Problem in script printing

Hi Guru's
I have a problem in script printing.
The quantity and netprice are printing incorrectly. i.e., quantity should print as 1.000 where as it is printing as 1,000 and net price is printing as 5,30 instead of 5.30.
I have checked in the owndata settings it is like 1,234,56.00.
I would like to know whether any settings will be there or i need to do any modificatione
Waiting for you reply.

Hi!
Here you can find the SAPScript formatting options.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/803411454211d189710000e8322d00/content.htm
If it is not good for you, you might code it in your printer program and put it into a character variable.
Regards
Tamá

Similar Messages

Problem with Script Alignment for new printer

Hi All,
I'm printing SAP checks to LOCAL printer. Currently we are using Dell W5300n to print checks and the printer has a lot of maintenance problems. Therefore we purchase a new printer Dell 3110cn and would like to have it set up to print checks. We would still keep old printer ( Dell W5300n ) for back up.We changed the printer to new as there is some problem with old printer.
Problem is , if we print a check from using old printer, the check alignment is good. But if we print a check from new printer, the check alignment is off.
I'm using DINA4 Page format.
Can you please tell me what is the problem here?
Thanks,
Subha

Hi Subhashini Kuntala,
For your issue there are few things to check ...
1. We need to find exact Printer (new) drivers which matches exactly the (old) Printer.
2. Is your cheque is in A4 size or Customised size.
3. If it is A4 try to print in Other Printer.
If these senerio's does't work, as a ABAPer You can't do anything else .. So, best to pass this issue to BASIS.
That could resolve your Problem.
Regards,
sg

Problem in script format

hi,
i am having problem in script , the problem is
s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
01     aaaaaaaaaaaaaaaaaaaaa       11.01                             17.28                     170000000               2400000
this is fine but when the 1st column is shot other also get affected.
s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
01     aa       11.01                             17.28                     170000000               2400000
and i cannot draw vertical line here .what is the solution for this.
Edited by: jaihind on Mar 6, 2010 12:21 PM
hi,
problem is if the description field is long then other coloum are comming fine but if description caloumn is small then other also get affected and its comes towards left .
Edited by: jaihind on Mar 6, 2010 12:22 PM

Hi
For this u can resolve by using the Formatting characters ......
This is your layout ..
s.no| descriptio | UOM | Qty | Rate | AMT |
01 aaaaaaaaaaaaaaaaaaaaa 11.01 17.28 170000000 2400000
Assume that   your field names like
s.no      | description |    UOM      |    Qty      |      Rate      |         AMT       |
&sno&      &desc&         &UOM&       &Qty&         &rate&         &AMT&
asseme that length of these fields(in characters) as per your requirement will be ...
s.no      | description |    UOM      |    Qty      |      Rate      |         AMT       |
8                  15                  5                8                 10                  15
For these use formatting characters    like   ...
              s.no      | description      |    UOM      |    Qty      |      Rate      |         AMT       |
1stLine &sno& ,, &desc+0(15)&,, &UOM&       &Qty&        &rate&         &AMT&
2ndline                 &desc+15(15)&
&desc+0(15)& - it will print first 15 characters from 0th position
&desc+15(15)&- From 15th position it will print 15 characters ..
Hope you resolve your issue
Let me know if Any concerns,.......

SAP Script Printing

Hi,
Can we have 'Collate' functionality as in Word document in SAP script printing.

Hi Rathakrishnan,
It's not a functionality of SAP script, but you have to set an attribute of the output device. Use transaction SPAD, select your printer and hit button Output Device. Then go to Tab 'Output attributes' and set 'Copies as separate output requests (in SAP System)'. This is similar to the collate functionality.
Does this solve your problem?
Regards,
John.

CUPS problems with PDF printing

I am having all manner of problems with PDF printing. Recently added a Lexmark MX710 and have 7 machines that were previously printing fine to an X652de a T652 as well as a Samsung CLP770. All network printers.
Now there are bizarre issues with PDF printing. CUPS version 1.6.1. The MX710 will blue screen and reboot when printing one specific pdf without fail. There are all kinds of random nonsensical results when printing from different locations. A pdf that stalls the X and T652 with "filter error" will print from my own machine to the same printer, using the same versions of cups, .ppd file, and everything package related to cups.
Yet other PDF files will print, while some print complete gibberish, I can't find any rhyme or reason or anything predictable about any of it other than to say printing postscript files works fine all around.
This has been universally in KDE printing through Okular.
I've tried some things I've found suggested, such as modifying the mime.conv as suggested by an old ubuntu thread, adding the a2ps package, all to zero effect.
Last edited by TheWretched (2012-12-08 00:27:41)

At this point the only reasonable explanation I can think of is that the ppd package I downloaded and installed via included shell script from lexmark for the mx710 caused this whole catastrophe. The only common thread for this problem starting was that I used this on all of the affected machines and they now all manifest problems. And on four of these machines this is literally all that was done, they were loaded in september, have not been updated via pacman in any way, and are running the exact same version of cups poppler, and okular that they were then, which was working, and now cannot print pdf to any printer at all without causing one of several problems depending on the printer.
I cannot seem to get this reversed though. I've gone so far as to force remove all the cups packages, and delete the files associated with the install script, but the problem remains afterward. From what I can see so far all this lexmark package did was display a license agreement, then copy the ppd files in it's folder to /usr/share/ppd/Lexmark. This particular printer, the mx710 has no .ppd available that I have found other than this one from Lexmark directly. Open printing doesn't have anything for this model.
This printer's driver has some kind of a cups filter driver with it that the install script presumably installs, I suspect this could be what caused the problem specifically, but I must not be removing it correctly, despite following the file removal suggestions in the Lexmark readme for uninstallation. CUPS printing is something I am new to and only have a basic understanding of.
To answer some specific questions I nearly forgot, I don't have cups pdf installed. I have chrome installed which can successfully save pages to PDF, previously it could also print pdf, and presumably it prints everything as pdf given the cups pdf workflow. That is also broken now too, so printing from the browser causes the printer to fail as well. If I save as pdf from chrome, and print with adobe reader, it works.
Last edited by TheWretched (2012-12-11 14:25:40)

Priniting problem in script

Hi friends,
i am facing a problem in script. i have developed the form
and it is working fine .in print preview every thing seems to be ok.
when we try to take a print the right side characters are cutting down by 2
characters every time.
i have moved the content to left but the result is the same.
can any one tell me how to solve the issue.
Regards,
Srinivas

Hi,
Try to check the lenght of the field/var that you are printing.
change the alignment doesnt solve the problem.
Check in your code what is the lenght and if is the same in your form.
Sample:
&j_1bprnfli-cfop(4C)&
prints only 4 digits of the variable j_1bprnfli-cfop.
Regards.
Rodrigo Paisante

Script printing changes when transport from QTY to Production.

Hi all,
i m having a problem with sap script printing. i have a report which prints well in a perticular printer when it is in Quality server. but when i transport it to Production it gets different fonts style and the alignment of the fonts gets disturb, like out of 10 values in amount fields 1 or 2 amounts alignments gets changed.
what could be the reason for this. and what could be its solution.
plzz help me to solve this problem..
thanx...

Hi,
Please check the printers in both the Servers. The printer settings will do the change. Contact the Basis guys or the hardware guys there and check the printer settings.
Check the request numbers of the FORMS so that any other code replaces that old code you are telling.
But i strongly believe that it will be the printer settings.
Regards,
SUBBU.

Problem with HP printer hplip is not starting

My daemons line
DAEMONS=(syslog-ng portmap dbus hal network netfs hplip cups clamav alsa acpid !crond kdm)
I have installed it using pacman. If I run pacman -S hplip I get a message saying it is already there.

Okay, after a search I come up with the preferred printer installation method using the hp-setup command line tool. As this is supposed to be the 'HP' way to setup the printer and use hp-toolbox I decided to go this route. Naturally, the output is not promising:
# hp-setup
HP Linux Imaging and Printing System (ver. 0.9.8)
Printer/Fax Setup Utility ver. 0.7
Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[ERROR]: No devices found.
[ERROR]: Error occured during interactive mode. Exiting.
Now, why the heck would it not find the device when it is already set up via CUPS and working properly in the desktop environment? The latest hplip version is 0.9.10, but I somehow doubt using the 0.9.8 would cause this type of problem as the printer I use is not a recent piece of machinery.

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with Direct printing of PDF with Barcodes in R12

Hi All,
We are facing a problem in direct printing in EBS R12 with xml pdf reports which contains some barcode fonts. We are using fonts from IDAutomation for barcodes. Printing from request output is working fine. But when it is printed directly everything get printed other than the barcodes. Did anybody face this problem before and fixed it?
Regards,
Benny

Benny,
Output from XML Publisher comes out correctly. The barcodes are stripped off during pdftops conversion. Any idea?
How did you verify the above?
PASTA 3.0 Release Information (Doc ID 239196.1)
BIP PDF Output Does Not Print MICRD Barcode Font - View Output Ok (Doc ID 747195.1)
Thanks,
Hussein

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problem in script printing

Similar Messages

Maybe you are looking for