Problem in setup weblogic9.2 MP2 cluster with 2 linux (RHEL4) servers

Hi All,
          We are trying to setup a clusters of weblogic 9.2 servers on 2 linux machine.
          However we encounter problems when testing load balancing and session replication on the 2 servers.
          We use the configure wizard to configure an adminserver, managed1 server on the 1st linux machine, and managed2 server on the 2nd linux machine. No machine or unix machine is set.
          We are able to start both adminserver, managed1 and managed2 servers.
          And we are able to deploy application to the cluster and run it successfully.
          When we use an apache proxy or the weblogic proxy plugin as an load balancer, we are not able to use the round-robin (load-balancing) features and session replication between the two servers.
          However, when we setup all the servers(adminserver,managed1,managed2) on 1 linux machine, we are enable to use the apahce/weblogic proxy plugin to do round-robin load-balancing and session replication.
          We suspect it is related to multicast.
          When we ping the multicast address setup on each linux machines, we can only see response from the localhost machine.
          When we use util.MulticastTest on linux1 machine, it works properly with only response from linux1 machine.
          When we use the same command util.MulticastTest on linux2 machine, it give the following exception:
          java.net.SocketException: Not a multicast address
          at java.net.MulticastSocket.joinGroup(MulticastSocket.java:273)
          at utils.MulticastTest.<init>(MulticastTest.java:82)
          at utils.MulticastTest.main(MulticastTest.java:233)
          -bash: /bea/weblogic92/server/lib/wlutil.jar: cannot execute binary file
          Both linux servers have no firewall with iptables service stopped.
          Please give us some advices on it.
          Thanks!
          Edited by keatonchan at 12/03/2007 12:12 AM
          Edited by keatonchan at 12/03/2007 12:14 AM

Just a guess, but it appears the provider-url can specify the cluster name directly, instead of having to specify the individual ports. That's probably a better way to go anyway, but I don't know if it would fix your problem. This is described at [http://e-docs.bea.com/wls/docs90/jndi/jndi.html]

Similar Messages

  • Issue to setup local Coherence cluster with WKA (well-known-address)

    Hello - I have started local coherence cluster using WKA with single node,but when I start CacheFactory (coherence.cmd) with same configuration it throws following error message.
    Any help is appricicated.
    JVM startup Arrgument
    -Dtangosol.coherence.override=cluster.xml
    cluster.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <coherence xmlns="http://xmlns.oracle.com/coherence/coherence-operational-config" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-operational-config http://xmlns.oracle.com/coherence/coherence-operational-config/1.1/coherence-operational-config.xsd">
    <cluster-config>
      <unicast-listener>
       <well-known-addresses>
        <socket-address id="1">
         <address>171.193.103.25</address>
         <port>8088</port>
        </socket-address>
       </well-known-addresses>
          </unicast-listener>
    </cluster-config>
    <logging-config>
      <destination>stdout</destination>
      <severity-level>9</severity-level>
    </logging-config>
    </coherence>
    Cluster startup Message
    WellKnownAddressList(Size=1,
      WKA{Address=171.193.103.25, Port=8088}
    MasterMemberSet(
      ThisMember=Member(Id=1, Timestamp=2013-10-24 11:07:18.603, Address=171.193.103.25:8088, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:16704, Role=CoherenceServer)
      OldestMember=Member(Id=1, Timestamp=2013-10-24 11:07:18.603, Address=171.193.103.25:8088, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:16704, Role=CoherenceServer)
      ActualMemberSet=MemberSet(Size=1
        Member(Id=1, Timestamp=2013-10-24 11:07:18.603, Address=171.193.103.25:8088, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:16704, Role=CoherenceServer)
      MemberId|ServiceVersion|ServiceJoined|MemberState
        1|3.7.1|2013-10-24 11:07:48.843|JOINED
      RecycleMillis=1200000
      RecycleSet=MemberSet(Size=0
    TcpRing{Connections=[]}
    IpMonitor{AddressListSize=0}
    2013-10-24 11:07:48.869/31.794 Oracle Coherence GE 3.7.1.0 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
    2013-10-24 11:07:49.058/31.983 Oracle Coherence GE 3.7.1.0 <D5> (thread=DistributedCache, member=1): Service DistributedCache joined the cluster with senior service member 1
    2013-10-24 11:07:49.077/32.002 Oracle Coherence GE 3.7.1.0 <D6> (thread=DistributedCache, member=1): Service DistributedCache: sending PartitionConfig ConfigSync to all
    2013-10-24 11:07:49.121/32.046 Oracle Coherence GE 3.7.1.0 <D5> (thread=ReplicatedCache, member=1): Service ReplicatedCache joined the cluster with senior service member 1
    2013-10-24 11:07:49.128/32.053 Oracle Coherence GE 3.7.1.0 <D5> (thread=OptimisticCache, member=1): Service OptimisticCache joined the cluster with senior service member 1
    2013-10-24 11:07:49.131/32.056 Oracle Coherence GE 3.7.1.0 <D5> (thread=Invocation:InvocationService, member=1): Service InvocationService joined the cluster with senior service member 1
    2013-10-24 11:07:49.132/32.057 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=1):
    Services
      ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.7.1, OldestMemberId=1}
      InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
      PartitionedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
      ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1}
      Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
      InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMemberId=1}
    Started DefaultCacheServer...
    Error Message from CacheFactory
    C:\Users\Zk5rjg8>C:\coherence37\bin\coherence.cmd
    ** Starting storage disabled console **
    java version "1.6.0_51"
    Java(TM) SE Runtime Environment (build 1.6.0_51-b11)
    Java HotSpot(TM) 64-Bit Server VM (build 20.51-b01, mixed mode)
    2013-10-24 11:13:22.851/0.392 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/C:/coherence37/lib/coherence.jar!/tangosol-coherence.xml"
    2013-10-24 11:13:22.920/0.462 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "file:/C:/coherence37/cluster.xml"
    2013-10-24 11:13:22.924/0.465 Oracle Coherence 3.7.1.0 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
    2013-10-24 11:13:22.924/0.465 Oracle Coherence 3.7.1.0 <D6> (thread=main, member=n/a): Loaded edition data from "jar:file:/C:/coherence37/lib/coherence.jar!/coherence-grid.xml"
    Oracle Coherence Version 3.7.1.0 Build 27797
    Grid Edition: Development mode
    Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
    2013-10-24 11:13:23.722/1.263 Oracle Coherence GE 3.7.1.0 <D4> (thread=main, member=n/a): TCMP bound to /171.193.103.25:8090 using SystemSocketProvider
    2013-10-24 11:13:54.001/31.542 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2013-10-24 11:13:23.762, Address=171.193.103.25:8090, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:17192, Role=CoherenceConsole) has been attempting to joi
    2013-10-24 11:13:54.001/31.542 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:14:24.402/61.943 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:14:54.805/92.346 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:15:25.207/122.748 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:15:55.610/153.151 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:16:26.012/183.553 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:16:56.414/213.955 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:17:26.817/244.358 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:17:57.219/274.760 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Cluster, member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond
    2013-10-24 11:17:58.271/275.812 Oracle Coherence GE 3.7.1.0 <Error> (thread=Cluster, member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.7.1}}
    2013-10-24 11:17:58.273/275.814 Oracle Coherence GE 3.7.1.0 <Error> (thread=Recovery Thread, member=n/a): Full Thread Dump
    Thread[PacketListener1,8,Cluster]
            java.net.PlainDatagramSocketImpl.receive0(Native Method)
            java.net.PlainDatagramSocketImpl.receive(Unknown Source)
            java.net.DatagramSocket.receive(Unknown Source)
            com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:22)
            com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:1)
            com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:20)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
            java.lang.Thread.run(Unknown Source)
    Thread[PacketReceiver,7,Cluster]
            java.lang.Object.wait(Native Method)
            com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
            com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
            java.lang.Thread.run(Unknown Source)
    Thread[Attach Listener,5,system]
    Thread[PacketPublisher,6,Cluster]
            java.lang.Object.wait(Native Method)
            com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
            com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
            java.lang.Thread.run(Unknown Source)
    Thread[Cluster|STATE_ANNOUNCE|Member(Id=0, Timestamp=2013-10-24 11:13:23.762, Address=171.193.103.25:8090, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:17192, Role=CoherenceConsole),5,Cluster]
            sun.nio.ch.WindowsSelectorImpl$SubSelector.poll0(Native Method)
            sun.nio.ch.WindowsSelectorImpl$SubSelector.poll(Unknown Source)
            sun.nio.ch.WindowsSelectorImpl$SubSelector.access$400(Unknown Source)
            sun.nio.ch.WindowsSelectorImpl.doSelect(Unknown Source)
            sun.nio.ch.SelectorImpl.lockAndDoSelect(Unknown Source)
            sun.nio.ch.SelectorImpl.select(Unknown Source)
            com.tangosol.coherence.component.net.TcpRing.select(TcpRing.CDB:11)
            com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onWait(ClusterService.CDB:6)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
            java.lang.Thread.run(Unknown Source)
    Thread[Reference Handler,10,system]
            java.lang.Object.wait(Native Method)
            java.lang.Object.wait(Object.java:485)
            java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
    Thread[Finalizer,8,system]
            java.lang.Object.wait(Native Method)
            java.lang.ref.ReferenceQueue.remove(Unknown Source)
            java.lang.ref.ReferenceQueue.remove(Unknown Source)
            java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
    Thread[Signal Dispatcher,9,system]
    Thread[PacketSpeaker,8,Cluster]
            java.lang.Object.wait(Native Method)
            com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
            com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
            com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
            com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:21)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
            java.lang.Thread.run(Unknown Source)
    Thread[Logger@1457155060 3.7.1.0,3,main]
            java.lang.Object.wait(Native Method)
            com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
            java.lang.Thread.run(Unknown Source)
    Thread[PacketListener1P,8,Cluster]
            java.net.PlainDatagramSocketImpl.receive0(Native Method)
            java.net.PlainDatagramSocketImpl.receive(Unknown Source)
            java.net.DatagramSocket.receive(Unknown Source)
            com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:22)
            com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:1)
            com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:20)
            com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
            java.lang.Thread.run(Unknown Source)
    Thread[main,5,main]
            java.lang.Object.wait(Native Method)
            com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:18)
            com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
            com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
            com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
            com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
            com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
            com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
            com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
            com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
            com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
            com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
            sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
            sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
            java.lang.reflect.Method.invoke(Unknown Source)
            com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
    Thread[Recovery Thread,5,Cluster]
            java.lang.Thread.dumpThreads(Native Method)
            java.lang.Thread.getAllStackTraces(Unknown Source)
            com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:810)
            com.tangosol.internal.net.cluster.DefaultServiceFailurePolicy.onGuardableRecovery(DefaultServiceFailurePolicy.java:44)
            com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$WrapperGuardable.recover(Grid.CDB:1)
            com.tangosol.net.GuardSupport$Context$1.run(GuardSupport.java:653)
            java.lang.Thread.run(Unknown Source)
    2013-10-24 11:17:58.273/275.814 Oracle Coherence GE 3.7.1.0 <Warning> (thread=Recovery Thread, member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}
    Exception in thread "main" 2013-10-24 11:18:24.025/301.566 Oracle Coherence GE 3.7.1.0 <Error> (thread=main, member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
      MemberSet=MasterMemberSet(
        ThisMember=null
        OldestMember=null
        ActualMemberSet=MemberSet(Size=0
        MemberId|ServiceVersion|ServiceJoined|MemberState
        RecycleMillis=1200000
        RecycleSet=MemberSet(Size=0
            at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
            at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
            at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
            at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
            at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
            at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
            at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
            at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
            at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
            at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
            at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
            at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
            at java.lang.reflect.Method.invoke(Unknown Source)
            at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
    java.lang.reflect.InvocationTargetException
    2013-10-24 11:18:24.025/301.566 Oracle Coherence GE 3.7.1.0 <D5> (thread=Cluster, member=n/a): Service Cluster left the cluster at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
            at java.lang.reflect.Method.invoke(Unknown Source)
            at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
    Caused by: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
      MemberSet=MasterMemberSet(
        ThisMember=null
        OldestMember=null
        ActualMemberSet=MemberSet(Size=0
        MemberId|ServiceVersion|ServiceJoined|MemberState
        RecycleMillis=1200000
        RecycleSet=MemberSet(Size=0
            at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
            at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
            at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
            at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
            at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
            at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
            at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
            at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
            at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
            at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
            at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
            at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
            ... 5 more
    C:\Users\Zk5rjg8>

    Hi SajeevPynadath
    1
    First start the server process  with "cache-server.cmd"
    2
    After that you can start another server or client process,  the "coherence.cmd" script is to start a client process to join the cluster .
    3
    Then now you have 2 processes , and your cluster.xml will look like this :
    <socket-address id="serverprocess">
         <address>171.193.103.25</address>
         <port>8088</port>
        </socket-address>
    <socket-address id="clienprocess">
         <address>171.193.103.25</address>
         <port>8089</port>
        </socket-address>
    4
    Before start each process remember put in java command line :
    for server
    -Dtangosol.coherence.localhost=171.193.103.25 -Dtangosol.coherence.localport=8088
    for client
    -Dtangosol.coherence.localhost=171.193.103.25 -Dtangosol.coherence.localport=8089
    regards,
    Leo_TA

  • Guide on how to setup/configure a cluster of v10 app servers? BPEL + Jdev

    I am planning to run a cluster of 2 app servers instead of currently a stand alone App server
    for BPEL processes. Is there a guide/tutorial about how to configure the app servers so that they run as a cluster?
    This guide show cover necessary adjustments in BPEL source code and in JDeveloper (deployment) as well.
    Peter
    Edited by: user559463 on Aug 3, 2010 10:42 AM

    Hi
    A good usefull guide is the one
    http://orasoa.blogspot.com/2009/04/soa-cluster-installation.html
    kind regards
    Michel

  • Problem in JMS congiuration in cluster

    Hi,
    I am facing a big problem in cluster.
    I am using weblogic server8.1 with SP5.
    Created a cluster with 2 managed servers. Two JMS servers and deployed them on managed servers i.e. JMSServers1 is deployed on ManagedServer1 (migratable) and JMSServer2 is deployed on ManagedServer2 (migratable). There are 4 distributed JMS Topics are created for each server. My program uses these JMS topics and picks up the data and inserts them into the Database. The problem here is it is inserting 2 times each record. If I use single server without cluster it is inserting one time. Some times it is not JMS clients not at all invoked when even a message is published into the topic.
    What might be the problem? I am very new to this clustering. Its very urgent please.

    Hi,
    thanks a lot for your replies.
    our driver settings are correct (as I can see).
    I removed value 819 from CCSID, but we have the same effect.
    The messages in the local queue manager are TextMessages in XML.
    Does anybody know, if we need the standard modules (ConvertJMSMessageToBinary and ConvertBinaryToXMBMessage) in this case?
    Is it possible to set the CCSID for the message payload anywhere in the configuration?
    The CCSID in the Source tab doesn't have any influence to the encoding of the payload message, only to the header data.
    Regards
    Thorsten

  • Problem to Setup Oracle11g(RPM Not Fount)

    Hi
    I have a Problem to Setup Oracle11g in RedHat Enterprise Linux 4.0 (ES).
    My Kernel Version is 2.6.9-34.EL
    The Following list of RPM Must be install in OS.
    But I can not Setup the four RPM is Listed Bellow.
    compat-libstdc++-33.2.3-47.3
    glibc-2.3.9.4-2.19
    glibc-common-2.3.9.4-2.19
    glibc-devel-2.3.9.4-2.19
    This RPM are not in My Disk.
    How can I solve this Problem.
    Thanks
    Tamim

    But I can not Setup the four RPM is Listed Bellow.
    compat-libstdc++-33.2.3-47.3This rpm should be on one of the installation cd's
    glibc-2.3.9.4-2.19
    glibc-common-2.3.9.4-2.19
    glibc-devel-2.3.9.4-2.19The problem here could be a "spelling" error in the Install Guide - look for glibc...2.3.4 instead.

  • How to configure AMconfig.properties on gateway with 2 portal servers

    Hello,
    I run into an issue where I want to setup 1 portal gateway with 2 portal servers(+ access manager) all on separate machines. How can I define in AMconfig.properties that there are possible two portal servers.
    All is version 2005Q1
    Please see part of my actual AMconfig.properties :
    # grep portal AMConfig.properties
    com.iplanet.am.directory.host=portal1.domain.int
    com.iplanet.am.server.host=portal1.domainl.int
    com.iplanet.am.console.host=portal1.domain.int
    com.iplanet.am.profile.host=portal1.domain.int
    com.iplanet.am.naming.url=http://portal1.domain.int:80/amserver/namingservice
    com.iplanet.am.notification.url=http://portal1.domain.int:80/amserver/notificationservice
    com.iplanet.am.localserver.host=portal1.domain.int
    com.sun.identity.liberty.interaction.wspRedirectHandler=http://portal1.domain.int:80/amserver/WSPRedirectHandler
    Kind Regards
    Roland Vlerick

    See this thread.
    Error Installing Groupware Portlets for WLP 10.3.2
    Brad

  • Persistent Store Problems for MYSQL Enhanced Cluster With OpenMQ 4.4

    I am trying to implement an enhanced cluster with failover. I have edited the config files for each broker instance for a persistent store. I have appended the following to each of the config.properties files:
    imq.brokerid=myclusterinstanceINSTANCE1 # I substitute INSTANCE2 for INSTANCE1 for broker #2
    imq.persist.store=jdbc
    imq.persist.jdbc.dbVendor=mysql
    imq.persist.jdbc.mysql.property.url=jdbc:mysql://xxx.xxx.xxx.xx:3306/test
    imq.persist.jdbc.mysql.user=user1
    imq.persist.jdbc.mysql.needpassword=true
    imq.persist.jdbc.mysql.password=mypass
    imq.cluster.ha=true
    imq.cluster.clusterid=mycluster
    imq.cluster.brokerlist=xxx.xxx.xxx.x:37676,yyy.yyy.yyy.y:37676
    I then create the persistence storage with "imqdbmgr create tbl". When I view the data in the tables it creates, I have one row. Under Store_Version, I have 410. Under LOCK_ID, it has NULL. When I go to start the brokers with imqbrokerd, I get the following error:
    ERROR [B3198]: Error initializing cluster manager:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4239]: Failed to load persistent store version from database table MQVER41Cmycluster
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:310)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.DBTool.updateStoreVersion410IfNecessary(DBTool.java:350)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.checkStore(JDBCStore.java:3599)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.<init>(JDBCStore.java:127)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at com.sun.messaging.jmq.jmsserver.persist.StoreManager.getStore(StoreManager.java:157)
    at com.sun.messaging.jmq.jmsserver.Globals.getStore(Globals.java:967)
    at com.sun.messaging.jmq.jmsserver.cluster.ha.HAClusterManagerImpl.initialize(HAClusterManagerImpl.java:181)
    at com.sun.messaging.jmq.jmsserver.Globals.initClusterManager(Globals.java:903)
    at com.sun.messaging.jmq.jmsserver.Broker._start(Broker.java:777)
    at com.sun.messaging.jmq.jmsserver.Broker.start(Broker.java:410)
    at com.sun.messaging.jmq.jmsserver.Broker.main(Broker.java:1971)
    Caused by: java.lang.NullPointerException
    at com.mysql.jdbc.ResultSetImpl.findColumn(ResultSetImpl.java:1103)
    at com.mysql.jdbc.ResultSetImpl.getInt(ResultSetImpl.java:2777)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:298)
    ... 16 more
    I believe this error is attributed to the NULL value under LOCK_ID. I think that the value under LOCK_ID should be the name of the broker from the config file (even though I specified them in the config files). Any ideas?? THANKS!

    Just some pointers -- maybe this will be of use:
    If you haven't already read it, please take a look at the [ MySQL setup guide|https://mq.dev.java.net/OpenMQ_MySQLCluster_Setup_Guide.html] .
    We recommend using NDB Data-store of MySQL Cluster, though this isn't an absolute requirement. Due to some issues we have found with earlier versions, we recommend using MySQL Cluster, 7.0.9 or better (the current version is 7.0.16, or 7.1.5). Either of these would contain Connector/J.
    I'd also recommend using the latest version -- MQ 4.4update2 (just in case you happen to have an older copy). There were many minor improvements in the integration with MySQL from the original 4.4 release, to update 2. This is linked at the MQ download page: [https://mq.dev.java.net/downloads.html]

  • Problem with Linux executable in solaris

    Hello
    I have a problem. We have sunblade workstation with OS solaris 2.8 version. I have downloaded a program which is developed under RedHat 5.1 and complied with Egcs-1.0.2. when i execute this program i am getting the message like bash: ./Al: cannot execute binary file
    I would be thankfull if someone tell me how to solve the problem.
    Thanks Raji

    You need lxrun do be able to run Linux binaries on Solaris x86. You can get it at
    http://soldc.sun.com/freeware/details/detail_lxrun_0.9.6.1_8_Intel.html
    I've never used it, so please post your results here.

  • HEAVY Problems with Linux x86_64 on K8T Neo

    Hello, Community!
    I experience *HEAVY* Problems with Linux on my MSI K8T Neo (FSR). Since the customer support of the german dependancy seems to ignore my call for help I'm in good hope that maybe you can help me out or give me some useful advise.
    First some Hardware Specs of my system:
    MSI K8T Neo FSR, Rev 1.1, BIOS 1.5
    AMD Athlon 64 3000+
    3x 512MB Kingston DDR400
    Enermax EG365P-VE (350W) PSU (3.3V/5V 185W Combinded)
    MSI GeForce FX5200 TDR 128
    Adaptec ATA RAID AAR1200A (HPT370A) in PCI Slot 3
    Hauppauge WinTV PCI in PCI Slot 5
    Maxtor 4K040H2 (40GB) as Primary Master
    JLMS XJ-HD166S DVD-ROM as Primary Slave
    LiteOn LDW-411S DVD+/-RW as Secondary Master
    LiteOn LTR-52327S CD-RW as Secondary Slave
    2x Maxtor 6Y060L0 (60GB) on HPT370A as Primary Master/Slave
    Seagate ST380020A (80GB) on HPT370A as Secondary Master
    Maxtor 32049U3 on HPT370A as Secondary Slave
    KeyTronic KT2001 USB Keyboard
    Microsoft Optical Wheel Mouse Blue USB
    I've downloaded Fedora Core 1 x86_64 as well as the lately released Fedora Core 2 test 3 x86_64 distribution. Both CD sets have been burnt ok.
    If I try to install Core 1 x86_64 (Kernel 2.4.22-1.2179) the kernel crashes with a "attempted to kill idle task" panic. As far as I've learned the workaround is to give idle=poll as kernel parameter. This resolves the kernel panic, but the installer randomly crashes with segfaults at a random stage; sometimes while loading anaconda, sometimes during package install.
    If I try to install Core2 test 3 x86_64 (Kernel 2.6.5) I get a, completely new, error message while the kernel does the PCI Scan:
    ******* Your BIOS seems to not contain a fix for K8 errata #93
    ******* Working around it, but it may cause SEGVs or burn power
    ******* Please consider a BIOS update
    ******* Disabling USB legacy in the BIOS may also help
    I removed my USB keyboard, connected a PS/2 keyboard, disabled to USB Legacy option (I need it enabled in order to use Ghost) in the BIOS and booted again.
    The error message is gone now, but as in Core 1 the installer still crashes randomly with segfaults. I'm still unable to go all the way through the installation routine.
    I even tried to install Fedora Core 1 "i386": again there are segfaults during install.
    Contrary to the problems I experience while trying to install Linux my Windows XP (32-Bit), as well as a test installation of Windows XP 64-Bit, run like a charm without any problems. Strange but true.
    Since I already read trough several posts in this forum I already tried running my system with memory sticks from another manufacturers as well as with a more powerful PSU. I even removed my tv-card and raid-controller.
    Nogo - Linux still crashes randomly and Windows still works without any flaws.
    Has anyone a clue what I can/must do to successfully install Linux?
    Might it be that the BIOS has some flaws that might cause the problems?
    Has anyone managed to install Linux (what distribution) on this Mainboard?
    I would greatly appreciate any help. If you need to know something I haven't provided here please feel free to ask. I'll answer ASAP.
    Thank you in advance.
    P.S.: The system is *NOT* overclocked in any way.

    And now even the last problem is solved ...
    Since I was successful in installing a basic Gentoo system but still failed to install Fedora I reflashed BIOS 1.5. This time I cleared the CMOS by unplugging the PSU, setting the jumper and removing the backup battery.
    Yesterday I only flashed it with the /a switch, which should have cleared the CMOS as well - so far for the theory. However, it once went fine as I upgraded from BIOS 1.1 to 1.4.
    After setting up the BIOS options again I gave it another try and booted from Fedora (Core 2 test 3) install CD: No more complains about the CPU errata, although USB legacy is enabled, and I even went through the installation without any problems.
    It seems as I will stick with Gentoo as my primary distribution since the kernel makes a more "mature" impression than the one from Fedora (i.e. the K8 PowerNOW! Driver seems to be missing in Fedora's Kernel 2.6.5).
    By using an spare Athlon XP Mainboard I worked out that only one of my three Kingston memory sticks had errors - I'm going to replace the faulty stick tomorrow.
    Now for the conclusio:
    Thanks, especially you JLP, for helping me with my issue. Without the advise to use Gentoo, and the included MemTest86, I wouldn't have been able to track down the error to a faulty memory stick that fast since Windows always ran fine.

  • Cluster Setup Support Rules fails with Warnings

    Hi,
    I'm in the process of installing our ECC production server in a clustered environment on windows server 2008 with SQL server 2008 as our database.
    The MSCS cluster at the OS level has been configured successfully. When I start the SQL server installation as mentioned in the installation guide, the Setup Support Rules fails with following warnings.
    1. The setup support file prompts me to set the MSDTC service as a clustered one but it was not mentioned anywhere in the installation guide that the MSDTC service needs to be clustered. Do I need to cluster that service with seperate network ip address and cluster group ?
    2. The Network binding order issues a warning even though the adapters are set up in the right order as mentioned in the installation guide.
    3. Eventhough there is a internet connectivity available in the server, the "Microsoft .Net Application Security" check issues a warning.
    NB: As per the cluster validation report, the clustering at the OS level seems to be fine.
    Please provide me your valuable suggestions to rectify these warnings. Can I ignore these warnings and proceed with the installation of SQL Server ?
    Regards,
    Varadharajan M

    Hi,
    Microsoft Distributed Transaction Coordinator
    Is is user by older versions of Mssql database.
    From a SAP perspective you don't need this service.
    You can ignore setup request for this service.
    As per the reply, I understand that the MSDTC service is not mandatory to cluster in Windows Server 2008/MS SQL Server 2008. But when i try to install the SQL DB, the Set support rule ends up with warnings saying that the MSDTC service should be clustered. Can I ignore the warnings and proceed with the installation. Can anyone confirm this please ?
    Also please confirm whether we need to have the db cluster group in the DNS before initiating the SQL Server Set up.
    Regards,
    Varadharajan M

  • Error "printhead problem please use setup cartidge that came with the printer"

    Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...",  then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible  by printer but when i use the black then it says "properly not installed, missing cartidge".
    So please tell me  do i need to purchase a new black cartidge, will it work? or what shoud i do ?
    cartidge NO- 685
    Thanks
    Nirmal

    Hi @nirmal007,
    Welcome to the HP Support Forum!  I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer.  I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue. 
    I recommend you try the following steps before you consider purchasing a new black ink cartridge.  Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
    Secondly:
    Make sure that the ink cartridges are properly vented and seated correctly
    If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
    Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
    Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
    Figure : Remove the cartridge from the slot
    Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
    Figure : Vent area on the top of the cartridge
    If the cartridge still has the orange pull-tab attached, pull to remove it.
    Figure : Orange pull tab
    If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
    Figure : Clean the clogged vent with a pin
    Clogged vent
    With a straight pin, gently remove excess adhesive from the vent
    Unclogged vent
    With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
     note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
    Figure : Reinsert the cartridge
    Repeat these steps to inspect the vents on each of the cartridges.
    Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
    Close the cartridge access door.
    Figure : Close the cartridge access door
    Source
    Thirdly, try cleaning your cartridge contacts:
    Manually cleaning the print cartridge contacts
    Follow the steps below to manually clean the print cartridge contacts:
    Gather the following items to clean the contacts:
    Distilled water (tap water may contain contaminants that can damage the print cartridge)
    Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
    Open the print cartridge door.
    Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
     caution:
    Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
     caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
    Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
    Gently wipe the copper-colored contacts with the cotton swab.
     caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
    Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
    Insert the print cartridge in the printer, and then close the print cartridge door.
    Source
    If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one.  Let me know if this helps.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Anyone setup a DVR with linux?

    found a package on sourceforge called DVR and wondered if anyone has tried it or has successfully setup a dvr at home with linux. want to get windows xp media center (i cant believe i actually typed those words!) but if there is an open source linux way, then i want to do that
    need to know if the dvr package on sourceforge works and what type of video card was used. i know i need a tv tuner card and will probably get a hauppauge, but will that work with linux ir should i get an ati card
    thanks for any input and/or advice

    mdirolf wrote:just installed mythtv using the pkgbuilds in the AUR.  so far everything is working pretty well, the install went more smoothly then i had anticipated after reading many mythtv horror stories.  im using the hauppage pvr-150, which is working really well and is considerably cheaper than the other hauppage cards
    The 150 is cheap becuse it has no hardware decoder - it's all done in software.  I personally like the 250 myself, because it takes the processor strain down and allows you to use cheaper (and therefore quieter) processors.
    If you're really planning on building a set-top box, I'd suggest:
    · Two Hauppauge PVR-250s - so you can record one channel and watch live TV on another (i.e. rewind, pause, fast forward live TV as you watch) - it pays off.
    · A motherboard that supports a Pentium M (yes, they do exist)
    · A geforce MX 4000 series - onboard TV out, good card, no fan
    · The slowest DVD/ROM you can find - the slower the better.  It only takes a 1X to play a video DVD, but a 16X is going to spin up and sound like ass when you're watching Braveheart.
    · The largest disks you can imagine.  1 hour of raw TV is huge.
    · A seperate RF remote system - this is the complicated part and you can always use a wireless keyboard, but the RF remote is really cool
    Now for the record, I have never done this, but I setup and messed with myth a bit.  I *planned* a set-top box for a long time, then I got Dish Network and their 100 hour DVR was 5 cents more a month... so my pipe-dream died.... it'd still be cool though, but I can't implement alot of it  on the Dish Network lines....

  • Problem with Linux AS 2.1

    Hi Guru's
    I installed RHAS 2.1 it was installed successfully but it is not opening Gnome or KDE, it is opening only command prompt, i run startx command also even it is not
    opening. what i will do please tell me
    Regards

    dear
    first
    to open file /etc/inittab
    do this
    chmod 777 /etc/initab
    this change mode to full permissions (read-write even execute) for owner (root) group and others
    second
    ur hardware i think it compitable with linux as 2,1
    third
    as u said u enterd init5 command and it switches to init3 give me some time and i will told u files to check
    bye now

  • Jdev with Linux Mandriva problem

    Hello,
    I'm a beginner with linux.
    I've installed Linux Mandriva Spring 2007 (live CD distribution) followed by J2SE jdk1.5.0_05 and Jdev 10.1.3.2.
    I've created a user running with CShell (.cshrc)
    When i start Jdev, i've the first window "Tip of the day", but when i close it, i've the "Oracle Jdeveloper: Start page" completely empty !!! (no menu, frames ..) so i can do anything.
    Can anybody help me to run Jdev with my Linux version ?
    Thanks.
    Jean-Marc

    Hi!
    Are you running from the CD, or you have de Mandriva distro installed on hard drive?
    Greetings!
    HeCSa.

  • DB and listner  auto start with linux problem

    Dear all :
    i can't set DB auto start with linux
    my db version 10g linux 5
    I followed these steps :
    edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
    TSH1:/u01/app/oracle/oracle/product/10.2.0/db_1:Y
    create a file called "/etc/init.d/dbora" as the root user, containing the following.
    #!/bin/sh
    # chkconfig: 345 99 10
    # description: Oracle auto start-stop script.
    # Set ORA_HOME to be equivalent to the $ORACLE_HOME
    # from which you wish to execute dbstart and dbshut;
    # Set ORA_OWNER to the user id of the owner of the
    # Oracle database in ORA_HOME.
    ORA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
    ORA_OWNER=oracle
    if [ ! -f $ORA_HOME/bin/dbstart ]
    then
    echo "Oracle startup: cannot start"
    exit
    fi
    case "$1" in
    'start')
    # Start the Oracle databases:
    # The following command assumes that the oracle login
    # will not prompt the user for any values
    su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
    su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
    'stop')
    # Stop the Oracle databases:
    # The following command assumes that the oracle login
    # will not prompt the user for any values
    su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
    su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
    esac
    chmod 750 /etc/init.d/dbora
    chkconfig --level 345 dbora on
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
    # ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora

    Follow this part of Oracle Doc,
    Automating Shutdown and Startup
    http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref249
    Also run your script manually see if it will run sucessfully.
    /etc/init.d/dbora start
    /etc/init.d/dbora stop

Maybe you are looking for

  • Get all values from multi select in a servlet

    Hello, I have a multi <select> element in a HTML form and I need to retrieve the values of ALL selected options of this <select> element in a servlet. HTML code snippet <select name="elName" id="elName" multiple="multiple"> Servlet code snippet respo

  • Incomplete Data - Synchronization process

    Hi! Everyone When I want to get a new information I have to sync. But I have to do the synchronization process around three to four times in order to get new information. Can anyone tell me what is the problem I am having ??? Why I am gettign the mes

  • How do I copy just the main region of a looped region & not the loops?

    How do I copy just the main region of a looped region & not the looped bits? Sometimes on the last iteration of a loop, I want to make a slight change in the notes, and therefore need to insert and actual copy. When I copy the original region and pas

  • HT1277 how do you connect your outgoing mail, it says its constantly offline

    I have tried disconnecting and connecting my mail account a number of times and everytime i have tried to do this the outgoing server says its offline. How do i get it to stay online? Thanks

  • Is anybody else experiencing this problem with IOS5?

    I recently got an iPod Touch 4th generation (last september) and it worked fine until i updated to IOS5. My iPod crashes once in a while (around twice a week), especially when i'm using the iPod camera or when i'm in the music app (trying to find a s