Problem in showing worksheet of discoverer in portal

Hi All,
I have created a worksheet in an user called BI.
I have logged into Portal using user orcladmin.
I have registered the portal provider.
I have added the portlet in the portal page.
I can see the public connect in the edit page.
When i click next in the edit page it shows me the user and share node.
I click the user node it shows me the list of user.
When i click the user BI it show me an error as "An error occurred while handling the request in the controller."
I am not able to see the workbook.
Pls help me.
Regards
Natesh

The problems with the portlet provider. Edit it and do the following:
Uncheck "Web provider in same cookie domain as the portal" and also for the User/Session Information, choose either "Always" or "Once per user session" NOT "never".
Its bug no 4118067 in metalink, the above is a workaround!!

Similar Messages

Discoverer in Portal

I have tried to publish a discoverer workbook and worksheet through Portal with no success. I have built the Discoverer portlet provider, but when I go to edit the worksheets or list of workbooks, I do not get a list of available Discovere workbooks. Any suggestions on how I get my existing workbooks to show in the drop down lists?

The CORBA Error is definitely Discoverer specific. It could be several causes..the Object Activation Daemon (OAD) is overloaded, a misconfiguration, etc.
You mentioned you tested the worksheet with Discoverer Plus; however, the Discoverer Portlet Provider uses the Discoverer Viewer (servlet) as the underlying technology.
I would suggest the following:
1.) Test with Viewer
2.) We do have the capability to turn on some diagnostic tracing via the configuration.xml file
Try this:
· Stop Oracle HTTP Server (Apache)(via EM or $ORACLE_HOME/dcm/bin/dcmctl stop ct ohs)
· Stop Oracle Discoverer Services
· Delete (or copy and delete if you want a backup) the OHS error_log, access_log and the OC4J Discoverer application.log
(<Middle-Tier OH>/j2ee/OC4J_BI_Forms/application-deployments/discoverer/OC4J_BI_Forms_default_island_1/application.log)
· Enable the highest level of logging in the httpd.conf (For example: httpd.conf = LogLevel debug)
· Enable any further Diagnostics for Discoverer Plus/Viewer per: Note. 209582.1 Oracle Discoverer Complete Diagnostics as directed by Oracle Support
Setup additional logging for Discoverer Viewer:
Edit:
<$Middle-Tier OH>/j2ee/OC4J_BI_Forms/applications/discoverer/web/WEB-INF/configuration.xml
Add the logkey parameters like this example:

<server use_log_file="true" logkeys="disco.portlet.debug"/>


· Start Oracle HTTP Server (Apache) (via EM or dcmctl)
· Start Oracle Discoverer Services
· Immediately reproduce the issue
Unfortunately, this is a best efforts forum, so...
3.) you may want to log a Service Request with Oracle Support to help evaluate the diagnostics
Regards,
Steve.

Problems with Pcd Content after restore EP Portal with online Backup

Dear Colleagues,
We have problems to show Pcd Content (Browse and Search) of the Content Administration tab of the EP Portal after restore with a online Backup during Disaster Recovery Test.
Restore has become on a mirror system of Production environment. Ours EP Portal is a cluster system with the following configuration:
Production landscape:
Node 1
Disk K:\ SAP SCS directory. (Clustered)
Disk E:\ SAP Central Instance directory (Local)
Node 2
Disk E:\ SAP Dialogue Instance directory (Local)
Disk M:\ SQL Datafiles. (Clustered)
Disk L:\ SQL Logfiles. (Clustered)
Disaster Recovery landscape:
Only a Node
Disk K:\ SAP SCS directory. (Clustered)
Disk E:\ SAP Central Instance directory (Local)
Disk M:\ SQL Datafiles
Disk L:\ SQL Logfiles
Portal Version
J2EE Engine = 6.40 PatchLevel 105424.313
Portal = 6.0.18.0.0
After restore, the data base as the SAP application starts
correctly but when logon in the Portal, the Pcd Content of Content Administration tab
and to other tabs with similar information is not shown.
After restore it can be necessary to reactivate some type of configuration, links, etc?, for this type of restore is better to make a backup offline instead of online one?
We are thankful for any information on the matter.
Thanks,
Regards.
Rafa R.R.

The issue was solved with a offline backup.

BP interaction history does not show all the activities in portal

Hi Experts,
We have a problem in application CRMM_ACCOUNT when we go to BP interaction history does not show all the activities in portal as it is thr in activities screen.
Regards,
Mark

Hi Glenn Michaels,
Thanks for your response , If I look at the activities tab there were more activities than on the interaction history tab .
In allowed channels for transaction type we have 3 channels.
Can you guide me what to do next?
Regards,
Mark

Poor performance showing BW data in NW portal

Hi all,
we have a problem with showing data from BW in a NetWeaver Portal here.
There is a table with several different entries displayed on a portal page. When you click one entry some details for this are shown in an area below the table.
Now the problem is that every time you click one entry it lasts around 5 seconds until the details are shown which is much to long.
The data to be shown comes from a BW system.
I know that there are a lot of parameters you can check in BW to optimize performance. But maybe I have a common problem here and one of you can tell me which parameters should be check first.
Thanks for all answers in advance!
Best Regards,
Torben

Dear Torben,
The basic things which we need to check in our BW system is:
1) Increase the parallel processing during extraction
2) Selective loading.
3) Every job will be having a priority (A, B, C A being the highest and C being the lowest), choose this based on your scenario.
4) Check with the basis team for the sizing of your server
5) You can increase the number of background processes during data loads. This can be done by making dialog processes as Background processes.
For this you need basis inputs. (This is done in some profile settings by making the system behave differently during loads. (something like day mode/night mode))
6) There are some maintenance jobs that should run regularly in any SAP box to ensure proper functioning.
7) Use of start routines is preferred instead of update routines.
Assign points if these helps u...
Regards,
KK.

My neighbour's Mac Book Pro shows up as discoverable when Bluetooth is turned on in my iPad Air. How can I block her device? How can I prevent her pairing with my iPad Air. I need Bluetooth on to play music over my system.

My neighbour's Mac Book Pro shows up as discoverable in my Bluetooth list on my iPad Air. How can I block her Bluetooth device? How can I prevent her pairing with my device? I need Bluetooth to stream music on my Bose system. Thanks!

If your device is discoverable, the other BT device would try (I am not sure if that would be successful). If it was, it would appear in your system preferences>Bluetooth.
Take a look at this re: security:
http://support.apple.com/kb/PH10786
This is from another Apple article:
Use Bluetooth
You can wirelessly transfer files between computers—even Mac to PC—using the Bluetooth File Exchange utility. You can even browse selected devices and retrieve files remotely. For extra security, you can stipulate that only trusted devices be allowed to connect to your Mac, and 128-bit over-the-air encryption is also available
Barry
P.S. Since I have not had the issue, I have not researched this before. Thank you for making me look into BT security
Message was edited by: Barry Hemphill

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Problem when showing MS power point files on browser.

Hi
     I wrote the code in JSP to show MS power point files on browser. And
I logged session for security as follow.
<%@ page language = "java" import="javax.servlet.*, java.util.*, java.io.*" %>
<%
     String filename = request.getParameter("fileName");
     String path = request.getParameter("path");
     session = request.getSession(true);
     if(session.isNew()) {
          response.sendRedirect("login.jsp");
     }else {
          response.setContentType ("application/vnd.ms-powerpoint");
          int iRead;
          FileInputStream stream = null;
          try {
               File f = new File(path+filename);
               stream = new FileInputStream(f);
               while ((iRead = stream.read()) != -1){
                    out.write(iRead);
               out.flush();
          }finally {
               if (stream != null) { stream.close(); }
%>
     I got problem with showing in Windows XP with MS Office XP only.
Could anyone please give me suggestion.
Thank you.
Atthapon

Hi!
I don't have Office XP. But why you don't try to use application/octet-stream instead of vnd.ms-powerpoint? It should work with it.

We have problem with showing warnings "Inline with Field"s.

We have problem with showing error messages "Inline with Field"s.
1. We have a package ERROR, that collects all errors/warnings. It has a procedure PUT, that saves errors in the variables of the package.
Package ERROR
procedure put(ptable in varchar2, pcolumn in varchar2, pcode in varchar2, pmsg in varchar2);
end;
2. We have a database table. Its values are validated by a trigger (saving business rules).
If an error occurs, then the trigger calls the procedure PUT ( to save an error message).
For example ...
CREATE TRIGGER ...
--- Rule 21
if substr(:new.ka_kood,1,1) != :new.s_kat then
error.put('TABLE1','COLUMN1', -20167, ' MESSAGE 1 !');
end if;
END;
3. I have a form of HTML DB that updates the table TABLE1
I want to show this error message with the field COLUMN1 (Inline with Field) .
I need same validations before and after updating values.
Before update - to validate same input; after update - to show errors saved in the package ERROR.
I also tried to use the global variables. For example ...
WWV_FLOW.g_validation_ids_in_error(1):= 192645056564169139;
WWV_FLOW.g_item_ids_in_error(1):= 192644674113169137 ;
WWV_FLOW.g_validation_message(1):='MESSAGE1';
And this did not help.
To rise errors in programs - is there same API ?
Or there is some other solutions ?
How can I do this in HTML DB?

Andres,
I'm not sure exactly what you are trying to do. But perhaps this will help some. If your after-submit process runs DML that causes triggers to fire, which result in error messages to be accumulated in package variables, you could create a branch on the page that would be conditional on the existence of error messages in the package variables. The branch could be back to the same page or to a more customized error page. The page you branch to would use the error messages in the package variables to determine how to format the page with the error text. The key to doing this is to run it all in the same database session. The way to do that is to use a "direct" branch, i.e., one that does not do a URL redirect. You create this type of branch with the Create Branch wizard (Branch to Page) and do not check the "Branch to page using redirect" checkbox when you see it.
Be sure to roll back any changes you do not want committed before the branch.
Using HTML DB global package variables for anything like what you described is not supported.
Scott

Problem with showing caller information on E90

I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
Regards,
-mats-

unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

Problem with showing mp3 album art in list view.

Hello.
I have litle problem with showing mp3 album artwork in list view.
In SNOW LEOPARD all work fine, and all mp3 files have album art's preview in list mode in finder.
But in LION i have only default preview mp3 icon.
Option "Show icon preview" is already on!

I have the fix!!!!
I have had the same issue ever since Lion. Its been very painful not having album art preview in finder or the play button when rollover the file for so many versions of OSX. Today I worked hard in trying to solve the problem since Applecare support hasn't helped much, all they did was tell me to bring the computer in. The other main reason I got so motivated to try and fix this is because the DJ app for Mac only reads album art from the finder even if iTunes can display the album art. The other reason that got me curious is that my friends macbook pro album art worked fine, so I cross checked with his computer until I figured out a few things that helped and ultimately fixed the issue. FINALLY!
My set up:
- I have my full iTunes library folder on my external as I have over 700GB of music.
- It includes all my database files in there, which is very important as I have many playlist settings from over 7 years of iTunes activity.
SOLUTION:
1. With every new computer I have purchased, I use to just pressed option on Mac and press iTunes to locate my folder (which I have said is located on my external drive).
2. I tried today to press option again BUT locate and selected the default library in the user/music folder of my internal drive (standard setting from Apple).
3. Miraculously, all the album art appeared in both my external drive library and also today's downloaded songs on my Macbook pro. Ofcourse with the new default location I don't have any songs or data.
4. So I tried to find a way to keep this library data on my internal drive since it can help the finder display all my files properly, yes even have the play on rollover button but as well link it back to my external drive with all my 700GB songs.
5. I then went into iTunes Preferences/Advance tab and in iTunes Media folder locationredirected the location to my external drive iTunes/ iTunes Media folder. If it asks to collate data, press NO.
6. Then I quit iTunes.
7. Next I copied the 4 files to my desktop from my external drive as I want to keep the data I have made with all my playlists etc. The four files are iTunes Library Extras.itdb ,iTunes Library Genius.itdb , iTunes Library.itl , iTunes Library.xml
8. I then went to my internal drive User/Music/Itunes/ and dragged these 4 files I copied from my external drive into here and making sure to REPLACE the four existing files already there.
9. Next open iTunes and you will find all your presettings appear with all your music linked to your external. What this does is keep the important library files on your internal drive (that somehow makes your finder files album art appear), BUT to read also all the music mp3 files located in the external drive (action from step 5)
Presto!! All your music files whether on internal drive or external all the album art has appeared.
Hope this helps!! Let me know if there are any other questions.
I am on 10.8.1 running retina macbook pro.

Install Discoverer AND Portal in the same Middletier Instance

Hallo,
when installing AS 10.1.2 i have several install options.
When choosing BI / Discoverer i have no Portal in the middletier after the installation finished.
I could install another middletier instance with using the portal option but i want to have Portal installed as component in the existing middletier.
How can i achive this ? (install a single componant into an existing middletier)
Thanks,
Jochen

You cannot do that. You have to do a fresh install of 10.1.2.0.2 and choose Business Intelligence and Forms install type. This install type provides you the ability to install both Discoverer and Portal in the same Oracle Home. Seems like you installed Discoverer from BI CD, which gives you the ability to just install Discoverer. Instead use the EE download or Oracle Application Server main CDs from the CD pack.
Regards
Pavna

Problem in showing worksheet of discoverer in portal

Similar Messages

Maybe you are looking for