Problem in SSO..Please guide

Hello All,
Am trying to establish a SSO connection between EP7 SR2 Sneak Preview Portal and ECC5.0 using Logon Tickets.
Using this link for the same - http://help.sap.com/saphelp_nw2004s/helpdata/en/1c/22afe3b26011d5993800508b6b8b11/frameset.htm
Have downloaded the verify.der certificate and added into R/3 using the STRUSTSSO2 T-code and have added to ACL too.
Problem:
I need to maintain table TWPSSO2ACL using sm30 which am not able to.
When I enter the table name and press enter, then either I hit Display or Maintain, I get an error saying "View/table TWPSSO2ACL can only be displayed and maintained with restrictions".
Am not into R/3...please guide me....
Get the above error even when I select "No Restrictions or Enter condition" from the Restrict Data Range section.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

But then the Connector test is failing. It gives an error as "Connection failed. Make sure user mapping is set correctly and all connection properties are correct"
What needs to be done here?
On the other hand, all this works fine using User-Mapping, the Connector test + the SAP Transaction iView.
Pleae guide.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Similar Messages

Problem in creating workspaces..Please guide

Hello All,
Am facing a problem in creating workspaces in DTR. Am working on EP7 SR2 (SP9)
Have read mostly all related posts on SDN but cannot catch the missing link...Please guide me for the same:
setvars.bat
@echo off
rem Default properties definition for the DTR Client Commandline Tool:
rem -
rem (1) Mandatory: DTR configuration folder:
set DTR_HOME=C:\Documents and Settings\RHunjan
set CFG_DIR=%DTR_HOME%\.dtr
rem Remark: How to find DTR_HOME folder?
rem - In Release 6.40:
rem The default location is C:\Documents and Settings\<user>\.sapnetweaver.
rem - In Release 7.1:
rem Start Netweaver Developer Studio and login to the configuration / client
rem where you would like to work, then choose the menu: 'file' -> 'Switch workspace'.
rem The upcoming dialog shows the currently used Eclipse workspace.
rem The DTR configuration folder is <currently used eclipse workspace>.jdi
rem (2) Optional: Folder with the definition of logging properties:
set LOGGING=%DTR_HOME%\logging.properties
rem (3) Default properties:
rem set DEFAULT_PROPERTIES=-Dvfs.configfolder=%CFG_DIR% -Dvfs.logging=%LOGGING%
dtrshell.bat
@echo off
rem Run DTR Commandline Shell:
rem -
rem (1) Get it running:
rem -
rem - Adapt configuration settings in setvars.bat.
rem - Uncomment the settings for the used archives
rem that fit to the currently used Netweaver Developer Studio.
call setvars.bat
set CLASS_PATH=
rem (2) Used Archives Settings:
rem -
rem Used Archives in 6.40 and 7.00 Netweaver Developer Studio installation:
rem -
set CLASS_PATH=%CLASS_PATH%;com_tssap_dtr_client_vfs.jar
set CLASS_PATH=%CLASS_PATH%;httpclient.jar
set CLASS_PATH=%CLASS_PATH%;httpclientext.jar
set CLASS_PATH=%CLASS_PATH%;com_tssap_dtr_client_commandline.jar
rem Archives from foreign Plugins:
set CLASS_PATH=%CLASS_PATH%;..\com.tssap.sap.libs.xmltoolkit\lib\sapxmltoolkit.jar
set CLASS_PATH=%CLASS_PATH%;..\com.tssap.sap.libs.logging\lib\logging.jar
set CLASS_PATH=%CLASS_PATH%;..\com.sap.tc.jarm\lib\jARM.jar
rem The recommended value for maximum heap size for the JVM to run DTR Commandline client is 256M or higher.
rem You can change the settings based on system resources available.
set VM_PARAMS=-Xmx256m
rem (3) Run DTR Commandline Shell:
rem -
java %VM_PARAMS% -classpath %CLASS_PATH% %DEFAULT_PROPERTIES% com.tssap.dtr.client.commandline.DTRShell %*
===================
I get an error saying:
Exception in thread "main" java.lang.NoClassDefFoundError: com/sap/tc/logging/Lo
cation
 at com.tssap.dtr.client.commandline.DTRShell.<clinit>(DTRShell.java:21)
Please guide......
Awaiting Reply.
Thanks & WArm Regards,
Ritu
Message was edited by:
 Ritu Hunjan

Hello Ritu,
the problem is probably in these lines:
rem Archives from foreign Plugins:
set CLASS_PATH=%CLASS_PATH%;..com.tssap.sap.libs.xmltoolkitlibsapxmltoolkit.jar
set CLASS_PATH=%CLASS_PATH%;..com.tssap.sap.libs.loggingliblogging.jar
set CLASS_PATH=%CLASS_PATH%;..com.sap.tc.jarmlibjARM.jar
For a NW04s studio these paths are not correct, the plugin directories have some version suffix.
rem Archives from foreign Plugins:
set CLASS_PATH=%CLASS_PATH%;..com.tssap.sap.libs.xmltoolkit_2.0.0libsapxmltoolkit.jar
set CLASS_PATH=%CLASS_PATH%;..com.tssap.sap.libs.logging_2.0.0liblogging.jar
set CLASS_PATH=%CLASS_PATH%;..com.sap.tc.jarm_2.0.0libjARM.jar
Please check the folder names in the /eclipse/plugins/ directory to verify that this is correct for your installation.
Regards,
Marc

Repeating Frame Problem - please guide

Dear Gurus,
I am developing a report in reports 6i. The structure of report is something like this.
M1
R1
f1
f2
R2
M1 is a fixed frame containing all other elements. R1 is repeating frame containing
2 fields and one repeating frame.
Now while printing records of R2 overflow to next logical page. that's fine but space of f1 and f2 also get repeated on to next page.
To give an analogy :-
Purchase Order Report
po number - f1
supplier - f2
po lines -r2
next page
empty space present ( equal to the required fields r1 and r2 )
po_lines
Now point is i want the Po lines to continue without the space for fileds for f1 and f2 repeating.
and yes i kept vertical elasticity for M1,R1 and R2 as variable.
How can i solve it.
please guide.
regards ravi

Print Object on property it is "First Page". the structure is like
<code>
M1
R1
f1
f2
R2
</code>
Problem is when r2 overflows to next page, the space for f1 and f2 is also there on next page. What i want is content of r2 should come at the start of the page rather than at the location where its fixed when it's overflowing to next page.
regards

Problem in BW System in Portal..Its urgent.. Please guide

Hello All,
Scenario:
Working in a load balancing landscape
Requirement:
Need to create a BW Report iView (which isnt working)
Problem / Questions:
1. Created a BW System in portal but since its load balancing, please confirm if this is all right:
- Using Logon Tickets Name
- Group = ?group?
- Message Server = ?server?:?port?
- SID = ?r3name?
- Server Port = blank
- SAP Client = blank
- System Type = SAP_BW
- WAS Host = ?server?:?port?
- WAS Protocol = http
- User Mapping Type = admin
2. Tested the connection and the WAS & Connector Tests fail.
3. When I preview the SAP BW Report iView, get a prompt error saying
" session management will not work!
Please check the DSM log file for details.
you can turnoff this alert ..... "
Now, Ive seen many posts which show how can I disable this prompt message but it would not solve the problem. On clicking on "ok" from the above mentioned prompt, I get an error saying "Page cannot be displayed"..
Please guide.....
Its kinda urgent....
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi,
Do the following:
1. Property Category : Connector
Group -> You can check this from the SAP Logon Pad. Click on groups and then click on generate list.
Logical System Name -> <SID>CLNT<Client Number>
Message Server -> You can also find the message server from the SAP Logon Pad or ask the BASIS team. On SAP Logon Pad, click on groups -> You can see the servers in the group.
Remote Host Type -> 3
SAP Client -> You can get this from SAP Logon Pad or contact the BASIS team. A system can have many clients to be particular.
SID -> System ID of your BW system. This would also be available from SAP Logon Pad or contact the BASIS team for information
Server Port = The server port would be 80<System Number> i.e. 8000 if the system number is 00 and 8001 if system number is 01
System Type -> SAP_BW
2. Property Category : ITS
ITS Host Name -> If it's WAS6.40 and above, it would be an integrated ITS which means the ITS hostname is same as your BW System Host Name. i.e. xxxx.abc.com:80<system number>
ITS path -> /sap/bc/gui/sap/its/webgui/
ITS Protocol -> http
3. Property Category : User Management
Logon Method -> SAPLOGONTICKET
User Mapping Type -> admin, user
4. Property Category : WAS
WAS Host = Fully Qualified Domain Name of BW System : 80<system number>
WAS Protocol = http
Check the connection then.
Cheers,
Sunil

Problem in Portal Anonymous Login..Please guide

Hello All,
Am trying Portal Anonymous Login using EP7 SP9 Sneak Preview.
Using link for this - http://help.sap.com/saphelp_nw2004s/helpdata/en/1e/e19f58136e654d9709befa464314f2/frameset.htm
1. Have added 2 users in the UME Property using configtool - anon1,anon2
2. Created a simple PCD Role and assigned a URL iView to it. Changed it authenticationscheme property to Anonymous.
3. Assigned this role to Anonymous Users Group.
Problem:
1. When I access URL http://rp1677:50100/irj/portal/anonymous, am asked for authentication? Why?
2. The anonymous user group contains user Guest. When am trying to add users- anon1 & anon2 into this group, I get an error saying - You are not authorized to assign one or more entities. Perform a new assigned entities search to see the correct status
Am doing this entite process using the administrator login.
Please guide.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi,
There is a step by step guide to implement external facing portal in
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5894">blog</a>
Follow all above steps and if you still get error write here again.
Regards
Abdul.

HT1695 Sir, I have facing Problem in my Device Iphone 5 in Vodafone 2G plan. I have discuss issue with Vodafone Care. All settings from the Vodafone Side are perfect. Still Issues arise in this Device. Please guide me for resolve the issue.

I am from Gujarat. I have Purchased Iphone 5. I have network of Vodafone Limited.
I am facing problem of Network connection in Whats app, safari and other applications for the access. I had post query in service provider network and all setting from there side are perfect. Please guide me in such error.

Please guide me in such error.
What error?
If you want help then you need to provide details as to what's wrong.
What troubleshooting steps have you done?

HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

I am using windows 8. I have downloaded i tunes. but i can not find my i phone any where in i tunes menu. so I am having problem in syncing my phone. please guide me

I am using windows 8. I have downloaded i tunes. but i can not find my i phone any where in i tunes menu. so I am having problem in syncing my phone. please guide me

If the device doesn't appear as shown in the following instructions: http://support.apple.com/kb/HT1386
then the following may help: http://support.apple.com/kb/TS1538

I can not connect to iswifter, some times it is connected and some time it shows " UNABLE TO CONNECT TO SERVER PLEASE CHECK THE INTERNET" but my internet connection is good and other wbe site i can open without any problem. Please guide me..

I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
 Cheers, Tom

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Seems no one care about us .no one replied till no@!!!!@ strange

After downloading & installing application of adobe creative suite cs2 version 6, screen of adobe photoshop cs2 is not opened by clicking icon . message is giving " ausba4.dll " was not present. Please guide me.?

I have downloaded & installed adobe creative suit cs2 version 6 but when I click the icon of adobe photoshop in desktop it is not opened & giving message " this application has failed to start because " ausba4.dll " was not found. reinstalling of the application may fix the problem " I have reinstall & opened many times but even then it is not opened. Please guide me accordingly.

I'd try disabling the Twain_32.8BA plugin in
C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\Import-Export
You can disable the plugin by putting an ~ (tilde) in front of the name or moving the plugin to your desktop.
Then try photoshop cs2 and see if you still get the error message.
I suspect the error has to do with your scanner driver, since photoshop cs2 does not have an ausba4.dll

HT5642 i want restore iphone ios from 6.1.2 to 6.0.1 , please guide me

i want restore iphone ios from 6.1.2 to 6.0.1 , please guide me

@RajaRani: "get home button fix " means. this is a hardware issue..... but one thing i want to ask that when i restore the phone the home button is start working for few minute and the the same problem occur...... i want to restore the ios of the ph is this possible or not.....

Please guide how to set the mask image

Hi All,
i want to set camera images as a background of greeting image( those already in .png formate with white color background ), so when i am trying with following code in my app it is showing the color image in black and white color .
Please guide me how it is work.
I am using following code
-(UIImage)maskImage:(UIImage)image withMask:(UIImage*)mask {
CGImageRef imgRef = image CGImage;
CGImageRef maskRef = mask CGImage;
CGImageRef actualMask = CGImageMaskCreate(CGImageGetWidth(maskRef),
CGImageGetHeight(maskRef),
CGImageGetBitsPerComponent(maskRef),
CGImageGetBitsPerPixel(maskRef),
CGImageGetBytesPerRow(maskRef),
CGImageGetDataProvider(maskRef), NULL, false);
CGImageRef masked = CGImageCreateWithMask(imgRef, actualMask);
return UIImage imageWithCGImage:masked;
}

Hi,
Thank you for the reply.
My problem is related to Oracle Forms. So I go on Help ->Diagnostics ->custom code -> personalize. There I choose my field and PROMPT_TEXT property. But I do not know how to set it properly, so that it allows e.g. only numbers.
Please help me to solve this issue.
Thank you

I want to pursue SAP Career. Please Guide.

Hi,
I am looking to shift from Small level ERP to SAP with following experience:
1. M.COM
2. 8+ Years in Develoment experience in Clipper, VB, SQL.
3. 4+ Domain knowledge of Lean Manufacturing, Finance, Sales & Distribution. These experience in Roles of Project Development, Functional Analyst, Business Process study.
I dont want to start again with ABAP as i did too much coding, but if there is really promising future I would certainly do again.
I am interested in Functional level.
As already 38+ year of age, Please guide which Module should i take. Also is the age will be a problem because of new freshers ?
Guide me .. Thanks
Z

solved

SAP Transaction iView issue...Please guide...urgent

Hello All,
1. I created a SAP Transaction iView.
2. Entered all the required WAS + ITS details and the connection tests are all successful.
3. While creating the iView I selected SAP GUI for HTML as I need to display the the ITS Internet template (from Internet Service)
Query:
1. When I preview the iView, I see the GUI (standard SAP) format but not the webgui.
Please guide.
Systems - EP 7.0 SP9 & ECC 6
Awaiting reply.
Thanks and Warm Regards,
Ritu

by default the iview uses the wingui - you need to change the SAP GUI Type (GuiType) attribute of your iview from wingui to webgui.
That should solve your problem.
Haydn

Problem in SSO..Please guide

Similar Messages

Maybe you are looking for