Problem in script/ response immedtely

Hi experts,
The custom print program printing the billing document.
Layout also custom layout.
In driver program, values coming 188750.00 for one amount filed.( right format).
but i saw 188.750,00 value in script debugg mode( wrong format) & output of the form.
what is problem of this.
please explain clearly.
this is very urgent requirment.
waiting for your valuable responses.
Regards
jai

hi,
Check out System->User Profile->Own Data->Default->Decimal Notation.
Change the notation as per your requirement.
You can also check this in table USR03. In this table you will find decimal notation. Decimal notation is configured for each user and can be different for different users. If you cannot change this notation. Then you have to write the data on the script using EDIT MASK.
Hope this helps.
Regards,
Richa

Similar Messages

Problem in script format

hi,
i am having problem in script , the problem is
s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
01     aaaaaaaaaaaaaaaaaaaaa       11.01                             17.28                     170000000               2400000
this is fine but when the 1st column is shot other also get affected.
s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
01     aa       11.01                             17.28                     170000000               2400000
and i cannot draw vertical line here .what is the solution for this.
Edited by: jaihind on Mar 6, 2010 12:21 PM
hi,
problem is if the description field is long then other coloum are comming fine but if description caloumn is small then other also get affected and its comes towards left .
Edited by: jaihind on Mar 6, 2010 12:22 PM

Hi
For this u can resolve by using the Formatting characters ......
This is your layout ..
s.no| descriptio | UOM | Qty | Rate | AMT |
01 aaaaaaaaaaaaaaaaaaaaa 11.01 17.28 170000000 2400000
Assume that   your field names like
s.no      | description |    UOM      |    Qty      |      Rate      |         AMT       |
&sno&      &desc&         &UOM&       &Qty&         &rate&         &AMT&
asseme that length of these fields(in characters) as per your requirement will be ...
s.no      | description |    UOM      |    Qty      |      Rate      |         AMT       |
8                  15                  5                8                 10                  15
For these use formatting characters    like   ...
              s.no      | description      |    UOM      |    Qty      |      Rate      |         AMT       |
1stLine &sno& ,, &desc+0(15)&,, &UOM&       &Qty&        &rate&         &AMT&
2ndline                 &desc+15(15)&
&desc+0(15)& - it will print first 15 characters from 0th position
&desc+15(15)&- From 15th position it will print 15 characters ..
Hope you resolve your issue
Let me know if Any concerns,.......

Com.sap.caf.mp.base.exception.EngineException: Problem in server response:

Hi,
I have created one CAF application,which is having one external webservice and one application service.Webservice takes two input parameters(string,boolean) and it returns an arraylist.
So when i test the CAF application on the CAF service browser it is giving me error like " com.sap.caf.mp.base.exception.EngineException: Problem in server response: [Bad Request]."
I am getting this error while creating object of web service.
Can anybody help me on this issue..
Thanks in Advance

It looks like you are not authorized to execute the webservice. Check the webservice authentication settings.
Peter

Priniting problem in script

Hi friends,
i am facing a problem in script. i have developed the form
and it is working fine .in print preview every thing seems to be ok.
when we try to take a print the right side characters are cutting down by 2
characters every time.
i have moved the content to left but the result is the same.
can any one tell me how to solve the issue.
Regards,
Srinivas

Hi,
Try to check the lenght of the field/var that you are printing.
change the alignment doesnt solve the problem.
Check in your code what is the lenght and if is the same in your form.
Sample:
&j_1bprnfli-cfop(4C)&
prints only 4 digits of the variable j_1bprnfli-cfop.
Regards.
Rodrigo Paisante

Problem in script printing

Hi Guru's
I have a problem in script printing.
The quantity and netprice are printing incorrectly. i.e., quantity should print as 1.000 where as it is printing as 1,000 and net price is printing as 5,30 instead of 5.30.
I have checked in the owndata settings it is like 1,234,56.00.
I would like to know whether any settings will be there or i need to do any modificatione
Waiting for you reply.

Hi!
Here you can find the SAPScript formatting options.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/803411454211d189710000e8322d00/content.htm
If it is not good for you, you might code it in your printer program and put it into a character variable.
Regards
Tamá

Lately and i dont know why i see a pop up about a problem with script. can some1 help me?

there is a pop up about a problem with script. it ask me end and contuniue the script. i didnt have that problem before. plz help me it gets really irritating. it asks a lot

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Problem deserializing error response in BPEL Custom Worklist

Hi ,
I have developed a BPEL custom worklist application using the 11G worklist API.
Everything is working fine for me if I deploy my application in Tomcat 6.0
However , if I deploy my application on WebLogic 10x and if any of the API methods get a exception ,
I am not able to get the exact Exception . It gives me error like
**java.rmi.UnmarshalException: Problem deserializing error response; nested exception is:**
**java.io.InvalidClassException: oracle.xml.parser.v2.XMLNode; local class incompatible: stream classdesc**
**serialVersionUID = -9017926583992508837, local class serialVersionUID = 5247237047346331071**
I am facing this problem only in Weblogic.
Jars included in my Application WEB-INF/lib are
wlfullclient.jar
xml.jar
wsclient.jar
orasaaj.jar
orabpel-common.jar
orabpel.jar
xmlparserv2.jar
soa-infra-mgmt.jar
oracle-soa-client-api.jar
orabpel-thirdparty.jar
jazncore.jar
fabric-common.jar
wlclient.jar
bpm-services.jar
bpm-infra.jar
ejb.jar
Entire exception is as follows :
oracle.bpel.services.workflow.client.WorkflowServiceClientException: java.rmi.UnmarshalException: Problem deserializing error response; nested exception is:
     java.io.InvalidClassException: oracle.xml.parser.v2.XMLNode; local class incompatible: stream classdesc serialVersionUID = -9017926583992508837, local class serialVersionUID = 5247237047346331071
     at oracle.bpel.services.workflow.task.client.TaskServiceRemoteClient.acquireTask(TaskServiceRemoteClient.java:1580)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.bpel.services.workflow.client.WFClientRetryInvocationHandler.invokeTarget(WFClientRetryInvocationHandler.java:130)
     at oracle.bpel.services.workflow.client.WFClientRetryInvocationHandler.invoke(WFClientRetryInvocationHandler.java:69)
     at $Proxy109.acquireTask(Unknown Source)
     at com.fss.maps.merchantsales.service.referraldetails.ReferralBeanDetServiceImp$2.doInTransaction(ReferralBeanDetServiceImp.java:193)
     at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
     at com.fss.maps.merchantsales.service.referraldetails.ReferralBeanDetServiceImp.updateReferralMast(ReferralBeanDetServiceImp.java:136)
     at com.fss.maps.merchantsales.action.referraldetails.ReferralBeanAction.updateReferralDetails(ReferralBeanAction.java:704)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.opensymphony.xwork2.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:440)
     at com.opensymphony.xwork2.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:279)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:242)
     at com.opensymphony.xwork2.interceptor.I18nInterceptor.intercept(I18nInterceptor.java:148)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:163)
     at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:87)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:249)
     at org.apache.struts2.interceptor.validation.AnnotationValidationInterceptor.doIntercept(AnnotationValidationInterceptor.java:68)
     at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:87)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ConversionErrorInterceptor.intercept(ConversionErrorInterceptor.java:122)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ParametersInterceptor.doIntercept(ParametersInterceptor.java:195)
     at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:87)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ParametersInterceptor.doIntercept(ParametersInterceptor.java:195)
     at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:87)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.StaticParametersInterceptor.intercept(StaticParametersInterceptor.java:148)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.interceptor.CheckboxInterceptor.intercept(CheckboxInterceptor.java:93)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.interceptor.FileUploadInterceptor.intercept(FileUploadInterceptor.java:235)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ModelDrivenInterceptor.intercept(ModelDrivenInterceptor.java:89)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ScopedModelDrivenInterceptor.intercept(ScopedModelDrivenInterceptor.java:128)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.interceptor.ProfilingActivationInterceptor.intercept(ProfilingActivationInterceptor.java:104)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.interceptor.debugging.DebuggingInterceptor.intercept(DebuggingInterceptor.java:267)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ChainingInterceptor.intercept(ChainingInterceptor.java:126)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.PrepareInterceptor.doIntercept(PrepareInterceptor.java:138)
     at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:87)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.I18nInterceptor.intercept(I18nInterceptor.java:148)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.interceptor.ServletConfigInterceptor.intercept(ServletConfigInterceptor.java:164)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.AliasInterceptor.intercept(AliasInterceptor.java:128)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at com.opensymphony.xwork2.interceptor.ExceptionMappingInterceptor.intercept(ExceptionMappingInterceptor.java:176)
     at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:236)
     at org.apache.struts2.impl.StrutsActionProxy.execute(StrutsActionProxy.java:52)
     at org.apache.struts2.dispatcher.Dispatcher.serviceAction(Dispatcher.java:468)
     at org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:395)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:265)
     at org.acegisecurity.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:107)
     at org.acegisecurity.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:72)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.ui.ExceptionTranslationFilter.doFilter(ExceptionTranslationFilter.java:166)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.wrapper.SecurityContextHolderAwareRequestFilter.doFilter(SecurityContextHolderAwareRequestFilter.java:81)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.ui.logout.LogoutFilter.doFilter(LogoutFilter.java:110)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.context.HttpSessionContextIntegrationFilter.doFilter(HttpSessionContextIntegrationFilter.java:249)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.concurrent.ConcurrentSessionFilter.doFilter(ConcurrentSessionFilter.java:95)
     at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:275)
     at org.acegisecurity.util.FilterChainProxy.doFilter(FilterChainProxy.java:149)
     at org.acegisecurity.util.FilterToBeanProxy.doFilter(FilterToBeanProxy.java:98)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.displaytag.filter.ResponseOverrideFilter.doFilter(ResponseOverrideFilter.java:125)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.fss.maps.common.util.HighRiskTransactionFilter.doFilter(HighRiskTransactionFilter.java:90)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.rmi.UnmarshalException: Problem deserializing error response; nested exception is:
     java.io.InvalidClassException: oracle.xml.parser.v2.XMLNode; local class incompatible: stream classdesc serialVersionUID = -9017926583992508837, local class serialVersionUID = 5247237047346331071
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl_1033_WLStub.acquireTask(Unknown Source)
     at oracle.bpel.services.workflow.task.client.TaskServiceRemoteClient.acquireTask(TaskServiceRemoteClient.java:1574)
     ... 97 more
Caused by: java.io.InvalidClassException: oracle.xml.parser.v2.XMLNode; local class incompatible: stream classdesc serialVersionUID = -9017926583992508837, local class serialVersionUID = 5247237047346331071
     at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:562)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1583)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1583)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1583)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at java.util.HashMap.readObject(HashMap.java:1030)
     at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:197)
     at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:564)
     at weblogic.rjvm.ResponseImpl.getThrowable(ResponseImpl.java:190)
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:232)
Please help if u have come acrross some error like this ..............

Hi,
I'm facing the same issue with SOA Suite 11.1.1.3 with weblogic 10.3.3.0.
I get the following exception:
Error occurred while updating task outcome. java.rmi.UnmarshalException: cannot unmarshaling return; nested exception is:
java.io.InvalidClassException: oracle.bpel.services.workflow.task.model.CustomTaskTypeImpl; local class incompatible: stream classdesc serialVersionUID = -5471687046445499096, local class serialVersionUID = -1564179312380198686
this was working fine with SOA Suite 11.1.1.1.
Please let me know if you guys have found the solution.
Thanks,
Makrand

Problem with socket responses with flex

Hi, I am using the code below to connect to an IMAP server.
When I telnet to the server and use the commands that I am sending in the code, the rsponses are correct.
However, when I run the code below, I only obtain the ready and logged in responses as shown below.
Any ideas why I am not receiving the full set of responses from the socket?
Thanks in advance fro your advice.
The following is the output from the code:
+++++++++++++++++ START SENDING IMAP DATA +++++++++++++++++++++++++
sent: . login user1 myPassword
sent: . status INBOX (messages)
sent: . select INBOX
+++++++++++++++++ END SENDING IMAP DATA +++++++++++++++++++++++++
++++++++ [IMAP START]
Response is: * OK Dovecot ready.
[IMAP END] +++++++++
++++++++ [IMAP START]
Response is: . OK Logged in.
[IMAP END] +++++++++
The code is:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
   xmlns:s="library://ns.adobe.com/flex/spark"
   xmlns:mx="library://ns.adobe.com/flex/mx"
   applicationComplete="init()">
<fx:Declarations>

</fx:Declarations>
<fx:Script>
<![CDATA[
public var dataStr:String;
private var socket:Socket;
private var serverURL:String= "dead.org";
private var serverPort:int = 143;
private var serverResponse:ByteArray = new ByteArray();
private function init():void
this.serverURL = serverURL;
this.serverPort = serverPort;
socket = new Socket();
socket.addEventListener(ProgressEvent.SOCKET_DATA,handleNewIMAPData); //Event when socket receives new data
this.connectToServer();
sendIMAPdata();
private function sendString(dataStr:String):void
var bytes:ByteArray = new ByteArray();
bytes.writeMultiByte(dataStr, "UTF-8");
socket.writeBytes(bytes);
socket.flush();
trace("sent: " + dataStr);
public function sendIMAPdata():void
trace("\t +++++++++++++++++ START SENDING IMAP DATA +++++++++++++++++++++++++");
dataStr =". login user1 myPassword" + "\r\n";
sendString(dataStr);
dataStr =". status INBOX (messages)" + "\r\n";
sendString(dataStr);
dataStr =". select INBOX" + "\r\n";
      sendString(dataStr);
trace("\t +++++++++++++++++ END SENDING IMAP DATA +++++++++++++++++++++++++");
private function handleNewIMAPData(event:ProgressEvent):void
var numBytes:int = socket.bytesAvailable;
serverResponse = new ByteArray();
while(socket.bytesAvailable)
    var byte:int = socket.readUnsignedByte();
serverResponse.writeByte(byte);
var response:String = serverResponse.toString();
trace(" ++++++++ [IMAP START]\n Response is: " + response + "[IMAP END] +++++++++\n");
private function connectToServer():void
socket.connect(serverURL, serverPort);
]]>
</fx:Script>
</s:WindowedApplication>

When I run telnet, the console responses are the same as the tcpdump messages.
When I run the program, the messages from tcpdump match the messages in my trace statements.
The messages from telnet and running the program are different:-)
I can only assume (at the moment) that I am sending multiple messages too quickly(?), but I did a quick and dirty big "for loop" to slow down the sending of subsequent messages, but with no resulting change in the programs behaviour.
So, still thinking about the problem - unfortunately.

How to solve UDDI problem? : Unsupported response

I have problem with UDDI
I cann't to connect to any UDDI such as Oracle UDDI, IBM UDDI, Microsoft UDDI.
When I test the connection it show me :
Testing connection with no proxy...
Contacting http://otn.oracle.com/uddiapi/inquiry...
Unsupported response content type "text/html", must be: "text/xml". Response was:
<html>
<head>
<title>Error Page 404</title>
<link rel="stylesheet" href="http://www.oracle.com/admin/oracle.css" type="text/css">
<script language=Javascript src="http://www.oracle.com/admin/jscripts/portal_lib.js"></script>
<script language=Javascript src="http://www.oracle.com/admin/jscripts/lib.js"></script>
<script type="text/javascript">
function cleartext()
document.queryForm.keyword.value = "";
/********* INSERT THE DOMAIN AND PATH TO YOUR CODE BELOW ************///--></script><script language="JavaScript" src="http://www.oracle.com/admin/jscripts/s_code_remote.js"></script> </td> <TD WIDTH="10"><IMG SRC="http://oracleimg.com/admin/images/ocom/hp_spacer.gif" BORDER=0 ALT="" WIDTH="10"></TD>
</tr>
</table>
</body>
</html>
The inquiry endpoint could not be contacted. Test failed.
How to solve this problem?
Thank you every guru. ^___^

the predefined UDDI Registry connections are taken off as IBM and Microsoft UDDI Registry connections are no longer supported. Theres only one regitry availble (Xmethods Public UDDI Registry http://uddi.xmethods.com/inquire
It appears you have tried to test a connection with no proxy selected. You need to enable the proxy preference to make it working.
Regards,
Sunil..

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Mapping problem in message response RFC -- xi -- JDBC

Hi all,
I'm using the follow scenario:
RFC <-> xi <-> JDBC
It's a synchronous interface.
In JDBC the message do a SELECT in database and returns selected rows in message response.
The message response transfers selected rows to RFC.response in the mapping.
It seems working right but no data are transfered to RFC.
In SXMB_MONI I can see the selected rows from database.
There is no error in JDBC and RFC adapter. Bellow is the message response in the SXMB_MONI:
<ns1:MT_jbdc_select_response xmlns:ns1="http://braskem.com.br/xi/sapxi03">
<t7_productionorder_response>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
</t7_productionorder_response>
</ns1:MT_jbdc_select_response>
I think that there is an error in message mapping between RFC.response <-- message_response, because I'm just mapping the fields <row> and <product>, because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.
Bellow the structure of MESSAGE RESPONSE:
   <t7_productionorder_response>
      <row>
         <PRODUCT/>
      </row>
   </t7_productionorder_response>
Bellow the structure of RFC RESPONSE:
<RFC.response>
<t_return>
     <item>
         <product/>
     </item>
</return>
</RFC.response>
When I make a link in the mapping between
<t7_productionorder_response> -> <t_return>
a short DUMP happens in RFC call in R/3.
Anyone could help me about this problem ?
Thanks in advance
Regis Ferrato

Hi,
<i>because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.</i>
After doing this mapping, did you test it in the IR mapping editor? was it successful?
Do specify the occurence of all the headers so we can help you better.
Regards,
Smitha.

Page problem in script

Hi,
I have one more problem. Actually my script having only one page output. But in second page also logo is printing.
I don't want second page. In first page I have only two windows main & logo.
Could you please suggest me how to do it.

Hi!
You have to set up 2 pages in SE71, FIRST, and NEXT.
FIRST has to contain the LOGO and MAIN windows.
NEXT has to contain only the MAIN window.
At the FIRST page you have to set the next page as NEXT page.
At the NEXT page you have to set the next page as NEXT page (same as FIRST).
This makes your NEXT sides not to print the logo and handles accidentally data overflow to your second page.
Check out if there is an explicit /: NEW-PAGE in your sapscript, this causes problems also.
Regards
Tamás
Message was edited by:
Tamás Nyisztor

Problem with interspersed response -- opening vertical space fail

mail.app version 5.3 (1283) on MacOS 10.7.5
I can top- or bottom- post and do so when appropriate, generally in very simple email conversations.
BUT, for more complex threads, I commonly want to open some space between each paragraph of each incoming message to insert my response. (Incoming paragraphs are typicallly separated by a blank line or two.) Mail.app provides horizontal bar quoting indicators at the left to mark the progress of the thread over many exchanges, though this mechanism often seems not to be very well supported by the email clients of my correspondents. (I often end up increasing the quoting manually to restore a semblance of the correct quoting of a thread. Oh, well...)
I've been using mail.app only since I installed 10.7, shortly after it was released. With varying success, especially when using formatted as opposed to plain text. Exchanges with some people work more or less flawlessly.   The most common difficulty: I have trouble opening up vertical space below an incoming, quoted paragraph in which to type my response to that para. Up until today, I've always been able to find a way, by exeriment of where I put the cursor, using shift-enter instead of enter, etc, etc.
But for a message I just received, I cannot. Every attempt I make to open some vertical space results in ... trouble. If I put the cursor on a blank line between incoming paragraphs and command "decrease quote level" I get 8 inches [!] or so of quoted vertical space, followed by 8 more inches or so of unquoted vertical space, followed by the following paragraph and the rest of the thread, apparently intact. That's not right!
Fortunately, I can undo and resume ... to do what? I get a similar result if I try placing the cursor that line and hit "enter". Or "Enter". Or "shift-enter".
Yeah, it looks like I've opened 10 inches in which to insert my response to the first paragraph, but first I need to get rid of most of the inserted quoted vertical space -- an impossible task, as far as I can see. If I put the cursor on the first line of unquoted space and backspace, the 10 quoted inches stay the same and characters delete from the end of the previous quoted parag.
What's going on?   Are there any methods of recovering some semblance of normal operation so I can answer this incoming message? (OK, I've given up and responded by top-posting.)   I note that I can view the source of the incoming message, but I see no way to view the source of the response, to see what exactly is going on. What is actually being inserted in the formatted text source that creates the mess I observe?
In this case, viewing the incoming source seems to reveal only one apparent client name: Zimbra.   Is that a client? Could Zimbra and mail.app have ... issues with each other?
Are there any mail.app add-ins that might help?   Work-arounds?   (Yeah, probably converting to plain text would solve the problem, but that has other issues.)   Any applicable help or articles?
Am I missing anything incredibly obvious?
TIA

mail.app version 5.3 (1283) on MacOS 10.7.5
I can top- or bottom- post and do so when appropriate, generally in very simple email conversations.
BUT, for more complex threads, I commonly want to open some space between each paragraph of each incoming message to insert my response. (Incoming paragraphs are typicallly separated by a blank line or two.) Mail.app provides horizontal bar quoting indicators at the left to mark the progress of the thread over many exchanges, though this mechanism often seems not to be very well supported by the email clients of my correspondents. (I often end up increasing the quoting manually to restore a semblance of the correct quoting of a thread. Oh, well...)
I've been using mail.app only since I installed 10.7, shortly after it was released. With varying success, especially when using formatted as opposed to plain text. Exchanges with some people work more or less flawlessly.   The most common difficulty: I have trouble opening up vertical space below an incoming, quoted paragraph in which to type my response to that para. Up until today, I've always been able to find a way, by exeriment of where I put the cursor, using shift-enter instead of enter, etc, etc.
But for a message I just received, I cannot. Every attempt I make to open some vertical space results in ... trouble. If I put the cursor on a blank line between incoming paragraphs and command "decrease quote level" I get 8 inches [!] or so of quoted vertical space, followed by 8 more inches or so of unquoted vertical space, followed by the following paragraph and the rest of the thread, apparently intact. That's not right!
Fortunately, I can undo and resume ... to do what? I get a similar result if I try placing the cursor that line and hit "enter". Or "Enter". Or "shift-enter".
Yeah, it looks like I've opened 10 inches in which to insert my response to the first paragraph, but first I need to get rid of most of the inserted quoted vertical space -- an impossible task, as far as I can see. If I put the cursor on the first line of unquoted space and backspace, the 10 quoted inches stay the same and characters delete from the end of the previous quoted parag.
What's going on?   Are there any methods of recovering some semblance of normal operation so I can answer this incoming message? (OK, I've given up and responded by top-posting.)   I note that I can view the source of the incoming message, but I see no way to view the source of the response, to see what exactly is going on. What is actually being inserted in the formatted text source that creates the mess I observe?
In this case, viewing the incoming source seems to reveal only one apparent client name: Zimbra.   Is that a client? Could Zimbra and mail.app have ... issues with each other?
Are there any mail.app add-ins that might help?   Work-arounds?   (Yeah, probably converting to plain text would solve the problem, but that has other issues.)   Any applicable help or articles?
Am I missing anything incredibly obvious?
TIA

Synchronous RFC -- SOAP Scenario: problem with SOAP Response/Fault Mapping

Hi,
I've a synchronous RFC --> PI --> SOAP Scenario. The problem is that the message structure of the sending RFC doesn't match the Webservice Structure.
The (SAP standard) RFC has just a Request / Response message structure. Part of the Response Message structure is a exception structure.
The Webservice has a Request / Response message structure and in case of an error I get a SOAP:Fault.
Problem now is that I cannot configure that scenario without usage of BPM as I will have to map SOAP:Response or SOAP:Fault to the RFC Response structure.
Has anybody another idea to do that synchronous scenario (with usage of message mapping) without BPM?
BR
Holger

1)
you maus define 3 mapping.
1)request
2)response
3)Fault
in Interface mapping define at response boths (2-3) mapping. its clear??
2)
otherwise sometjhing is not clear, why do you want fault?? why dont you get only response message. we implement this kind of response:
<response_MT>
<ID> (error ID)
<system> (target system)
<error> (Error Description)
</response>
by this way fault message is not needed. but if you must have it just follow the top of message else, propose second.
Thanks
Rodrigo
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 25, 2008 11:52 AM

Xsl/stylesheet transformation problem in soap response(usinf xmlx-tags.tld)

Hi,
I have problem in transforming the soap response using xmlx-tags.tld.....
I was not able to read the <EmpName> value from the returned xml...
The stylesheet / xsl does not return any elements if I use other then "/" in match
attribute : <xsl:template match="/">
here is my soap call and stylesheet in JSP:
<x:xslt media="html">
<x:xml>
<ws:soap ttl="360000">
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
... making soap call here...
</soap:Body>
</soap:Envelope>
</ws:soap>
</x:xml>
<x:stylesheet media="html">
<xsl:stylesheet version='1.0' xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
<xsl:output method="xmll" omit-xml-declaration="no"
doctype-public="-//W3C//DTD HTML 4.0 Transitional//EN" indent="yes" />
<xsl:template match="GetEmpResult">
<html>
<body>
Result: <B>Symbol <xsl:value-of select="EmpName"/></B>
</body
</html>
</xsl:stylesheet>
</x:stylesheet>
</x:xslt>
the SOAP response looks like this:
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<GetEmpResponse xmlns="http://ws.cdyne.com/">
<GetEmpResult>
<EmpID>string</EmpID>
<EmpName>string</EmpName>
<SalAmount>decimal</SalAmount>
<Error>boolean</Error>
</GetEmpResult>
</GetEmpResponse>
</soap:Body>
</soap:Envelope>
I tried all the possibilities of template matches, but not succeeded....
Can somebody help me the correct <xsl:template> to access EmpName from the above
SOAP responses...
regards
Vijay

Hi,
Dynamic xslt are not quite supported in OSB, there are some approaches that may be helpful for your case though...
Have a look at these...
http://atheek.wordpress.com/2011/12/21/using-xalanevaluate-to-parametrize-xpath/
http://beatechnologies.wordpress.com/2010/12/01/dynamic-xquery-in-oracle-service-bus/
Let me know how you go...
Cheers,
Vlad

Problem in script/ response immedtely

Similar Messages

Maybe you are looking for