupted and go to a partial minimization. Is there a way I can get this to stop? Thanks.

I just started getting this same problem in IOS 7.1, never had a problem till before IOS7.1 When it gets to step 6 or 7 it will turn to a blue screen and restart with a message on my Mac that says "iphone can not be detected" or something like that.
Anyine got any fixes for it?

Problem in Screen Exit

Hi all,
I have a problem in Screen Exit. My requirement is to create one new field in ME21N transaction code, I did that using screen exit, which offers me a tab of Customer Data. That is working fine. My problem here is when the user enters the value in that(costcenter) field tax jurisdication code should populate automatically for the particular entry. I used user exit for this purpose to update taxjurcode field in the table. But after the user exit execution the rest of the program code executes and it updates the EKPO table which over writes the entries which i was updating using my user exit code. How can i get rid off this problem. Please throw some light on that. Thanks.

You are right. My user exit is also triggering that place only for the ME22n and ME23n...........it is strange for me as it is not working for ME21n. Which is not updating with the statements that i provided in User exits.
When i am debugging the program after the user exit it is taking me to some std program where the entries were overwritten. That is where i face the problem.
Any suggestions.

Problems using the Program Monitor

Dear Premiere users,
I recently bought Adobe Premiere CS3 and i'm having problems using the Program Monitor.
I cant see anything off screen. It just wont show anything if its outside the boundaries of the screen. I can adjust the zoom level but that wont change anything even if i set it to full screen.
Another problem I'm having is that it wont show motion paths or clip handles. Even if I make a motion path in the Effects Control window it wont show the path in the Program Monitor.
I really appreciate any advice on this because it drives me crazy. I already tried installing it again but that wont solve the problem.
Thanks in advance.
Greetings,
Peter

First of all I hope you are being sarcastic Jim. Sorry for being not that clear but I'm not stupid :).
Craig Howard is right. I thought that the Program Monitor was similarly to AEFX. But I suppose I was wrong on this one? So you cant get something to display outside the image area? If I place a clip outside the project dimension it just disappears in the Program Monitor.
And about the motion paths. I thought I read in the Premiere help files that they do show up in the Program Monitor. The topic says: "Adjust position, scale, and rotation" or "Animate motion in the Program Monitor ". There are pictures over there that show clip handles and motion paths in the Program Monitor. Clicking the effect wont do anything for me. Its like my video driver cant get them to show or something.
Edit: I found a tutorial here:
http://digitalproducer.digitalmedianet.com/articles/viewarticle.jsp?id=26660&afterinter=tr ue
They are dragging frames off screen and are using the handles and borders around the frame to adjust them. So I guess it should be possible, but how?
Thanks for the help.

Crystal Report Intigration using screen programming

I am having 2 problems regarding crystal report.
1) I have developed crystal report using crystal report wizard for table 'MARA'
now i want to call this crystal report using screen programming. How i can do this.
2) and how i can call parameterised crystal report using abap programming.
can any one help me ?
Thanks.

hi,
this is code for open the crystal report press the button.
First import the crystal report using Report and layout manager
goto administration->setup->general--->Report and layout manager
create one button in add-on form.when we press the button the following event triggered.
get the docnumber for that particular form and pass it.
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
                        If pVal.ItemUID = "btnPrint" Then
                            Dim strAcNcmr As Integer
                            strAcNcmr = objForm.Items.Item("txtDocNo").Specific.Value
                            Dim oRS As SAPbobsCOM.Recordset
                            oRS = objSBOAPI.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                            oRS.DoQuery("SELECT MenuUID FROM OCMN WHERE Name = ' Purchase Indend' AND Type = 'C'")
                            objSBOAPI.SBO_Appln.ActivateMenuItem(oRS.Fields.Item(0).Value.ToString())
                            Dim oForm1 As SAPbouiCOM.Form
                            oForm1 = objSBOAPI.SBO_Appln.Forms.ActiveForm
                            oForm1.Items.Item("1000003").Specific.String = strAcNcmr
                            oForm1.Items.Item("1").Click()
                            oForm1.Items.Item("1").Visible = False
                            oForm1.Items.Item("2").Click()
                        End If
this is easy solution for open the crystal report for add-on form
Thanks & regards
B.lakshmi narayanan

Problem with various programs freezing/not working

I'm not sure if it's a problem with the computer itself or with the software, but perhaps someone on here can help me.
For about a week now I've been having problems with various programs on my iMac. These programs include iTunes, Force Quit, Shut Down, Safari, Finder, and certain functions on the keyboard.
The problems I've been having revolve around the programs freezing up when you either first try to operate them or after opening the programs and trying to click on things within the program itself.
A good example: I haven't been able to use iTunes past the point of opening it up. Once I try to play a song, it freezes up and the rainbow wheel comes up and just keeps on spinning for eternity, or until I manually reboot the computer via the power button.
The volume controls on the keyboard don't work at all. When I first boot up the computer, I can press a volume button and the symbol will appear on the screen, but the level won't move up or down and if you press it again after that disappears then it doesn't reappear.
Force Quit and other applications tend to stay on the screen after you click the quit button or other end/cancel button and won't go away until iMac is rebooted manually by button on back.
Safari gets stuck on occasion depending on which site I go to. It happened once when I went to MySpace.com, but only cos of one of the flash sites they were advertising. I went to the same site an hour later and it was fine since it was advertising something else. I have a job site I can't access because when I click on the 'jobs' link to look for a job, it gets 3/4 of the way through the upload and freezes.
And right now I can't tell you which model I have since I can't access the 'About This Mac' info, other than to tell you it's the 20" with 320 GB with Leopard software, Mac OS X v10.5. It gets regular updates.
So... if there's anyone who could help me, I would greatly appreciate it.
Please note, I don't have Apple Care since I can't afford it yet, and I just bought my computer in October 2007. Thanks!

Start with http://www.thexlab.com/faqs/multipleappsquit.html

I have a problem with the program Lightroom on Mac

Hello!
I have a problem with the program Lightroom on Mac
Today set a new Lightroom CC 2015 through Creative Cloud but it does not run , I do not know what is the reason
Please help resolve this issue as soon as possible , I can not continue its work
Thank you for attention

Hi Musik
Take a look at this link and see if it helps:
Lightroom doesn't launch or quits automatically after splash screen
Pattie

Satellite A - Problem with screen minimizing

Good morning.
Has anyone encountered the problem of screen minimizing, of having an open screen and clicking on the down screen arrow and instead the program minimizes.
When opening an internet site having it open already minimized, or it opening in full screen and then minimizing for no reason.
Is there a fix for this problem? Any answers or solutions would be appreciated.
Thank you.

hi SAVAGE,
if you minimize the screen do you mean it changes from 17" to 15"...?
i am kidding - of course.
some more info were needed: which browser, version, is there a special website wich causes this problem?
if there is javascript on this websites it could be possible that they are opening when loaded even when the browser is minimized
after loading the webpage the browser take back control and minimizes the window
upgrade/update your browser and the java environment.

Photoshop CC 2014, A problem caused the program to stop working

When opening Photoshop CC 2014, I get "A problem caused the program to stop working correctly". Works fine on my home computer but the new one in the office has the error message. I have the latest cloud version of the program. I've updated the AMD/ATI display driver- first from the HP site supporting the Win 7 Pro laptop I'm working on(driver ver.13.2) and then from the AMD site (ver.14.1) I've installed all windows updates. Still get the same message followed by Photoshop closing itself out.
Has windows ever notified anyone of a solution

I think once Windows notified me of a solution (which was to update my video card driver). Most of the time you don't get a direct response, but submitting the report does give the engineers something to work with in order to try to find out what is causing the problem.
Anyway, there are about a million different things that can cause any application to return this generic error message. While you've already covered a couple of the possible solutions, there is still a ton of stuff to try. Since Photoshop is working on one computer but not the other, and knowing that Photoshop is exactly the same between both computers (assuming you are using the same version), then the question really becomes "what is different between the two computers?" Basically, shy of knowing that, we have a ton of general troubleshooting steps to give a shot at:
Troubleshoot system errors, freezes | Windows | Adobe software

Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

I can't open Itunes on my laptop. "Itunes has stopped working. A problem causes the program to stop working correctly. windows will close the program and notify you if a solution is available" is the message. what is the problem here?

I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot the machine, Uninstall and re install the Itune program, stilll the same message pops up.

The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file.

Problem in screen programming

Similar Messages

Maybe you are looking for