Problem in sending the smartform as email for other language except english
Hi Experts,
I could not send the smartform as an attachment for other languages, but where as i could send it in english.
The program is working fine with print priview but not when sending the SF as an attachment
(in other languages except english).
Please do find the below code which i used to send the smartform as an attachment.
Please let me know if there is any mistake in the code.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
*TRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_language = nast-spras
i_importance =
i_sensitivity =
i_text = l_text
i_hex =
i_header =
i_sender =
receiving
RESULT = l_email_object
CATCH cx_document_bcs .
*ENDTRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
hi,
i tried with ur problem.but i am able send mail in other languages also.actaullly i wrote a msg whether the mail has been sent or not.i got success message. i am placing my code here please go thorugh it,and do relavant modifications.
*& Report ZPPS_SMARTFORM_TO_PDF
REPORT ZPPS_SMARTFORM_TO_PDF.
PARAMETER: p_date LIKE sy-datum.
PARAMETER: p_rea TYPE char255.
DATA: t_otfdata TYPE ssfcrescl,
t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
w_bin_filesize TYPE i,
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
WA_OBJHEAD TYPE SOLI_TAB,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I,
nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSR_DEMO1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = wa_ctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = wa_outopt
USER_SETTINGS = 'X'
MYDATE = p_date
REASON = p_rea
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = t_otfdata
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = w_bin_filesize
BIN_FILE =
TABLES
OTF = t_otf
LINES = t_lines
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'MAIL-ID'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = T_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = T_OBJBIN
CONTENTS_TXT = T_OBJTXT
RECEIVERS = T_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
and i thought of one more soluyion u can write
wa_ctrlop-langu = T002-spras. i think it will also help for u.
revert back if any questions.
please reward me if helpful.
gupta.pullipudi
Similar Messages
-
Problem in sending the smartform as an email in a country specific language
Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF.Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF. -
Problem in sending the Smartform Output as PDF through Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
REPORT Y_SEND_MAIL2.
TABLES: vbrk, vbrp.
TYPE-POOLS: abap.
DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
DATA: i_formname TYPE tdsfname,
i_fm_name TYPE rs38l_fnam,
it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
DATA: is_bil_invoice TYPE lbbil_invoice,
output_options TYPE ssfcompop,
control_parameters TYPE ssfctrlop,
e_devtype TYPE rspoptype,
job_output_info TYPE ssfcrescl,
bin_file TYPE xstring,
lines TYPE TABLE OF tline WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
filelength TYPE i,
bin_filesize TYPE i,
docs TYPE TABLE OF docs WITH HEADER LINE.
*"Types
TYPES: t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
*"Workareas
DATA :w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
*internal tables
DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
DATA: BEGIN OF line_bin,
data(1024) TYPE x,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
So please suggest a solution.
Regards,
VishalContinued:
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
SELECT * FROM vbrk
INTO TABLE it_vbrk
WHERE fkdat IN s_fkdat
AND vbeln IN s_vbeln.
i_formname = 'Z_SD_JINDAL_INVOICE10'.
output_options-tddest = 'LP02'.
output_options-tdimmed = 'X'.
output_options-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = i_formname
IMPORTING
fm_name = i_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0. "checking subrc
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. "IF sy-subrc <> 0
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION i_fm_name "'/1BCDWB/SF00000097'
EXPORTING
control_parameters = control_parameters
output_options = output_options
user_settings = space
is_bil_invoice = is_bil_invoice
IMPORTING
job_output_info = job_output_info
TABLES
it_vbak = it_vbak
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*FORM convert_otf_2_pdf.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
* USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = job_output_info-otfdata[]
doctab_archive = docs[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDFORM. "convert_otf_2_pdf -
Hi how to send the smartform threw email
Hi all,
I have a smartform which I have to send threw email i want some of the data i.e there in smart form is to be printed on to the mail body. is it possible.
Thanks & Regards,
sam.Hi Sam,
Check this program.
REPORT Ztest_SEND_SMARTFORMS .
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Hope this resolves your query.
Reward all the helpful answers.
Regards -
Configuration to send the smartform through fax
Hi,
I have used CONVERT_OTF_AND_FAX and SO_OBJECT_SEND FM's to send the smartform through fax.After executing SO_OBJECT_SEND function module,I am getting sy-subrc alue as 9(OBJECT_NOT_SEND).I am able to send the document through fax.But when I click on display in SOST transaction it is just printing the output of the smartform.It is not coming in PDF format.
The code looks fine.I think there is some problem with confuration settings.Is there any configuration to be done to send the smartform output through fax?
Please reply.
Regards,
HemaHi,
Actually,my requirement is to send the smartform output through email with medium 'external send'.I have done some coding for that.it is working fine and I am able to send the smartform through email and open the attachment in PDF format.
But if the email id of the recipient is not present then the smartform output has to be sent through fax with the same medium 'external send'.
So I have done some coding to send the smartform through fax when the email id is not present.
I am able to send the output of smartform through fax.But when I clicked on display in SOST transaction,it is not coming in PDF format.It is coming in RAW format.
Is it possible to send the smartform output through fax with medium 'external send'?
Regards,
Hema -
Hi,
are the gif's available for other languages? I mean I have now english installed and this will give for the GO button a image on the button named go.gif. Is the go.gif also available in other languages or should I change the gif file myself?
Thanks
Herald ten DamThere are a number of so-called translation memory tools that can translate MIF files. There's a Wikipedia article on translation memory tools: http://en.wikipedia.org/wiki/Translation_memory
We use Star Transit, but SDL Trados can do the job as well and there are a number of other tools. These tools separate text from formatted. Then the text is segemented. This allows you to reuse previous translations when the source documents is modified. Only new and modified segements will have to be translated then. These tools are very useful, but most of them are very expensive. A pretty new tool which is more affordable is memoQ (which I have never used myself). It is available from http://en.kilgray.com/.
As for screenshots, I think the most important thing is to make sure that they are imported by reference.
HTH
Susanne -
Logo Problem While sending the smart form as an attachment via Email
Hi ,
I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send the smartforma as an attachement into the mailbox . it is sent correctly but the COLOR LOGO are not coming correctlly .
I checked the OTF to PDF file is getting converted correctly .i.e. if i am downloading the foem then it is displaying correctly , but in case of sending it to mailbox as an attached PDF file ,the logo are not comming correctly ,
If anybody faced such type of problem can u please clarify .
I am thinking the problem is in FM SO_NEW_DOCUMENT_ATT_SEND_API1 . this FM is not sending the Attached PDF file correctly .
All the TExt/variables are displaying correctly in the PDF file except the LOGO.while opening the PDF file one Warnng message is getting displayed : "An error occured while opening the Image" .
PLease help ..
Thanks,
sachiHi,
Edit your logo as 256 color bit map image and save it and upload into SE78,
And also better to use this FM :SO_DOCUMENT_SEND_API1 it is good for new versions.
thanks,
venkat.
Edited by: Satya venkat Rao.R on Dec 13, 2011 6:02 AM -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?
Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well... -
I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.
hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi -
Display and Send the Smartforms
Hi,
I send the smartfoms with pdf attachment.
But My client requirement is send and display the smartform.
can you please help me.
Thanks & Regards,
venkateshAfter sending the Smartform, you could call the assigned FM again to display the form in print preview mode... something like this:
wa_control_parameters-no_dialog = 'X'.
wa_control_parameters-preview = 'X'.
wa_output_options-tddest = 'LOCL'.
CALL FUNCTION fmname
EXPORTING
control_parameters = wa_control_parameters
output_options = wa_output_options
IMPORTING
job_output_info = wa_job_output_info
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
There was a similar thread a few days ago, where the requirement was to download the form in PDF and display it: "OTF end command // missing in OTF data" while converting smartform to pdf
There is a working test program in that thread, you could replace the downloading part with the email logic that you already wrote. Then call the FM again at the end for the form display. -
Data from check boxes fails to be collected, when sending the PDF as email
Hi
I am working on an interactive PDF that should act as an ordersheet for clients to fill out. I am using Acrobat Pro 9, and everything works as intended, but when the client tries to send the order by email (By pressing a button that uses "submit a form" as actio, where it sends the whole PDF to a single email), the pdf pops up in the email client, and everything looks fine, except all of the checkboxes. None of them have been checked, even though the client have done so. I have searched the forums without luck, so now i am trying in here.
I have made sure that the client is using the version, that has the extended reader rights.
If you feel need additional information regarding the PDF, just ask.
Thank you very much for your time.Edit>Preferences>Email accounts>List of email accounts. Click the drop-down that says "add account" and select Gmail. After adding it, you can go to the account area and change it to default.
-
Not able to see the output in sost when sending the image in email body
I am sending the image in email body and when m trying to see the output in SOST then it showing a page 'you are not connected to the internet'
I am able to see the output when m saving local objects but when m saving it in some package its showing me this page
Kindly help it
Regards
Pratham KapoorHello Prakash,
Thanks for the reply
I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
My Program is to put the logo in my email body
I am sending you the attached image -
I updated Firefox and now, when I select File, Send Link, a dialog box pops up asking me to establish a new account before I can send the link via email. I use Outlook, so how do I avoid setting up some new account and yet am able to send the link via Outlook?
I have a feeling it may have something to do with HotMail.com.My Error: I found out that it was Mozilla Thunderbird that was causing the problem. I uninstalled it and the problem went away.
-
Hello,
As the title says, I would like to know if it's possible to send the delivery failure email to a specific list.
I have correctly configured the mailbox so it's working like a whitelist, if you dont have the right to send email to it then you will recieve a delivery failure from Exchange. That is perfectly working.
But, my question is, for that specific mailbox, I'd like to know if we can send also the delivery failure to a specific list, in order to let the admins to know that someone tried to send an email to that mailbox.
Regards,Hi,
According to your description, you want the specific mailbox send NDR to a group(list). If I misunderstand your meaning, please feel free to let me know.
If yes, I’m afraid that it’s an unsupported behavior:
http://support.microsoft.com/kb/817220
However, admin can depend audit log to detect the mailbox activities.
http://technet.microsoft.com/en-us/library/ff459237(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support
Maybe you are looking for
-
How do I add a 'folder' on my iPhone through iOS8?
I Want to Be able to sort my emails on my iPhone. But I can't seem to create a 'folder' as such. I am using a Bigpond email account. What can/should I do? Can it be done?
-
Entire music and photo libraries not showing up
I can't access my entire iPhoto and iTunes libraries on my Apple TV. I have both programs open, ATV sees the libraries, but picks a small, seemingly random, sample from each instead of allowing me to access all my photos and music. The separate "Scre
-
it 's 10g set serveroutput on set line 2000 drop table emp; CREATE TABLE EMP ( EMPNO NUMBER(10), ENAME VARCHAR2(10), JOB VARCHAR2(9), MGR NUMBER(4), HIREDATE DATE, SAL NUMBER(7, 2), COMM NUMBER(7, 2), D
-
Table names in generated stored procs are qualified with sa schema name
I am using OMW 9.2.0.1.2 with the 9.2.0.1.3 SQL Serevr plugin to help with a SQL Server 7 to Oracle 9.2.0.1 migration on NT. As is common with SQL Server databases, the dbo is sa. I don't want my Oracle schema to be called sa. I have succesfully gott
-
My Compressor Export file not liked by a program
Hi, So my Quicktime Movie export files from Motion are not being allow to be imported into a audio program i use (Ableton Live)....I've tried H264 and PJEG both at 640x480 and 29.97 I've checked had no problems importing movies that had the same sett